Command
Description
RNC LOGIN COMMANDS
amos 10.105.219.68
RNC log in IP
lt all
just refresh
strt
to see how many sites are up/down
stc
To Check the status of MUB's for ATM Sites in RNC
st ima
to check the status of IMA Groups in RNC
lst ima
list & Status of IMA Groups in RNC
deb iub_00234
TO UNLOCK IUB
bl iub_00234
TO LOCK IUB
st UHY4488
STATUS OF SECTORS
strt -i iub_00234
STATUS OF PARTICULAR SITE
EXIT FROM RNC
NODE-B LOGIN COMMANDS
amos 10.205.216.201
NODE-B IP to be given
lt all
just refresh
altk
Alarms in RNC/Particular NODE-B
license server
to check whether license installed or not
reload
to give reload to NODE-B when asks for password give rbs
invh
to check whether parameters of license are up or not
lga
alarms log in NODE-B
lgn
to check the which of login to used in site up or down
get . ip
Find All the IP's Which wer given to Node-B
get 0
to see which type of Node-B and site ID and UserLabel this command you have to use when u log in to Node-B only
get tma
to see whether tma is installed in site or not
get . Antennasup
to see the values of AntennaBranch A & B threshold values
lh ru fui get vswr (or) cabx
To Check the VSWR for Sector Antenna Present in Node-B
get radio no
to varify the which no of calls will go out
st
gives the status of all the parameters which are defined in NODE-B.
get radio
TO CHECK CALLS/NUMBER OF RADIO LINKS IN NODE-B FOR SECTORS DEFINED
License Install Commands
open licnese file and save tht in OSS home/cha
amos 10.205.216.199
Login to Node-B
lt all
just refresh
license server
to check whether license installed or not
readclock
to check the time
setclock 2012-07-05 12:00:00
to set the time, time should be GMT time in node(5:30 Back)
ftput /home/ETSARED/cha/Node ID /c/license/licensekeys.xml
path of the license file should be given with respect to where we have save the file in oss
acc licensing updatelicensekeyfile
we are telling to updated license key file
after this press y
user id and password
rbs
IP Adress
NODE-B IP to be given
sFile (string)
/c/license/licensekeys.xml
license server
check whether license installed or not
cvms afterlicense
creating CV
cvset afterlicense
setting the CV and for next reload the node will be loaded with this CV
AntennaBranch B Alarms Clearance Commands
amos 10.205.216.199
Login to Node-B
lt all
just refresh
altk
to check alarms
get . Antennasup
check the threshold values of all sectorsi..e.., 50 , for IBS Site Branch B should be zero
get tma
to check whether tma installed or not, if tma is present at site check internal power value 0 or 1/if its zero make 1
set proxyvalue internalpower 1
setting the internal power value to 1
altk
check for alarms
Password file fault alarm clearance commands
amos 10.205.216.199
Login to Node-B
lt all
just refresh
altk
to check alarms
if alarm exists login to telnet
go to run command telnet 10.105.55.23
user id and password
oss1 user name and password to be given
telnet 10.205.216.198
NODE-B IP to be given
user id and password
rbs
passwd
user id and password
rbs
exit from command promt
altk
check for alarms
cvms
to the create the cv to the node
cvls
to see the cvs
amos site id
login to the perticular of the site
lt all
to the refreshing
get . Rbsid
to the checking the iub in the node
TO THE LOAD THE IUB IN THE NODE
the the open the oss and the coppy the script in the oss after that then go to the winflor
l ls
to the serching for the script in the oss
then coppy the file name in the oss
trun file or the floder name
then be the loaded the script on the node end
get . Rbsid
then be the checking the when iub is loaded in node end or not
amos site id
login to the perticular of the site
to the refreshing command
then be the script running commands in the 3g
lt all
then be the first login the oss
and then be the save the script in the Documents
then be the show the which commands will be in the oss
it is used to show the which of the files in the Documents of the floder
it is used to running license or script in the perticular of the site
l ls
l cd Documents
trun file name
then be the clear the carrier alarms
setclock
setclock 2015-12-21 10:00:00
the change the iub value
amos site
lt all
cvls
cvset after iub loaded
acc 0 manualrestart
enter the site
refreshing command
cv state
cv set command
reloadin commands
2
0
int
poll
cvls
trun iub file
the reloaded the node
check cv go to the place or not
loaded the iub value
reloadin commands
acc security= adaptSecurityLevel
RXMSC:MO=RXOTG-547,SWVER=B1308R069H;
RXPLI:MO=RXOTG-254,UC;
cedr | grep siteid
uer -r iub value
pmr
choice 20
cd Scripts/NodeBTemp; perl NT.pl 2>LogReport
mobatch -o -p 30 List.txt ./cmd.txt ./trail1
egrep 'RRUS12B3 RRU-' *.log>vswr.txt
egrep 'Active*' *.log>Board.txt
egrep 'Startable' *.log>CV.txt
egrep 'Date:' *.log>CV.txt
TO THE EXECUTED THE DUMPING COMM
egrep -i 'RRUS12B3 RRU-' *.log > vswr.txt
egrep -i 'EUtranCellRelation=' *.log > relations.txt
grep -i 'ENodeBFunction=1,EUtranCellFDD=' *.log > FDD_Status_Post.txt
egrep -i ' M | C | m ' *.log > AlarmList_Post.txt
egrep -i 'Critical,' *.log > AlarmCount_Post.txt
st sau
run /home/ESLANAR/vasanth/sau.mos
http://portal.actcorp.in/web/hyd/home/-/act/login?p_auth=6ElYFpTb
TO REFRESHING COMMANDS
acc o manualrestart
y
2
0
int
poll
4G COMMANDS IN NODE END
amos site id
lt all
st fdd
st rru
altk
cabx
set
get
st cell
st sync
TO CHENGE THE USERLABLE TO THE S
amos site id
lt all
get 0
set 0 userlable site id
get 0
q
mixed mode configaration
amos site id
lt all
st gps
deb proxy values of the gps
get . Gpsout
run /home/ESLANAR/vasanth/mixed mode.mos
get . Mixed
st sync
cvms gps enable
deblocking the gps on site
amos site id
lt all
get gps
st gps
deb prox value
y
run/home/ejnoqre/mixedmode.mos
get gps
then the batch running commands
first sine in the oss
and then enter the username and passwd
and then save the site ids on the site.txt
and the enter which commands will be executed in the cmd.txt
and then enter the winfloer
then enter the commands are
l ls
l cd documents
and then running the mobatch of the command
mobatch -o -p 100sites site.txt ./ cmd.txt ./ floder name
and then executed the all of the commands by the using the some of the commands
to be locked the port b
amos siteid
lt all
st fdd
st rru
altk
cabx
st cell
bl prox value
st rfport
bl protb of proxvalue
get . Nooftxantenna
prox
set proxvalue number of tx antenna 1
set proxvalue number ofrxantenna 1
deb proxvalue
License to be loaded
first login the oss
then place script in the oss
then login the winfiol
amos site id
lt all
altk
acl 6
acc 6 UpdateLicekey file
enter the User lable which is to be login
enter the passward for user
then enter the ip address for oss
/home/ejnoqre(or)eslsnar/Documents/SITE ID/XML script in the given
cvms license
MoBatch Command
VSWR
Board
CV
Date
E EXECUTED THE DUMPING COMMANDS
only VSWR
intra neighbours
executed command from the status of the fdd
executed command from the alarms list
exeuted command from the alarmscount
to the check the sau is loaded are not
to the loaded the sau in the site end
TO REFRESHING COMMANDS
to the refreshing
to the conformation
to the restart in the site end
conformation code
to the give the input to the restart
refreshing of the taking time
4G COMMANDS IN NODE END
to the enter the site end
refreshing
to check the site is up or down
to check the site is up or down in the site end
to check the alarms in the site end
to check the vswr in the site end
to be change the value of the any of that
to give the all of the information to the any of the opction
to check cell is in up or down
to the check the sync is evalble or not
CHENGE THE USERLABLE TO THE SITE
to the enter in the site end
to the refreshing command
to check the user lable in that type of the site
then be the change in the user lable by the using the command
then be the change the user lable
to be check the user lable will be change are not
exit for that type of the site id
mixed mode configaration
to the enter the site end
refreshing commands
to be check the status of the gps
when the gps will blocked in the site
then deblocked the gps in the site
to know the all the information from the gps
it is used the to run the mixed mode of the script
to be check the sectors will be true or faluse
to be check the sector will be sync or not
to be create the cv
deblocking the gps on site
to the enter the site end
to the refreshing command
to get the information form the gps
to be check the gps will be true or faluse
then be deblocking the prox value
to the conformation
to get the information form the gps
then the batch running commands
to serching the type of the files in the oss
then enter the documents file in the oss
then running the mobatch to the every of the 100 of the sites and then saved the all of the in the floder name
to be locked the port b
to be login the site end
refreshing command
to know the status of the fdd
to know the site status in the site end
to check the number of the alarms in the site end
to check the vswr in the site end
to know the cell status
to check the prox value of the port b
blocked the prox value in the perticula of the cell
to know the number of port
which sector will be locked the port b then taken the port b prox value
blocked the prox value of the perticular of the sector
to see the number of antennas in the site
to know the prox values of the antenna prox values
then it changed the number of antennas in the prox value in the sector
then it changed the number of receiving antenns in the prox value in the sector
then be the relese the perticular of the cell
License to be loaded
to be login the node
refreshing commands
checking the alarms
to be license status
the see the license level
cv creation
egrep 'port_' *.log>vswr.txt{{for 3g}}
cabx | egrep 'RRUS12B3 RRU-'
pr relation
hget EUtranCellFDD State|barred|primaryPlmnReserved
alt
alt
eaw BSC name
RLCRP:CELL=ALL;
RLCRP:CELL=CELL ID;
RLSLP:CELL=CELL ID;
RXTCP:MOTY=RXOTG,CELL=CELL ID;
RXMFP:MO=RXOCF-TGVALUE;
RXMFP:MO=RXOTRX-TG VALUE-0&&11;
RXMSP:MO=RXOTX-TGVALIE-0&&-11;
RXMSP:MO=RXOTG-TGVALUE-0&&-11;
RXASP:MO=RXOTG-TGVALUE;
to check the status of a site which is down
RXMFP:MO=RXOCF-TGVALUE;
RXAPP:MO=RXOPT-TGVALUE;
RADEP:DEV=RBLT2-DEVICENUMBER;
NTCOP:SNT=RTMNUMBER;
DTSTP:DIP=DIPID;
RRSCP:SCGR=Tgvalue;
ntcop:snt=all;
gdstp;
ioexp;
stdep:dev=device numbers;
tpble:sdip=etmvalue;
dtbli:dip=dipvalue;
dtble:dip=dipvalue;
tdcop:sdip=etm value;
rldep:cell=cell id;
rlsgp:cell=cell id;
rxscp:scgr=chgr,sc=sctype,numdev=numdevnumber;
rldgp:cell=cell id;
rlpgs;
saosp;
gdstp;
laeip:suname=sumuber;
csbp;
expop:rp=all;
cpfls;
aploc;
gst
To show the site in msc or not
in bsc commands
RRSCI:SCGR=277,SC=1,DEV=RBLT2-9537,NUMDEV=31,DCP=287,;
RRSCE:SCGR=277,SC=0;
to the login the perticular of the BSC
Login to the perticular of the BSC and then be show the which of the sites in the bsc
this command is used to the status of the perticular of the site of (BCCH,CBCH,SDCCH,GPRS)
this command is gives the status of that cell(means ,call of that cell.in USE column , it shows SPEECK , GPRS)
This command gives the site status (down or not ), in NCH cloumn all will be zero . Otherwise et will have some values in all the
This command gives the TG values of that cell(with this we can find the number of cabinets also)
This command is used to know the Cfstatus (site status ). Cfmeans controlling function .status is OPER if CF is in operation oth
This command will give the status of each TRX . (Status as OPER OR NOOP., IF NOOP, beside that BLO will appear)
This command will give the site status (CF,LS, CON, TRX,TX , RX, TS,TF).With single command we will come to know all these
Gives all the alrms in that TG(cainet);
Gives the Cfstatus . When the site is down it will show MOOP in the STATE, other wise it will be OPER.
this command will give the RBLT2 with Device numbers
This command is gives the ETM value (device numbers will be like 5061to 5085).at the end in SNTINL it gives one number. Th
Gives ALL THE dips(0TO 62E1s will be there in an ETM )of that ERM. Gives DIP name rom this . Go to the number found in SN
Gives the dip status . It will be WO In the state column if e1 is working fine. Other wise it may be ALS,RDI.
to check the supper cahannel group events
to show the even dip value
to check the supper channel working or not
to known the gsp model and saftware
to know the dip status and dip activeite or not
to relese the etm value
to block the dip
to relese the dip value
position of rp
to see no of saftet ware avalible
to go from cp to apg
get before set
37,NUMDEV=31,DCP=287,;
directlu as below
