TOTALLY ENCLOSED FAN COOLED INDUCTION MOTORS OF GENERAL USE TYPE ASU

The enclosed induction motor of general use range is meant for industrial application such as driving of machine tools, pumps,
fans, compressors a.s.o

The motors are intended to operate under the following environmental conditions:
- Temperature: - 330 C.........+ 400 C
0
- Relative humidity: max. 80% la 20 C
- Maximum altitude of installation: 1000 m (3000 feet) (above sea level).

The motors are manufactured in accordance with the requirements of the following standards:
- EN 60034-1:2004 – Rotating electrical machines. Part 1: Rating and performance.
- SR 1893:2008 – Rotating electrical machines. Rules and methods for quality control.
- STAS 1893/3 - 87 - Rotating electrical machines. Marking, packing, supply, documents, guarantees.
- EN 60034-6:1993 - Rotating electrical machines -- Part 6: Methods of cooling (IC Code).
- EN 60034-7:1996/A1:2001 - Rotating electrical machines. Part 7: Classification of types of construction, mounting arrangements
and terminal box position (IM Code).
- EN 60034-9:2005 - Rotating electrical machines -- Part 9: Noise limits.
- EN 60034-14:2004/A1:2007 - Rotating electrical machines -- Part 14: Mechanical vibration of certain machines with shaft
heights 56 mm and higher - Measurement, evaluation and limits of vibration severity.
- CEI 60034-17:2002 - Rotating electrical machines - Part 17: Cage induction motors when fed from converters. Application guide
- EN 60529:1991/A1:2000 – Degrees of protection provided by enclosures (IP code).
- CEI 60072-1:1991 - Dimensions and ouput series for rotating electrical machines. Part 1: Frame numbers 56 to 400 and flange
numbers 55 to 1080.

The motors are manufactured using class F insulating materials.

Terminal box could be equipped with 1 or 2 cable glands.
The presser size and the supply cable maximum diameter allowed by the cable entry are given in the table 1.

Table 1

Motor type Frame size Presser size Supply cable max diameter
63, 71, 80, 90 1 x IPE 16 1 x M25 10.5 12.5
100, 112 1 x IPE 16 1 x M25 10.5 12.5
132 2 x IPE 29 2 x M32 26.4 21
160, 180 2 x IPE 29 2 x M40 26.4 26.5
ASU 200, 225 2 x IPE 36 2 x M50 32 35
250 2 x IPE 42 2 x M50 38 35
280 2 x IPE 42 2 x M63 38 44
315 2 x IPE 48 2 x M63 44 44
355 - 2 x M63 - 44
Optionally All frame sizes 1 x IPE 16 1 x M20 10.5 11

To connect the supply cable, the motors are equipped with a terminal plate having 6 terminals. The terminal box is normally
positioned on the top of the motor. The motors have earthing screws on the frame and inside the terminal box. The motors
are provided with rolling-contact bearings. The 280-315 frame size motors are equipped with lubricating system permitting the
rolling bearing lubrication while the motors are operating. The bearings are not dimensioned to stand axial forces outside the
motors. The bearing types are shown in the table 2.

INDUCTION MOTORS CATALOGUE

1
 Table 2 Table 3

Drive end Non-drive end Frequency Noise level

Frame size
2p=2 2p=4,6,8 2p=2 2p=4,6,8 [Hz] dB(A)
”50 ”5
63 6202 2Z 6202 2Z
60 6
71 6203 2Z 6203 2Z 70 10
80 6304 2Z 6304 2Z 80 13
85 15
90 6305 2Z 6305 2Z
100 6306 2Z 6306 2Z
112 6307 2Z 6307 2Z The producer may use other bearing types as well.
The most commonly used mounting arrangements are
132 6308 2Z 6308 2Z IM1001, 1011, 2001, 3001, 3011 according to EN
160 6310 2Z 6310 2Z 60034-7:1993 (IEC 34-7; DIN IEC 34-7 part.7).
Excepting the IM1011 and IM3011 mounting
180 6311 2Z 6311 2Z arrangements, the motors having two free shaft ends
200 6313 2Z 6313 2Z are also available upon request.
The protection degree of the motors is IP 55, according
225 6314 2Z 6314 2Z to EN 60034-5:2001 (IEC 34-5; DIN VDE 0530-part.5 ).
250 6314 2Z 6314 2Z The cooling system of the motors is IC 411 according
EN 60034-6:1993. Cooling fluid is environement air.
280 6316 6316 Motor cooling is doune by a fan mounted on the motor
315 SM 6317 6317 shaft.
The rated duty of the motors is the continuous duty S1,
315 ML 6316 6319 6316 6319 according to EN 60034-1:2004 (IEC 34-1; DIN VDE
355 6319 6322 6319 6322 0530 - part.1).

The nominal parameters shown in the tables refer to a service factor SF=1.
Motors have to be supplied with 3 phase voltage according to norms EN 60034-1:2004. Motors in frame size 63-90 can be
supplied with max. voltage of 500V and motors in frame sizes 100- 315 can be supplied with max voltage of 690V. Rated
frequency is 50 Hz. The usual voltages are: 220 V, 230 V, 380 V, 400 V, 415 V, 440 V, 460 V, 480 V, 500 V, 660 V and 690 V.
The allowed voltage fluctuation is ±5% of rated voltage. On request, the motors could be manufactured for frequency of 60Hz.

The motors can also be fed from PWM frequency converters (VACON or similar) according to the torque/speed characteristic
M=f(Hz) given in Annex 1. In case of motors supplied from frequency converters - puls width modulation control, vibration levels
are according to EN 60034-14:2004/A1:2007, vibration level may increase for motors in load in certain frequency ranges
according to IEC TS 60034-25:2007.

Maximum noise levels of motors are according to EN 60034-9 :2005/A1:2007.

The noise level of self ventilated motors supplied from frequency converters increases when motors speed increases.

The expected average values of added noise levels compaired with noise levels indicated in EN 60034-9:2005 are mentioned in
table 3.

The magnetic noise of the motors supplied from frequency converters can be kept inside allowed range by means of frequency
converter controller.

On request, the motors can be equipped with the following optional devices:
- PTC thermistors in stator winding
- PT 100 (thermoresistance) in stator winding or bearings
- heating resistance

The options have to be agreed with the manufacturer.

The technical parameter tolerances are in keeping with EN 60034-1:2004 and are shown in table 4.

INDUCTION MOTORS CATALOGUE

2
Table 4

No Parameter name Tolerances

Efficiency - power lower - 15% din (1-Ș)
1 than or equal to 50kW
- power higher than 50kW - 10% din (1-Ș)

2 Power factor (cos ij) 1/6 of (1-cos ij), min 0,02 and max 0,07
Slip (at full load and
3 + / - 20% of the slip guaranted value
operating temperature)
4 Initial starting current + 20% of the guaranteed starting current (without lower limit)

- 15% .... + 25% of the guaranteed value

5 Initial starting torque
(+ 25% only on express demand)
- 10% of the torque guaranteed value, with the specification that after applying this
6 Maximum torque tolerance, the torque should remain equal or higher than 1.6 or 1.5 times the nominal
torque

Annex 1 - Torque/speed characteristic of the motors fed from PWM frequency converters

1.1

0.9
Frame Size 200 – 355
0.8
Frame Size 63 – 180
0.7
M/Mn[%]

0.6

0.5

0.4

0.3

0.2

0.1

0
0 10 20 30 40 50 60 70 80 90 100
f[Hz]

INDUCTION MOTORS CATALOGUE

3
 Standard asynchronous motors - TECHNICAL PARAMETERS
Current Ip Mp Mmax
Rated power Rated speed K Cos Weight
Motor type (400V)
[kW] [rpm]  M In Mn Mn [kg]
[A]
2 poles
ASU 63a-2 0,18 2640 0,59 58,5 0,75 4,5 2,8 3,1 9,1
ASU 63b-2 0,25 2650 0,73 66,1 0,75 4,5 3,5 3,1 10,0
ASU 71a-2 0,37 2650 0,99 66.5 0,81 4,5 2,4 2,4 12,6
ASU 71b-2 0,55 2660 1,41 68,0 0,83 4,5 2,4 2,4 14,1
ASU 80a-2 0,75 2675 1,81 73,0 0,82 4,5 2,7 2,7 17,8
ASU 80b-2 1,1 2680 2,51 76.3 0,83 4,8 2,7 2,7 19,8
ASU 90S-2 1,5 2680 3,28 78,5 0,84 5,0 2,4 2,5 26,0
ASU 90L-2 2,2 2700 4,64 81,5 0,84 5,0 2,4 2,8 28,8
ASU 100LW-2 3 2825 6,14 83,0 0,85 5,0 3,0 2,9 38,0
ASU 112M-2 4 2850 8,06 84,3 0,85 6,0 3,1 3,1 49,0
ASU 132Sa-2 5,5 2860 10,8 85,9 0,86 6,5 3,1 2,6 75,0
ASU 132Sb-2 7,5 2860 14,6 87,1 0,85 6,5 3,1 2,5 80,0
ASU 160Ma-2 11 2900 21,1 88,6 0,85 6,3 2,4 2,4 105
ASU 160Mb-2 15 2900 28,1 89,5 0,86 6,3 2,4 2,4 120
ASU 160L-2 18,5 2910 34,2 90,3 0,86 6,5 2,4 2,5 135
ASU 180M-2 22 2920 40,2 90,8 0,87 6,5 2,5 2,8 175
ASU 200La-2 30 2930 54,4 91,5 0,87 7,0 2,5 2,7 235
ASU 200Lb-2 37 2930 67,1 92,5 0,86 7,0 2,7 2,9 265
ASU 225M-2 45 2940 80,5 92,8 0,87 7,0 2,2 2,5 330
ASU 250M-2 55 2940 97,9 93,2 0,87 7,8 2,2 2,45 430
ASU 280S-2 75 2945 134 94,0 0,86 7,1 2,3 3,0 520
ASU 280M-2 90 2960 155 94,0 0,89 7,8 2,4 2,4 600
ASU 315S-2 110 2965 187 94,5 0,90 7,7 2,3 2,6 710
ASU 315M-2 132 2970 219 94,5 0,92 7,9 2,1 2,8 810
ASU 315MX-2 160 2970 268 94,9 0,91 7,5 2,3 2.4 1130
ASU 315LY-2 200 2975 334 95,1 0,91 7,8 2,3 2.4 1250
ASU 355Ma-2 250 2975 431 95,1 0,88 6,3 2,2 2,8 1300
ASU 355Mb-2 280 2975 483 95,1 0,88 6,0 2,0 2,5 1380
ASU 355L-2 315 2975 542 95,3 0,88 6,3 2,3 2,9 1510
4 poles
ASU 63a-4 0,12 1320 0,43 58,1 0,69 3,5 2,4 2,4 10,0
ASU 63b-4 0,18 1320 0,62 60,2 0,70 3,5 3,1 3,1 11,2
ASU 71a-4 0,25 1330 0,77 66,8 0,70 3,5 2,4 2,7 14,1
ASU 71b-4 0,37 1330 1,04 71,6 0,72 3,5 2,5 2,5 15,1
ASU 80a-4 0,55 1350 1,51 72,1 0,73 4,0 2,7 2,7 18,8
ASU 80b-4 0,75 1380 1,99 74,6 0,73 4,5 2,7 3,0 19,8
ASU 90S-4 1,1 1390 2,70 76,4 0,77 4,5 2,8 2,6 25,8
ASU 90L-4 1,5 1380 3,59 78,3 0,77 5,0 3,0 2,5 28,8
ASU 100LW-4 2,2 1420 5,02 81,1 0,78 5,0 2,5 2,6 38,0
ASU 100LX-4 3 1410 6,69 83,0 0,78 5,5 2,5 2,6 41,0
ASU 112M-4 4 1420 8,49 85,0 0,80 5,5 2,4 2,8 51,0
ASU 132S-4 5,5 1445 11,0 87,0 0,83 6,0 2,4 2,7 80,0
ASU 132M-4 7,5 1455 15,3 87,1 0,81 6,0 2,4 2,6 100
ASU 160M-4 11 1440 20,3 89,0 0,88 6,5 2,2 2,4 115
ASU 160L-4 15 1440 27,4 90,0 0,88 6,5 2,3 2,4 135
ASU 180M-4 18,5 1450 33,2 90,5 0,89 7,0 2,0 2,4 170
ASU 180L-4 22 1460 39,2 91,0 0,89 7,0 2,0 2,4 180
ASU 200L-4 30 1460 53,2 91,5 0,89 7,0 2,0 2,6 240
ASU 225S-4 37 1470 66,3 92,6 0,87 6,5 2,0 2,6 300
ASU 225M-4 45 1470 79,4 93,0 0,88 6,5 2,2 2,4 325
ASU 250M-4 55 1460 96,0 94,0 0,88 7,5 2,4 2,6 430
ASU 280S-4 75 1460 134 94,0 0,86 7,3 2,4 3,0 530
ASU 280M-4 90 1470 158 94,5 0,87 7,6 2,1 2,2 610
ASU 315S-4 110 1470 188 95,0 0,89 7,2 2,1 3,0 720
ASU 315M-4 132 1470 225 95,0 0,89 7,4 2,0 3,0 820
ASU 315MX-4 160 1480 276 95,0 0,88 6,8 2,1 2.2 1150
ASU 315LZ-4 200 1480 345 95,2 0,88 6,7 2,1 2.2 1315
ASU 355Ma-4 250 1485 430 95,3 0,88 6,5 2,3 2,3 1530

INDUCTION MOTORS CATALOGUE

4
 Current Ip Mp Mmax
Rated power Rated speed K Cos Weight
Motor type (400V)
[kW] [rpm]  M In Mn Mn [kg]
[A]
ASU 355Mb-4 280 1485 476 95,5 0,89 6,3 2,4 2,4 1630
ASU 355L-4 315 1485 535 95,5 0,89 6,6 2,5 2,5 1850

6 poles
ASU 71a-6 0,18 900 0,58 61,0 0,74 3,0 2,1 2,4 14
ASU 71b-6 0,25 900 0,74 65,0 0,75 3,6 2,2 2,6 15
ASU 80a-6 0,37 900 1,16 62,0 0,74 3,0 2,0 2,3 18,8
ASU 80b-6 0,55 910 1,68 67,5 0,70 3,5 1,9 2,5 19,8
ASU 90S-6 0,75 920 2,03 70,1 0,76 3,5 1,9 2,7 25,8
ASU 90L-6 1,1 920 2,82 74,0 0,76 4,5 1,9 2,6 28,8
ASU 100LX-6 1,5 955 3,73 75,3 0,77 4,5 2,0 2,2 41
ASU 112M-6 2,2 960 5,22 79,0 0,77 5,5 2,0 2,3 50
ASU 132S-6 3 955 6,94 81,0 0,77 6,0 2,1 2,8 80
ASU 132Ma-6 4 955 8,70 84,0 0,79 6,0 2,1 2,4 90
ASU 132Mb-6 5,5 955 11,1 86,5 0,83 6,0 2,1 2,5 100
ASU 160M-6 7,5 960 14,8 88,3 0,83 6,0 2,0 2,1 115
ASU 160L-6 11 960 22,4 88,7 0,80 6,0 2,0 2,1 135
ASU 180L-6 15 960 29,0 89,0 0,84 6,0 2,0 2,5 180
ASU 200La-6 18,5 970 34,0 90,5 0,87 6,1 2,0 2,5 225
ASU 200Lb-6 22 970 40,1 90,0 0,88 7,0 2,1 2,4 278
ASU 225M-6 30 970 53,8 91,5 0,88 6,5 2,0 2,1 325
ASU 250M-6 37 975 69,2 93,0 0,83 7,8 2,4 2,7 430
ASU 280S-6 45 975 81,3 94,0 0,85 7,1 2,2 2,0 530
ASU 280M-6 55 980 101 94,0 0,84 6,7 2,0 2,1 610
ASU 315S-6 75 980 134 94,0 0,86 6,3 2,0 2,5 690
ASU 315M-6 90 980 154 94,5 0,89 7,7 2,2 2,4 720
ASU 315MX-6 110 985 198 94,5 0,85 6,7 2,0 2.2 1090
ASU 315LX-6 132 985 240 94,5 0,84 6,1 2,2 2.2 1110
ASU 315LY-6 160 985 284 94,5 0,86 6,1 2,2 2.2 1210
ASU 355M-6 200 987 341 95,1 0,89 6,0 2,1 2,1 1530
ASU 355L-6 250 989 430 95,3 0,88 7,0 2,5 2,5 1600
8 poles
ASU 71-8 0,09 630 0,45 50,0 0,58 2,9 2,6 3,2 15
ASU 80a-8 0,18 660 0,87 50,0 0,60 2,9 2,7 3,3 18,8
ASU 80b-8 0,25 670 1,12 52,0 0,62 3,0 2,7 2,7 19,8
ASU 90S-8 0,37 680 1,54 55,0 0,63 3,1 2,7 3,1 25,8
ASU 90L-8 0,55 690 2,04 60,0 0,65 3,0 2,7 2,7 28,8
ASU 100LW-8 0,75 700 2,45 64,0 0,69 3,3 3,0 2,3 36
ASU 100LX-8 1,1 705 3,36 70,5 0,67 4,1 2,0 2,3 41
ASU 112M-8 1,5 705 4,18 73,0 0,71 4,1 2,0 2,0 51
ASU 132S-8 2,2 710 6,22 78,5 0,65 5,0 1,8 2,0 80
ASU 132M-8 3 712 7,23 82,0 0,73 5,0 1,8 2,2 100
ASU 160Ma-8 4 720 10,2 82,2 0,69 5,0 1,9 2,0 105
ASU 160Mb-8 5,5 720 13,4 84,5 0,70 5,2 1,9 2,2 115
ASU 160L-8 7,5 720 18,2 85,1 0,70 5,0 2,0 2,1 135
ASU 180L-8 11 720 25,6 86,5 0,71 6,0 2,1 2,1 190
ASU 200L-8 15 720 31,2 89,0 0,78 6,0 1,8 2,5 278
ASU 225S-8 18,5 730 41,2 90,0 0,72 6,0 2,3 2,2 300
ASU 225M-8 22 730 49,0 91,3 0,71 6,0 2,3 2,2 325
ASU 250M-8 30 730 58,8 92,0 0,80 6,0 2,2 2,3 430
ASU 280S-8 37 735 71,8 93,0 0,80 6,0 1,8 1,9 530
ASU 280M-8 45 735 87,3 93,0 0,80 6,2 1,8 2,5 610
ASU 315S-8 55 735 106 93,0 0,81 6,0 1,8 2,2 690
ASU 315M-8 75 735 146 93,0 0,80 6,3 1,9 2,5 720
ASU 315MX-8 90 735 175 94,0 0,79 5,9 1,8 2,0 1110
ASU 315LY-8 110 735 214 94,0 0,79 5,9 1,8 2,0 1200
ASU 315LZ-8 132 735 260 94,0 0,78 5,5 1,8 2,0 1315
ASU 355M-8 160 739 293 95,0 0,83 6,0 2,0 2,0 1550
ASU 355L-8 200 739 366 95,1 0,83 5,5 2,0 2,0 1630

INDUCTION MOTORS CATALOGUE

5
 ASU - IM 1001 (IMB3) series induction motors

D
F
Frame A B C H K E GA d HD L BB AB AA HA AC
Nom. Tol. h9
size
63 100 80 40 63 7 11 j6 23 4 12.5 M4 162 258 104 131 31 9 125
71 112 90 45 71 7 14 j6 30 5 16 M5 182 295 125 141 37 9 140
80 125 100 50 80 10 19 j6 40 6 21.5 M6 216 287 125 155 35 9 158
90S 140 100 56 90 10 24 j6 50 8 27 M8 238 339 150 170 37 9 177
90L 140 125 56 90 10 24 j6 50 8 27 M8 238 339 150 170 37 9 177
100LW 160 140 63 100 12 28 j6 60 8 31 M10 257 387 176 200 47 10 199
100LX 160 140 63 100 12 28 j6 60 8 31 M10 257 387 176 200 47 10 199
112M 190 140 70 112 12 28 j6 60 8 31 M10 284 406 176 224 55 12 221
132S 216 140 89 132 12 38 k6 80 10 41 M12 333 496 220 264 68 14 263
132M 216 178 89 132 12 38 k6 80 10 41 M12 333 496 220 264 68 14 263

INDUCTION MOTORS CATALOGUE

6
 ASU - IM 3001 (IMB5) series induction motors

D
Frame M N P S T E F h9 GA d AC HD L
siz e Nom. Tol.

63 115 95 140 10 3 11 j6 23 4 12.5 M4 125 99 258

71 130 110 160 10 3.5 14 j6 30 5 16 M5 140 111 295

80 165 130 200 12 3.5 19 j6 40 6 21.5 M6 158 136 287

90S 165 130 200 12 3.5 24 j6 50 8 27 M8 177 148 339

90L 165 130 200 12 3.5 24 j6 50 8 27 M8 177 148 339

100LW 215 180 250 14.5 4 28 j6 60 8 31 M10 199 157 387

100LX 215 180 250 14.5 4 28 j6 60 8 31 M10 199 157 387

112M 215 180 250 14.5 4 28 j6 60 8 31 M10 221 172 406

132S 265 230 300 14.5 4 38 k6 80 10 41 M12 263 201 496

132M 265 230 300 14.5 4 38 k6 80 10 41 M12 263 201 496

INDUCTION MOTORS CATALOGUE

7
 ASU - IM 1001 (IMB3) series induction motors

D
Frame E F h9 GA d L
A B C H K nom. AA AB BB HA AC HD
size tol.
2p=2 2p>2 2p=2 2p>2 2p=2 2p>2 2p=2 2p>2 2p=22p>2 2p=2 2p>2
160M 254 210 108 160 14.5 42 k6 110 12 45 M16 310 298 14 315 404 630
160L 254 254 108 160 14.5 42 k6 110 12 45 M16 84 310 298 14 315 404 630
180M 279 241 121 180 14.5 48 k6 110 14 51,5 M16 72 350 295 18 355 438 668
180L 279 279 121 180 14.5 48 k6 110 14 51,5 M16 72 350 335 18 355 438 708
200L 318 305 133 200 18.5 55 m6 110 16 59 M20 70 380 367 17 395 507 780
225S 356 286 149 225 18.5 - 60 m6 - 140 - 18 - 64 M20 80 425 358 22 445 552 - 840
225M 356 311 149 225 18.5 55 60 m6 110 140 16 18 59 64 M20 80 425 383 22 445 552 835 865
250M 406 349 168 250 24 60 65 m6 140 140 18 18 64 69 M20 95 490 440 20 494 607 925 925
280S 457 368 190 280 24 65 75 m6 140 140 18 20 69 79,5 M20 125 540 523 20 494 677.5 986
280M 457 419 190 280 24 65 75 m6 140 140 18 20 69 79,5 M20 125 540 523 20 494 677.5 986
315S 508 406 216 315 28 65 80 m6 140 170 18 22 69 85 M20 130 590 580 25 554 819 1109 1139
315M 508 457 216 315 28 65 80 m6 140 170 18 22 69 85 M20 130 590 580 25 554 819 1109 1139
315MX/LX 508 457 216 315 28 65 80 m6 140 170 18 22 69 85 M20 130 590 607 25 623 819 1232 1292
315LY/LZ 508 508 216 315 28 65 80 m6 140 170 18 22 69 85 M20 130 590 607 25 623 819 1232 1292
355Ma 610 560 254 355 28 70 100 m6 140 210 20 28 74.5 106 M20 M24 110 714 695 32 698 920 1370 1480
355Mb 610 560 254 355 28 70 100 m6 140 210 20 28 74.5 106 M20 M24 110 714 695 32 698 920 1370 1480
355L 610 630 254 355 28 70 100 m6 140 210 20 28 74.5 106 M20 M24 110 714 765 32 698 920 1450 1560

INDUCTION MOTORS CATALOGUE

8
 ASU - IM 3001 (IMB5) series induction motors

DD
Frame EE F h9
F h9 GAGA d d L L
M
M Nj6
Nj6 PP SS TT nom.
nom. AC ACHD HD LB LB
size tol.
tol.
2p=2
2p=22p>2
2p>2 2p=2 2p=22p>2
2p>22p=2
2p=22p>2
2p>2
2p=2
2p=22p>2
2p>2
2p=2
2p=2
2p>2
2p>2 2p=22p=2
2p>22p>2
160M 300
300 250
250 350
350 18.5
18.5 55 4242 k6k6 110
110 1212 45 45 M16M16 315315244244 520520 630 630
160L 300
300 250
250 350
350 18.5
18.5 55 4242 k6k6 110
110 1212 45 45 M16
M16 315315
244244 520520 630 630
180M 300
300 250
250 350
350 18.5
18.5 55 4848 k6k6 110
110 1414 51,5
51,5 M16
M16 355355
258258 558558 668 668
180L 300
300 250
250 350
350 18.5
18.5 55 4848 k6k6 110
110 1414 51,5
51,5 M16
M16 355355
258258 598598 708 708
200L 350
350 300
300 400
400 18.5
18.5 55 5555 m6
m6 110
110 1616 59 59 M20
M20 395395
307307 670670 780 780
225S 400
400 350
350 450
450 18.5
18.5 55 -- 6060 m6
m6 - - 140
140 - - 1818 - - 64 64 M20
M20 445445
327327- 700
- 700- - 840 840
225M 400
400 350
350 450
450 18.5
18.5 55 55
55 6060 m6
m6110
110 140
140 1616 1818 59 59 64 64 M20
M20 445445
327327
725725
725 725
835 835865 865
250M 500
500 450
450 550
550 18.5
18.5 55 60
60 6565 m6
m6140
140 140
140 1818 1818 64 64 69 69 M20
M20 494494
357357
785785
785 785
925 925925 925
280S 500
500 450
450 550
550 18.5
18.5 55 65
65 7575 m6
m6140
140 140
140 1818 2020 69 69 79,5
79,5 M20
M20 494494
397.5
397.5846846 986 986
280M 500
500 450
450 550
550 18.5
18.5 55 65
65 7575 m6
m6140
140 140
140 1818 2020 69 69 79,5
79,5 M20
M20 494494
397.5
397.5846846 986 986
315S 600
600 550
550 660
660 24
24 66 65
65 8080 m6
m6140
140 170
170 1818 2222 69 69 85 85 M20
M20 554554
504504
969969
969 969
11091109
11391139
315M 600
600 550
550 660
660 24
24 66 65
65 8080 m6
m6140
140 170
170 1818 2222 69 69 85 85 M20
M20 554554
504504
969969
969 969
11091109
11391139
315MX/LX
315MX/LX 600
600 550
550 660
660 24
24 66 65
65 8080 m6
m6140
140 170
170 1818 2222 69 69 85 85 M20
M20 623623
504504
10921122
10921122
12321232
12921292
315LY/LZ
315LY/LZ 600
600 550
550 660
660 24
24 66 65
65 8080 m6
m6140
140 170
170 1818 2222 69 69 85 85 M20
M20 623623
504504
10921122
10921122
12321232
12921292
355Ma 740
740 680
680 800
800 24
24 66 70
70 100
100m6
m6140
140 210
210 2020 2828 74.5
74.5106106M20
M20
M24
M24
698698
565565
12301270
12301270
13701370
14801480
355Mb 740
740 680
680 800
800 24
24 66 70
70 100
100m6
m6140
140 210
210 2020 2828 74.5
74.5106106M20
M20
M24
M24
698698
565565
12301270
12301270
13701370
14801480
355L 740
740 680
680 800
800 24
24 66 70
70 100
100m6
m6140
140 210
210 2020 2828 74.5
74.5106106M20
M20
M24
M24
698698
565565
13101350
13101350
14501450
15601560

INDUCTION MOTORS CATALOGUE

9
 THREE-PHASE SQUIRREL-CAGE INDUCTION MOTORS FOR HOISTING UNITS DRIVE
ASFM TYPE
The ASFM range of three-phase squirrel–cage induction motors with electromagnetic brakes are intended for hoisting
unit drive.
The motors are not designed to operate in potential explosive or chemically aggressive environments.

The ASFM motors are manufactured in the following construction types: IMB 3, IMB 35, IMB 5, IMV 1, IMV 5.
The normal degree of protection is IP 54 for the motor and IP 20 for the fan input. The motor insulation class is F. The
ASFM motor standard rated duty is S4 i.e. 120 switches/hour, DA 40%, inertia factor FI 2.

The brake is an independent, motor fastened subassembly, the whole assembly being an integrated construction.
The brake is electromagnetic, friction type.
ASFM motors could be equipped with DC or AC brakes. The brakes can be supplied from motor winding or from an
external voltage source (see table 5). Supply voltage of AC brakes (type AC) is 230 (220)V 50Hz in delta connection or
400V (380V) 50Hz in star connection (see figure 1). Brakes (220V DC or 230V DC) type EBM are supplied by the motor
phase rectified voltage (see figure 2). Brakes (24V DC) type FEA are supplied by the rectified voltage taken from motor
winding (see figure 3).

The brake coil ends are connected into the motor terminal box.
The ASFM motor specific parameters are given in the table - TECHNICAL PARAMETERS. The overall and mounting
dimensions are shown in the Table 6 and Table 7.

Figure 1 - Supply diagram of AC brake

star connection delta connection

Figure 2 - Supply diagram of EBM brake

INDUCTION MOTORS CATALOGUE

10
Figure 3 - Supply diagram of FEA brake

Table 5

Brake Supply
Frame Supply options
size Braking torque Voltage
Brake type
(Nm) (V) Motor voltage External source

80 FEA 1.6 16 24cc motor winding socket via rectifier Yes

90 FEA 2.5 25 24cc motor winding socket via rectifier Yes

230/400
100 AC5 35 motor terminals Yes
220/380
230/400
112 AC6 60 motor terminals Yes
220/380
EBM 10
132 100 205 cc motor terminals via rectifier Yes

230/400
160 AC8D 300 motor terminals Yes
220/380

INDUCTION MOTORS CATALOGUE

11
 Three-phase squirrel cage and induction motors with brake for hoisting units drive
type ASFM – TECHNICAL PARAMETERS

Rated power n Mp Ip K J MF Weight

Motor type cosI I
(kW) rpm Mn In % (kgm2) (Nm) [kg]
4 poli -4 poles
ASFM 80 a-4 0.63 1350 0.70 60 0.00712 16 23
ASFM 80 b-4 0.8 1350 0.71 63 0.00807 16 24
ASFM 80 c-4 1 1350 0.72 66 0.00892 16 25
ASFM 90 La-4 1.25 1350 0.73 69 0.0141 25 33
ASFM 90 Lb-4 1.6 1350 0.74 72 0.0162 25 34
ASFM 100 La-4 2 1400 0.75 74 0.0308 35 46
ASFM 100 Lb-4 2.5 1400 0.76 76 0.0402 35 48
2.5 6
ASFM 112 Ma-4 3.2 1410 0.77 78 0.0513 60 62
ASFM 112 Mb-4 4 1410 0.78 80 0.601 60 86
ASFM 132 Sa-4 5 1420 0.79 82 0.104 100 85
ASFM 132 Sb-4 6.3 1420 0.80 83 0.127 100 90
ASFM 132 Ma-4 8 1420 0.81 84 0.158 100 96
ASFM 160 M-4 10 1430 0.82 85 0.32 300 175
ASFM 160 M-4 16 1440 0.82 85 0.47 300 190
6 poli – 6 poles
ASFM 80 a-6 0.4 850 0.64 53 0.0137 16 23
ASFM 80 b-6 0.5 850 0.65 56 0.0145 16 24
ASFM 80 c-6 0.63 850 0.66 59 0.0171 16 25
ASFM 90 La-6 0.8 905 0.67 62 0.0245 25 33
ASFM 90 Lb-6 1 905 0.68 65 0.0271 25 34
ASFM 100 La-6 1.25 920 0.69 68 0.0426 35 46
ASFM 100 Lb-6 1.6 920 0.70 71 0.0495 35 48
2.0 6
ASFM 112 Ma-6 2 920 0.71 73 0.0623 60 60
ASFM 112 Mb-6 2.5 920 0.72 75 0.0714 60 64
ASFM 132 Sa-6 3.2 930 0.73 77 0.1276 100 62
ASFM 132 Sb-6 4 930 0.74 79 0.1691 100 90
ASFM 132 Ma-6 5 930 0.75 81 0.1985 100 96
ASFM 160 M-6 8 940 0.76 82 0.495 300 175
ASFM 160M-6 10 940 0.78 82 0.495 300 175
8 poli -8 poles
ASFM 80 a-8 0.32 650 0.60 49 0.0137 16 23
ASFM 80 b-8 0.4 650 0.61 52 0.0145 16 24
ASFM 80 c-8 0.5 650 0.62 55 0.0171 16 25
ASFM 90 La-8 0.63 650 0.63 58 0.0245 25 33
ASFM 90 Lb-8 0.8 650 0.64 61 0.0271 25 34
ASFM 100 La-8 1 650 0.65 64 0.0426 35 45
ASFM 100 Lb-8 1.25 650 0.66 67 0.0495 35 47
ASFM 112 Ma-8 1.6 660 0.67 70 0.0623 60 60
ASFM 112 Mb-8 2 660 0.68 72 0.0714 60 63
2.0 6
ASFM 132 Sa-8 2.5 690 0.69 74 0.1276 100 89
ASFM 132 Sb-8 3.2 690 0.70 76 0.1691 100 90
ASFM 132 Ma-8 4 690 0.71 78 0.1985 100 96
ASFM 160 M-8 8 700 0.72 79 0.495 300 175

INDUCTION MOTORS CATALOGUE

12
 ASFM – series induction motors

Table 6

Foot mounting Shaft extension

HD
Frame size H D F AB L
A B C K E GA d +2
Nom Tol Nom Tol Nom Tol
ASFM 80 125 100 50 80 10 19 40 6 21.5 M6 160 205 396

ASFM 90L 140 125 56 90 10 24 50 8 27 M8 180 222 452

j6
ASFM 100L 160 140 63 100 12 28 60 8 31 M8 200 248 468

ASFM 112M 190 140 70 112 -0,5 12 28 60 8 h9 31 M8 224 269 549

ASFM 132S 216 140 89 132 12 38 80 10 41 M10 264 345 598

ASFM 132L 216 178 89 132 12 38 k6 80 10 41 M10 264 345 645

ASFM 160M 254 210 108 160 14.5 42 110 12 45 M12 320 399 810

INDUCTION MOTORS CATALOGUE

13
 ASFM - series induction motors

Table 6

Flange mounting Shaft extension

HD1
Frame size D F LB L
+2
M Nj6 P S T E GA d
Nom Tol Nom Tol
ASFM 80 165 130 200 12 3.5 19 40 6 21.5 M6 125 356 396
ASFM 90L 165 130 200 12 3.5 24 50 8 27 M8 132 402 452
j6
ASFM 100L 215 180 250 14.5 4 28 60 8 31 M8 148 408 468
ASFM 112M 215 180 250 14.5 4 28 60 8 h9 31 M8 157 489 549
ASFM 132S 265 230 300 14.5 4 38 80 10 41 M10 213 518 598
ASFM 132L 265 230 300 14.5 4 38 k6 80 10 41 M10 213 565 645
ASFM 160M 300 250 350 18.5 5 42 110 12 45 M12 239 700 810

INDUCTION MOTORS CATALOGUE

14
AIM SERIES OF THREE – PHASE WOUND ROTOR INDUCTION MOTORS FOR HOISTING UNITS DRIVE
AIFM SERIES OF THREE-PHASE WOUND ROTOR ELECTROMAGNETIC BRAKE INDUCTION MOTORS
FOR HOISTING UNITS DRIVE
The AIM series of three-phase induction motors with wound rotor and brushes in permanent contact with the rings and AIFM
series, derived from the first one, equipped with an electromagnetic brake are meant for hoisting units drive.

The motors comply with the requirements of the following standards and norms:
- EN 60034-1:2004 – Rotating electrical machines. Part 1: Rating and performance.
- SR 1893:2008 - Rotating electrical machines. Rules and methods for quality control.
-STAS 1893/3-87 - Rotating electrical machines. Marking, packing, supply, documents, guarantees.
- EN 60034-6:1993 - Rotating electrical machines -- Part 6: Methods of cooling (IC Code).
- EN 60034-7:1996/A1:2001 - Rotating electrical machines. Part 7: Classification of types of construction, mounting
arrangements and terminal box position (IM Code).
- EN 60034-9:2005 - Rotating electrical machines -- Part 9: Noise limits.
- EN 60034-14:2004/A1:2007 - Rotating electrical machines -- Part 14: Mechanical vibration of certain machines with shaft
heights 56 mm and higher - Measurement, evaluation and limits of vibration severity.
- EN 60529:1995/A1:2003 - Degrees of protection provided by enclosures (IP code).
- CEI 60072-1:1994 - Dimensions and ouput series for rotating electrical machines. Part 1: Frame numbers 56 to 400 and
flange numbers 55 to 1080.
- STAS 6968/1-87 - Wound-rotor induction motors for hoisting and transport installations. Special technical requirements.
- STAS 6968/2-88 - Ring asynchronous motors for hoisting an transport installation. Correlation of output powers with
mounting dimensions.

The motors are intended to operate under the following environmental conditions:
-Temperature - 330 C....... + 400 C
0
-Relative humidity: max. 80% la 20 C
-Maximum altitude of installation: 1000 m (3000 feet) above sea level.
The motors are solid grey -cast iron mechanical construction; the housing is fitted with cooling fins and is blown by an outer
fan placed at the non-drive end side, protected by a fan cover.
The motors are provided with rolling-contact bearings.
The bearing types, appropriate to each frame size motors are given in table 1.

Table 1
Bearing symbol
Frame size AIM AIFM Brush dimensions
Drive-end Non drive-end Drive-end Non drive-end
100 6306 P6 EL 6306 P6 EL 6306 P6 EL 6306 P6 EL 16 x 8
112 6307 2Z P63 EL 6307 2Z P63 EL 6307 2Z P63 EL 6307 2Z P63 EL 16 x 8
132 6308 2Z P63 EL 6308 2Z P63 EL 6308 2Z P63 EL 6308 2Z P63 EL 20 x 10
160 6310 2Z P63 EL 6310 2Z P63 EL 6310 2Z P63 EL 6310 2Z P63 EL 25 x 12.5
180 6311 2Z P63 EL 6311 2Z P63 EL 6311 2Z P63 EL 6311 2Z P63 EL 25 x 12.5
200 6312 P6 6312 P6 - - 32 x 16
225 6313 P6 6313 P6 - - 32 x 16
250 NU 315 P6 6315 P6 - - 40 x 20
280 NU 317 P6 6317 P6 - - 40 x 20

The bearings are not dimensioned to stand axial forces outside the motors. The stator and rotor common terminal box,
located on top the motor, is provided with cable entries on both sides and normalized glands. The terminal box allows for the
inspection of the slip rings and brushes. The brush dimensions are given in table 1.
A six-terminal plate allowing the stator winding star or delta connection is fitted inside the terminal box. AIFM motors have an
additional terminal plate for brake supply. The rotor cables are connected to the terminals on the brush holder.
The housings are provided with earthing terminals.
The protection degree of the AIFM type motors is:
- IP 55 for frame sizes 100 -180
The protection degree of the AIM type motors is:
- IP 55 for frame sizes 112 -180, 250, 280
- IP 54 for the other frame sizes
The usual mounting arrangements, according to EN 60034-7 (IEC 34-7) are: IM1001, IM2001, IM3001, IM1011 and IM3011.
The AIM series are also available in IM1002 mounting arrangement.
The stator and rotor windings are manufactured in class F of insulation. The motors are designed to be supplied from a three -
phase mains with line voltage of 220V, 230V, 380V, 400 V at 50 Hz frequency. They may be as well manufactured as to meet
other intermediate voltages and the 60 Hz frequency.

INDUCTION MOTORS CATALOGUE

15
 The supply source could be motor winding or a separate source. The brakes type AC can to be supplied at 230V (respectivly
220V) 50 Hz when they are delta connected or at 400V (380 V) 50Hz when they are star connected (see figure 1). The brakes
type EBM are supplied with rectified voltage from motor winding (220V or 230V) – see figure 2. The brake supply voltage is
given in table 4.
A starting rheostat, inserted in the rotor circuit, setting up the starting time at 6-7 sec., enables the starting of the motors.
The motors manufacturer does not supply the starting rheostat.
The AIM and AIFM motors are designed to operate under an intermittent periodic duty S3, characterized by six starts per hour
and an operating factor of 40%.
Table 5 includes the technical parameters corresponding to other rated duties ( S1, S2, S4 ).
The rated output refers to rated duty and the standard environmental conditions.
For environmental conditions different from the temperate climate standard values, the output varies as shown in tables 2a
and 2b.
Table 2a Table 2b
Ambient temperature
Height [m] 0-1000 1001-2000 2001-3000 3001-4000 40 50 60
[0C]
Effective power Effective power
100 94 86 77 100 90 80
[%P] [%P]

According to EN 60034-1:2005 (IEC 34-1) the technical parameters are subject to the following tolerances table3.

Table 3
Parameter name Tolerances
Efficiency
- power lower than or equal to 50kW - 15% din (1 - Ș)
- power higher than 50kW - 10% din (1 - Ș)
1
Power factor (cos M) 6 of (1 – cos M), min 0,02 and max 0,07
Slip (at full load and operating temperature) +/- 20% of the slip guaranteed value
- 10% of the torque guaranteed value, with the specification
Maximum torque that after applying this tolerance, the torque should remain
equal or higher than 1,6 or 1,5 times the nominal torque
Moment of inertia + / - 10% of the guaranteed value

The vibration levels, in mm/s comply with EN 60034-14:2004/A1:2008. The maximum permissible values of the motors
noise levels, expressed by the sound power are in accordance to EN 60034-9:2006 (IEC 34-9).

Figure 1 – Supply diagram of AC brake

star connection delta connection

Table 4
Figure 2 – Supply diagram of EBM brake
Supply
Brake
Frame
Braking Supply options
size Brake Voltage
torque Motor External
type (V)
(Nm) voltage source
230/400 motor
100 AC5 35 Yes
220/380 terminals
230/400 motor
112 AC6 60 Yes
220/380 terminals
motor
EBM
132 100 205 cc terminals via Yes
10
rectifier
230/400 motor
160 AC8D 300 Yes
220/380 terminals

INDUCTION MOTORS CATALOGUE

16
Table 5
Name Rated duty S3 – 6con/h -DA = 40% Equivalent services (kW)
GD2 Weight Mf
Efficiency I1 (380V) S1 S2 S3 S4 - FI =2
Mmax/Mn
P n cosij I2 U2 60Min con/h
AIM AIFM AIM AIFM AIM AIFM AIM AIFM AIFM
Type Size 6 150 300
kW rpm % A A V kgfm2 kg Nm DA (%)
25 60 100 25 40 60 40 60
kW
4 poles Synchronous speed 1500 rot/min
AIM AIFM 100La-4 2 1310 0.65 68 68 7 7 18 110 2.9 0.14 0.184 42 55 35 1.6 1.8 2.2 1.7 1.6 1.9 1.7 1.6 1.5 1.3
AIM AIFM 100Lb-4 2.5 1340 0.68 69 69 8.1 8.1 20 115 2.7 0.16 0.2 46 59 35 2 2.2 2.7 2.1 2 2.4 2.1 2 1.9 1.6
AIM AIFM 112Ma-4 3.2 1340 0.67 71.5 71.5 10 10 22 120 2.6 0.18 0.2 56 69 60 2.5 2.9 3.5 2.7 2.5 3 2.7 2.5 2.4 2.1
AIM AIFM 112Mb-4 4 1350 0.7 77 77 11.3 11.3 24 130 3 0.2 0.22 61 74 60 3.2 3.6 4.4 3.4 3.2 3.8 3.4 3.2 3 2.6
AIM AIFM 132Sa-4 5 1350 0.73 74 74 14 14 28 145 3.2 0.22 0.24 90 115 100 4 4.5 5.5 4.2 4 4.8 4.2 4 3.7 3.2
AIM AIFM 132Ma-4 6.3 1390 0.73 76.5 76.5 17.2 17.2 30 160 2.8 0.25 0.27 100 135 100 5 5.6 6.9 5.4 5 6 5.4 5 4.7 4.1
AIM AIFM 132Mb-4 8 1400 0.74 82.5 82.5 20 20 36 170 3.6 0.3 0.32 125 140 100 6.3 7.2 8.8 6.8 6.3 7.6 6.8 6.3 6 5.2
AIM AIFM 160M-4 10 1400 0.78 83 83 23.5 23.5 36 180 3.8 0.55 0.6 170 200 300 7.5 8.7 11 8.5 7.5 9.5 8.5 7.5 7.5 6.5
AIM AIFM 160L-4 15 1420 0.76 84 84 35.7 35.7 38 260 3.2 0.65 0.7 190 220 300 11 13 16.5 12.5 11 14 12.5 11 10.5 9.5
AIM AIFM 180L-4 20 1420 0.82 86 86 43.1 43.1 48 270 3 1 1.15 215 245 300 15 18 22 17 15 19 17 15 14.5 13
AIM - 200La-4 24 1420 0.87 89 47.2 67 230 3.2 1.6 350 18.5 22.5 28 21 18.5 23 21 18.5 18 16
AIM - 200L-4 25 1440 0.88 89 - 48.5 - 72 230 3.2 1.6 - 367 - - 18.5 22.5 28 21 18.5 23 21 19 18 16
AIM - 200Lb-4 28 1420 0.87 89 55 80 275 3.0 1.75 367 22 27 33 25 22 27 25 22 21 19
AIM - 225Ma-4 32 1440 0.88 89 - 62 - 77 275 2.8 2.5 - 375 - - 22 29 37 27 22 30 26 22 23 20
AIM - 225Mb-4 39 1440 0.87 90.5 - 76 - 78 330 2.9 3.2 - 388 - - 30 37 45 34 30 37 33 30 28 25
AIM - 250M-4U 48 1460 0.79 88 - 105 - 160 195 3 4.5 - 540 - - 37 46 55 42 37 46 41 37 35 31
AIM - 250M-4V 58 1460 0.73 88 - 137 - 162 235 4 5.5 - 582 - - 45 56 67 51 45 56 50 45 42 38
AIM - 280S-4 75 1470 0.88 92 - 141 - 160 280 2.5 9.7 - 700 - - 55 67 85 62 55 67 60 52 50 45
AIM - 280M-4 85 1470 0.9 92 - 158 - 170 300 2.6 11 - 760 - - 64 75 95 70 64 75 70 60 56 50
6 poles Synchronous speed 1000 rpm
AIM AIFM 100La-6 1.25 880 0.68 67 67 4.1 4.1 13 80 2.7 0.18 0.21 42 55 35 1 1.1 1.4 1.1 1 1.2 1.1 1 0.9 0.7
AIM AIFM 100Lb-6 1.6 880 0.7 72 72 4.8 4.8 15 85 2.6 0.2 0.22 46 59 35 1.2 1.4 1.8 1.3 1.2 1.5 1.3 1.2 1.1 0.9
AIM AIFM 112Ma-6 2 880 0.72 75 75 5.7 5.7 19 95 2.7 0.23 0.24 56 69 60 1.6 1.8 2.2 1.7 1.6 1.9 1.7 1.6 1.5 1.3
AIM AIFM 112Mb-6 2.5 880 0.67 70.4 70.4 8 8 19 105 3.5 0.25 0.27 61 74 60 2 2.2 2.7 2.1 2 2.4 2.1 2 1.9 1.6
AIM AIFM 132Sa-6 3.2 900 0.7 71 71 9.8 9.8 20 110 2.8 0.28 0.3 90 115 100 2.5 2.9 3.5 2.7 2.5 3 2.7 2.5 2.4 2.1
AIM AIFM 132Ma-6 4 900 0.7 77 77 11.2 11.2 26 115 2.8 0.3 0.32 100 135 100 3.2 3.6 4.4 3.4 3.2 3.8 3.4 3.2 3 2.6
AIM AIFM 132Mb-6 5 900 0.73 76 76 13.7 13.7 27 120 2.7 0.33 0.35 125 140 100 4 4.5 5.5 4.2 4 4.8 4.2 4 3.7 3.2
AIM AIFM 160M-6 7.5 920 0.76 79 79 18 18 27 180 2.6 0.6 0.65 170 200 300 5.5 6.5 8 6 5.5 7 6 5.5 5.5 5
AIM AIFM 160L-6 10 920 0.79 83 83 23.2 23.2 25 260 2.6 0.8 0.9 190 220 300 7.5 9 11.5 8.5 7.5 9.5 8.5 7.5 7 6.5
AIM AIFM 180L-6 15 930 0.8 86 86 35.3 35.3 45 230 3 1.3 1.4 215 245 300 11 13 16.5 12.5 11 14 12.5 11 10.5 9.5
AIM - 200L-6 20 950 0.83 86.4 - 42.6 - 51 255 3.8 1.7 2 356 - - 15 18 23 17.5 15 19 17 15 14 13
AIM - 225Ma-6 25 950 0.87 89.5 - 49 - 63 250 2.4 3.4 - 368 - - 18.5 23 28 22 18.5 23 21 18.5 18 16
AIM - 225Mb-6 30 950 0.87 89 - 59 - 68 290 2.7 3.7 - 380 - - 22 27 34 26 22 28 25 22 21 19
AIM - 250M-6U 37 970 0.82 88 - 78 - 175 140 3.9 5.1 - 545 - - 27 34 42 32 27 34 30 27 26 23
AIM - 250M-6V 45 970 0.78 85 - 103 - 168 175 3.2 7 - 595 - - 34 43 52 39 34 43 38 34 32 29

17
AIM - 280S-6 60 970 0.77 89 - 133 - 206 190 2.8 11 - 700 - - 45 57 70 52 45 57 50 45 43 38
AIM - 280M-6 75 970 0.81 89.4 - 157.5 - 210 235 2.8 14 - 760 - - 55 70 85 64 55 70 62 55 52 47
 Name Rated duty S3 – 6con/h -DA = 40% Equivalent services (kW)
GD2 Weight Mf
Efficiency I1 (380V) S1 S2 S3 S4 - FI =2
Mmax/Mn
P n cosij I2 U2 60Min con/h
AIM AIFM AIM AIFM AIM AIFM AIM AIFM AIFM
Type Size 6 150 300
2
kW rpm % A A V kgfm kg Nm DA (%)
25 60 100 25 40 60 40 60
8 poles Synchronous speed 750 rpm
AIM AIFM 132Sb-8 2.5 660 0.65 68 68 8.6 8.6 18 100 2.8 0.28 0.3 90 115 100 1.6 2.2 2.8 2.2 1.6 2.3 2.1 1.6 1.6 1.5

AIM AIFM 132Ma-8 3.2 665 0.63 72 72 10.7 10.7 21 115 2.6 0.3 0.32 100 135 100 2.2 2.9 3.6 2.8 2.2 3 2.7 2.2 2.2 2.1

AIM AIFM 132Mb-8 4 670 0.65 73 73 12.8 12.8 26 135 3.1 0.33 0.35 125 140 100 3 3.6 4.5 3.5 3 3.7 3.4 3 2.8 2.6

AIM AIFM 160M-8 5.5 700 0.68 82 82 15 15 26 160 2.35 0.6 0.65 170 200 300 4 5 6.3 4.7 4 5.1 4.5 4 3.9 3.6

AIM AIFM 160L-8 7.5 700 0.69 81 81 20.4 20.4 28 195 2.35 0.8 0.9 190 220 300 5.5 6.7 8.6 6.4 5.5 7 6.1 5.5 5.3 4.9

AIM AIFM 180L-8 10 700 0.64 83 83 28.6 28.6 31 210 2.25 1.3 1.4 215 245 300 7.5 9 11.5 8.5 7.5 9.5 8.5 7.5 7 6.5

AIM - 200L-8 15 710 0.67 83 - 41 - 39 250 2.26 1.6 - 348 - - 11 13.5 16.5 12.5 11 14 12 11 10.5 9.5

AIM - 225Ma-8 20 710 0.75 88 - 46 - 59 220 2.5 3.8 - 355 - - 15 18.5 23 17.5 15 19 16.5 15 14.5 13

AIM - 225Mb-8 25 710 0.7 87 - 62.4 - 61 270 2.58 4.4 - 368 - - 18.5 23 28 22 18.5 23 20 18.5 17.5 16

AIM - 250M-8U 30 720 0.81 84 - 67 - 132 150 3.2 6.4 - 540 - - 22 27.5 34 26 22 28 24 22 21 19

AIM - 250M-8V 37 720 0.75 85 - 88.3 - 129 190 3 7.5 - 590 - - 27 33 42 32 27 34 30 27 26 24

AIM - 280S-8 50 720 0.8 90 - 106 - 163 200 3.1 11.5 - 710 - - 37 46 57 44 37 47 41 37 35 32

AIM - 280M-8 63 720 0.77 87 - 143 - 166 250 3.1 14 - 780 - - 47 59 73 55 47 60 52 47 45 41

10 poles Synchronous speed 600 rpm

AIM - 200L-10 11.5 570 0.56 83 37.6 50 150 2.5 1.6 348 7.5 11 12.5 10 7.5 11 10 8.5 7.5 6

AIM - 250M-10V 23 570 0.56 83.8 - 74.5 - 121 125 3.3 5.8 - 486 - - 16.5 20.5 26 20 16.5 21 18.5 16.5 16 14

AIM - 250M-10W 28 570 0.63 86 - 79 - 124 150 2.8 7.5 - 611 - - 20 25 32 24 20 25 22 20 19 17

AIM - 280S-10 37 570 0.68 87.5 - 94.6 - 153 160 2.8 11.5 - 720 - - 27 34 42 32 27 34 30 27 26 23

AIM - 280M-10 48 570 0.66 85.7 - 129 - 162 195 2.3 14 - 780 - - 35 44 55 42 35 45 40 35 34 30
SLIP RING THREE-PHASE INDUCTION MOTORS FOR HOISTING UNITS DRIVE TYPE AIM, AIFM

IM 1001

L
Frame size A B C H K D E F GA d AA AB BB HD
AIM AIFM

100L 160 140 63 100 12 28 60 8 31 M10 36 200 280 245 485 620

112M 190 140 70 112 12 28 60 8 31 M10 40 224 290 267 535 655

132S 216 140 89 132 12 38 80 10 41 M12 59 264 285 312 596 725

132M 216 178 89 132 12 38 80 10 41 M12 59 264 330 312 634 763

160M 254 210 108 160 14.5 42 110 12 45 M16 70 320 400 378 776 925

160L 254 254 108 160 14.5 42 110 12 45 M16 70 320 400 378 776 925

180L 279 279 121 180 14.5 48 110 14 51.5 M16 73 360 400 412 840 970

200L 318 305 133 200 18.5 55 110 16 59 M20 83 400 450 460 905 -

225M 356 311 149 225 18.5 60 140 18 64 M20 92 450 500 510 1015 -

250M 406 349 168 250 24 70 140 20 74.5 M20 140 500 570 571 1201 -

280S 457 368 190 280 24 80 170 22 85 M20 140 560 658 625 1315 -

280M 457 419 190 280 24 80 170 22 85 M20 140 560 658 625 1315 -

INDUCTION MOTORS CATALOGUE

19
 SLIP RING THREE-PHASE INDUCTION MOTORS FOR HOISTING UNITS DRIVE TYPE AIM, AIFM

IM 3001

L
Frame size M N P S T D E F GA d HD1
AIM AIFM

100L 215 180 250 14.5 4 28 60 8 31 M10 145 485 620

112M 215 180 250 14.5 4 28 60 8 31 M10 155 535 655

132S 265 230 300 14.5 4 38 80 10 41 M12 180 596 725

132M 265 230 300 14.5 4 38 80 10 41 M12 180 634 763

160M 300 250 350 18.5 5 42 110 12 45 M16 218 776 925

160L 300 250 350 18.5 5 42 110 12 45 M16 218 776 925

180L 300 250 350 18.5 5 48 110 14 51.5 M16 232 840 970

200L 350 300 400 18.5 5 55 110 16 59 M20 260 905 -

225M 400 350 450 18.5 5 60 140 18 64 M20 285 1015 -

250M 500 450 500

550 18.5 5 70 140 20 74.5 M20 321 1201 -

280S 500 450 550 18.5 5 80 170 22 85 M20 345 1315 -

280M 500 450 550 18.5 5 80 170 22 85 M20 345 1315 -

We reserve the right to implement modifications without notice.

INDUCTION MOTORS CATALOGUE

20