CONTINENTAL MOTORS AIRCRAFT ENGINE CATEGORY 5
SERVICE INFORMATION LETTER SIL16-2
Contains Useful Information Pertaining To Your Aircraft Engine
SUBJECT: M-0, Standard Practice Maintenance Manual Release
PURPOSE: Announce availability and applicability of the
M-0, Standard Practice Maintenance Manual
COMPLIANCE: During all scheduled and unscheduled engine maintenance activity
MODELS
AFFECTED: Continental Motors (CM) horizontally opposed, spark-ignited aircraft engines
operating on aviation gasoline (AvGas) listed below
I. GENERAL INFORMATION
Continental Motors is proud to announce the release of the M-0, Standard Practice Maintenance
Manual. The Standard Practice Maintenance Manual applies to all horizontally opposed, spark-
ignited aircraft engines operating on AvGas fuel.
The content of M-0 is supplemental to the existing Instructions for Continued Airworthiness
(ICA) for Continental Motors engines listed in Section II, Applicability. M-0 contains
scheduled maintenance intervals and thorough instructions for the owner to complete the
maintenance and many standard repairs within the document. See Section III, Incorporated
Service Documents for a list of service documents incorporated in, and superseded by M-0.
M-0, Standard Practice Maintenance Manual is available for immediate download from the
Continental Motors web site at www.continentalmotors.aero. Printed copies are available for
purchase from the CM Powerstore (www.cmipowerstore.aero).
II. APPLICABILITY
Continental Motors Part No. M-0, is supplemental, as defined by Title 14 CFR33.4, to the
maintenance and overhaul manuals listed below. Together, this manual, those listed below, active
service documents and FAA Airworthiness Directives comprise the Instructions for Continued
Airworthiness for applicable engines.
Layered instructions, found in both M-0 and the principal ICAs listed below, will be revised to
reference the instructions in M-0. Until revisions are complete, where a conflict of instructions or
specifications is discovered between the principal ICA and M-0, the contents of M-0 shall be
required.
Part No. Title Applicability
M-2 Maintenance and Overhaul Manual O-200-D, X
M-6 Maintenance and Overhaul Manual IO-240
M-7 Maintenance and Overhaul Manual IO-360
M-11 Maintenance Manual IO-520 Permold
M-16 Maintenance and Overhaul Manual IO-550 Permold
ISSUED REVISED PAGE NO DOC NO REVISION
2016/04/15 ---
P.O. Box 90 Mobile, AL 251-436-8299
1 of 4 SIL16-2 ---
2016 Continental Motors, Inc.
M-18 Maintenance and Overhaul Manual TSIO-550 Permold
M-22 Maintenance and Overhaul Manual IOF-240
M-24 Maintenance Manual IOF-550-A, B, C, G, N, P & R
M-26 Maintenance and Overhaul Manual TSIOF-550
OH-15 Overhaul Manual TSIOL-550-C
OH-24 Overhaul Manual IOF-550
OMI-15 Operation, Maintenance and TSIOL-550-C
Installation Manual
X30008 Overhaul Manual A-65, A-75
X30010 Overhaul Manual C-75, C,85, C90, O-200-A, B
X30013 Overhaul Manual C-125, C-145, O-300
X30016 Overhaul Manual E-165, E-185, E-225
X30019 Overhaul Manual GO-300
X30027 Overhaul Manual IO-346
X30033 Overhaul Manual TSIO-470
X30039 Overhaul Manual IO-520
X30045 Overhaul Manual GTSIO-520
X30144 Overhaul Manual TIARA 6-285 and 6-320
X30531 Alternator Service Instructions Continental alternators
X30571 Maintenance and Operators Manual TSIO-360-LB
X30574 Overhaul Manual TSIO-520-B, BB, BE, D, DB,
DB, E, EB, J, JB, K, KB, L,
LB, N, NB, U, UB, VB,
WB Permold series
X30575 Overhaul Manual LTSIO-520-AE
TSIO-520-C, CE, G, H, M, P,
R, T, AE, AF Sandcast series
X30586 Overhaul Manual O-470-A, B, E, G, J, K, L, M
R, S, U
X30592 Starter Service Instructions Energizer starters
X30596 Overhaul Manual LTSIO-360-EB, KB & RB,
TSIO-360-A, AB, B, C, CB,
D, DB, E, EB, F, FB, G, GB,
H, HB, J, JB, K & KB, LB,
MB, SB
X30596S1 Overhaul Manual LTSIO-360-RB,
TSIO-360-RB
ISSUED REVISED PAGE NO DOC NO REVISION
2016/04/15 ---
P.O. Box 90 Mobile, AL 251-436-8299
2 of 4 SIL16-2 ---
X30600 Overhaul Manual TSIOL-550-A
X30601 Maintenance and Operators Manual TSIOL-550-A
X30605 Maintenance Manual IO-550-D, E, F & L
X30607 Overhaul Manual IO-550-D, E, F & L
X30645 Maintenance Manual LTSIO-360-RB
TSIO-360-RB
X30672 Maintenance Manual TSIO-360-MB, SB
III. INCORPORATED SERVICE DOCUMENTS
NOTE: Mandatory Service Bulletins and Critical Service Bulletin (marked with an
asterisk (*) in the left column) were incorporated in, but not superseded by, M-0.
Document
Number Service Document Title
M67-12 Overboost of Turbocharged Engines
M72-17R1 Maximum Weight Difference Between Connecting Rods and Pistons in the
Same Engine
M76-4 Propeller Shaft or Crankshaft Oil Seal Replacement
M76-8 Intake Valve Change
M77-3 Use of Alternate Fuels in Engines Originally Certified for 80/87, 91/96
and 100/130 Grade Fuels
M87-15 Alternator Ground Strap
M88-9 Lightning Strikes
M88-10 Contaminated Fuels
M89-7R1 Engine Operation after Cylinder Replacement and/or Major Overhaul
M89-9 Excessive Crankcase Pressure
M90-17 Crankcase Inspection Criteria
SIL93-11B Service Document Format
SIL93-15 General Practices for Installation of Lock Wire, Tab Washers, and
Cotter Pins
* MSB94-8D Magneto to Engine Timing
SB95-2 Inspection and Maintenance of Engine Control Cables and Linkage
SB95-3B Alternator/Generator Drive Coupling
SIL95-5 Hose and Tubing Installation
SB96-7D Torque Limits
* MSB96-10B Crankshaft Ultrasonic Inspection
ISSUED REVISED PAGE NO DOC NO REVISION
2016/04/15 ---
P.O. Box 90 Mobile, AL 251-436-8299
3 of 4 SIL16-2 ---
SB96-11B Propeller Strikes and Hydraulic Lock
SB96-12 Cylinder Continued Airworthiness
SID97-2B Design, Operation Maintenance and Warranty of Cylinders
SID97-3G Continuous Flow Fuel Injection Systems Adjustment Specifications
and Instructions
SID97-4F Cylinder Bore and Piston Fit Specifications
SB97-6B Mandatory Replacement Parts
SIL98-9E Time Between Overhaul Periods
SIL99-1 Engine Preservation for Active and Stored Aircraft
SIL99-2C Sealants, Lubricants and Adhesives Authorized by CMI
SB00-3A Crankshaft, Counterweight and Connecting Rod Repair Information
SIL00-9A Engine Data Plates
SIL00-11B Release of new Cylinder Induction Port Drain Connector
SIL03-1 Cold Weather Operation - Engine Preheating
SIL03-2C Currently Active Approved Spark Plug Application
SB03-3 Differential Pressure Test and Borescope Inspection
SIL04-12A Authorized Engine Adjustments, Component Replacement and
Repositioning
SB05-2 Overspeed Limitations
* CSB08-3C Throttle & Mixture Control Levers
SB08-13 Induction System Hose and Clamp Installation
SB11-3 Alternator and Drive Coupling Installation
SIL13-2A Alternator Instructions for Continued Airworthiness
SB14-8 Exhaust Flange to Cylinder Installation
ISSUED REVISED PAGE NO DOC NO REVISION
2016/04/15 ---
P.O. Box 90 Mobile, AL 251-436-8299
4 of 4 SIL16-2 ---
