POWER FRESH
Pine Disinfectant
Product Description
POWER FRESH is an effective disinfectant against a wide range of germs and
microorganisms. Formulated with a pine fragrance widely used in medical facilities, it will
leave the area with a clean, hygienic scent after use.
Areas of Use
POWER FRESH is ideal for cleaning and disinfecting hospital wards, clinics, washrooms,
urinals, water closets, garbage areas, lockers and all areas where a hygienic environment is
desired. Also is suitable for masking foul odours.
Special Features
Free caustic or no toxic solvents and is completely safe to use.
No rinsing required.
Chlorinated phenol derived coefficiency allows germicidal properties to be
maintained over prolonged storage.
Clean pine fragrance that lasts long after use
Directions for Use
Dilution rates and application methods vary for different situations. Generally recommended
dilution rates with water are:
- Mopping or scrubbing floors and wiping of hard surfaces ~ dilute 1:80
- Cleaning and disinfecting walls, sanitary areas and heavily soiled floors~dilute 1:50
- Spraying from tank sprayer as odour mask ~ 1:5
Precaution
As with most chemical products, avoid ingestion and eye contact. If product enters eyes,
flushing with water should be sufficient. If ingested, dilute by drinking water and seek
medical help.
102003 KLENCO (SINGAPORE) PTE LTD
18 Gul Crescent, Singapore 629527 Tel: (65) 6862 3388 Fax: (65) 6861 7575 info@klenco-asia.com www.klenco-asia.com
Company Registration No: 197100402R
Singapore China Malaysia Thailand ASEAN South Asia
SAFETY DATA SHEET
SECTION 1 - IDENTIFICATION
Product Identifier: POWER FRESH Supplier: Klenco (Singapore) Pte Ltd.
Address: 18 Gul Crescent, Singapore 629527
Department: Chemical
Other means of identification: Pine Disinfectant Person in Charge: Chemist
Date of SDS: 30 June 2011 Phone: (65) 6862 3388
Recommended use and restriction on use: POWER FRESH is ideal for Fax: (65) 6861 7575
cleaning and disinfecting hospital wards, clinics, washrooms, urinals, Email: www.klenco-asia.com
water closets, garbage areas, lockers and all areas where a hygienic Emergency contact: (65) 6862 3388
environment is desired. Also is suitable for masking foul odours.
SECTION 2 - COMPOSITION/ INFORMATION ON INGREDIENTS
Chemical Identification Component & Composition Chemical Formula CAS NO. EC NO.
Isopropyl alcohol < 5.0 % C3H8O 67-63-0 200-661-7
Sodium hydroxide < 1.0 % NaOH 1310-73-2 215-185-5
Pine oil < 7.0 % Mixture 8002-09-3 232-688-5
Gum rosin < 2.0 % C19H29COOH 8050-09-7 232-475-7
Oleic acid < 3.0 % C18H34O2 112-80-1 204-007-1
Water > 90.0 % H2O 7732-18-5 231-791-2
SECTION 3 - HAZARDS IDENTIFICATION
GHS classification: Acute toxicity: Category 4;
Skin irritation: Category 2
GHS label elements: Pictogram: Signal Words: warning
Hazard statements: H302: Harmful if swallowed
H315: Causes skin irritation
Precaution statements: P102: Keep out of reach of children.
P262: Do not get on skin.
P280: Wear protective gloves and clothing.
SECTION 4 FIRST AID MEASURES
Inhalation: Move to area of fresh air. If breathing has stopped, artificial respiration should be started. Oxygen may be
administered if available. Call a physician. Never give anything by mouth to an unconscious person.
Skin contact: Wash with large amounts of soap and water. If irritation persists, consult a physician.
Eye contact: Flush with cool water for at least 15 minutes. Then consult a physician immediately.
Ingestion: Do not induce vomiting. Dilute by drinking water. Call a physician immediately.
Notes to Physicians: Treatment should be directed at preventing absorption, administering to symptoms (if they
occur), and providing supportive therapy.
SECTION 5 FIRE-FIGHTING MEASURES
Suitable fire-extinguishing media: Water, dry chemical, carbon dioxide and foam.
Specific hazards arising from the chemical: Burning can produce carbon dioxide, carbon monoxide and
traces of nitrogen oxides.
Special protective actions for fire fighters: Fire fighters may be exposed to the products of combustion should wear a
self-contained breathing apparatus with full protective equipment.
SECTION 6 - ACCIDENTIAL RELEASE MEASURE
Personal precautions, protective equipment, and emergency measure: Use proper protective equipment (chemical
protection suit, gloves, goggles, mask, etc).
Environmental precautions: Chemical substance should not be released into the environment (water, soil).
Methods and materials for containment and cleaning up: Stop spill at source. Contain material, as necessary, with
dike or barrier. Mop, shovel or absorb with inert material and place in sound containers. Rinse remaining residue with excess
water. Cover spills with absorbent clay, sawdust or inert material and place in closed chemical waste containers.
Dispose of according to applicable local, state and federal regulations.
SECTION 7 - HANDLING AND STORAGE
Precaution for safe handling: Wash thoroughly after handling, especially before eating and drinking. Wash contaminated
goggles, face-shield, and gloves. Launder contaminated clothing before re-use.
Conditions for safe storage, including any incompatibilities: Store in cool, dry, well-ventilated area at room temperature.
Do not re-use empty container for food, clothing or products for human or animal consumption or where skin contact can occur.
SECTION 8 - EXPOSURE CONTROLS/ PERSONAL PROTECTION
Control parameters/ Occupational exposure limits: ACGIH - TLV: Provide suitable personal protective equipment and/or
ventilation to maintain exposure below TLV levels.
Appropriate engineering control measures: Normally ventilation is not require
Personal Protection: Normally not required. Safety glasses / goggles can be worn if splashing is anticipated.
102003 Page 1 of 2
SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES
Appearance & Odour: Brown liquid with pine odour
Solubility in water: Complete.
Boiling Point: 100 0 C
Specific Gravity: 1.000 +/- 0.005 g/cm3
PH: 12.2 +/- 0.2
Flash Point (T.C.C.): None to boiling Flammable Limits - Upper: Not applicable Lower: Not applicable
Vapour Pressure: Not determined
Vapour Density: Not determined
SECTION 10 - STABILITY AND REACTIVITY
Reactivity/ In compatible materials: Oxidizers.
Chemical stability: Stable under normal temperature and pressure.
Possibility of hazardous reaction: Will not occur.
Condition to avoid: Not applicable
SECTION 11 TOXICOLOGICAL INFORMATION
Acute toxicity: Oral: Low toxicity
Skin or eye irritation: This product contains small percentage sodium hydroxide that may cause mild irritation to some
individuals.
SECTION 12 ECOLOGICAL INFORMATION
Persistence and degradability: Product degrades readily by action of microorganism.
Bioaccumulative potential: It is soluble in water and does not bio-accumulate.
SECTION 13 DISPOSAL CONSIDERATIONS
Disposal method: Dispose off in an approved waste facility according to local regulations.
It is recommended that an alternative be selected according to the following order of preference, based upon
environmental acceptability: (1) Re-cycle or rework, if feasible (2) Incinerate at an authorized facility (3) Treat at an acceptable
waste treatment facility.
SECTION 14 TRANSPORT INFORMATION
This material is non-regulated and no special requirement is necessary.
SECTION 15 REGULATORY INFORMATION
International regulation:
Classification: This product has not been allocated any classification.
Risk phrases: R22 Harmful if swallowed
R38 Irritating to skin
Safety phrases: S02 Keep out of reach of children
S24 Avoid contact with skin
S36/ 37 Wear suitable protective clothing and gloves
SECTION 16 OTHER INFORMATION
Hazard Rating: HMIS (Hazardous Materials Information System)
HEALTH: 1
FLAMMABILITY: 0
REACTIVITY: 0
0=Minimal, 1=Slight, 2=Moderate, 3=Serious, 4=Extreme
NOTICE: SDS is correct at date of publication. It is not necessarily fully adequate for every circumstance, nor to
be confused with or followed in violation of applicable laws or insurance requirements. Health hazards and
effects of over-exposure apply only to negligent handling or misuse of product in its concentrated form (as
supplied); and not routine exposure to diluted product under normal use. No warranty, express or implied, of
merchantability, fitness or accuracy of data is made; as such the vendor assumes no responsibility for injury or
damages resulting from use of this product.
102003 Page 2 of 2
