Scribd
Upload
111 views3 pages

Intra-Frequency Measurement Reporting Criteria

The document describes various measurement reporting criteria for different types of measurements in a wireless network, including: 1) Intra-frequency measurement reporting criteria which includes events when a Primary CPICH enters/leaves a reporting range or becomes better/worse than a threshold. 2) Inter-frequency measurement reporting criteria which includes events when the quality of a used/non-used frequency is above/below a threshold. 3) Inter-system measurement reporting criteria which includes events when the quality of a used UTRAN frequency or other system is above/below a threshold.

Uploaded by

Muhammad Haris
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
111 views3 pages

Intra-Frequency Measurement Reporting Criteria

The document describes various measurement reporting criteria for different types of measurements in a wireless network, including: 1) Intra-frequency measurement reporting criteria which includes events when a Primary CPICH enters/leaves a reporting range or becomes better/worse than a threshold. 2) Inter-frequency measurement reporting criteria which includes events when the quality of a used/non-used frequency is above/below a threshold. 3) Inter-system measurement reporting criteria which includes events when the quality of a used UTRAN frequency or other system is above/below a threshold.

Uploaded by

Muhammad Haris
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

Intra-frequency measurement reporting criteria.

The triggering of the event-triggered reporting for an intra-frequency


measurement. All events concerningintrafrequency measurements are labelled 1x
where x is a, b, c….
Event 1a:
A Primary CPICH enters the Reporting Range.
Event 1b:
A Primary CPICH leaves the Reporting Range.
Event 1c:
A Non-active Primary CPICH becomes better than an active
Primary CPICH.
Event 1d:
Change of best cell.
Event 1e:
A Primary CPICH becomes better than an absolute threshold.
Event 1f:
A Primary CPICH becomes worse than an absolute threshold.
Inter-frequency measurement reporting criteria.
The triggering of the event-triggered reporting for an inter-frequency
measurements. All events concerninginterfrequency measurements are labelled 2x
where x is a,b,c..
Event 2a:
Change of best frequency.
Event 2b:
The estimated quality of the currently used frequency is below a certain threshold
and
theestimated quality of a non-used frequency is above a certain threshold.
Event 2c:
The estimated quality of a non-used frequency is above a certain threshold
Event 2d:
The estimated quality of the currently used frequency is below a certain threshold
Event 2e:
The estimated quality of a non-used frequency is below a certain threshold
Event 2f:
The estimated quality of the currently used frequency is above a certain threshold

Inter-system measurement reporting criteria.


The triggering of the event-triggered reporting for an inter-system measurement.
All events concerninginter-system measurements are labelled 3x where x is a,b,c..
Event 3a:
The estimated quality of the currently used UTRAN frequency is below a certain
threshold
and
the estimated quality of the other system is above a certain threshold.
Event 3b:
The estimated quality of other system is below a certain threshold
Event 3c:
The estimated quality of other system is above a certain threshold
Event 3d:
Change of best cell in other system

Traffic volume measurement reporting criteria.


Contains the measurement reporting criteria information for a traffic volume
measurement.
Event 4a:
RLC buffer payload exceeds an absolute threshold.
Event 4b:
RLC buffer payload becomes smaller than an absolute threshold.

UE internal measurement reporting criteria.


The triggering of the event-triggered reporting for a UE internal measurement. All
events concerning UEinternal measurements are labelled 6x where x is a, b, c…. In
TDD, the events 6a - 6d are measured andreported on timeslot basis.
Event 6a:
The UE Transmitted Power becomes larger than an absolute threshold
Event 6b:
The UE Transmitted Power becomes less than an absolute threshold
Event 6c:
The UE Transmitted Power reaches its minimum value
Event 6d:
The UE Transmitted Power reaches its maximum value
Event 6e:
The UE RSSI reaches the UEs dynamic receiver range
Event 6f:
The UE Rx-Tx time difference for a RL included in the active set becomes larger
than anabsolute threshold
Event 6g:
The UE Rx-Tx time difference for a RL included in the active set becomes
less than an absolutethreshold

You might also like