LPCH
UNIVERSAL TENSION/COMPRESSION
High accuracy alloy steel construction
Ideal for materials testing, overhead and
low profile weighing.
Rugged with high overload capacity
Standard mountings-replaces LPC and
other market leaders
Recessed holes for flush mounting
Standard IP67 M12 sensor connector
Dimensions
Capacity
Order
1t
LPM1000T000XX1
35
105
65
33
22.5
8 Holes 7.2 PCD 88.5
5/8-18UNF
10.5 8.5
1.6
2.5t
LPM2500T000XX1
35
105
65
33
22.5
8 Holes 7.2 PCD 88.5
5/8-18UNF
10.5 8.5
1.6
5t
LPM5000T000XX1
35
105
65
33
22.5
8 Holes 7.2 PCD 88.5
5/8-18UNF
10.5 8.5
1.6
10t
LPM010TT000XX1 44.5 155
90
62
15
12 Holes 10.5 PCD 130.2 1-1/4-12UN
17
10
4.7
25t
LPM025TT000XX1 44.5 155
90
62
15
12 Holes 10.5 PCD 130.2 1-1/4-12UN
17
10
4.7
50t
LPM050TT000XX1 63.5 205
6.5
115
89
11.25 16 Holes 13.5 PCD 165.1 1-3/4-12UN
20
13
11.7
100t
LPM100TT000XX1
13
152
123 11.25 16 Holes 17.5 PCD 228.6
25
16
29.5
90
280
2-3/4-8UN
Weight
NOTE:dimensions are in mm/kg. LPCH supplied with straight mating connector without cable. Specifications with factory fitted base.
Due to PTs policy of continuous development, specifications and products offered are subject to change without notice.
Specifications
Signal Output at Capacity....................................20.01 mV/V
Linearity Error......................................................< 0.020% FSO
Non-Repeatability................................................< 0.020% FSO
Combined Error...................................................< 0.030% FSO
Hysteresis...........................................................< 0.020% FSO
Creep/(30 mins.)..................................................< 0.020% FSO
Zero Balance.......................................................< 2 % Capacity
Temperature Effect on Span(/10C).......................< 0.02% FSO
Temperature Effect on Zero(/10C)........................< 0.02% FSO
Operating Temperature Range.............................-35 ~ 65 C
Compensated Temperature Range......................-10 ~ 50 C
Storage Temperature Range................................-50 ~ 85 C
Excitation +ve......................................................Pin 1
Excitation -ve.......................................................Pin 2
Service Load.....................................100% Capacity
Safe Load.........................................150% Capacity
Safe Side Load.................................100% of axial load
Ultimate Load....................................300% Capacity
Input Resistance...............................750 5
Output Resistance.............................700 3
Insulation Resistance........................> 5000 M (@50 VDC)
Excitation Voltage(Rec).....................5~15 V AC/DC
Excitation Voltage(Max.)....................20 V AC/DC
Connector.........................................M12 Sensor type..
Material.............................................Alloy steel, nickel plated
Sealing..............................................IP67
Signal +ve.........................................Pin 4
Signal -ve..........................................Pin 3
R160810
http://www.ptglobal.com
LPCH ACCESSORIES
PT offers a range of accessories for the LPCH series load cells
Complete Mount
Load Button and Load Socket
Rod Ends and Tension Base
LOAD SOCKET
TOP PLATE (includes socket)
LOAD BUTTON
LOAD CELL
LOAD CELL
TENSION BASE
LOAD CELL
BOTTOM PLATE
ROD END
OR CLEVIS
Capacity
1t
5t
10t
25t
50t
100t
Mount
M-LPC-5
M-LPC-5
M-LPC-25
M-LPC-25
M-LPC-50
M-LPC-100
The Load Buttons and Load Sockets are nickel plated tool
steel, the mount plates are painted mild steel.
Capacity
1t~2.5t
5t
10t
25t
50t
100t
Button
A-LB0.625
A-LB0.625
A-LB1.250
A-LB1.250
A-LB1.750
A-LB2.750
Socket
A-LS50
A-LS50
A-LS75
A-LS75
A-LS100
A-LS150
The Load Buttons and Load Sockets are nickel plated tool
steel.
Capacity
1t~2.5t
5t
10t
25t
50t
100t
Rod End
A-RE0.625-2N
A-RE0.625-5N
A-RE1.250-10N
A-RE1.250-25N
A-RE1.750-N
A-RE2.750-N
Base
A-TB-5
A-TB-5
A-TB-25
A-TB-25
A-TB-50
A-TB-100
Note: A-RE1.750-N and A-RE2.750-N are clevises.
All items are high strength steel, Rod Ends and bolts are
zinc/nickel plated and the Tension Base is nickel plated.
The LPCH is fitted with an industry standard M12 sensor connector with IP67 sealing and is supplied with a straight
mating connector. The connector simplifies installation and maintenance and a cable type and length to suit the
requirements of the installation can be selected from the cable packs offered by PT. Six wire cables should be installed
by connecting the Sense+ with the Excitation+ to terminal 1 and the Sense- with the Excitation- to terminal 2 inside the
connector.
PT Cable Packs for the LPCH
Cable
Length
5.5mm, 6core
PE/PVC foil screened
6.5mm, 6core
PE/PU foil screened
7.5mm, 6core
PE/PU braid screened
10m
50m
100m
A-6C5.5-0010
A-6C5.5-0050
A-6C5.5-0100
A-6C6.5-0010
A-6C6.5-0050
A-6C6.5-0100
A-6C7.5-0010
A-6C7.5-0050
A-6C7.5-0100
Standard cable with moisture
resistant polyethelene wire
insulation and PVC outer sheath.
Improved durability and moisture
resistance with polyurethane (PU)
outer sheath.
Maximum durability and moisture
resistance with extra thick PU
sheath and braid screen.
http://www.ptglobal.com
