SLAB GATE VALVES

API 6A

Through Conduit
Slab Gate Valve
BGA type
Stem Packing Grease injection Port
Above Backseat

Stem

Body / Bonnet
Gasket

Gate

Seat

Seat Seal

SLAB GATE VALVES

BGA type
 TECHNICAL DESCRIPTION

Description:

ON/OFF service valve, through-conduit, forged Bodies, slab gate, floating seal.
Non Rising stem, bolted bonnet constructions, floating seats.
BGA valves features single spring-loaded, pressure energize, elastomeric seal
or non elastomeric lip seals; these seals assist in low pressure sealing and
protect against contaminants.
Valve can be supplied with BREDA hydraulic or pneumatic actuators type BHA /
BHS or BPA

Standard Construction :

According to API 6A
Metal to Metal seat design
Metal to Metal body bonnet design
Stem Backseat, to allow stem seals replacement under pressure
Fire safe design

Standard features:

Bi-directional design
Grease injection fitting on downstream side of the stem backseat for safety

Remarks:

On request, Breda Energia S.p.a. will supply various solutions not listed in this
catalogue as pup piece connections, reduction ports, etc., moreover years
experience in products for distribution oil & gas allow Breda Energia S.p.a. to
build products on special client specifications.
 Product Range
Pressure Range API 6A ( Psi )
Service
API 2000 API 3000 API 5000

Standard Range ( Inch ) 1.13/16 up to 7.1/16 2.1/16 up to 9 2.1/16 up to 9

Material requirements
Service
Trim
Conditions Body and Stem Gate Seat
Bonnet Materials Materials Materials Materials
API 6A
Classification
General
AA Alloy Steel Alloy Steel Alloy Steel / Hard Facing Alloy Steel / Hard Facing
Service
General
BB Alloy Steel AISI 410 AISI 410 / Hard Facing AISI 410 / Hard Facing
Service
General Stainless Steel
CC AISI 410 AISI 410 / Hard Facing AISI 410 / Hard Facing
Service 13% Cr.
Sour
DD Alloy Steel Alloy Steel Alloy Steel / Hard Facing Alloy Steel / Hard Facing
Service
Sour
EE Alloy Steel AISI 410 AISI 410 / Hard Facing AISI 410 / Hard Facing
Service
Sour Stainless Steel
FF AISI 410 AISI 410 / Hard Facing AISI 410 / Hard Facing
Service 13% Cr.
Sour
HH Alloy Steel clad * Inconel 718 Inconel 718 / Hard Facing Inconel 718 / Hard Facing
Service
* Clad with Inconel 625

Temperature ratings
Operating Range

Temperature F C
Classification from min. up to Max. from min. up to Max.

min. Max. min. Max.

K -75 180 -60 82

L -50 180 -46 82

P -20 180 -29 82

R Room temperature Room temperature

S 0 150 -18 66

T 0 180 -18 82

U 0 250 -18 121

V 35 250 2 121
 Part List & Spare Parts

Recommended
Part N Description
Spare Parts
01 Body n.a.
02 Bonnet n.a.
03 Gate n.a.
04 Stem n.a.
05 Seat n.a.
06 Stem Packing Yes
07 Paking Nut n.a.
08 Body/Bonnet Gasket Yes
09 Seat O-Ring Yes
10 Body stud nuts n.a.
11 Body studs n.a.
12 Gate guide n.a.
13 Grease Fitting Port n.a.
14 Thrust Bearing n.a.
15 Upper Bonnet n.a.
16 Handwheel n.a.
 Overall Dimensions

W.P. API 2000 ( Psi )

Nominal
A Weight
Size
D B C E F
( inch ) RJ Thrd. ( Kg. )

2.1/16 52.5 295 229 145 541 438 250 59

2.9/16 65.5 333 - 166 561 458 300 79

3.1/8 81.5 359 280 196 575 472 350 88

4.1/16 103.5 435 - 244 633 530 400 156

5.1/8 130 562 - 279 676 573 500 327

7.1/16x6.3/8 162 562 - 334 810 703 500 530

7.1/16 181 664 - 373 948 842 500 650

W.P. API 3000 ( Psi )

Nominal
A Weight
Size
D B C E F
( inch ) RJ Thrd. ( Kg. )

2.1/16 52.5 371 229 137 541 438 350 82

2.9/16 65.5 423 - 162 561 458 400 108

3.1/8 81.5 435 280 196 575 472 400 107

4.1/16 103.5 511 - 244 633 530 500 204

5.1/8 130 613 - 279 676 573 500 327

7.1/16x6.3/8 162 613 - 334 911 805 500 610

7.1/16 181 664 - 373 948 842 500 690

9 229 841 - 473 1044 938 500 1150

W.P. API 5000 ( Psi )

Nominal
A Weight
Size
D B C E F
( inch ) RJ Thrd. ( Kg. )

2.1/16 52.5 371 229 137 541 438 350 82

2.9/16 65.5 423 - 162 561 458 400 108

3.1/8 81.5 473 - 203 591 483 400 146

4.1/16 103.5 549 - 250 643 540 500 245

5.1/8 130 727 - 289 861 755 500 588

7.1/16x6.3/8 162 737 - 344 926 820 500 771

7.1/16 181 813 - 380 955 849 500 925

9 229 1041 - 483 120 1097 500 1950

Note :
- Dimensions in mm.
- Dimensions and weights are subject to change without notice
 CHOKES

API 6A

Cage Control Choke

Type BCC
 Hand-wheel

Stem

Bonnet

Body

Sleeve

Retaining sleeve

Cage

Seat

Cage Control Choke

Type BCC
 TECHNICAL DESCRIPTION

Description:

The BREDA ENERGIA Cage Control Choke type BCC is designed to provide
precise flow control throughout its entire operating range. This choke has a
cage and an external sleeve trim and is suitable for single or multiphase liquid
and gas service.
Typical applications include Christmas trees, manifold, water injection and gas
lift. The standard flow characteristic is equal percentage, but upon request can
be supplied also the linear characteristic. These valves can be easily converted
from manual to actuated valves using an adapter flange and BREDA ENERGIA
stepping actuator.

Design Code :

API 6A / ISO 10423

Standard features:

The Cage with external sleeve design configuration directs flow through various
sized ports opposite one another, forcing the flow to impinge upon itself within
the nozzle, thus dissipating the fluid energy onto itself. With this design the
turbulence and jetting are dissipated before flow enters the outlet, thus
eliminating the typical problem of wear in the choke outlet. The Cage is the
hardest component of the valve and typically is made from various grades of
tungsten carbide. However, for less severe applications, other materials are
available.

Option features:

Multistage Trim
Metal to Metal Bonnet Seal
Stem Locking Assembly

Remarks:

On request, Breda Energia will issue various technical solutions not listed in
this catalogue. Years of experience in products for distribution of oil & gas
allow Breda Energia to supply products on special client specifications.
 - API 6A -

Product Range

Service Pressure Range API 6A ( Psi )

API 2000 -3000 - 5000 API 10000 API 15000

Standard Range ( Inch )
1.13/16 up to 7.1/16 1.13/16 up to 7.1/16 1.13/16 up to 5.1/8

CAGE Size 1/2 3/4 1 1.1/2 2 2.1/2 3 4 6

Cv 5 10 18 33 60 100 160 293 620

Material requirements

Service Minimum material

Trim
Conditions requirements

Body, bonnet end and outlet Pressure-controlling parts, stems

API 6A Classification
connections and mandrel hangers
General Service AA Carbon or low-alloy steel Carbon or low-alloy steel
General Service BB Carbon or low-alloy steel Stainless Steel
General Service CC Stainless Steel Stainless Steel
a b b
Sour Service DD Carbon or low-alloy steel Carbon or low-alloy steel
a b b
Sour Service EE Carbon or low-alloy steel Stainless Steel
a b b
Sour Service FF Stainless Steel Stainless Steel
a b b
Sour Service HH CRAs CRAs
a b
As defined be NACE MR 0175; In compliance with NACE MR 0175.

Temperature ratings
Operating Range

Temperature F C
Classification from min. up to Max. from min. up to Max.

min. Max. min. Max.

K -75 180 -60 82

L -50 180 -46 82

P -20 180 -29 82

R Room temperature Room temperature

S 0 150 -18 66

T 0 180 -18 82
U 0 250 -18 121

V 35 250 2 121
 Part List & Spare Parts

05

06
04
07
03 08
09
02 10
11

01

12
13
14

15

Recommended Recommended
Part N Description Part N Description
Spare Parts Spare Parts
01 Body n.a. 09 Body/bonnet gasket Yes
02 Bonnet n.a. 10 Retaining Sleeve Yes
03 Body Stud Nuts n.a. 11 Sleeve gasket Yes
04 Body Studs n.a. 12 Sleeve Yes
05 Hand-wheel n.a. 13 Seat Yes
06 Thrust Bearing n.a. 14 Seat gaskets Yes
07 Stem n.a. 15 Cage Yes
08 Stem gasket Yes
 CHOKES

API 6A

Needle Chokes
Hand-wheel

Stem

Bonnet

Body

Needle

Seat

Adjustable Needle Chokes

Type BCN
 TECHNICAL DESCRIPTION

Description:

The BREDA ENERGIA Adjustable Choke type BCN is designed for high
performance in critical applications such as gas well high pressure drops,
abrasive flow and corrosive conditions. The choke has an externally controlled
variable-area orifice coupled with an orifice-area indicating mechanism.
Typical application include wellheads and well testing, manifolds, heaters,
critical service.

Design Code:

API 6A / ISO 10423

Remarks:

On request, Breda Energia will issue various technical solutions not listed in
this catalogue. Years of experience in products for distribution of oil & gas
allow Breda Energia to supply products on special client specifications.
 - API 6A -

Product Range

Service Pressure Range API 6A ( Psi )

API 2000 - 3000 - 5000 API 10000 API 15000

1.13/16 up to 7.1/16 1.13/16 up to 7.1/16 1.13/16 up to 5.1/8

Standard Range ( Inch )
ORIFICE Size

1, 2, 3, 4, 6

Material requirements

Service Minimum material

Trim
Conditions requirements

Body, bonnet end and outlet Pressure-controlling parts, stems

API 6A Classification
connections and mandrel hangers
General
AA Carbon or low-alloy steel Carbon or low-alloy steel
Service
General
BB Carbon or low-alloy steel Stainless Steel
Service
General
CC Stainless Steel Stainless Steel
Service
Sour b b
a DD Carbon or low-alloy steel Carbon or low-alloy steel
Service
Sour b b
Service a EE Carbon or low-alloy steel Stainless Steel

Sour b b
a FF Stainless Steel Stainless Steel
Service
Sour b b
a HH CRAs CRAs
Service
a b
As defined be NACE MR 0175; In compliance with NACE MR 0175.

Temperature ratings
Operating Range

Temperature F C
Classification from min. up to Max. from min. up to Max.

min. Max. min. Max.

K -75 180 -60 82

L -50 180 -46 82

P -20 180 -29 82

R Room temperature Room temperature

S 0 150 -18 66
T 0 180 -18 82

U 0 250 -18 121

V 35 250 2 121
 Part List & Spare Parts

06

05 07

04
02
08

01

09
03
10

Recommended Recommended
Part N Description Part N Description
Spare Parts Spare Parts
01 Body n.a. 06 Hand-wheel n.a.
02 Bonnet n.a. 07 Stem+Needle n.a.
03 Seat Yes 08 Body Bonnet gasket Yes
04 Body Stud Nuts n.a. 09 Stem gasket Yes
05 Body Studs n.a. 10 Seat gasket Yes
 CHOKES

API 6A

Positive Chokes
 Plug

Bonnet

Body

Bean

Positive Choke
Type BCP
 TECHNICAL DESCRIPTION

Description:

The BREDA ENERGIA Positive Choke type BCP is designed for maximum
performance under critical condition. Positive chokes accommodate replaceable
parts having fixed orifice dimensions (flow beans). Typical application includes
wellheads and well testing, manifolds process facilities and other demanding
services.

Design Code:

API 6A / ISO 10423.

Option features:

Conversion to needle valve (adjustable choke).

Remarks:

On request, Breda Energia will issue various technical solutions not listed in
this catalogue. Years of experience in products for distribution of oil & gas
allow Breda Energia to supply products on special client specifications.
 - API 6A -

Product Range

Service Pressure Range API 6A ( Psi )

API 2000 - 3000 - 5000 API 10000 API 15000

1.13/16 up to 7.1/16 1.13/16 up to 7.1/16 1.13/16 up to 5.1/8

Standard Range ( Inch )
BEAN Size

1/8, 3/8, 5/8, 7/8 ,1/2, , 1, 1.1/4, 1.1/2, 2, 3

Material requirements
Service Minimum material
Trim
Conditions requirements
Body, bonnet end and outlet Pressure-controlling parts, stems
API 6A Classification
connections and mandrel hangers
General
AA Carbon or low-alloy steel Carbon or low-alloy steel
Service
General
BB Carbon or low-alloy steel Stainless Steel
Service
General
CC Stainless Steel Stainless Steel
Service
Sour b b
a DD Carbon or low-alloy steel Carbon or low-alloy steel
Service
Sour b b
Service a EE Carbon or low-alloy steel Stainless Steel

Sour b b
a FF Stainless Steel Stainless Steel
Service
Sour b b
a HH CRAs CRAs
Service
a b
As defined be NACE MR 0175; In compliance with NACE MR 0175.

Temperature ratings
Operating Range

Temperature F C
Classification from min. up to Max. from min. up to Max.

min. Max. min. Max.

K -75 180 -60 82

L -50 180 -46 82

P -20 180 -29 82

R Room temperature Room temperature

S 0 150 -18 66

T 0 180 -18 82

U 0 250 -18 121

V 35 250 2 121
 Part List & Spare Parts

05

06
04
02
07
08

01

03

09

Recommended
Part N Description
Spare Parts
01 Body n.a.
02 Bonnet n.a.
03 Bean Yes
04 Body Studs Nuts n.a.
05 Body Studs n.a.
06 Plug n.a.
Body Plug Metal to metal
07 Yes
gasket
08 Body plug o-ring Yes
09 Body bean gasket Yes
SLAB GATE VALVES
API 6A

Through Conduit
Slab Gate Valve
SDS type
Stem Packing

Stem
Grease injection Port
above Backseat

Body / Bonnet
Gasket

Gate

Seat

Seat Seal

SLAB GATE VALVES

SDS type
 TECHNICAL DESCRIPTION

Description:

ON/OFF service valve, through-conduit, forged Bodies, slab gate, floating

seats. Non Rising stem, bolted bonnet constructions, self relieving seats.
SDS valves features dual spring-loaded, pressure energize, non elastomeric lip
seals; these seals assist in low pressure sealing and protect against
contaminants.
Valve can be supplied with BREDA hydraulic or pneumatic actuators type BHA
or BPA

Standard Construction :

According to API 6A
Metal to Metal seat design
Metal to Metal body bonnet design
Stem Back Seat, to allow stem seals replacement under pressure
Fire safe design

Standard features:

Bi-directional design
Grease injection fitting on downstream side of the stem backseat for safety

Remarks:

On request, Breda Energia S.p.a. will supply various solutions not listed in this
catalogue as pup piece connections, reduction ports, etc., moreover years
experience in products for distribution oil & gas allow Breda Energia S.p.a. to
build products on special client specifications.
 Product Range
Pressure Range API 6A ( Psi )
Service
API 10000 API 15000 API 20000

Standard Range ( Inch ) 1.13/16 up to 7.1/16 1.13/16 up to 5.1/8 1.13/16 up to 3.1/16

Material requirements
Service
Trim
Conditions Body and Stem Gate Seat
Bonnet Materials Materials Materials Materials
API 6A
Classification
General
AA Alloy Steel Alloy Steel Alloy Steel / Hard Facing Alloy Steel / Hard Facing
Service
General
BB Alloy Steel AISI 410 AISI 410 / Hard Facing AISI 410 / Hard Facing
Service
General Stainless Steel
CC AISI 410 AISI 410 / Hard Facing AISI 410 / Hard Facing
Service 13% Cr.
Sour
DD Alloy Steel Alloy Steel Alloy Steel / Hard Facing Alloy Steel / Hard Facing
Service
Sour
EE Alloy Steel AISI 410 AISI 410 / Hard Facing AISI 410 / Hard Facing
Service
Sour Stainless Steel
FF AISI 410 AISI 410 / Hard Facing AISI 410 / Hard Facing
Service 13% Cr.
Sour
HH Alloy Steel clad * Inconel 718 Inconel 718 / Hard Facing Inconel 718 / Hard Facing
Service
* Clad with Inconel 625

Temperature ratings
Operating Range

Temperature F C
Classification from min. up to Max. from min. up to Max.

min. Max. min. Max.

K -75 180 -60 82

L -50 180 -46 82

P -20 180 -29 82

R Room temperature Room temperature

S 0 150 -18 66

T 0 180 -18 82

U 0 250 -18 121

V 35 250 2 121
 Part List & Spare Parts

Recommended
Part N Desciption
Spare Parts
01 Body n.a.
02 Bonnet n.a.
03 Gate n.a.
04 Stem n.a.
05 Seat n.a.
06 Stem Packing Yes
07 Packing Nut n.a.
08 Body/Bonnet Gasket Yes
09 Seat Gasket Yes
10 Body stud nuts n.a.
11 Body studs n.a.
12 Gate guide n.a.
13 Grease Fitting Port n.a.
14 Thrust Bearing n.a.
15 Upper Bonnet n.a.
16 Handwheel n.a.
 Overall Dimensions

W.P. API 10000 ( Psi )

Weight
Nominal Size
D A B C E F
( inch ) (kg.)

1.13/16 46 464 135 508 354 400 92

2.1/16 52.5 521 155 526 372 500 113

2.9/16 65 565 170 574 419 500 168

3.1/16 78 619 220 634 481 500 353

4.1/16 103.5 670 271 680 527 600 350

5.1/8 130 737 321 943 837 500 950

7.1/16x6.3/8 162 889 407 1167 1057 500 1200

7.1/16 179.5 889 463 1167 1057 800 1500

9 229 1041 513 1347 1172 800 2600

W.P. API 15000 ( Psi )

Nominal Size Weight

D A B C E F
( inch ) (kg.)
1.13/16 46 457 135 508 354 400 102
2.1/16 52.5 483 160 556 402 450 160

2.9/16 65 533 188 618 465 500 237

3.1/16 78 599 226 666 513 550 352

4.1/16 103.5 737 284 1001 895 500 895

5.1/8 130.5 889 335 1020 915 450 1460

Note :
- Dimensions in mm.
- Dimensions and weights are subject to change without notice
TRUNNION MOUNTED
BALL VALVES

API 6D
&
API 6A

Side_Entry Ball Valve

SE type
 Stem

Stem Seals

Body / Closure
Gasket

Ball

Seat

Seat Seal

Side_Entry Ball Valve

SE type
 TECHNICAL DESCRIPTION

Description:

ON/OFF service valve, Trunnion mounted-supported,

Side-Entry ( Split-body) two or three pieces bolted constructions,
floating seats energized by springs, Full or Reduced bore,
Bi-Directional.

Standard Construction :

According to API 6A & API 6D

Double Block & Bleed design

Standard features:

Primary Soft seats & Secondary Metal seats design

Self relieving seats
Emergency Sealant Grease injection on stem
Emergency Sealant Grease injection on seats ( on 6 & larger )
Fire safe design according to API 6FA API 607 BS 6755 Part.2
Double Body seals & Triple stem seals
Antistatic device
Anti-blowout stem

Option features:

Double piston effect design

Metal to Metal design
Overlay on wet parts design
Stem extension for buried installation design

Remarks:

On request, Breda Energia S.p.a. will supply various solutions not listed in this
catalogue as pup piece connections, reduction ports, etc., moreover years
experience in products for distribution oil & gas allow Breda Energia S.p.a. to
build products on special client specifications.
 - API 6D -

Product Range

Service Pressure Range API 6D

ANSI 150 ANSI 300 ANSI 600 ANSI 900 ANSI 1500 ANSI 2500
Standard Range ( Inch ) (19 bar) (50 bar) (99 bar) (149 bar) (248 bar) (414 bar)

2 up to 60 2 up to 48 2 up to 30 2 up to 20

Material requirements

Trim
Service Body and Material selection
Materials
Conditions Closure Materials general list
Stem-Ball-Seat

General
& Carbon Steel Carbon Steel
Sour Service - Carbon Steel
- Low temperature Carbon Steel
General - Low Alloy Steel
& Carbon Steel Stainless Steel - Martensitic Stainless Steel
Sour Service - Austenitic Stainless Steel
- Duplex Stainless Steel
General - Nickel Alloys
& Stainless Steel Stainless Steel
Sour Service

Materials selection will be performed in accordance with Client data sheet / Specification

Temperature ratings
Operating Range

Temperature C
Classification from min. up to Max.

min. Max.

Standard -29 121

Low temperature -46 121

Cryogenic -196 121

High Temperature -29 350

 - API 6A -

Product Range
Service Pressure Range API 6A ( Psi )
API 2000 API 3000 API 5000

1.13/16 up to 7.1/16 2.1/16 up to 9 2.1/16 up to 9

Standard Range ( Inch ) Pressure Range API 6A ( Psi )
API 10000 API 15000 API 20000
1.13/16 up to 7.1/16 1.13/16 up to 5.1/8 1.13/16 up to 3.1/16

Material requirements
Service
Trim
Conditions Body and Stem Ball Seat
Closure Materials Materials Materials Materials
API 6A
Classification
General
AA Alloy Steel Alloy Steel Alloy Steel Alloy Steel
Service
General
BB Alloy Steel AISI 410 AISI 410 AISI 410
Service
General Stainless Steel
CC AISI 410 AISI 410 AISI 410
Service 13% Cr.
Sour
DD Alloy Steel Alloy Steel Alloy Steel Alloy Steel
Service
Sour
EE Alloy Steel AISI 410 AISI 410 AISI 410
Service
Sour Stainless Steel
FF AISI 410 AISI 410 AISI 410
Service 13% Cr.
Sour
HH Alloy Steel clad * Inconel 718 Inconel 718 Inconel 718
Service
* Clad with Inconel 625

Temperature ratings
Operating Range

Temperature F C
Classification from min. up to Max. from min. up to Max.

min. Max. min. Max.

K -75 180 -60 82

L -50 180 -46 82

P -20 180 -29 82

R Room temperature Room temperature

S 0 150 -18 66

T 0 180 -18 82
U 0 250 -18 121

V 35 250 2 121
 Part List & Spare Parts

Recommended Recommended
Part N Description Part N Description
Spare Parts Spare Parts
01 Body n.a. 16 Body Fire Safe Gasket Yes
02 Closure n.a. 17 Stem O-Ring Yes
03 Ball n.a. 18 Glande Plate O-Ring Yes
04 Stem n.a. 19 Body O-Ring Yes
05 Seat Ring n.a. 20 Seat O-Ring Yes
06 Seat Seal Yes 21 Body Studs n.a.
07 Gland Plate n.a. 22 Body Stud Nuts n.a.
08 Adapter Plate n.a. 23 Capscrew n.a.
09 Bearing n.a. 24 Stem Grease Fitting n.a.
10 Upper thrust washer n.a. 25 Stem Key n.a.
11 Lower thrust washer n.a. 26 Vent (Bleeder Fitting) n.a.
12 Seat Spring n.a. 27 Drain Plug n.a.
13 Stem Packing Fire Safe Yes 28 Grease Sealing Yes
14 Stem Packing Ring n.a. 29 Bearing Retainer n.a.
15 Gland Plate Fire Safe Gasket Yes 30 Pins n.a.
 - API 6D -

Overall Dimensions

ASME 150
Nominal
A Weight
Size
D B C
( inch ) RF RTJ WE ( Kg. )

2 51 178 190 216 98 160 28

3 76 203 216 283 125 190 60

4 102 229 241 305 165 225 95

6 153 394 406 458 248 230 180

8 203 458 470 521 295 275 353

10 254 534 546 559 330 295 500

12 305 610 622 635 370 340 705

14 337 686 698.5 762 420 375 864

16 387 762 775 839 460 415 1023

18 438 864 876 914 500 460 1445

20 489 915 927 991 540 490 1920

22 540 991 - 1093 590 535 2350

24 591 1067 1079 1143 640 575 2805

26 635 1143 - 1245 660 620 3523

28 686 1245 - 1347 745 660 4046

30 736 1295 - 1397 760 695 4820

32 781 1372 - 1524 780 735 5489

34 832 1473 - 1626 820 785 6705

36 876 1524 - 1728 890 820 7615

40 978 1753 - 1956 990 905 10275

42 1022 1855 - 2083 1150 970 12114

48 1168 2134 - 2134 1180 1125 18365

56 1361 2300 - 2300 1230 1225 32300

60 1464 2400 - 2400 1350 1310 35900

Note :
- Dimensions in mm.
- Dimensions and weights are subject to change without
notice
 - API 6D -

Overall Dimensions

ASME 300
Nominal
A Weight
Size
D B C
( inch ) RF RTJ WE ( Kg. )

2 51 216 232 216 98 160 31

3 76 283 298 283 125 190 68

4 102 305 321 305 165 225 110

6 153 404 419 458 248 230 221

8 203 502 517 521 295 275 375

10 254 569 584 559 330 295 534

12 305 648 664 635 370 342 762

14 337 762 779 762 420 373 898

16 387 839 854 839 460 414 1296

18 438 914 930 914 500 475 1705

20 489 991 1010 991 540 535 2080

22 540 1093 1115 1093 590 568 2610

24 591 1143 1165 1143 640 615 3080

26 635 1245 1270 1245 660 622 3875

28 686 1347 1372 1347 745 658 4569

30 736 1397 1422 1397 760 710 5580

32 782 1524 1552 1524 780 736 6239

34 832 1626 1654 1626 820 765 7365

36 876 1728 1756 1728 890 800 8420

40 978 1956 - 1956 990 896 11000

42 1022 2083 - 2083 1150 969 12955

48 1168 2170 - 2170 1180 1085 19000

56 1361 2350 - 2350 1230 1230 35000

Note :
- Dimensions in mm.
- Dimensions and weights are subject to change without
notice
 - API 6D -

Overall Dimensions

ASME 600

Nominal
A Weight
Size
D B C
( inch ) RF RTJ WE ( Kg. )

2 51 292 295 292 98 160 36

3 76 356 359 356 125 190 75

4 102 432 435 432 165 225 135

6 153 559 562 559 250 230 240

8 203 660 664 660 290 267 430

10 254 787 791 787 330 305 660

12 305 838 841 838 372 348 905

14 337 889 892 889 423 373 1358

16 387 991 994 991 463 413 1623

18 438 1092 1095 1092 500 460 2085

20 489 1194 1200 1194 540 500 2580

22 540 1296 1305 1296 590 549 3300

24 591 1397 1406 1397 640 600 4800

26 635 1448 1461 1448 660 622 5100

28 686 1550 1562 1550 745 673 6057

30 736 1651 1664 1651 760 753 6695

32 781 1778 1794 1778 782 760 7570

34 832 1930 1946 1930 820 784 8450

36 876 2083 2098 2083 890 821 10020

40 978 1900 1900 1900 990 953 13600

42 1022 2100 2100 2100 1058 1011 18805

48 1168 2240 2240 2240 1178 1128 24185

56 1361 2580 2580 2280 1310 1300 36300

Note :
- Dimensions in mm.
- Dimensions and weights are subject to change without
notice
 - API 6D -

Overall Dimensions

ASME 900

Nominal
A Weight
Size
D B C
( inch ) RF RTJ WE ( Kg. )

2 51 368 371 368 108 - 51

3 76 381 384 381 135 - 90

4 102 457 460 457 160 245 161

6 153 610 613 610 265 235 389

8 203 737 740 737 299.5 272 567

10 254 839 842 839 344 316 849

12 305 965 968 965 388 361 1170

14 324 1029 1038 1029 430 390 1620

16 375 1131 1140 1131 472.5 428 2020

18 425 1219 1232 1219 520 490 2815

20 473 1321 1334 1321 565 535 3480

24 572 1549 1568 1549 655 630 5552

26 619 1651 1674 1651 584 667 7169

28 667 1753 1775 1753 705 709

30 667 1880 1902 1880 770 755

32 762 1850 1872 1850 820 811 T.B.A.

34 810 2159 2188 2159 860 847

36 857 2286 2315 2286 880 883

42 1003 2600 2600 2600 1100 1070 32000

Note :
- Dimensions in mm.
- Dimensions and weights are subject to change without
notice
- T.B.A. : to be advise
 - API 6D -

Overall Dimensions

ASME 1500

Nominal
A Weight
Size
D B C
( inch ) RF RTJ WE ( Kg. )

2 51 368 371 368 108 180 59

3 76 470 473 470 135 210 106

4 102 546 549 546 180 245 195

6 146 705 711 705 298 268.5 550

8 194 832 841 832 347 318 925

10 241 991 1000 991 412 381 1640

12 289 1130 1146 1130 451.5 423.5 2470

14 317.5 1257 1276 1257 505 482.5 3170

16 362 1384 1407 1384 565 543.5 4480

18 407 1537 1559 1537 630 600 6720

20 457 1664 1686 1664 700 680 9760

24 534 2043 2071 2043 815 800 15270

28 620 2210 2210 915 900
T.B.A. T.B.A.
30 667 2350 2350 1000 1050

Note :
- Dimensions in mm.
- Dimensions and weights are subject to change without
notice
- T.B.A. : to be advise
 - API 6D -

Overall Dimensions

ASME 2500

Nominal Weight
A
Size
D B C
( inch ) RF RTJ WE ( Kg. )

2 44.5 451 454 451 118 200 90

3 63 578 584 578 152 180 220

4 89 673 683 673 178 207 320

6 134 914 927 914 242 263 690

8 181 1022 1038 1022 388 365 1435

10 225 1270 1292 1270 473 461 2220

12 267 1422 1445 1422 580 595 3350

Note :
- Dimensions in mm.
- Dimensions and weights are subject to change without
notice