HOW TO GROW ABACA
Introduction
The climatic condition in Region VIII which covers Leyte and Samar is best suited for
abaca production. Recently, Region VIII is the highest abaca producing area of the country
since some of the abaca plantation in Bicol and Mindanao are infested by pests and
diseases.
Inorder that Region VIII will not be affected by the disease which seriously affect the
production in Bicol and Mindanao and to continually enhance or increase the quality and
yield of fiber, it is necessary to follow the proper way of growing abaca as suggested in this
guide.
Selection of Plantation Site
plant abaca in nearly plain and sloppy areas
choose the area which are not waterlogged during rainy season or located in cool
and shady area favorable for newly planted abaca during the dry season.
Planting Materials
Abaca has two types of planting materials:
Corm - oftentimes used as planting materials since it is less bulky and will easily
germinate. Can be harvested 18 months after planting.
Sucker - usually used as replant for deceased seedpieces. Can be harvested 12
months after planting.
Time of Planting
Abaca usually planted at the start of the rainy season
Planting can be done anytime if there will be no distinct wet and dry season
Land Preparation
Land clearing and preparation of the area will depend on the type of soil, slope and
terrain, and kind of weeds growing in the area.
Lowland area
For newly opened areas, cut the unwanted trees after the rainy season, but leave
some trees that serve as shade for the new plants.
Plow and harrow the area to reduce weed population.
For cultivated areas, underbrush the existing weeds. Plow and harrow the area to
reduce weed population.
Upland area
In forested area, cut unwanted trees but leave some that serves as shade for new
plants.
Construct a contour line perpendicular to the slope using an "A frame".
Use wood or bamboo sticks along the contour line to prevent soil erosion and
conserved the inherent fertility of the soil.
Leguminous tree species can also be used like madre de cacao or ipil-ipil along the
contour. If it will grow taller than the abaca plant, pruned the trees and let debris
decompose to add organic matter to the soil.
Plow the spaces along the contour to condition the soil and destroy growth of weeds.
Planting Method and Distance
Plant abaca at a distance of not less than two meters.
Follow the "square method" in short-distanced planting (2m x 2m) for cultivar
planted that are not droopy. If not, plant different intercrops under abaca.
Use the "square method" in long-distanced planting (2.5m x 2.5m or 3m x 3m)
specially if you wish to intercrop under abaca or if the cultivar planted have droopy
leaves.
After the desired planting distance has been established, marked each hill with a
bamboo stick.
Hole Preparation
Bore a hole in every hill prior to planting.
Separate top soil from subsurface soil.
The size of hole will depend on the size of prepared planting material.
Planting
Put topsoil at the bottom of the prepared hole.
Place sucker or corm of abaca at the hole. Compress remaining soil around the
planted material.
Make a mound of soil around the plant to minimize impounding of water from
precipitation or irrigation.
Try to visit the newly planted abaca two or three weeks after planting to ensure
germination of the seedpieces. Replant the missing hills and those suckers that has
no new leaves developed.
Fertilization
The amount of commercial fertilizer needed will depend on the inherent fertility of the
soil. Thus, soil sampling is very much needed to assess the soil fertility.
Fertilization guide in a one hectare abaca plantation:
Amount of Fertilizer Time of Fertilization
Type of Fertilizer
Needed (sacks) (MAP1)
Urea 2 3 MAP
Urea 2 6 MAP
Complete 2 9 MAP
Complete 2 12 MAP
In old abaca plantation, apply fertilizer once before and after rainy season at 8 bags per
hectare (4 Urea and 4 complete).
Remove weeds around abaca plant before fertilizing. Use drill method in fertilizing abaca
and apply fertilizer at a distance of 1½ feet from the base.
Shade
Provide shade to newly germinated abaca plants until it is fully established.
Leave few trees in the area planted to abaca.
In deforested areas, plant ipil-ipil, madre de cacao or any other trees that can
provide enough shade to the germinating abaca seedpieces.
Trees can serve as windbreaks to abaca plants against the devastation of typhoons
or storms.
Trees can add fertility to the soil and hold excess moisture.
Weeding
Control weeds around the abaca plants three months after planting. Make this a
practice from establishment stage until abaca plants can be harvested.
Underbrush properly the weeds in the field which could serve as host among disease
causing insect and pest vectors.
Remove some dried leaves and "bacbac" from abaca plant every three months.
Potential Intercrops
Intercropping under abaca can provide additional income. The plants that can be
utilized under abaca are as follows:
For newly opened abaca plantation:
mungbean
bushbean
peanut
okra
millet
sweet potato
For old abaca plantation
pineapple
ginger
taro
Advantages in Planting Intercrops Under Abaca
Additional income can be derived from intercrop aside from the income earned from
abaca.
If legumes were planted like mungbean, bushbean or peanut under abaca, fertility
status of the soil will be alleviated.
Maintening the number of suckers
Remove the undesirable suckers of abaca inorder to maintain fertility of the soil and to
enhance the growth of the remaining plants. This will be done simultaneously during the
weeding period.
Source:
National Abaca Research Center
Visayas State College of Agriculture
Baybay, Leyte
ABACA NURSERY ESTABLISHMENT: A Field Manual
Introduction
Abaca is a well known crop in the Philippines especially in Region 8 for its fiber's good
quality and strength. To step-up the industry and to maintain and conserve this crop which
is indigenous in the Philippines, farmers are being motivated and encouraged by the
different government and non-government agencies to plant abaca. Hence, there exists a
growing demand for abaca planting materials. In fact, the National Abaca Research Center
(NARC), could no longer cope with the requests for planting materials from farmers who
wish to rehabilitate or establish an abaca plantation. It is then a challenge to our abaca
cultivators, extension and development workers, financing institutions and local government
units to solve the rising demand of planting materials.
Selecting the Site
The site for abaca nursery should be:
located in flat or rolling areas but not in steep places
accessible and not too far from the road
well-drained and does not get flooded during heavy rains. This is to avoid rotting of
the seedpieces and/or planting materials
near a river or creek which can be a good source of water during drought
Preparing the Field
Prepare the fields depending on the vegetation of the area.
Manually clear and plow the area until it is properly cleaned.
Planting Material
Corm is a good planting material since it is less bulky and will easily germinate.
Do not mix different cultivars.
Choose healthy and disease free planting materials to avoid disease infestation of the
area.
Spacing
Plant corms at 1m x 1m planting distance.
Mark the desired area to be planted with a bamboo stick.
Plant the seedpieces following the square method.
Planting
Bore a hole that could approximately accommodate the size of the seedpiece or
planting material.
Plant the seedpiece in the hole with the side or facing upward to minimize rotting
and to enhance germination.
Replant the missing hills with good and viable seedpieces.
Fertilizing
Get enough soil sample and send it to the nearest "Soil Testing Laboratory". The
amount of fertilizer needed will depend on the inherent fertility of the soil.
For distant farms, if stunted growth of the plant is noted, use complete fertilizer at
the amount of two to three bags per hectare.
Fertilize the abaca plant 2-4 months after planting.
Fertilize plants using the ring method a radius of 1½ inches from the base of the
plant.
Maintenance
Weed the area regularly until the plants mature and are ready for harvesting as
seedpieces and/or planting materials.
Plant intercrops such as peanut, mungbean or sweetpotato at the early stage of
growth to reduce weed population.
Keep the nursery area free from any pests and diseases.
Rapid Sucker Multiplication Technique
Remove or puncture the pseudostem of the mother plant 4-6 months after planting in
order to regenerate eyebuds or suckers. This technique, known as "decapitation", was
based on the premise that the nutrients absorbed for the growth of the motherplant will be
utilized for regeneration of eyebuds and suckers.
Harvesting of abaca seedpieces
Harvest abaca seedpieces 12-14 months after planting.
Uproot all suckers but leave 2-3 healthy suckers for the next cropping period.
Chop the corms into seedpieces having 1 or 2 eyebuds in each seedpiece. They
should be free from any pests and diseases to reduce disease infestation to the
abaca growing areas.
Place the seedpieces in bags and store the seedpieces in cool and shaded areas to
reduce damage and dehydration.
Label each bag with the cultivars name and the number of seedpieces
accommodated.
Source:
National Abaca Research Center
Visayas State College of Agriculture
Baybay, Leyte
