Scribd
Upload
67 views2 pages

Assessment

This document provides instructions for configuring a router and network connections. It lists cable colors for a 568 pin connector and how cables should be run. It then provides steps to reset the router by pressing the reset button with a pencil. Further instructions describe checking network adapter settings on a server to confirm the router is not already configured and steps to open the router configuration page by entering the default gateway IP, set the WiFi network name and password, configure the WAN IP address and DNS servers, and update the LAN IP address of the router. It finishes with directions for setting the starting IP pool address for the DHCP server.

Uploaded by

claire juarez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
67 views2 pages

Assessment

This document provides instructions for configuring a router and network connections. It lists cable colors for a 568 pin connector and how cables should be run. It then provides steps to reset the router by pressing the reset button with a pencil. Further instructions describe checking network adapter settings on a server to confirm the router is not already configured and steps to open the router configuration page by entering the default gateway IP, set the WiFi network name and password, configure the WAN IP address and DNS servers, and update the LAN IP address of the router. It finishes with directions for setting the starting IP pool address for the DHCP server.

Uploaded by

claire juarez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

568 pin

1 – white orange
2 – orange
3 – white green
4 – blue
5 – white blue
6 – green
7 – white brown
8 – brown

1 straight thru – in the patch to switch #2


1 straight thru – in the patch to switch #3
1 straight thru – modular at the back to the computer
1 straight thru – to the rack #17
1 cable to the server – from the back of the table
1 cable to the client – from the back of the table

ROUTER CONFIGURATION
- Reset the router
- Press the reset button using pencil or anything that can press the reset button

SERVER
1. Click the internet network to check the details of the network
go to the local area connection and click disable/enable the network device
right click the LAN connection and click Status
select details and check if the IPv4 address is 192.168.1.1 fro the IPv4 default gateway IPv DHCP
server
this is an indicator that the router was not configured
go back and configure the router again or reset it

ROUTER CONFIGURATION
1. Open google chrome and type the default gateway 192.168.1.1 – log the IP of the router
2. If successful USER NAME: admin password: 1234
3. Click English and open
4. Click the + symbol of the network
5. Change the SSID
WLAN SET UP
SSId: JUAREZ
Security mode WPA2_PSK
Preshared key: 1234567890

WAN
Fixed IP Address:
Ip address:192.168.168.31
IP subnet mask:255.255.255.0
Gateway: 192.168.168.1

DNS SERVER
First DNS Server: 192.168.168.1
Second DNS:8.8.8.8

- Click apply

LAN CONFIGURATION IN THE ROUTER


IP – 192.168.1.1
-click apply
Note: if it is successful the computer will restart/ reboot
2. Check the network and sharing of the IP was changed.

DHCP ROUTER CONFIGURATION


DHCP Set up
IP Pool starting address: 192.168.1.100

You might also like