USB / RCA Endoscope Camera, PROCAM
(EF-140HCU / EF-140HCUA) USER MANUAL
Easier & better performance
* Design and specifications are subject to change without notice.
* Manual & Software Update will be continuous.
- Contents -
1. Safety Caution & Specification
2. General Specification
3. Introduction of Software Installation Process
4. Introduction of USB Driver Installation Process
5. Button & Function Description
6. Treble Shooting
7. Warranty Regulation
USB OUTPUT USB & RCA OUTPUT
(model: EF140HCU) (model: EF140HCUA)
Free Diagnosis Software
PROVIX, 4/5F Jipyong B/D, 151-37 Wonmi-dong, Wonmi-gu Bucheon-si, KOREA
www.provix.co.kr / sales@provix.co.kr / (TEL) +82 32 661 8135 / (FAX) +82 32 661 8138
MADE IN KOREA
1. Safety Caution & Specification
Safety Caution
*. In order to obtain optimum performance and ensure patient safety, please
read this instruction manual thoroughly.
* Do not use CAMERA if you notice any signs of damage or malfunction and
contact PROVIX or its official distributor in your country immediately.
* Do not use in the presence of flammable anesthetics.
* Do not use any other attachments which dont follow the international
standard other than the attachments designed by PROVIX exclusively for
CAMERA.
* Always be careful when using this device to patient.
* Do not disinfect CAMERA by using steam or autocalve. (the best way is using
EO Gas)
* Water Ingress Protection, IPX7protected against the effects of temporary
immersion in water
* This product complies with current required standards for electromagnetic
interference and should not present any complications to other equipment or
devices. Avoid using this device in close proximity of other equipment.
* Keep out of reach of children. Only to be used by trained personnel.
* Operating Temperature: -10 ~ 50
* Operating Humidity: 0% ~ 80%
* Storage Temperature: -20 ~ 60
* Storage Humidity: 0% ~ 90%
2. General Specification
USB / RCA Endoscope Camera, PROCAM
* 1/3 SONY CCD
* Pixels: 500,000
* Resolution : 720X480(NTSC) / 720X576 (PAL) / 640X480 (USB)
* USB 2.0 Connection Available (Cable Length: 3m)
* Including Free Diagnosis Software (Windows Only)
* Dimension of Camera: 40mm X 40mm X 84mm
* Weight of Camera Head: 120g
* Function: White Balance Button, Capture Button, Recording Function (By Software)
* Output (Option 1 / MODLE EF140HCU): USB 2.0
* Output (Option 2 / MODEL EF140HCUA): USB 2.0 & RCA (CVBS / Composite)
Coupler Lens
* C-Mount Coupler Lens
* Focal Length: F=22mm or F=25mm Available.
* Dust Protect Glass
USB Portable LED Lamp, EF-LED
* 3 Watt LED
* Wolf Connector Style
* USB 2.0 Connection Available (Cable Length: 3m)
80W LED LIGHT SOURCE, LL250 SINGLE
* 80 Watt LED Light Source
* Brightness Control Available
* Stroz / Wolf Connector Available
* Fiber Optic Cable (Wolf / Storz) Available
3. Introduction of Software Installation Process
Introduction of Software Installation Process
Before installing Software, Please check the Basic System Requirement
as below
* Windows XP, Windows Vista, Windows 7
* USB 2.0 port
* Minimum Specification of Computer
- CPU: Intel Pentium Dual Core B950 / 2.1Ghz, Cash: 2MB
- MEMORY: More than 2GB
- Graphic Card: G-Force GT, more than 2 GB
- O/S: Windows XP or later O/S
Please close all windows & save all data.
* Caution *
Because this installation software is designed for medical purpose
specially, users or doctors have to follow the directions in this
manual completely due to the Video Codec Installation.
If you dont follow the direction and just click next, next. The
software will not operate properly.
Introduction of Software Installation Process
1. Please insert the CD provided by PROVIX 2. Double Click CD-Driver, or open the files in CD.
3. Double Click Setup file 4. Click Next Button
5. After designate the folder, click Next button 6. Click Install Button
Introduction of Software Installation Process
7. Click Continue Anyway Button 8. Click Finish Button
9. Wait for few seconds until Install window shown up 10. Click Next Button
11. Click Finish Button 12. Just click Finish (Do not restart the computer)
Introduction of Software Installation Process
13. Wait for few seconds until Install window shown up 14. Choose the proper language. Then click OK
15. Click Next Button 16. Select location. Then Click Next Button
17. Click I accept... option, then Click Next Button 18. Click Next Button
Introduction of Software Installation Process
19. Click Next Button 20. Click Next Button
Very
Very
important
important
21. Choose Do not limit option. Then Click Next 22. Choose Do not limit option. Then Click Next
23. Click Next Button 24. Click Install Button
Introduction of Software Installation Process
25. Click Finish Button 26. Click Next Button
27. Click Next Button 28. Click Install Button
29. Click Finish Button 30. Click Yes I want to restart. Then, Click Finish
Button
Introduction of Software Installation Process
31. After restarting, Please plug in USB Cable 32. Found New Hardware will be shown up
33. few seconds later, ready to use will be shown up 34. Double-click the UBCAMPRO PROVIX icon
35. Diagnosis System will be operated as above 36. Please check USB2860 Device is shown up
Options & Functions In Image View Menu
If you click Image View button, youll have this kind of Viewing Screen.
There are 3 red rectangles with numbers.
If you take a look at the next page, you can have detail descriptions about
these functions
Options & Functions In Image View Menu
1 * View Icon: If you click this icon, you can have the live image.
* Pen Icon: After pressing Freeze Button, if you click this icon
and draw lines on the captured image, you can draw lines on the
captured image
* Eraser Icon: If you click this icon, you can erase what you drew.
* Pen Color Icon: You can choose the pen color with this
* Print Icon: Print the current captured image
* Image Control Icon: If you click this icon, you can control the
2 Brightness, Contrast, Hue, Saturation, Sharpness, Gamma,
Backlight Comp.
* Save Icon: If you click this icon, you can save the current image(s)
and designate the folder & file name.
* Full Screen Icon: If you click this icon, the screen will be exchanged to the
full screen mode.
3
* Full Mode: If you click this icon, a single screen will be appeared.
* Half Mode: If you click this icon, dual screens will be appeared.
* Quarter Mode: If you click this icon, quarter screens will be
appeared.
Options & Functions In Image Management Menu
1
3
4
5
If you double click the saved
image, you can delete it
If you click Image Management button, youll have this kind of Viewing Screen.
There are 5 red rectangles with numbers.
If you take a look at the next page, you can have detail descriptions about
these functions
Options & Functions In Image Management Menu
1 * Capture Tap: In this tap, you can capture the image(s) or
record the video(s). Captured images will be saved automatically
& shown to the below screen (#5).
* Image Tap: In this tap, you can edit image(s).
* MovieTap: In this tap, you can open & play the movie(s).
2
* Image tools: Automatically saved pictures can be edited by
these tools in Image tap.
3
* Recording Icon: You can record & save the video through this
icon.
* Stop Recording Icon: If you click this icon, recording video will
be stopped & saved.
* Save Icon: If you click this icon, you can save the current image(s)
and designate the folder & file name.
* Full Screen Icon: If you click this icon, the screen will be exchanged to the
full screen mode.
* Image Control Icon: If you click this icon, you can control the
Brightness, Contrast, Hue, Saturation, Sharpness, Gamma, Backlight
Comp.
4
* The folder for auto-saving images: If you capture image(s) in Image
Management Menu, the captured images will be saved this folder
automatically.
5
* Pre-view Tap: This tap shows the image(s) that you captured. If you
click, you can edit the image. Or if you double-click the image, you can
delete the image.
Options & Functions In Image Management Menu
- Patient Information Management Function-
1. Please click the Folder Option Button
2. You can create the folder(s) with the patient name(s) or any other and you
can save the data to each folder
3. When you re-load the data, just click Folder Option Button again, then you
can find the folder(s), and you can re-load the previous data.
4. If you click Convert Name, you can save the current image as other name.
5. Button & Function Description
Button Description & Function
White Balance Button:
Activating White Balance
Capture Button:
Activating Capture
5. Button & Function Description
Button Description & Function
Power Cable: Power CABLE PART
Adaptor has to be
connected (Only when
the RCA Port is
connected)
Video Cable: Monitor
Input or BNC adaptor has
to be connected
USB Cable: USB port has
to be connected
Also, if power cable is not
connected, you can use
this port as power too
If both USB & RCA Video Cable are connected, it works without D/C Power Adaptor,
Because USB Also provides necessary power. It is okay to connect all ports. (Up to
user)
5. Button & Function Description
Button Description & Function
1st WAY: If the 80W LED Light Source is required,
* 80W LED Light Source will give enough brightness to all of application such as
Laryngoscope, Nasopharyngoscope, Sinuscope, etc..
PROCAM, EF-140HCUA
* USB & RCA Output
* Waterproof
3m USB & RCA Cable
Connect TO
LL-250 LED LIGHT SOURCE
Connect TO USB 2.0
PORT
Connect TO
CVBS(RCA/Composite)
Port of LCD Monitor
LL-250SINGLE
(80W LED LIGHT Source)
Computer for data storage
Monitor for showing to the patients or management for
doctors reference
5. Button & Function Description
Button Description & Function
2nd WAY: If the only 3W LED Light Source is required,
* For this application, only you can use 3 LED Light Source. Hence, the brightness is not
enough. Only for Otoscope & Sinuscope Applications.
PROCAM, EF-140HCUA
* USB & RCA Output
* Waterproof
LED LAMP 3m USB & RCA Cable
(3W USB LED LAMP)
Connect TO
USB 2.0 PORT Connect TO USB 2.0 PORT
Connect TO
CVBS(RCA/Composite)
Port of LCD Monitor
Monitor for showing to the Computer for data storage or
patients management for doctors reference
6. Trouble Shooting
If the USB Camera is not working properly, please follow the steps as below.
1. Please connect USB Output of PROCAM to other USB Port (the USB Port of the
computer could be out of order)
2. Please check whether the user follows the installation process correctly or not. (Read the
manual from 5th to 10th page and follow the steps of the installation exactly.)
3. Please un-install the Software, USB Driver, Video Codec (Check below to uninstall)
1. Please click Start and go to the control
panel of the windows
2. Please open the program
uninstallation tool.
3. Please uninstall above programs and re-install
(Refer to this manual from 5th to 10th page)
- PROVIX
- USB2.0 PC Camera (SN9C201&202)
- USB TV Device Driver
- ffdshow [rev 1879] [2008-02-26]
- FLV SPLITTER
7. Warranty Regulation
Warranty Card
According to the warranty rule, PROVIX provides customers with the
warranty service as following
Warranty service is valid until 12 months (1 year) after purchasing
P.S.: In order to get warranty service in other region expect Korea,
please contact the official distributor or branch office of PROVIX for
better & faster service.
Manufacture PROVIX
Origin Republic of Korea
Product USB Endoscope Camera
Article Number EF-140HCU
Warranty Period 12 months (1 year)
Serial Number
Address of Manufacture PROVIX, 4/5F Jipyong B/D, 151-37 Wonmi-dong,
Wonmi-gu ,Bucheon-si, KOREA
Website of Manufacture www.provix.co.kr
Contact Information (TEL) +82 32 661 8135
(FAX) +82 32 661 8138
Person in Charge Mr. Julian Kim
Email Address julian@provix.co.kr
PROVIX, 4/5F Jipyong B/D, 151-37 Wonmi-dong, Wonmi-gu, Bucheon-si, KOREA
www.provix.co.kr / sales@provix.co.kr / (TEL) +82 32 661 8135 / (FAX) +82 32 661 8138
MADE IN KOREA
