Scribd
Upload
685 views2 pages

Durometro - Time - th130 PDF

The TH130 hardness tester has an integrated impact device with no cables needed. It has a wide measuring range for most metals and can directly display values in common hardness scales. The tester allows indentation at any angle with simple operation and low cost. An optional printer is available. Standard features include integrated impact device, measurement of various hardness scales, memory for 99 readings, and rechargeable batteries. Optional accessories include support rings for non-standard geometries.

Uploaded by

joseperezoso
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
685 views2 pages

Durometro - Time - th130 PDF

The TH130 hardness tester has an integrated impact device with no cables needed. It has a wide measuring range for most metals and can directly display values in common hardness scales. The tester allows indentation at any angle with simple operation and low cost. An optional printer is available. Standard features include integrated impact device, measurement of various hardness scales, memory for 99 readings, and rechargeable batteries. Optional accessories include support rings for non-standard geometries.

Uploaded by

joseperezoso
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Hardness Tester TH130

●Impact Device D integrated: no cables!


●Wide measuring range in HLD and direct display of converted
hardness values in HB, HRB, HRC,HRA, HV, HS
●For most metals (see table below)
●Test at any angle
●Simple handling and low test expenditure
●Optional printer TA220S available

Measuring range
Material HLD HRB HRC HB HV HS

Steel & 300~900 38.4~99.8 20~68.4 81~654 81.1~955 32.5~99.5

cast steel

CWT.ST 300~840 20.4~67.1 80~898

Stainless 300~800 46.5~101.7 19.6~62.4 85~655 85~802

steel

GC. Iron 360~650 93~334

NC.Iron 400~660 131~387

C.Alum 200~570 23.8~34.6 26.8~164

Brass 200~550 13.5~95.3 40~173

Bronze 300~700 60~290

Copper 200~690 45~315

Technical specifications
Standard Impact Device D integrated Standard delivery
Hardness scales HLD, HB, HRC, HRA, HV, HS ●Main Unit integrated with
Measuring range / materials See table above
impact
Accuracy ±6HLD(760 ±30HLD)
Memory 99 average readings ●Test block with HLD value
Output RS232 to printer ●Charger
Min. Surface Roughness of Work 1.6µ ( Ra) ●Cleaning brush
piece
●TIME certificate
Max. Work piece Hardness 900HLD
Min. radius of Work piece Rmin = 50mm ●Instruction manual
(convex/concave) (with support ring Rmin= 10mm) ● Warranty card
Min. Work piece weight 2~5kg on stable support
●Carrying case
0.05~2kg with compact coupling
Min. Work piece thickness 5mm
coupled Optional accessories
Min. Thickness of hardened 0.8mm ●Support rings
layers
●Printer TA220S with cable
Indentation depth Impact Devices data (See page 8)
Continuous working time 8h
Power Rechargeable Li-Polymer batteries
Operating temperature 0~40℃
Overall dimensions 155×24×55mm
Weight 180 g
Optional Support Rings

Support Rings

No. Type Sketch of non-conventional Remarks


supporting ring
1 Z10-15 For testing cylindrical outside
surface R10～R15
2 Z14.5-30 For testing cylindrical outside
surface R14.5～R30
3 Z25-50 For testing cylindrical outside
surface R25～R50
4 HZ11-13 For testing cylindrical inside
surface R11～R13
5 HZ12.5-17 For testing cylindrical inside
surface R12.5～R17
6 HZ16.5-30 For testing cylindrical inside
surface R16.5～R30
7 K10-15 For testing spherical outside
surface SR10～SR15
8 K14.5-30 For testing spherical outside
surface SR14.5～SR30
9 HK11-13 For testing spherical inside
surface SR11～SR13
10 HK12.5-17 For testing spherical inside
surface SR12.5～SR17
11 HK16.5-30 For testing spherical inside
surface SR16.5～SR30
12 UN For testing cylindrical outside
surface, radius adjustable R10～∞

You might also like