Deliver ing

Reliability

T e c h n o l o g y

for the Next Generation

Tohatsu Corporation

5-4, 3-chome, Azusawa, Itabashi-ku, Tokyo 174-0051 Japan

Phone: 81-3-3966-3117 Fax: 81-3-3966-0090
www.tohatsu.co.jp

2009 Tohatsu Corporation

Printed in Japan

TOHATSU_2009_INT_081110.indd 1-2

International

08.12.9 9:17:42 AM

TECHNOLOGY AHEAD OF ITS TIME

TLDI (Two-stroke, Low pressure, Direct Injection)
High output alternator

Individual sensors

Equipped with a high output alternator that

6 individual sensors provide constant vital

produces 37amps of power even at

engine information to the ECU for maximum

1,000rpm and a whopping 40amps at

efficiency.

wide-open throttle.

<115hp only>

<115hp only>

Idle noise reduction system

Direct fuel injection into

cylinders

Engine control unit (ECU)

The exhaust gases and the sound are

routed through the labyrinth exhaust.

Due to the design of the cylinder head

The 32 bit engine control unit controls

This process reduces the noise level to

chamber and piston dome, the finely

the fuel injection and ignition timing for

a minimum when exiting above the

atomized fuel mist created by the fuel

TLDI outboards.

waterline through idle port.

injector is injected near the spark plug

<115hp only>

to achieve ideal combustion.

Pistons dedicated to TLDI

outboards

The 32-bit ECU (Engine Control Unit) uses its multiple sensors to give precise fuel injection instructions in accordance to
the operating conditions it detects. This allows the motor to operate at maximum efficiency, giving boaters a great ride
while providing exceptional fuel economy.

Freshwater flushing port

Air compressor

Teflon coated pistons(Equipped on MD

One of TLDI s essential engine

70/90/115) with a concave shape to

components that is the driving force in

A convenient built-in freshwater flush

the head were specifically designed for

system on the side of the engine

simplifies routine engine flushing.

achieving stabilized fuel injection.

TLDI and significantly increase fuel

<115hp only>

combustion efficiency.

*TLDI meets all current regulations stipulated by the EPA (Environmental Protection Agency).

Multifunctional tachometer
The tachometer informs the operator of

Three step trolling speed

control

800rpm

900rpm

potential problems through the meter

indicator and warning lamp.

700rpm

The idling speed can be set to any of

the three rpm ranges, 700, 800 or
900, by adjusting it on your key switch.
This feature allows you to select the
ideal trolling speed for maneuvering
during a variety of current and wind
conditions.

Technology

TOHATSU_2009_INT_081110.indd 3-4

New Paint Coating Process

2-part hardened Acrylic resin coating specially
formulated for marine environment helps protect
the engine from UV or salt water damage.
Acrylic resin high solid paint coat
Epoxy high solid primer undercoat
Chemical conversion treatment
Marine Grade Aluminum Alloy

for

the

Next

Generation

08.12.9 9:18:00 AM

Simple Start. Simple Operation. Simple pleasure.

P o w e rful Acceleration
& E a s y S ta r t i n g
Starting the engine is easy, and once it starts, the ultimate power gets you to
where you need to be...fast and smooth! So go ahead, start the engine and go!

MD 115

TOHATSU_2009_INT_081110.indd 5-6

California C.A.R.B
two star rating
for very low emissions.

Tohatsu TLDI 115 benefits:

Uniquely designed cowling with extra internal layering to
provide a much quieter operation than conventional 2stroke outboards
Equipped with a high output alternator that produces 37
amps of power even at 1000rpm and a whopping 40
amps at 3500-6000 rpm's
Comes standard with a convenient built-in freshwater
flush system that simplifies routine engine flushing
Air assisted direct fuel injection system provides
excellent fuel economy
Excellent horsepower-to-weight ratio
Lightweight and compact
Very low emission, U.S. EPA and CARB approved

08.12.9 9:18:31 AM

Own it. Trust it. Love it.

Tohatsu TLDI benefits:

Air assisted direct fuel injection system provides excellent
fuel economy
Quiet operation
Excellent horsepower-to-weight ratio
Lightweight and compact
Very low emission, U.S. EPA and CARB approved

RELIABILIT Y IS
A N U N D E R S TAT E M E N T
Indulge in some outdoor fun, worry free. The Tohatsu TLDI outboard engine will get
you to your destination and back. You can count on it.

High performance and easy operation:

Inductive ignition system for reliable starting
Outstanding acceleration
Electronic oil pump for more precise oil regulation
throughout the rpm range
Oil reservoir opening located on the top of the motor for
quicker and easier refill onboard
Multi-point oil injection system to more completely
lubricate vital engine components
Power Trim & Tilt
Fundamentals for user convenience and
reliability:
Through-the-prop exhaust for a quieter ride
Thermostatically controlled cooling system for consistent
engine temperature
Stainless steel water pump housing for outstanding
durability
High grade marine aluminum alloy that provides the
ultimate protection against corrosion
Zinc coating on internal water passages for superior
corrosion resistance
User adjustable idle and trolling speeds
Tachometer and Trim & Tilt Gauge*
Aluminum propeller
Remote control box*
Warning and protection:
Low oil level warning (visual and audible)
Overheat warning (visual and audible)
Battery voltage warning (visual only)
Start-in-gear protection for safer engine starting
Safety lanyard (an essential protection feature standard
on all Tohatsu outboards)
Over-rev. limiter
* Remote control models

California C.A.R.B
two star rating
for very low emissions.

TOHATSU_2009_INT_081110.indd 7-8

08.12.9 9:19:05 AM

S av e g a s . S av e t i m e . S av e m o n e y.

Tohatsu TLDI benefits:

Air assisted direct fuel injection system provides excellent
fuel economy
Quiet operation
Excellent horsepower-to-weight ratio
Lightweight and compact
Very low emission, U.S. EPA and CARB approved

Excep tional Fuel Economy

From a short and leisurely stroll to a full day of fun; either way, you can rely on Tohatsu's
exceptional fuel economy to keep you going. This means more money in your pocket and
less trips to the pump!

High performance and easy operation:

Inductive ignition system for reliable starting
Outstanding acceleration
Oil reservoir opening located on the top of the motor for
quicker and easier refill onboard
Multi-point oil injection system to more completely
lubricate vital engine components
Power Trim & Tilt
Fundamentals for user convenience and
reliability:
Through-the-prop exhaust for a quieter ride
Thermostatically controlled cooling system for consistent
engine temperature
Stainless steel water pump housing for outstanding
durability
High grade marine aluminum alloy that provides the
ultimate protection against corrosion
Zinc coating on internal water passages for superior
corrosion resistance
User adjustable idle and trolling speeds
Tachometer and Trim & Tilt Gauge*
Aluminum propeller
Remote control box*
Warning and protection:
Low oil level warning (visual and audible)
Overheat warning (visual and audible)
Battery voltage warning (visual only)
Start-in-gear protection for safer engine starting
Safety lanyard (an essential protection feature standard
on all Tohatsu outboards)
Over-rev. limiter
* Remote control models

California C.A.R.B
two star rating
for very low emissions.

TOHATSU_2009_INT_081110.indd 9-10

08.12.9 9:19:29 AM

SMART TECHNOLOGY

All Four-stroke models meet current regulations stipulated by the EPA (Environmental Protection Agency) in 2006.

MFS

20 / 15 / 9.8 / 8
Air-silencer system

MFS

Our air-intake system has

a large volume air silencer
to ensure engine starting
and to suppress air-intake
noise during engine
operation.

30 / 25

MFS

6 / 5 / 4 / 3.5 / 2.5
Propeller hub exhaust

Simple steering friction lever

Through-the-prop exhaust is used

to achieve nice, quiet running
conditions.
<6/5/4>

The steering friction lever, located at the

front of the motor, allows the steering
friction to be adjusted for both steady
running at high speed and easier
maneuvering while trolling.
(tiller model only)
<20/15>

Tubular air-intake

The tubular structure of the airintake, originally developed by

Tohatsu, helps to take in
necessary airflow to the engine
while preventing water from
entering into the motor cover.

Wide anti-cavitation
plate with trim tab

Front shift

The shift lever is located on

the front of the motor for
easier operation.

The tuned intake manifold

provides increased low & mid
speed torque and quieter
operation.

Engine control unit

360
ust

Battery-less electronic
fuel injection

Exha

The 16 bit ECU precisely

controls the fuel injection and
ignition timing for 4-stroke
engines.

A ir

The industry's first battery-less

electronically controlled fuel
injection provides quick
throttle response, excellent fuel
economy, and very smooth
rides on the water.

Offset engine

360 full pivot steering

An easy view
sight-gauge

The outboard can be turned to

any direction, up to 360
degrees, for simple steering
that is needed for small boats.
<3.5/2.5>

Its easy to check oil levels

with the oil level indicator
located on the side of the
engine.
<3.5/2.5>

Integral tank

With a built-in fuel tank

conveniently located on top, the 4
hp*, 3.5 and 2.5 becomes ready
for cruising quickly and without
taking up extra space in the boat.
An external fuel fitting also
comes standard with the 4hp
model to allow the motor to hook
up to a remote fuel tank as well.

Technology

TOHATSU_2009_INT_081110.indd 11-12

This Tohatsu patented

powerhead design is tilted
15 degrees to the right inside
the lower motor cover to
create a compact top cowling
design and also help with
portability.
<3.5/2.5>

The twist type throttle control

provides quick steering as well
as one-handed operation
capability.

The wide anti-cavitation plate

effectively restrains the propeller
from cavitating. The large trim tab
helps to achieve effortless steering
at high speeds while also providing
corrosion protection.

Tuned intake manifold

Throttle grip

for

Four point dampening

system

The specifically designed motor

dampening system reduces
vibration at all rpm ranges.
<3.5/2.5>

the

Next

Generation

08.12.9 9:19:48 AM

M a x i m u m P o w e r . M a x i m u m E f f i c i e n c y.

Tohatsu 4-stroke 30/25 benefits:

Designed with proven technology
Advanced cross-flow induction for smooth operation
Canister style oil filter for easy replacement
Larger capacity oil reservoir for optimum lubrication
Tuned intake system for crisp takeoffs
Ultra low emissions, U.S. EPA and CARB approved

I n n o va t i o n
Can't be Beat!
Tohatsu introduced the industry's first battery-less electronic fuel injection system, taking these 30/25 models to
the next level! You just can't beat the power, efficiency, reliability and innovation that Tohatsu outboard's
reputation was built on.

MFS 30/25

TOHATSU_2009_INT_081110.indd 13-14

High performance and easy operation:

Electronic fuel injection
The boating industrys first battery-less, manual start EFI 4-stroke
Digital CD ignition system for quicker starts
Large alternator and rectifier for superior battery charging
Adjustable steering friction* and trim tab for reducing
steering effort
Front mounted shift lever for easier operation
Trim settings, 6 positions*
Gas assisted tilt (25)*
Power trim & tilt*
Remote control**
Fundamentals for user convenience and reliability:
Through-the-prop exhaust for a quiet ride
Thermostatically controlled cooling system for consistent
engine temperature
Stainless steel water pump housing for outstanding
durability
High grade marine aluminum alloy that provides the
ultimate protection against corrosion
Zinc coating on internal water passages for superior
corrosion resistance
Decompression device for ease of manual starts
Plastic 25 liter fuel tank for 30 and 25 include fuel fittings
and fuel line
Aluminum propeller
Warning and protection:
Low oil pressure warning (visual and audible)
Overheat warning (audible)
Safety lanyard (an essential protection feature standard
on all Tohatsu outboards)
Start-in-gear protection for safer engine starting
Over-rev. limiter
* Certain models ** Remote control models

California C.A.R.B
three star rating
for ultra-low emissions.

08.12.9 9:20:25 AM

TOHATSU outboards receives Motorboating

magazine's 2004 Editor's choice award for
new lightweight yet powerful compact 9.8HP
4-Stroke

Hanging Tough
Don't let the small size fool you. These powerful engines are built tough enough to handle
harsh marine conditions. Whether you like a smooth ride or a little rough water, these
outboards are built to last. You can't ask for a better
partner out on the water than Tohatsu!

NEW
MFS 15/20
New this year! Our 15hp
and 20hp with power tilt
for better operation!
This new 4-stroke is prefer
for inflatables and small
fishing boats.
California C.A.R.B
three star rating
for ultra-low emissions.

MFS 20/15/9.8/8

TOHATSU_2009_INT_081110.indd 15-16

Light and compact power tilt and

transom bracket

Built Strong. Built Tough. Built to Last.

Tohatsu 4-stroke benefits:

Light and compact!
Designed with proven technology
Advanced cross-flow induction for smooth operation
Available in a wide variety of models
Canister style oil filter for easy replacement <20/15>
Larger capacity oil reservoir for optimum lubrication
Tuned intake system for crisp takeoffs
Greatly reduced induction noise for a quieter ride
Trim tab reduces steering effort, functioning also as the
sacrificial anode that protects the engine from electrolysis
Ultra Low emissions, U.S. EPA and CARB approved
Easy operation and handling:
Digital CD ignition for easier engine starting, quicker
throttle response and smoother trolling
Fast-idle choke system allowing easier manual choke operation <9.8/8>
Recoil starter with larger reel making manual starting fast and easy
Large alternator and rectifier for superior battery charging
Front mounted shift lever for easier operation
Remote control models available <20/15/9.8>
Trim settings, 6 positions*
Adjustable steering friction* for reducing steering effort
Fundamentals for user convenience and reliability:
Through-the-prop exhaust for a quieter ride
Thermostatically controlled cooling system for consistent
engine temperature
Stainless steel water pump housing for outstanding durability
High grade marine aluminum alloy that provides the
ultimate protection against corrosion
Zinc coating on internal water passages for superior
corrosion resistance
Plastic 12 liter fuel tank include fuel fittings and fuel line
with fuel gauge on the cap
Aluminum propeller
Protection:
Low oil pressure warning <20/15>*
Low oil pressure indicator <9.8/8>
Safety lanyard (an essential protection feature standard
on all Tohatsu outboards)
Start-in-gear protection for safer engine starting
Over-rev. limiter
* Certain models

08.12.9 9:21:58 AM

E a s y t o C a r r y. E a s y t o I n s ta l l . E a s y t o U s e .

Tohatsu 4-stroke benefits:

Light and compact!
Designed with proven technology
Greatly reduced induction noise for a quieter ride
Sacrificial anode that protects the engine from electrolysis
Ultra Low emissions, U.S. EPA and CARB approved

True Convenience
Lightweight and portable, these models also offer the most
convenience. Our 3.5/2.5 hp models have a throttle grip on the
steering handle and a 360 degree full pivot
steering. How's that for convenience?
Boating is not meant to be complicated.
With Tohatsu, boating is simple.

NEW

MFS 6
New Power Option for Sailboats!
Tohatsu's uniquely designed 6 hp, 4-stroke motor is
ideal for sailboats or any marine vessel requiring a
Built-in 5 amp/12V
charging system

25" shaft outboard motor.

Lightweight and portable, the Ultra-long also comes
equipped with a 5
amp/12V charging
system, charging cable

California C.A.R.B
three star rating
for ultra-low emissions.

MFS

6/5/4/3.5/2.5

TOHATSU_2009_INT_081110.indd 17-18

and a high thrust sail

drive propeller.
Charging cable included

Equipped with the high thrust

sail drive propeller

Easy operation and handling:

Digital CD ignition for easier engine starting, quicker
throttle response and smoother trolling
Fast-idle choke system allowing easier manual choke operation
Recoil starter with larger reel making manual starting fast and easy
Shallow water drive <6/5/4>
Adjustable steering friction for reducing steering effort
Fundamentals for user convenience and reliability:
Through-the-prop exhaust for a quieter ride <6/5/4>
Thermostatically controlled cooling system for consistent
engine temperature
Stainless steel water pump housing liner for outstanding
durability <6/5/4>
High grade marine aluminum alloy that provides the
ultimate protection against corrosion
Zinc coating on internal water passages for superior
corrosion resistance
Plastic fuel tank
6/5 hp : Separate 12 liter fuel tank with fuel fittings and
fuel line
4 hp : Built-in 1.3 liter includes fuel connector for use with
an optional external fuel tank
3.5/2.5 hp : Built-in 1 liter integral tank
Aluminum propeller <6/5/4>
Protection:
Low oil pressure indicator <6/5/4>
Safety lanyard (an essential protection feature standard
on all Tohatsu outboards)
Start-in-gear protection for safer engine starting <6/5/4>
Over-rev. limiter
* Certain models

08.12.9 9:23:19 AM

R E A D Y. G E T S E T. G O . . . A N D K E E P G O I N G !

The Tohatsu 140, 120, 115, 90, 70, 60, 50 and

40D hp 2-strokes come standard
with the following features:
Tohatsu 2-stroke benefits:
Excellent reliability with proven 2-stroke technology
Simple in design
Fuel & oil automixing for optimum lubrication*

Proven Technology &

Reliable Performance
These Tohatsu 2-strokes are world famous for their reliability, terrific-horsepower-to-weight ratios and top-of-the-line performances!
These in-line 4-cylinder and 3-cylinder outboards provide all of the extra features you want and need without compromising
Tohatsu's well-known quality.
These outboards will give you performance and reliability for your long days of
boating pleasure.

Easy operation and handling:

Loop charged induction for smooth operation and fuel economy
CD ignition system for quicker starts
Power Trim & Tilt*
Remote control**
Oil reservoir located on the top of the motor for quick and easy refills*
Fundamentals for user convenience and reliability:
Through-the-prop exhaust for a quiet ride
Thermostatically controlled cooling system for consistent engine temperature
Stainless steel water pump housing for outstanding durability
High grade marine aluminum alloy that provides the ultimate protection against corrosion
Zinc coating on internal water passages for superior corrosion resistance
Multi-function gauge incorporating a tachometer, an oil level gauge, and a trim meter*
Aluminum propeller
Warning and protection:
Electronic Safety Governor limits engine rpm to protect the outboard against
over-reving
Overheat warning (audible) <40 & 50:Opt.>
Water pressure sensor <140, 120, 115 & 90 only/70 & 60:Opt.>
Safety lanyard (an essential protection feature standard on all Tohatsu
outboards)
Start-in-gear protection for safer engine starting
* Certain models

M 25C3JET

** Remote control models

The Tohatsu 40c, 30 and 25 hp 2-strokes come

standard with the following features:
Tohatsu 2-stroke benefits:
Excellent reliability with proven 2-stroke technology
Simple in design

High capacity Water Pump,

with Chrome Plated Housing

The perfect choice for navigating small boats in shallow

water, white-water rapids, over sand bars, shoals, etc.
Excellent reliability with proven 2-stroke technology.
The Tohatsu jet drives' simplicity in design results in ease of
operation with a minimum of moving parts.

M140/120/115/90/70/60/

W50/50/40C/40/30/25/25C3JET

TOHATSU_2009_INT_081110.indd 19-20

The jet drive power model rating is a designation of actual

performance resulting from the use of a jet pump in
comparison to an equivalent propeller hose power.

Easy operation and handling:

Loop charged induction for smooth operation and fuel economy
CD ignition system for quicker starts
Remote control**
Fundamentals for user convenience and reliability:
Through-the-prop exhaust for a quiet ride
Thermostatically controlled cooling system for consistent engine temperature
Stainless steel water pump housing for outstanding durability
High grade marine aluminum alloy that provides the ultimate protection against corrosion
Zinc coating on internal water passages for superior corrosion resistance
Aluminum propeller
Protection:
Safety lanyard (an essential protection feature standard on all Tohatsu outboards)
Start-in-gear protection for safer engine starting
** Remote control models

08.12.9 9:26:54 AM

Proven Technology & Reliable Oerformance

The Tohatsu 18, 15, 9.9, 9.8, 8 and 6 hp 2-strokes

come standard with the following features:
Tohatsu 2-stroke benefits:
Excellent reliability with proven 2-stroke technology
Simple in design
Easy operation and handling:
Loop charged induction for smooth operation and fuel economy
CD ignition system for quicker starts
Remote control**
Fundamentals for user convenience and reliability:
Through-the-prop exhaust for a quiet ride
Thermostatically controlled cooling system for consistent engine temperature
Stainless steel water pump housing for outstanding durability
High grade marine aluminum alloy that provides the ultimate protection against
corrosion
Zinc coating on internal water passages for superior corrosion resistance
Aluminum propeller

Proven Technology &

Reliable Performance
Tohatsu gives boaters exactly what they need: more power and less weight! All of these truly portable models offer an
incredible horsepower-to-weight ratio. These are the ultimate outboards for convenience and portability.
The 5 weighs only 19 kgs. And the 2.5 and 3.5 weigh in at 12.5 and 13 kgs., respectively! Wherever youre going,
theres a little Tohatsu to take with you!

Protection:
Safety lanyard (an essential protection feature standard on all Tohatsu
outboards)
Start-in-gear protection for safer engine starting
** Remote control models

The Tohatsu 5, 4, 3.5 and 2.5 hp 2-strokes

come standard with the following features:
Tohatsu 2-stroke benefits:
Excellent reliability with proven 2-stroke technology
Simple in design
Easy operation and handling:
Loop charged induction for smooth operation and fuel economy
CD ignition system for quicker starts
Carrying handle
Fundamentals for user convenience and reliability:
High grade marine aluminum alloy that provides the ultimate protection against corrosion
Zinc coating on internal water passages for superior corrosion resistance
Shifting: Forward (F) - Neutral (N) - Reverse (R) <5 only>
3.5B hp: F - N with shift lever, R by 360 degree steerability
3.5A/2.5A hp: F - R by 360 degree steerability
Aluminum propeller (resin propeller on 3.5 & 2.5)
Built-in fuel tank 1.4 liter (3.5 & 2.5)
Built-in fuel tank 2.5 liter (4)
Separate fuel tank with Built-in fuel tank 2.5 liter (5)
Protection:
Safety lanyard (an essential protection feature standard on all Tohatsu outboards)
* Certain models

TOHATSU_2009_INT_081110.indd 21-22

08.12.9 9:29:00 AM

Genuine Tohatsu
Pa r t s a n d Ac c e s s o r i e s

Tohatsu dealers and Authorized Service Centers provide only genuine Tohatsu parts and accessories designed to maximize
your Tohatsu outboard's performance.

Engine Oil & Care Products

Gauges

Propellers

Genuine Tohatsu Engine Oil is specially formulated to work with all Tohatsu engines,
2-strokes, TLDI and 4-strokes. Tohatsu Genuine Oils contain additional additives and
detergents to keep your Tohatsu outboard running at peak performance.

A variety of Tohatsu gauges are available through your local dealer; hour meters, speedometers, tilt/trim gauges, Analog and LCD
tachometers and even multi-function LCD gauges. All manufactured to Tohatsu's precision standards. See your dealer for a
complete list of all Tohatsu gauges available for your outboard.

The propeller selection chart can be used to help you in selecting the correct propeller for your Tohatsu outboard. Remember that in any application,
discrepancies in performance can result due to the different boat hull designs, the final carrying load and your particular needs.

Four Stroke Engine Oil

MD PLATINA OIL
Part Number

Description

Models

Part Number

Description

Models

3Y9-72302-0

1L x 20/1 case

TLDI

3AC-72300-0

1L x 20/case

Four Stroke

3Y9-72304-0

4L x 6/1 case

TLDI

3AS-72300-0

0.45L x 20/case Four Stroke

Control Boxes

Description

0.4L x 20/1 case Two Stroke

3C7-72302-0

1L x 20/1 case

Two Stroke

3C7-72304-0

4L x 6/1 case

Two Stroke

3C7-72303-0

20L x 1/1 case

Two Stroke

These 100mm(4'') 7,000 max

Tachometer are available with or
without warning lamp.
Tachometer can be used on all
electric start models by using
select 4, 6 or 12 pole switch on
rear of meter. Lead wire,
mounting hardware included.

These 100mm(4'') 7,000 max rpm

Tachometer are easy to read LCD
digital readout displays engine rpm,
trim angle, oil level, warning lamps.
Lead wire, mounting hardware
included.

Models

3B7-72530-2

2-Stroke Pre-Mix Oil Model

(without Warning Lamp)

3N8-72640-1
(with Warning Lamp)

4-Stroke & 2-Stroke

Auto Mixing Oil Model

3Z5-72640-1

TLDI Model

(with Warning Lamp)

Part Number

Trim Meter
Magnetic type gauge shown angle for
optimum performance and efficiency.
2/1/16'' diameter. Includes
installation hardware.

Indicates the number of hours your

outboard motor has been
operated to indicate when periodic
services are necessary.
Part Number

3E0-72524-0

Drag Link

Designed for Tohatsu outboards.

Standard features include a fast warm-up lever, Key type ignition switch,
an emergency stop switch , choke switch, PTT Switch (as selected models)
and 6.3M (21FT) wiring harness.

Specially designed for Tohatsu outboards

3B7Q84330-2

Description

RC5A

3B7Q84340-2

RC5B

3B7Q84350-3

RC5C

3B7Q84360-1

RC5D

3C7Q84370-2
3T5Q84500-1
3T5Q84500-1

RC5E
RC5F
RC5F

TOHATSU_2009_INT_081110.indd 23-24

Part Number

Models

3T1-72571-0

All Power Tilt Model

Speedometers
These Speedometers with in M.P.H.
and Km/h. Includes vinyl pipe, sender
and hardware.
Part Number

Description

3E0-72648-0 50 M.P.H. Kit

3/3/8" Diameter
3E0-72649-0 75 M.P.H. Kit
3/3/8" Diameter

Volt Meter

Part Number

Drag Link

3AA-84905-0
3G2-84905-0
3E0-84905-0

Description

Drag Link J
Drag Link G
Drag Link H

Models

25/30hp (4-Stroke)
40-90hp (2-Stroke) with PTT
15-30hp (4-Stroke)
40-90hp (2-Stroke) without PTT
8/9.8hp(4-stroke)
8B-40C (2-Stroke) with electric starter
4-30hp (4-Stroke)
4C-40C (2-Stroke) without electric starter
M120/140A2 (2-Stroke)
MD40/50/70/90B/115A (TLDI)
MD40/50/70/90/115 TLDI

346-84905-1
361-84905-1
3C8-84910-2

Drag Link C
Drag Link B
Drag Link E

Vertical Starting Device Kit

369B05911-0
3B2B05911-0

Model
M4C & 5B
(2-Stroke)
&
MFS4/5/6B
(4-Stroke)
Model

Part Number

M6/8/
9.8B (2-Stroke)
&
MFS8/9.8A3
(4-Stroke)

3E0-72529-0

Water Temperature
Meter

Monitors your cooling water pressure.

Includes vinyl pipe and installation
hardware.

Monitors your cooling water

temperature. Includes vinyl pipe and
installation hardware.

Part Number

Part Number

3E0-72598-0

3E0-72597-0

Model

Model
M9.9/15D2/
18E2 (2-Stroke)
&
MFS15/20C
(4-Stroke)

Propeller Dia
mm
in
188 7.4
188 7.4
188 7.4
188 7.4
188 7.4
Propeller Dia
mm
in
200 7.9
196 7.7
196 7.7
200 7.9
Propeller Dia
mm
in
212 8.0
Propeller Dia
mm
in
216 8.5
226 8.9
216 8.5
226 8.9
226 8.9
Propeller Dia
mm
in
234 9.2
234 9.2
254 10.0
234 9.3
234 9.3
234 9.3
235 9.3

Standard Propeller
M3.5A2 M3.5B2 MFS2.5A/3.5A
4.5 Plastic

6
Plastic
(S,L)

7
Plastic
(S,L)
(S,L)

6 Aluminum

6 Aluminum

Standard Propeller
Pitch Material
M4C
M5B
MFS4B MFS5/6B
6 Aluminum

(S,L)
(S,L)
7 Aluminum

(S,L,UL)
(S,L)
8 Aluminum

9 Aluminum

Standard Propeller
Pitch Material
MFS6B(Sail Pro)
6 Aluminum
(UL)
Standard Propeller
Pitch Material
M6/8B M9.8B MFS8A3 MFS9.8A3
6.5 Aluminum

7 Aluminum (L,UL)

(L,UL)
(S,L,UL)
(L,UL)
7.5 Aluminum

(S)
(S)
(S)
8.5 Aluminum

9.5 Aluminum

Standard Propeller
Pitch Material
M9.9/15D2 M18E2 MFS15C MFS20C
6 Aluminum

7 Aluminum

7 Aluminum

8 Aluminum (L,UL)
(UL)

(S)
(S,L)
(L)
(L)
9 Aluminum
(S)
(S)
10 Aluminum

11.5 Aluminum

= Optiona
Pitch Material

M2.5A2

(S,L)

Part Number
314-64103-0
309-64106-0
3F0-64101-0
309B64107-0
3F0-64102-0
Part Number
393B64512-1
3R1B64514-0
3R1B64516-0
369B64518-1
Part Number
399B64165-0
Part Number
3V1B64510-0
3B2B64514-0
3B2B64515-0
3B2B64517-1
3B2B64519-1
Part Number
362B-64107-0
362B64105-0
3Z0B64514-3*
3BAB64516-0
3BAB64518-0
3BAB64521-0
3BAB64524-0
* = 4 Bladesl

Propeller Dia
mm
in
260 10.2
252 9.9
M25C3/
30A4 (2-Stroke) 252 9.9
252 9.9
&
MFS25/30B
252 9.9
(4-Stroke)
257 10.1
252 9.9
Propeller Dia
Model
mm
in
290 11.4
285 11.2
276 10.9
M40C (2-Stroke) 275 10.8
268 11.6
290 11.4
282 11.1
Propeller Dia
Model
mm
in
290 11.4
307 12.1
M40/
295 11.6
50D2 (2-Stroke)
290 11.4
&
282 11.1
MD40/50B (TLDI)
282 11.1
279 11.0
Model

Pitch Material
8
9
10
11
12
13
14

Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum

Pitch Material
7
8.5
9
10
11
12
13

Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum

Pitch Material
7
9
11
12
13
14
15

Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum

Standard Propeller
M25C3/30A4
MFS25/30B

(UL)
(UL)
(L)
(L)

(S)
(S)

Standard Propeller
M40C

(S,L,UL)

Standard Propeller
M40D2 M50D2 MD40B MD50B

(S,L)
(S,L)

(LL,UL)
(S,L)
(UL)
(S,L)
(LL,UL)
(UL)

= Optiona

Part Number
346B64106-5
3R0B64518-0
3R0B64521-0
3R0B64523-0
3R0B64525-0
3R0B64527-0
349B64529-1
Part Number
348B64108-0
348B64107-0
361B64115-0
361B64109-0
361B64113-0
3T5B64525-0
3T5B64527-0
Part Number
348B64108-0*
3T5B64518-0
3T5B64523-0
3T5B64525-0
3T5B64527-0
3T5B64529-0
3T5B64532-0
* = 4 Bladesl

Propeller Dia
mm
in
305 12.0
292 11.5
292 11.5
295 11.6
292 11.5
MW50
289 11.4
280 11.0
273 10.7
276 10.9
Propeller Dia
Model
mm
in
355 14.0
M60/70C/90A 355 14.0
349 13.8
M115/120/
140A2 (2-Stroke) 336 13.3
&
336 13.3
MD70/90B (TLDI) 330 13.0
324 12.8
Propeller Dia
Model
mm
in
355 14.0
355 14.0
349 13.8
336 13.3
MD115A (TLDI)
336 13.3
330 13.0
324 12.8
Model

Pitch Material
9
10
11
12
13
14
15
16.5
17.5

Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum

Pitch Material
11
13
15
16
17
19
21

Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum

Pitch Material
11
13
15
16
17
19
21

Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum

Standard Propeller
MW50

(L)

Standard Propeller
M115/120/140A2
M60/70C/90A
MB70/90B

(L,UL)
(L,UL)
(L,UL)

Standard Propeller
MD115A

= Optiona

Part Number
353B64101-0
353B64102-0
353B64103-0
353B64104-0
353B64105-0
353B64106-0
353B64107-0
353B64108-0
353B64109-0
Part Number
3N4B64523-1
3N4B64527-1
3N4B64532-1
3N4B64534-1
3N4B64536-1
3N4B64541-1
3N4B64545-1
Part Number
3T1B64523-0
3T1B64527-0
3T1B64532-0
3T1B64534-0
3T1B64536-0
3T1B64541-0
3T1B64545-0
* = 4 Bladesl

Pre-Rigging Kits

Remote Control Fitting Kit

Models

MFS8/9.8A3 (4-Stroke)
M9.9D2/15D2/18E2 (2-Stroke)
MFS15-30B (4-Stroke) &
M60/70C/90A/115/120/
140A2 (2-Stroke)
MD70/90B/115A (TLDI)
M25C3/30A4 (2-Stroke)
M40C (2-Stroke)
M40/50D2 (2-Stroke)
MD40/50B (TLDI)

Converts a manual start from a horizontal to vertical direction pull.

Models

M2.5/3.5A2/
3.5B2 (2-Stroke)
&
MFS2.5A/3.5A
(4-Stroke)

MFS6B(Sail Pro)

Water
Pressure Meter

Vertical Starting Device Kit

Part Number

Model

Monitors your charging system.

Includes harness and installation
hardware.

Our Side Mount and Binnacle Mount control boxes are designed to provide remote throttle & shift control for Tohatsu outboards. Side Mount control boxes come standard with all
Tohatsu remote control models. Binnacle Mount (top mount) control boxes are available for console mounting.

Side Mount Remote Control Box

Part Number

Models

3C7-72646-1 M120/140A2

Hour Meter

Models

3C7-72301-0

Multi Purpose Meter

Part Number

Super Gold
Part Number

Tachometers

M4C/5B (2-Stroke) & MFS4/5/6B (4-Stroke)

M6/8/9.8B (2-Stroke)

TOP MOUNT CONTROLS

This R.C. fitting kit is conversion Remote

Control steering, throttle and shift from
Tiller handle functions.
Part Number

Models

369-83880-2
3B2-83880-3
398-83880-1
3A1-83880-1
361-83880-3
3AS-83880-1
3V2-83880-0
3AC-83880-0

M4C/5B (2-Stroke)
M6/8/9.8B (2-Stroke)
M9.9/15D2/18E2 (2-Stroke)
M25C3/30A4 (2-Stroke)
M40C (2-Storoke)
MFS4/5/6B (4-Stroke)
MFS8/9.8A3 (4-Stroke)
MFS20/30B (4-Stroke)

Single Top Mount Controls

(Right Hand Lever)

Side Mount type Pre-rig kits

Part Number

Applicable Models

3Y7Q84550-4
3Y7Q84550-5

TLDI Models ~2008(XH)

TLDI Models 2009~(XI)

Single Top Mount Controls

(Left Hand Lever)

Applicable Models

3Z5-84550-4
3Z5-84550-5

TLDI Models ~2008(XH)

TLDI Models 2009~(XI)

Description

3U1-84490-0

Single Top Mount Controls

(Right Hand Lever)
Single Top Mount Controls
(Left Hand Lever)
Dual Top Mount Controls

3T1-84490-0
3U1-84540-0

TOP/Dual Binnacle type

Pre-rig kits
Part Number

Part Number

FLASH MOUNT CONTROLS

Dual Top Mount Controls

Flush Mount Controls

Part Number

Description

3U1-84600-0

Flush Mount Controls

(SL3F)

Propeller Hardware Kits

Part Number

Models

3H6-87326-0

M4C/5B (2-stroke)
MFS4/5/6B (4-stroke)
M8/9.8B (2-stroke)
MFS8/9.8A3 (4-stroke)
M9.9/15D2/18E2 (2-stroke)
MFS9.9/15/20C (4-stroke)
M25C3/30A4 (2-stroke)
MFS25/30B (4-stroke)
M40/50D2 (2-stroke)
MD40/50B (TLDI)

3V1-87326-0
3V9-87326-0
3R0-87326-0
3T5-87326-0

08.12.9 9:30:58 AM

Parts and Accessories

Genuine Tohatsu
Pa r t s a n d Ac c e s s o r i e s

Fuel Tanks

Repair Kits and Optional Accessories

Anodes

Trim Tabs

Spark Plug

Easy to replace Zinc Anodes protect the motor from

galvanic corrosion in saltwater environment.

These Trim Tabs are Sacrificial anode metal

protects the engine from corrosion and
reduce propeller torque for easier steering.

Carburetor Repair Kits are include gaskets, float and

needle valve.

Miscellaneous

Fuel Connectors (Tank Male)

3B7-60007-0

These male connectors are located on the fuel tank

side. Metric thread connectors are stainless steel.
Part Number

Description

Models

3E0-70270-0

13mm (5/16'')

All Models

Plastic Fuel Tank

These fuel tank are constructed of High-quality
and UL approved.
The 25L (6.6-gallon) tank includes cap and fuel
level gauge. The 12L (3.1-gallon) tank has not
fuel level gauge.

Fuel Connectors (Tank Female)

Part Number

Description

These female connectors fit tank end of the hose for

quick connect and disconnect

3B2-70167-0

12 Litter (3.1 Gallon)

Part Number

Description

Models

3C7-70177-0

25 Litter (6.6 Gallon)

3B2-70281-0

13mm (5/16'')

All Models

Fuel Connectors (Engine Male)

Fuel Connectors (Engine Female)

These male connectors are located on the engine

side, for fuel hose attachment.

These female connectors fit engine end of the hose for

quick connect and disconnect.

Part Number

Models

Part Number

Description

Models

5-90hp (2-Stroke) &

40-90hp (TLDI)
4-30hp 4-Stroke
120/140hp 2-Stroke

3B2-70260-1

8mm(5/16")

394-70260-0
3C7-70260-0

8mm(5/16")
8mm(5/16")

M5-90hp (2-Stroke)
MD40-90 (TLDI)
MFS4-30hp (4-Stroke)
M120/140hp (2-Stroke)

Description

3B2-70260-1 13mm(5/16")
394-70260-0 13mm(5/16")
3C7-70260-0 13mm(5/16")

Alternator Kit

Long life, fuel resistant hose has quick connect type fitting on tank and engine end. Includes built in primer
bulb in this 2.46m (8 ft)

Charging Rectifier kit

These Alternator Kit are used installing manual

start models.
Provides A.C 12V, power. Supplies A.C. current
which requires either a regulator for lighting or
charging rectifier kit for D.C. battery charging. Kit
include a alternator, screws and clamp for
mounting under flywheel assembly.
Part Number

Description

3H6-06128-0 12V 60W

Models

3H6-76160-0

MFS4/5/6B (4-Stroke)

Models

346-76160-2

M6B through M40C (2-Stroke)

M4C/5B (2-Stroke) &

3V2-76160-0

MFS8/9.8A3 (4-Stroke)

3BJ-76160-0

MFS15/20C (4-Stroke)

3C8-76160-2

M40/50D2 (2-Stroke)

3AC-76160-0

MFS25/30B (4-Stroke)

3AS-06128-0 12V 60W

MFS4/5/6B (4-Stroke)

3B2-06128-0 12V 80W

M6/8/9.8B (2-Stroke)

3V1-06128-0 12V 80W

MFS8/9.8A(4-Stroke)

3V2-06128-0 12V 80W

MFS8/9.8A3 (4-Stroke)

Water Pump Repair Kits include all necessary

replacement water pump. Also available chrome plated
water pump repair kits.
Part Number

3AB-87322-0
3F0-87322-1
369-87322-1
3B2-87322-1
362-87322-1
361-87322-0
3R0-87322-0
3C8-87322-2
3T5-87322-0
3C7-87322-1

Part Number

3B7-60218-1

3H6-60218-0

3V9-60218-0

3B7-60217-1

Models

MFS2.5/3.5A (4-Stroke)
M3.5B2 (2-Stroke)
M4C/5B/MFS4/5/6B (2 & 4Stroke)
M6/8B/MFS8/9.8A3 (2-Stroke)
M9.9/15D2/18E2 (2-Stroke)
MFS15/20C (4-Stroke)
M25C3/30A4/40C (2-Stroke)
MFS25/30B (4-Stroke)
M40/50D2 (2-Stroke)
MD40/50B (TLDI)
M115/120/140A2 (2-Stroke)
MD70/90B/115A (TLDI)

Chrome Water Pump Repair Kit

369-65231-0
3B2-65231-1
362-65231-0
361-65231-0
3C8-65231-2
3F3-65231-1
3B7-65231-0
3C7-65231-0

338-60218-2

Allows for fresh water hook up to the engine for running at idle
or for flushing of cooling passages. Also allows out of water
operation for test run and engine adjustment.

348-60217-0

Part Number

Models

338-60218-2

M2.5/3.5A2/8/9.8B (2-Stroke) &

MFS2.5/3.5A (4-Stroke) & 25-70hp (2-Stroke) &
MD40/50B (TLDI)
M40/50D2 for Manual Tilt (2-Stroke) &
MD70/90B/115A (TLDI) & 70-140hp (2-Stroke)
4-6hp (2&4-Stroke)
9.9-18hp (2-Stroke)
MFS8/9.8A3/15/20C/25/30B (4-Stroke)
M40D2 through M140A2 for PTT (2-Stroke)

Models

M4C/5B/MFS4/5/6B (2 & 4 Stroke)

M6/8/9.8B/MFS8/9.8A3 (2 & 4 Stroke)
M9.9/15D2/18E2/MFS9.9/15/20C (2 & 4 Stroke)
M25C3/30A4/40C/MFS25/30B (2 & 4 Stroke)
M40/50D2 (2-Stroke)
M60/70C (2-Stroke)
M90A (2-Stroke)
MD70/90B/115A/M115/120/140A2 (TLDI & 2-Stroke)

Electric Starter Kit

(For Tiller Handle Models)

Electric Starter Kit

(For Remote Control Models)

Part Number

Description

Models

Converts a manual start engine to an electric start.

3B2-76300-3

with Flywheel

M6/8/9.8B (2-Stroke)
MFS8/9.8A3 (4-Stroke)

3G2-76300-2 with Flywheel

M9.9/15D2/18E2 (2-Stroke)

3BJ-76300-0

MFS15/20C (4-Stroke)

3P0-76300-0

M25C3/30A4 (2-Stroke)

Models

361-76300-0

M40C (2-Stroke)

3B7-70200-3

5-90hp (2-Stroke) & 40-90hp (TLDI)

3C8-76300-0

M40/50D2 (2-Stroke)

3H6-70200-0

4-30hp (4-Stroke)

3AC-76300-0

MFS25/30B (4-Stroke)

3E0-70200-0

120/140hp (2-Stroke)

Part Number

Description

Models

3B2-76100-2

with Flywheel

M8B (2-Stroke)

3B7-60218-1
3H6-60218-0
3V9-60218-0
369-60218-1
3C7-60218-2

3K9-76100-0

with Flywheel

M9.8B (2-Stroke)

3G2-76100-3 with Flywheel

M9.9/15D2/18E2 (2-Stroke)

3P0-76000-0

M25C3/30A4 (2-Stroke)

361-76000-1

M40C (2-Stroke)

4-30hp (2 & 4-Stroke)

3B7-60007-0

40-140hp (2-Stroke & TLDI)

Description

9701-1-1011

NGK BP6HS-10 2.5/3.5hp (2-Stroke)

9701-1-1010

NGK BP7HS-10 4/5/6/8/9.8hp (2-Stroke)

Part Number

9701-1-1005

NGK B7HS-10

9.9/15/18/25/30/40hp (2-Stroke)

9701-1-1009

NGK B8HS-10

50/60/70/90/115/120/140hp (2-Stroke)

9701-1-1108

NGK PZFR6H

MD40/50/70/90B (TLDI)

9701-1-1103

NGK DCPR6E

4/5/6/8/9.8/15/20/25/30hp (4-Stroke)

9701-1-1109

NGK IZFR5J

MD115A (TLDI)

Models

3C8-60217-1 M25C3/30A4/40/50D2 (2-Stroke)

MFS25/30B (4-Stroke)
MD40/50B (TLDI)
3V1-60217-0 MFS8/9.8A3/15/20C (4-Stroke)
348-60217-0 M40C (2-Stroke)
3B7-60217-1 M60C through M140A2 (2-Stroke)
MD70/90B/115A (TLDI)

Models

Safety Lanyard Cords are designed to shut off your outboard in

the event the operator falls overboard (lanyard must be
properly connected to both the outboard and the operator).
Without this important safety feature your outboard would
continue to run, without you at the controls. This item is
necessary to start your outboard.
Part Number

Applicable Models

353-06821-0

All Models

Tohatsu offers a variety of replacement fuel, air and oil filters to keep your outboard running at peak performance.

Filters

Models

MFS2.5/3.5A (4-Stroke)
M2.5/3.5A2/3.5B2 (2-Stroke)
M4C/5B (2-Stroke)
M6/8/9.8B (2-Stroke)
M9.9/15D2/18E2 (2-Stroke)
M25C3/30A4 (2-Stroke)
M40C (2-Stroke)
M40/50D2 (2-Stroke)
M60/70C (2-Stroke)
M90A (2-Stroke)
M115/120/140A2 (2-Stroke)
MFS4/5/6B (4-Stroke)
MFS8/9.8A3 (4-Stroke)
MFS15/20C (4-Stroke)

Applicable Models

336-60007-0

3C8-60217-1

Part Number

Carburetor Repair Kits are include gaskets, float and

needle valve.
3AB-87122-0
3F0-87122-2
369-87122-1
3B2-87122-0
3G2-87122-0
346-87122-0
345-87122-2
3C8-87122-2
3F3-87122-1
3B7-87122-1
3C7-87122-0
3H6-87122-0
3V1-87122-0
3BJ-87122-0

Part Number

These Trim Tabs are Sacrificial anode metal protects

the engine from corrosion and reduce propeller
torque for easier steering.

Carburetor Repair Kit

Part Number

3V1-60217-0

3C7-60218-2
369-60218-1

Replacement Filters

Part Number

TOHATSU_2009_INT_081110.indd 25-26

For use with alternator coils, these provide D.C.

current for recharging a 12 volt battery.
Kit include a rectifier, wiring, mounting, bolt, washer
and clump.
Part Number

MFS4/5/6A2 (4-Stroke)

3V2-76300-0 with Flywheel

Fuel Line Hoses

Engine Flush Attachments

Water Pump Repair Kits

369-022320-0

Oil Filter
Part Number

Models

3R0-07615-0

MFS9.9-30hp (4-stroke)

3AD-02230-0

Part Number

Description

Applicable Models

3T5-10130-0

Air Filter for Compressor

All TLDI model

369-02230-0

Fuel Filter

4hp-20hp (2&4 Stroke)

3B7-02230-0

Fuel Filter

M25C3/30A4 (2-Stroke)

3AC-02230-0

Fuel Filter

MFS25/30B (4-Stroke)

3C7-02230-0

Fuel Filter

M115/120/140A2 (2-Stroke)

3T5-02230-0

Fuel Filter

MD40/50/70/90B (TLDI)

3AD-02230-0

Fuel Filter

9.9-90hp (2-Stroke)

346-02230-0

Fuel Filter

M40C (2-Stroke)

3T1-02230-0

Fuel Filter

MD115A (TLDI)

Water/Fuel Separator Filter

Easily connected between your fuel tank and engine, the 10
micron filter traps over 98% of the water that may be present in
the fuel tank before it reaches your engine.
Part Number

Description

3Y9-02234-0

Water/Fuel Separator Kit

3Y9-02230-0

Replacement 10 micron filter

3T5-10130-0

08.12.9 9:31:37 AM

Specifications
MD115

MD90

MD70

MD50

MD40

MFS30

MFS25

MFS20

MFS15

MFS9.8

MFS8

MFS6 Sail Pro

MFS6

MFS5

MFS3.5

MFS2.5

MFS4

MFS3.5

MFS2.5

6" - 9"

6" - 11.5"

15", 20", 25"

MFS4

FCW 10W-30/40 (SF, SG, SH, SJ, SL, SM)

51.5 kg
Optional: 12V 145W, 12A Std on electric start mdls
MD115

MD90

MD70

MD50

MD40

MFS30

MFS25

MFS20

T w
M140

M120

M115

M90

M70

M60

MW50

M50

M40D

M40C

M30

MFS15

o
M25

MFS9.8

M25 Jet Drive

k
M18

MFS8

MFS6 Sail Pro

MFS6

MFS5

e
M15

M9.9

M9.8

M8

M6

M4

M5

M3.5B

M3.5A

M2.5

Manual
Tiller Handle
1:1
20"

15", 20", 22", 25"

15", 20", 25"

20"

59 kg

M140

M120

M115

*Weight Specification is based on the lightest version. ** FC-W and TCW-3 is a registered trademark of the National Marine Manufacturers Assoc. (NMMA)
LEGEND
S ....... Standard Features
O ....... Optional on Certain Models
Specifications and descriptions are subject to change without notice.

TOHATSU_2009_INT_081110.indd 27-28

M90

M70

M60

5,150 - 5,850
MW50

M50

M40D

M40C

M30

M25

5,200 - 5,600
M25 Jet Drive
S
S
S
S
S
S
S
-

2.15 : 1
4.5" - 6"

6" - 9"

6" - 11.5"
15", 20"

Optional 12V, 80W 7A

M18

M15

M9.9

M9.8

M8

M6

M5

M4

M3.5B

M3.5A

M2.5

*** 6/5/4 hp includes an External Fuel Tank Connector installed on engine to allow user to use an optional external fuel tank

08.12.9 9:59:28 AM

Deliver ing

Reliability

T e c h n o l o g y

for the Next Generation

Tohatsu Corporation

5-4, 3-chome, Azusawa, Itabashi-ku, Tokyo 174-0051 Japan

Phone: 81-3-3966-3117 Fax: 81-3-3966-0090
www.tohatsu.co.jp

2009 Tohatsu Corporation

Printed in Japan

TOHATSU_2009_INT_081110.indd 1-2

International

08.12.9 9:17:42 AM