ROUGH TERRAIN CRANE
TR-250M
JAPANESE SPECIFICATIONS
TR
OUTLINE
SPEC. NO.
4-section Boom,
2-staged Power Tilt Jib
X-type Outrigger
TR-250M-7-00101
Control No. JA-01
411
Return to index
TR-250M-7-00101
TR-250M
CRANE SPECIFICATIONS
CRANE CAPACITY
9.5m Boom
16.5m Boom
23.5m Boom
30.5m Boom
8.0m Jib
13.0m Jib
Single top
25,000kg
19,000kg
12,500kg
7,000kg
3,000kg
2,000kg
3,500kg
SINGLE TOP
at
at
at
at
at
at
3.5m
4.0m
5.0m
8.0m
72
76
(
(
(
(
(
(
(
8part-line)
6part-line)
4part-line)
4part-line)
1part-line)
1part-line)
1part-line)
Single sheave. Mounted on main boom head for single
line work.
HOIST
Driven by hydraulic motor and via spur gear reducer.
With free-fall device.
Automatic brake (with foot brake for free-fall device)
2 single winches
With flow regulator valve with pressure compensation
MAX.LIFTING HEIGHT
Boom
Jib
31.3m
44.2m
BOOM ELEVATION
1 double-acting hydraulic cylinder
With flow regulator valve with pressure compensation
MAX.WORKING RADIUS
Boom
Jib
28.0m
35.0m
SWING
BOOM EXTENSION
Hydraulic motor driven planetary gear reducer
Swing bearing
Swing free/lock changeover type
Negative brake
21.0m
OUTRIGGERS
BOOM EXTENSION SPEED
MAIN WINCH SINGLE LINE WINDING SPEED
Fully hydraulic X-type (floats mounted integrally)
Slides and jacks each provided with independent
operation device.
Fully extended width
6.3m
Middle extended width
5.9m, 5.0m, 3.6m
Minimum extended width
3.1m
120m/min (4th layer)
OPERATION METHOD
MAIN WINCH HOOK SPEED
Hydraulic pilot valve operation
15.0m/min (8 part-line)
MAX. VERTICAL LOAD CAPACITY OF OUTRIGGER
AUXILIARY WINCH SINGLE LINE WINDING
SPEED
26.8t
120m/min (4th layer)
PTO wet multi-plate clutch
BOOM LENGTH
9.5m - 30.5m
21.0m/90s
JIB LENGTH
8.0m, 13.0m
POWER TAKE-OFF
AUXILIARY WINCH HOOK SPEED
HYDRAULIC PUMPS
120m/min (1 part-line)
BOOM ELEVATION ANGLE
2 variable piston pumps
2 gear pumps
0- 83
HYDRAULIC OIL TANK CAPACITY
BOOM ELEVATION SPEED
380 liters
0- 83/45s
SAFETY DEVICES
SWING ANGLE
4-section hydraulically telescoping boom of hexagonal
box construction
(stage 2: sequential; stages 3,4: synchronized)
Automatic moment limiter (AML)
Swing automatic stop device
Elevation slow down and stop device
Over-winding cutout device
Working area control device
Free-fall interlock device
Outrigger extension width detector
Winch drum lock
Level gauge
Hook safety latch
Hydraulic safety valve
Telescopic counterbalance valve
Elevation counterbalance valve
Power tilt counterbalance valve
Jack pilot check valve
Swing lock
BOOM EXTENSION
EQUIPMENT
2 double-acting hydraulic cylinders
1 wire rope type telescoping device
Air-conditioner with dehumidifier
Hydraulic oil temperature indication lamp
Radio
Oil cooler
Visual-type winch drum rotation indicator
Operation pedals
ISO arrangement: for telescoping/auxiliary hoisting
TADANO arrangement: for elevating/telescoping
Television (option)
360continue
SWING SPEED
2.6min-1 (rpm)
WIRE ROPE
Main Winch
16mm x 170m (Diameter x Length)
Spin-resistant wire rope
Auxiliary Winch
16mm x 98m (Diameter x Length)
Spin-resistant wire rope
BOOM
JIB
Quick-turn type (2-staged type which stores alongside
below the base boom section and extendible from under
the boom (with 2nd stage being a pull-out type))
Hydraulic non-stage offset (5- 45) type
412
TR-250M-7-00101
CARRIER SPECIFICATIONS
GENERAL DATA
ENGINE
DIMENSIONS
Model
MITSUBISHI 6M60 - TLE2A
(with turbo charger and air cooler)
Type
4-cycle, 6-cylinder, direct-injection, water-cooled
diesel engine
Piston displacement 7,545cc
Max. output
200kW {272PS} at 2,700min-1{rpm}
Max. torque
785N.m {80.0kgf.m} at 1,400min-1{rpm}
Overall length
Overall width
Overall height
Wheel base
Tread Front
Rear
TORQUE CONVERTER
WEIGHTS
3-element, 1-stage unit (with automatic lock-up
mechanism)
Gross vehicle weight
Total
Front
Rear
TRANSMISSION
Automatic and manual transmission
Power shift type (wet multi-plate clutch)
4 forward and 1 reverse speeds (with Hi/Low settings)
26,495kg
13,250kg
13,245kg
PERFORMANCE
Max. traveling speed
Gradeability (tan )
Min. turning radius
REDUCER
Axle dual-ratio reduction
DRIVE
2-wheel drive (4X2) / 4-wheel drive (4X4) selection
FRONT AXLE
49km/h
0.57
5.0m (4-wheel steering)
8.4m (2-wheel steering)
Note:
This crane is covered by Class C Conditions under the
Basic Running Conditions of the Road Traffic Act.
Full floating type
REAR AXLE
Full floating type
SUSPENSION
Front
Hydro-pneumatic suspension (with hydraulic lock cylinder)
Rear
Hydro-pneumatic suspension (with hydraulic lock cylinder)
STEERING
Fully hydraulic power steering
With reverse steering correction mechanism
BRAKE SYSTEM
Service Brake
Hydro-pneumatic disk brake
Parking Brake
Mechanically operated, internal expanding duo-servo
shoe type acting on drum at transmission case rear.
Auxiliary Brake
Hydrodynamic retarder
Electro-pneumatic operated exhaust brake
Auxiliary braking device for operations
FRAME
Welded box-shaped structure
ELECTRIC SYSTEM
12 V DC. 2 batteries of 24V (120Ah)
FUEL TANK CAPACITY
300 liters
TIRES
Front
Rear
11,130mm
2,620mm
3,455mm
3,500mm
2,170mm
2,170mm
385/95R25 170E ROAD
385/95R25 170E ROAD
CAB
One-man type
With interior equipment
Liquid filled rubber mounted type
Fully adjustable foldable seat
(with headrest, armrest and seat belt)
Adjustable handle (tilt, telescoping)
Intermittent type windshield/roof wiper (with washer)
Power window
Side visor
SAFETY DEVICES
Emergency steering device
Suspension lock device
Rear wheel steering lock device
Engine over-run alarm
Overshift prevention device
Parking brake alarm
Powered mirror for right side of boom
Monitor TV for left side of boom
EQUIPMENT
Centralized oiling device
Electric mirror
413
TR-250M-7-00101
TOTAL RATED LOADS
(1) With outriggers set
[BOOM]
Unit : ton
Unit : ton
Outriggers fully extended (6.3m) -360
-
Outriggers middle extended (5.9m) -Over sides-
9.5m
16.5m
23.5m
30.5m
2.5m
25.0
19.0
12.5
3.0m
25.0
19.0
12.5
3.5m
25.0
19.0
12.5
7.0
4.0m
23.0
19.0
12.5
4.5m
21.2
18.0
5.0m
19.4
5.5m
17.8
6.0m
9.5m
16.5m
23.5m
2.5m
25.0
19.0
12.5
3.0m
25.0
19.0
12.5
3.5m
25.0
19.0
12.5
7.0
7.0
4.0m
23.0
19.0
12.5
7.0
12.5
7.0
4.5m
21.2
18.0
12.5
7.0
16.7
12.5
7.0
5.0m
19.4
16.7
12.5
7.0
15.6
11.85
7.0
5.5m
17.8
15.6
11.85
7.0
16.3
14.6
11.2
7.0
6.0m
16.3
14.6
11.2
7.0
6.5m
15.1
13.8
10.6
7.0
6.5m
15.1
13.8
10.6
7.0
7.0m
13.7
13.0
13.0
30.5m
10.1
7.0
7.0m
12.6
10.1
7.0
8.0m
10.55
9.1
7.0
8.0m
9.7
9.1
7.0
9.0m
8.5
8.2
6.4
9.0m
7.7
8.2
6.4
10.0m
7.05
7.4
5.9
10.0m
6.3
7.0
5.9
11.0m
5.85
6.4
5.35
11.0m
5.2
6.0
5.35
12.0m
4.95
5.5
4.9
12.0m
4.35
5.1
4.9
13.0m
4.2
4.75
4.5
13.0m
3.7
4.35
4.5
14.0m
3.6
3.15
4.1
4.15
14.0m
3.8
4.05
15.0m
3.6
3.85
15.0m
3.3
3.6
16.0m
3.15
3.45
16.0m
2.85
3.15
17.0m
2.8
3.05
17.0m
2.5
2.75
18.0m
2.45
2.7
18.0m
2.2
2.45
19.0m
2.15
2.45
19.0m
1.95
2.2
20.0m
1.9
2.2
20.0m
1.7
1.95
21.0m
1.7
1.5
1.75
1.95
21.0m
22.0m
1.75
22.0m
1.55
24.0m
1.4
24.0m
1.2
26.0m
1.15
26.0m
0.95
28.0m
0.95
27.9m
0.75
a ( )
0 83
a ( )
A= Boom length B= Working radius
a= Boom angle range (for the unladen condition)
414
0 83
TR-250M-7-00101
[BOOM]
Unit : ton
Unit : ton
Outriggers middle extended (5.0m) -Over sides-
Outriggers middle extended (3.6m) -Over sides-
A
B
9.5m
16.5m
23.5m
30.5m
2.5m
25.0
19.0
12.5
3.0m
25.0
19.0
12.5
3.5m
25.0
19.0
12.5
7.0
4.0m
23.0
19.0
12.5
4.5m
21.2
18.0
5.0m
18.4
5.5m
15.4
6.0m
A
B
9.5m
16.5m
23.5m
30.5m
2.5m
25.0
19.0
12.5
3.0m
25.0
19.0
12.5
3.5m
20.5
19.0
12.5
7.0
7.0
4.0m
16.0
15.7
12.5
7.0
12.5
7.0
4.5m
12.8
12.6
12.5
7.0
16.7
12.5
7.0
5.0m
10.7
10.5
11.0
7.0
15.0
11.85
7.0
5.5m
9.05
8.8
9.4
7.0
13.0
12.6
11.2
7.0
6.0m
7.7
7.6
8.2
7.0
6.5m
11.2
10.8
10.6
7.0
6.5m
6.6
6.5
7.25
7.0
7.0m
9.5
5.8
9.4
10.1
7.0
7.0m
5.6
6.4
6.5
8.0m
7.3
8.0
7.0
8.0m
4.4
5.05
5.3
9.0m
5.85
6.5
6.4
9.0m
3.4
4.05
4.35
10.0m
4.75
5.4
5.6
10.0m
2.7
3.3
3.65
11.0m
3.9
4.55
4.8
11.0m
2.15
2.75
3.05
12.0m
3.3
3.85
4.15
12.0m
1.7
2.3
2.6
13.0m
2.75
3.3
3.55
13.0m
1.3
1.9
2.2
14.0m
2.3
1.0
2.85
3.1
14.0m
1.6
1.85
15.0m
2.45
2.7
15.0m
1.3
1.55
16.0m
2.1
2.35
16.0m
1.05
1.3
17.0m
1.8
2.1
17.0m
0.85
1.05
18.0m
1.55
1.8
18.0m
0.65
0.9
19.0m
1.35
1.6
19.0m
0.5
0.7
20.0m
1.15
1.4
20.0m
21.0m
0.95
1.2
22.0m
1.05
24.0m
0.75
26.0m
0.5
a ( )
083
2083
a ( )
A= Boom length B= Working radius
a= Boom angle range (for the unladen condition)
415
0.55
083
2083
4283
TR-250M-7-00101
[BOOM]
Unit : ton
Outriggers minimum extended (3.1m) -Over sides-
A
B
9.5m
16.5m
23.5m
30.5m
2.5m
18.0
14.2
12.2
3.0m
18.0
14.2
12.2
3.5m
14.5
14.2
12.2
7.0
4.0m
11.6
11.25
12.2
7.0
4.5m
9.5
9.15
10.05
7.0
5.0m
7.9
7.65
8.45
7.0
5.5m
6.75
6.45
7.25
7.0
6.0m
5.75
5.5
6.25
6.5
6.5m
5.0
4.75
5.45
5.7
7.0m
4.25
4.1
4.8
5.0
8.0m
3.0
3.8
4.0
9.0m
2.2
3.0
3.2
10.0m
1.6
2.4
2.6
11.0m
1.1
1.9
2.1
12.0m
0.7
1.5
1.7
13.0m
1.1
1.4
14.0m
0.8
1.1
15.0m
0.8
16.0m
0.6
a ( )
083
2183
4083
5483
A= Boom length B= Working radius
a= Boom angle range (for the unladen condition)
416
TR-250M-7-00101
[JIB]
Unit : ton
Outriggers fully extended
30.5m Boom + 8.0m Jib
C
D
5
B (m)
83
4.3
76
9.5
72
70
25
B (m)
3.0
6.9
3.0
11.8
12.3
3.0
13.6
2.8
65
16.6
60
55
-360
-
30.5m Boom + 13.0m Jib
45
B (m)
2.1
8.9
2.1
13.5
14.4
2.1
15.6
2.1
2.35
18.5
19.6
2.0
22.2
1.45
50
24.6
45
26.9
40
35
E ()
(6.3m)
25
45
B (m)
B (m)
B (m)
1.6
5.7
2.0
10.0
1.2
13.0
0.8
1.6
11.7
2.0
15.5
1.2
18.1
0.8
15.9
1.6
14.6
1.75
18.4
1.1
20.5
0.8
17.0
1.6
16.1
1.65
19.7
1.05
21.8
0.8
1.8
19.7
1.5
19.6
1.4
22.8
0.95
24.5
0.78
21.2
1.55
22.1
1.35
22.8
1.2
25.8
0.9
27.0
0.75
23.7
1.35
24.4
1.2
25.9
1.05
28.5
0.85
29.4
0.74
1.05
26.0
1.0
26.5
0.95
28.6
0.85
31.0
0.75
31.5
0.7
0.75
28.1
0.7
28.3
0.7
31.1
0.6
33.1
0.55
33.3
0.55
29.0
0.55
29.9
0.5
33.3
0.4
35.0
0.4
30.8
0.38
31.6
0.35
a ()
34 83
44 83
39 83
44 83
Unit : ton
Outriggers middle extended
30.5m Boom + 8.0m Jib
C
D
E ()
5
B (m)
83
4.3
76
9.5
72
70
25
B (m)
3.0
6.9
3.0
11.8
12.3
3.0
13.6
2.8
65
16.6
60
19.5
55
-Over sides-
30.5m Boom + 13.0m Jib
45
B (m)
2.1
8.9
2.1
13.5
14.4
2.1
15.6
2.1
2.35
18.5
1.85
21.2
22.1
1.3
50
24.5
45
26.8
40
28.9
a ()
(5.9m)
25
45
B (m)
B (m)
B (m)
1.6
5.7
2.0
10.0
1.2
13.0
0.8
1.6
11.7
2.0
15.5
1.2
18.1
0.8
15.9
1.6
14.6
1.75
18.4
1.1
20.5
0.8
17.0
1.6
16.1
1.65
19.7
1.05
21.8
0.8
1.8
19.7
1.5
19.6
1.4
22.8
0.95
24.5
0.78
1.55
22.1
1.35
22.8
1.2
25.8
0.9
27.0
0.75
23.7
1.15
24.4
1.1
25.9
1.05
28.5
0.85
29.4
0.74
0.9
25.9
0.85
26.5
0.8
28.6
0.7
30.9
0.6
31.5
0.6
0.6
28.0
0.55
28.3
0.55
31.0
0.5
33.0
0.4
33.3
0.4
0.4
29.9
0.35
33.3
0.3
39 83
44 83
B= Working radius C= Jib length D= Jib offset
E= Boom angle M= Total rated loads
a= Boom angle range (for the unladen condition)
417
39 83
44 83
TR-250M-7-00101
[JIB]
Unit : ton
Outriggers middle extended
30.5m Boom + 8.0m Jib
C
D
E ()
5
B (m)
25
B (m)
(5.0m)
-Over sides-
30.5m Boom + 13.0m Jib
45
B (m)
25
45
B (m)
B (m)
B (m)
83
4.3
3.0
6.9
2.1
8.9
1.6
5.7
2.0
10.0
1.2
13.0
0.8
76
9.5
3.0
11.8
2.1
13.5
1.6
11.7
2.0
15.5
1.2
18.1
0.8
72
12.3
3.0
14.4
2.1
15.9
1.6
14.6
1.75
18.4
1.1
20.5
0.8
70
13.6
2.8
15.6
2.1
17.0
1.6
16.1
1.65
19.7
1.05
21.8
0.8
65
16.5
2.0
18.5
1.7
19.7
1.5
19.6
1.4
22.8
0.95
24.5
0.78
60
19.3
1.3
21.0
1.15
22.1
1.1
22.7
1.0
25.8
0.9
27.0
0.75
55
21.8
0.8
23.5
0.75
24.3
0.75
25.7
0.65
28.4
0.6
29.4
0.5
50
24.3
0.5
25.8
0.45
26.4
0.45
28.3
0.4
30.8
0.35
31.4
0.3
a ()
49 83
49 83
Unit : ton
Outriggers minimum extended
30.5m Boom + 8.0m Jib
C
D
E ()
5
B (m)
25
B (m)
(3.6m)
-Over sides-
30.5m Boom + 13.0m Jib
45
B (m)
25
45
B (m)
B (m)
B (m)
83
4.4
3.0
6.9
2.1
8.9
1.6
5.7
2.0
10.0
1.2
13.0
0.8
76
9.5
3.0
11.8
2.1
13.5
1.6
11.7
2.0
15.5
1.2
18.1
0.8
72
12.0
2.2
14.3
1.8
15.9
1.6
14.6
1.75
18.4
1.1
20.5
0.8
70
13.2
1.8
15.4
1.5
16.9
1.35
15.9
1.4
19.7
1.05
21.8
0.8
65
16.1
1.0
18.1
0.9
19.4
0.8
19.1
0.8
22.6
0.65
24.4
0.55
60
18.9
0.5
20.7
0.45
21.8
0.4
22.2
0.4
25.3
0.35
26.8
0.3
a ()
59 83
59 83
B= Working radius C= Jib length D= Jib offset
E= Boom angle M= Total rated loads
a= Boom angle range (for the unladen condition)
418
TR-250M-7-00101
PRECAUTIONS TO BE TAKEN WHEN THE OUTRIGGERS ARE EXTENDED:
1. The total rated loads shown are for the case where the crane is set horizontally on firm level ground. They include
the weights of the slings and hooks (main hook: 260kg, 12t hook: 170kg, auxiliary hook: 60kg).
The values above the bold lines are based on the crane strength while those below are based on the crane stability.
2. Since the working radii are based on the actual values including the deflection of the boom, operations should be
performed in accordance with the working radii.
3. Jib operations should be performed in accordance with the boom angle, irrespective of the boom length. The working
radii are reference values for the case where the jib is mounted on a 30.5m boom.
4. The total rated load for the single top shall be the value obtained by subtracting the weight of the hook mounted on
the boom from the total rated load of the boom and must not exceed 3.5t.
5. As a rule, free-fall operation should be performed only when lowering the hook alone. If a hoisted load must be
lowered by free-fall operation, the load must be kept below 1/5th of the total rated load and sudden braking
operations must be avoided.
6. The table below shows the standard number of part lines for each boom length. When using with other than this
number of part lines, the load per line should not exceed 3.17t for the main winch, and 3.5t for the auxiliary winch..
A
9.5m
16.5m
23.5m
30.5m
A= Boom length
H= No. of part-lines
J= Jib/Single top
7. The hoisting performance for the "Over sides" range will differ according to the extended width of the outriggers.
Operations should be performed in accordance with the performance corresponding to the extended width.
Also, although the hoisting performances for the "Over front" and "Over rear" ranges are equivalent to those of the
"outriggers fully extended" condition, the front and rear ranges (angle a) will differ according to the width to which the
outriggers are extended in the left and right directions.
Extended width
Angle a
Middle extended Middle extended Middle extended Minimum extended
(3.1m)
(5.9m)
(5.0m)
(3.6m)
35
25
419
15
TR-250M-7-00101
(2) Without outriggers
Unit : ton
Stationary
9.5m Boom
Creep (travelling at 1.6km/h or less)
16.5m Boom 23.5m Boom
9.5m Boom
16.5m Boom 23.5m Boom
(m)
3.0
14.0
9.0
9.0
7.3
3.5
14.0
7.6
9.0
7.3
6.5
4.0
12.5
6.3
9.0
5.85
4.5
10.9
5.2
9.0
10.5
7.0
7.5
5.1
4.5
10.5
6.2
7.5
5.1
5.5
3.2
6.5
4.5
9.5
5.3
7.5
4.9
5.5
3.2
4.75
6.5
4.5
8.7
4.4
7.5
3.95
5.5
3.2
5.0
9.55
4.3
8.2
4.0
6.5
4.3
8.0
3.6
7.0
3.3
5.5
3.2
5.5
8.3
3.6
7.4
3.3
6.1
3.7
6.9
3.0
6.2
2.7
5.15
3.1
6.0
7.2
3.0
6.6
2.8
5.65
3.2
5.9
2.5
5.5
2.3
4.8
2.7
6.5
6.25
2.5
5.9
2.35
5.25
2.75
5.1
2.1
4.9
1.9
4.45
2.3
7.0
5.2
2.0
5.25
1.95
4.85
2.4
4.3
1.7
4.35
1.6
4.15
2.0
8.0
4.1
1.4
4.1
1.8
3.4
1.1
3.5
1.5
9.0
3.25
0.95
3.5
1.4
2.7
0.7
2.95
1.1
10.0
2.6
0.6
3.0
1.05
2.15
2.45
0.8
11.0
2.1
2.55
0.75
1.7
2.05
0.6
12.0
1.7
2.2
1.35
1.7
13.0
1.35
1.85
1.1
1.45
14.0
1.0
1.55
0.8
1.2
15.0
1.3
1.0
16.0
1.05
0.85
17.0
0.85
0.7
18.0
0.65
0.55
19.0
0.5
a ()
077
42
26
56
77
77
77
B= Working radius K= Front G= 360
a= Boom angle range (for the unladen condition)
420
077
48
31
57
77
77
77
TR-250M-7-00101
PRECAUTIONS TO BE TAKEN WHEN THE OUTRIGGERS ARE NOT MOUNTED:
1. The total rated loads shown are for the case where the tire air pressure on firm level ground is as specified (900kPa
{9.00kgf/cm2}) and the suspension-lock cylinder is retracted as much as possible. They include the weights of the
slings and hooks (main hook: 260kg, 12t hook: 170kg, auxiliary hook: 60kg).
The values above the bold lines are based on the crane strength while those below are based on the crane stability.
The foundation, working conditions, etc. should be taken into consideration for actual work.
2. Since the working radii are based on the actual values including the deflection of the boom and the tires, operations
should be performed in accordance with the working radii.
3. The table below shows the standard number of part lines for each boom length. When using with other than this
number of part lines, the load per line should not exceed 3.17t for the main winch, and 3.5t for the auxiliary winch.
A
9.5m
16.5m
23.5m
Single top
A= Boom length
H= No. of part-lines
4. "Over front" crane operations should be performed only when the AML "over-front area indicator lamp" is lit. The
boom must be kept inside a 2area over front of the carrier when performing "Over front" crane operations without
the outriggers.
5. The total rated load for the single top shall be the value obtained by subtracting the weight of the hook mounted on
A p p r o x . 2
the boom from the total rated load of the boom and must not exceed 3.5t.
6. Free-fall operations should not be performed without outriggers.
Booms over 23.5m in length and jibs should not be used without outriggers.
7. The "Drive Mode Selection" switch should be set to "4-wheel / Lo" for creeping while hoisting a load and the shift
lever should be set to first.
8. When creeping while hoisting a load, the swing brake should be applied, the load should be kept as close to the
ground as possible but not touching the ground and the speed should be kept at 1.6km/h or less. In particular, any
abrupt steering, starting or braking must be avoided.
9. Crane operations should not be performed when creeping while hoisting a load.
421
TR-250M-7-00101
WORKING RADIUS - LIFTING HEIGHT
JI
JI
OM
BO
OM
BO
OM
BO
OM
BO
WORKING RADIUS (m)
NOTES:
1. The deflection of the boom is not incorporated in the figure above.
2. The figure above is for the case where the outriggers are fully extended (360).
422
LIFTING HEIGHT (m)
TR-250M-7-00101
Min.
DIMENSIONS (1/100)
Max.
423
TR-250M-7-00101
424
