Automotive Worldwide

Equivalent standards tables

Extract from the product catalogue -European edition

Note: Information contained in this catalogue is subject to change.

Please contact our sales team whenever you place an order to ensure that your requirements are fully met.
Please contact us if you have a specific requirement that is not included in the range of products and services covered by this catalogue.
We are also reachable by the e-mail address automotive.request@arcelormittal.com.
 
 We are also reachable by the e-mail address automotive.request@arcelormittal.com.
 

Equivalent standards tables

The indicative tables below summarize the European standards corresponding to the ArcelorMittal product range. ArcelorMittal grades generally offer
tighter mechanical property guarantees than the standards.
 
The VDA (German Association of the Automotive Industry) 239 standard for recommended material requirements has been developed within a VDA
Working Group to reduce the complexity of numerous national, regional and company owned steel sheet specifications. For more information, please
visit the VDA website.

Dual Phase steels

  Euronorms VDA 239-100

FF 280 DP HCT500X (+Z) CR290Y490T-DP (-GI)
Dual Phase 450 HCT450X (+ZE, +Z, +ZF)
Dual Phase 500 HCT490X (+ZE, +Z) CR290Y490T-DP (-UNC,-EG,-GI)
Dual Phase 600 HCT590X (+ZE, +Z, +ZF, +ZM) CR330Y590T-DP (-UNC,-EG,-GI,-GA,-ZM)
Dual Phase 780 Y450 HCT780X (+ZE, +Z, +ZF) CR440Y780T-DP (-GI,-GA)
Dual Phase 780 LCE Y450 HCT780X (+ZE) CR440Y780T-DP (-UNC,-EG)
Dual Phase 780 Y500
Dual Phase 780 LCE Y500
Dual Phase 980 LCE Y600 HCT980X (+ZE, +Z, +ZF) CR590Y980T-DP(-UNC,-EG,-GI,-GA)
Dual Phase 980 LCE Y660
Dual Phase 980 Y700 HCT980XG (+ZE) CR700Y980T-DP (-UNC,-EG)
Dual Phase 980 LCE Y700 HCT980XG (+ZE, +Z, +ZF) CR700Y980T-DP (-UNC,-EG,-GI)
Dual Phase 1180 HCT1180G2 (+ZE) CR900Y1180T-CP (-UNC,-EG)
Dual Phase 600 HDT580X HR330Y580T-DP (-UNC)
Dual Phase 780
 
Euronorms
Uncoated (EN 10338 :2015): Steel grade name
Electrogalvanized (EN 10338 :2015 + EN 10152 :2017): Steel grade name +ZE
Galvannealed (EN 10346 :2015): Steel grade name +ZF
Extragal® (EN 10346 :2015): Steel grade name +Z
Zagnelis® (EN 10346 :2015): Steel grade name +ZM

VDA 239-100
Uncoated: Steel grade name-UNC
Electrogalvanized: Steel grade name-EG
Galvannealed: Steel grade name-GA
Extragal®: Steel grade name-GI
Zagnelis®: Steel grade name-ZM
 
 Hot rolled      Cold rolled

FF 280 DP (Full Finished): grade specially developed for skin parts.

LCE: Low Carbon Equivalent grade used to optimize properties in service.
The above indicative table summarizes the European and VDA standards corresponding to the ArcelorMittal product range.

While the ArcelorMittal grades conform perfectly well to the indicated EN standards, ArcelorMittal grades generally offer tighter mechanical properties
(see table below).

TRIP (TRansformation Induced Plasticity) steels

2
TRIP (TRansformation Induced Plasticity) steels

  Euronorms VDA 239-100

TRIP 690 HCT690T (+ZE, +Z) CR400Y690T-TR (-UNC,-EG,-GI)
TRIP 780 HCT780T (+ZE, +ZF) CR450Y780T-TR (-UNC,-EG,-GA)
 
Euronorms
Uncoated (EN 10338 :2015): Steel grade name
Electrogalvanized (EN 10338 :2015 + EN 10152 :2017): Steel grade name +ZE
Galvannealed (EN 10346 :2015): Steel grade name +ZF
Extragal® (EN 10346 :2015): Steel grade name +Z

VDA 239-100
Uncoated: Steel grade name-UNC
Electrogalvanized: Steel grade name-EG
Galvannealed: Steel grade name-GA
Extragal®: Steel grade name-GI
 
 Hot rolled      Cold rolled

While the ArcelorMittal grades conform perfectly well to the indicated EN standards, ArcelorMittal grades generally offer tighter mechanical properties
(see table below).
The above indicative table summarizes the European and VDA standards corresponding to the ArcelorMittal product range.

Complex Phase steels

  Euronorms VDA 239-100

Complex Phase 600 HCT600C (+ZE)
Complex Phase 800 Y500
Complex Phase 800 Y600 HCT780C (+ZE, +Z) CR570Y780T-CP (-UNC,-EG,-GI)
Complex Phase 1000
Complex Phase 1000 SF HCT980C (+ZE) CR780Y980T-CP (-UNC,-EG)
Complex Phase 1000 Y800 HCT980C (+Z) CR780Y980T-CP (-GI)
Complex Phase 750 HDT750C (+Z)
Complex Phase 800 SF HDT780C (+Z) HR660Y760T-CP (-UNC,-GI)
Complex Phase 1000 HDT950C (+Z)
 
Euronorms
Uncoated (EN 10338 :2015): Steel grade name
Electrogalvanized (EN 10338 :2015 + EN 10152 :2017): Steel grade name +ZE
Galvannealed (EN 10346 :2015): Steel grade name +ZF
Extragal® (EN 10346 :2015): Steel grade name +Z

VDA 239-100
Uncoated: Steel grade name-UNC
Electrogalvanized: Steel grade name-EG
Galvannealed: Steel grade name-GA
Extragal®: Steel grade name-GI
 
 Hot rolled      Cold rolled

SF (Stretch Flanging): grade specially developed for improved stretch flangeability.

While the ArcelorMittal grades conform perfectly well to the indicated EN standards, ArcelorMittal grades generally offer tighter mechanical properties
(see table below).
The above indicative table summarizes the European and VDA standards corresponding to the ArcelorMittal product range.

Hot rolled ferrite-bainite steels

3
Hot rolled ferrite-bainite steels

  Euronorms VDA 239-100

FB 450 HDT450F (+Z) HR300Y450T-FB (-UNC,-GI)
FB 540
FB 560
FB 590 HDT580F(+Z) HR440Y580T-FB (-UNC,-GI)
FB 590 HHE* HDT580F HR440Y580T-FB (-UNC)
 
Euronorms
Uncoated (EN 10338 :2015): Steel grade name
Electrogalvanized (EN 10338 :2015 + EN 10152 :2017): Steel grade name +ZE
Galvannealed (EN 10346 :2015): Steel grade name +ZF
Extragal® (EN 10346 :2015): Steel grade name +Z

VDA 239-100
Uncoated: Steel grade name-UNC
Electrogalvanized: Steel grade name-EG
Galvannealed: Steel grade name-GA
Extragal®: Steel grade name-GI
 
 Hot rolled      Cold rolled

HHE: High Hole Expansion.

The above indicative table summarizes the European and VDA standards corresponding to the ArcelorMittal product range.

While the ArcelorMittal grades conform perfectly well to the indicated EN standards, ArcelorMittal grades generally offer tighter mechanical
properties (see table below).

High strength low alloy (HSLA) steels for cold forming

  Euronorms VDA 239-100

HC260LA (+ZE) /HX260LAD (+Z,
HSLA 260 CR240LA (-UNC,-EG,-GI,-GA)
+ZF, +ZA)
HC300LA (+ZE) /HX300LAD (+Z,
HSLA 300 CR270LA (-UNC,-EG,-GI,-GA)
+ZF, +ZA)
HC340LA (+ZE) /HX340LAD (+Z,
HSLA 340 CR300LA (-UNC,-EG,-GI,-GA)
+ZF, +ZA)
HC380LA (+ZE) /HX380LAD (+Z,
HSLA 380 CR340LA (-UNC,-EG,-GI,-GA)
+ZF, +ZA)
HC420LA (+ZE) /HX420LAD (+Z,
HSLA 420 CR420LA (-UNC,-EG,-GI,-GA)
+ZF, +ZA)
 
Euronorms
Uncoated ( EN 10268: 2006+A1: 2013): Steel grade name
Electrogalvanized (EN 10268 :2006+A1: 2013 + EN 10152 :2017): Steel grade name +ZE
Galvannealed (EN 10346 :2015): Steel grade name +ZF
Extragal® (EN 10346 :2015): Steel grade name +Z
Galfan (EN 10346 :2015): Steel grade name +ZA

VDA 239-100
Uncoated: Steel grade name-UNC
Electrogalvanized: Steel grade name-EG
Galvannealed: Steel grade name-GA
Extragal®: Steel grade name-GI
 
 Hot rolled      Cold rolled

While the ArcelorMittal grades conform perfectly well to the indicated EN standards, ArcelorMittal grades generally offer tighter mechanical properties
(see table below).

4
 While the ArcelorMittal grades conform perfectly well to the indicated EN standards, ArcelorMittal grades generally offer tighter mechanical properties
(see table below).

  Euronorms VDA 239-100

HSLA 320 S315MC/HX340LAD (+Z) HR300LA (-UNC,-GI)
HSLA 360 S355MC/HX380LAD (+Z) HR340LA (UNC,-GI)
HSLA 420 S420MC/HX420LAD (+Z) HR420LA (-UNC,-GI)
HSLA 460 S460MC/HX460LAD (+Z) HR460LA (-UNC,-GI)
HSLA 500 S500MC/HX500LAD (+Z) HR500LA (-UNC,-GI)
HSLA 550 S550MC HR550LA (-UNC,-GI)
 
Euronorms
Uncoated (EN 10149-2 :1995): Steel grade name

VDA 239-100
Uncoated: Steel grade name-UNC
Extragal®: Steel grade name-GI
   
 Hot rolled      Cold rolled

While the ArcelorMittal grades conform perfectly well to the indicated EN standards, ArcelorMittal grades generally offer tighter mechanical
properties (see table below).
The above indicative tables summarize the European and VDA standards corresponding to the ArcelorMittal product range.

Bake hardening steels

  Euronorms VDA 239-100

HC180B (+ZE) /HX180BD (+Z, +ZF,
180 BH CR180BH (-UNC,-EG,-GI,-GA,-ZM)
+ZM)
195 BH
HC220B (+ZE) /HX220BD (+Z, +ZF,
220 BH CR210BH (-UNC,-EG,-GI,-GA,-ZM)
+ZM)
260 BH HC260B (+ZE) /HX260BD (+Z, +ZM) CR240BH (-UNC,-EG,-GI,-ZM)
300 BH HC300B (+ZE) /HX300BD (+Z) CR270BH (-UNC,-EG,-GI)
 
Euronorms
Uncoated ( EN 10268: 2006+A1: 2013): Steel grade name
Electrogalvanized (EN 10268 :2006+A1: 2013 + EN 10152 :2017): Steel grade name +ZE
Galvannealed (EN 10346 :2015): Steel grade name +ZF
Extragal®/Ultragal® for visible parts (EN 10346 :2015): Steel grade name +Z
Zagnelis® (EN 10346 :2015): Steel grade name +ZM

VDA 239-100
Uncoated: Steel grade name-UNC
Electrogalvanized: Steel grade name-EG
Galvannealed: Steel grade name-GA
Extragal®/Ultragal® for visible parts: Steel grade name-GI
Zagnelis®: Steel grade name-ZM
 
 Hot rolled      Cold rolled

While the ArcelorMittal grades conform perfectly well to the indicated EN standards, ArcelorMittal grades generally offer tighter mechanical properties
(see table below).
The above indicative table summarizes the European and VDA standards corresponding to the ArcelorMittal product range.

High strength IF steels

5
High strength IF steels

  Euronorms VDA 239-100

HC180Y (+ZE) /HX180YD (+Z, +ZF,
IF 180 CR180IF (-UNC,-EG,-GI,-GA,-ZM)
+ZM)
HC220Y (+ZE) /HX220YD (+Z, +ZF,
IF 220 CR210IF (-UNC,-EG,-GI,-GA,-ZM)
+ZM)
HC260Y (+ZE) /HX260YD (+Z, +ZF,
IF 260 CR240IF (-UNC,-EG,-GI,-GA,-ZM)
+ZM)
IF 300 /HX300YD (+Z, +ZF, +ZM)
 
Euronorms
Uncoated ( EN 10268: 2006+A1: 2013): Steel grade name
Electrogalvanized (EN 10268 :2006+A1: 2013 + EN 10152 :2017): Steel grade name +ZE
Galvannealed (EN 10346 :2015): Steel grade name +ZF
Extragal®/Ultragal® for visible parts (EN 10346 :2015): Steel grade name +Z
Zagnelis® (EN 10346 :2015): Steel grade name +ZM

VDA 239-100
Uncoated: Steel grade name-UNC
Electrogalvanized: Steel grade name-EG
Galvannealed: Steel grade name-GA
Extragal®/Ultragal® for visible parts: Steel grade name-GI
Zagnelis®: Steel grade name-ZM
 
 Hot rolled      Cold rolled

While the ArcelorMittal grades conform perfectly well to the indicated EN standards, ArcelorMittal grades generally offer tighter mechanical properties
(see table below).
The above indicative table summarizes the European and VDA standards corresponding to the ArcelorMittal product range.

Solid solution steels

  Euronorms VDA 239-100

H 220 HC220P (+ZE)
H 260 HC260P (+ZE)
H 300 HC300P (+ZE)
 
Euronorms
Uncoated ( EN 10268: 2006+A1: 2013): Steel grade name
Electrogalvanized (EN 10268 :2006+A1: 2013 + EN 10152 :2017): Steel grade name +ZE

VDA 239-100
 
 Hot rolled      Cold rolled

While the ArcelorMittal grades conform perfectly well to the indicated EN standards, ArcelorMittal grades generally offer tighter mechanical properties
(see table below).
The above indicative table summarizes the European and VDA standards corresponding to the ArcelorMittal product range.

High formability steels for drawing

  Euronorms VDA 239-100

ArcelorMittal 01 DC01 (+ZE)
ArcelorMittal 02 CR1 (-UNC,-EG)
ArcelorMittal 03 DC03 (+ZE) CR2 (-UNC,-EG)
ArcelorMittal 04 DC04 (+ZE) CR3 (-UNC,-EG)
ArcelorMittal 05 DC05 (+ZE) CR4 (-UNC,-EG)
ArcelorMittal 06 DC06 (+ZE) CR5 (-UNC,-EG)
ArcelorMittal 07 DC07 (+ZE)
 
Euronorms
Uncoated (EN 10130 :2006): Steel grade name
Electrogalvanized (EN 10152 :2017): Steel grade name +ZE

VDA 239-100
Uncoated: Steel grade name-UNC
Electrogalvanized: Steel grade name-EG
 
 Hot rolled      Cold rolled

6
   Euronorms VDA 239-100
ArcelorMittal 51 DX51D (+Z, +ZF)
ArcelorMittal 52 DX52D (+Z, +ZF) CR1 (-GI,-GA)
ArcelorMittal 53 DX53D (+Z, +ZF, +ZM) CR2 (-GI,-GA,-ZM)
ArcelorMittal 54 DX54D (+Z, +ZF, +ZM) CR3 (-GI,-GA,-ZM)
ArcelorMittal 56 DX56D (+Z, +ZF, +ZM) CR4 (-GI,-GA,-ZM)
ArcelorMittal 57 DX57D (+Z, +ZF, +ZM) CR5 (-GI,-GA,-ZM)
 
Euronorms
Galvannealed (EN 10346 :2015): Steel grade name +ZF
Extragal®/Ultragal® for visible parts (EN 10346 :2015): Steel grade name +Z
Zagnelis® (EN 10346 :2015): Steel grade name +ZM

VDA 239-100
Galvannealed: Steel grade name-GA
Extragal®/Ultragal® for visible parts: Steel grade name-GI
Zagnelis®: Steel grade name-ZM
 
 Hot rolled      Cold rolled

  Euronorms VDA 239-100

ArcelorMittal 11 DD11
ArcelorMittal 12 DD12
ArcelorMittal 13 DD13 HR2 (-UNC,-GI)
ArcelorMittal 14 DD14
ArcelorMittal 15
ArcelorMittal 16
 
Euronorms
Uncoated (EN 10111 :2008): Steel grade name

VDA 239-100
Uncoated: Steel grade name-UNC
Extragal®: Steel grade name-GI
 
 Hot rolled      Cold rolled

While the ArcelorMittal grades conform perfectly well to the indicated EN standards, ArcelorMittal grades generally offer tighter mechanical properties
(see table below).
The above indicative tables summarize the European and VDA standards corresponding to the ArcelorMittal product range.

®
Steels for cold stamping -Fortiform

  Euronorms VDA 239-100

®
Fortiform 980
®
Fortiform 1050 CR700Y980T-DH(-UNC,-EG)
®
Fortiform 1180
 
Euronorms

VDA 239-100

The above indicative table summarizes the European and VDA standards corresponding to the ArcelorMittal product range.

®
MartINsite steels

7
MartINsite steels

  Euronorms VDA 239-100

®
MartINsite 1200
®
MartINsite 1500 CR1220Y1500T-MS(-UNC,-EG)
 
Euronorms

VDA 239-100
 
 Hot rolled      Cold rolled

The above indicative table summarizes the European and VDA standards corresponding to the ArcelorMittal product range.

© ArcelorMittal | Last update: 14-03-2017