Hand chain

hoist
Yalelift
360
Hand chain hoist
model Yalelift 360
Capacities 500 - 20.000 kg
Areas of operation as well as operator conditions
have been improved in trail-blazing fashion, which
goes far beyond the classical hand chain hoist.

• The revolutionary 360° rotating hand chain guide

allows the operator to work from virtually any
position, in confined spaces or above the load.
The Yalelift can even be operated from the side of
the load which also makes it possible to use the
hoist for horizontal pulling or tensioning. Due to
the additional flexibility, the operator is no longer
forced to work in the danger zone near the load.
• The new patented brake system is extremely
quiet and guarantees operational safety and
improved serviceability due to omission of the
vulnerable ratchet pawls.
All parts are made of high quality materials,
additionally galvanised or yellow-chromated to
increase corrosion prevention.
• The enclosed robust stamped steel housing
protects all internal components even in the
toughest conditions.
• The hardened load sheave with four precision
machined pockets ensures accurate movement
of the load chain.
• The extremely low headroom allows maximum
use of the lifting height.

Optional extras
• All models can be equipped with an overload
prevention device.
• Chain container, special sizes upon request
Chain guide The patented High quality encapsu-
Yale brake system lated ball bearings • Corrosion and acid resistant load and hand
low noise and reduced wear. and sliding bushes chains
for smooth and effortless
operation.

18
 Hand chain
hoist
Towerlift
ES
Hand chain hoist
model Towerlift
Capacities 1.000 - 2.000 kg
The Towerlift is the inverted version of the
Yalelift 360 and specifically designed for
operation on traversing tower systems.

• The unit is provided with a special chain guide

and a totally enclosed housing.
• The basic version of the Towerlift offers
capacities of 1.000 kg and 2.000 kg.
• Black powder coat finish as standard.

For applications that require additional

corrosion prevention e.g. food processing,
dairies, sewage treatment etc.
see page 22-23

Hand chain hoist

Towerlift ES
Capacity 1.000 kg
The Towerlift ES is a further development of
the Towerlift. Like the Towerlift the model ES
is provided with a chain reeving system
The robust stamped The precisely specifically designed for the stage/entertain-
steel housing machined load sheave
ment industry. This allows operation in
with four stay bolts is resistant ensures accurate movement
to the toughest working of the load chain. standard hoist configuration as well as in
conditions. inverted mode.

• The hoist comes with revolving chain

container which can be fully used in
standard hoist configuration as well as in
inverted mode.
• Black powder coat finish.

19
Hand chain
hoist Hand chain hoist
with integrated
Yalelift IT push type trolley
model Yalelift ITP
Capacities 500 - 5.000 kg

Hand chain hoist

with integrated
geared type trolley
model Yalelift ITG
Capacities 500 - 5.000 kg
The combination of the Yalelift 360 with a low
headroom manual trolley provides even more
flexibility in the application of the Yalelift 360.

• All units of this series up to a capacity of

3.000 kg are provided with single chain fall and
the min. headroom (Dim. A) has been further
reduced. Ideal for applications with low ceilings
and limited headroom.
• The manual trolleys are adjustable to fit a wide
range of beam profiles (e.g. INP, IPE, IPB).
Depending on the beam flange width an adjust-
Illustrated rubber buffers ment up to 300 mm can be made easily.
optionally available!
• The trolley wheels are designed for a max. beam
profile incline of 14 % (DIN 1025 - part 1),
excellent rolling features are guaranteed by pre-
lubricated, encapsulated ball bearings.
• Anti-tilt and anti-drop devices are standard.
• A subsequent conversion of a Yalelift 360 into a
Yalelift IT with integrated trolley is easily possible
at any time.

Optional equipment and accessories

are given on pages 22 and 23!

20
 Hand chain
Hand chain hoist hoist
with integrated push type trolley
(Low headroom) Yalelift LH
model Yalelift LHP
Capacities 500 - 10.000 kg

Hand chain hoist

with integrated geared type
trolley (Low headroom)
model Yalelift LHG
Capacities 500 - 10.000 kg
The hand chain hoist Model Yalelift LH with
integrated low headroom manual trolley is the
consequent further development of the Yalelift IT.
Wherever an even smaller headroom is essential,

with y
the Yalelift LH is the ideal choice.

• The specially developed chain reeving system

and chain guide allow the bottom block to be
t r e m el
pulled laterally to the hoist even further up and ex w
almost against the beam flange. lo m
• The integrated design of the innovative Yalelift LH
a dr oo
uses the same manual trolleys as incorporated in
the Yalelift IT series. he
• All models of the LH series up to 3.000 kg
capacity are provided with single chain fall.
• The proven and almost stepless adjustment
system allows quick and easy assembly of the
trolley.
• The low headroom version of the Yalelift IT is
adjustable to fit a wide range of beam profiles
(e.g. INP, IPE, IPB). Illustrated rubber buffers
• The trolley wheels are designed for a max. beam and chain container
optionally available!
profile incline of 14 % (DIN 1025 - Part 1).
• Excellent rolling features due to machined steel
wheels mounted on pre-lubricated, encapsulated
ball bearings.
• Anti-tilt and anti-drop devices as standard.
• The trolleys are offered for two beam ranges.
Range A for a flange width up to 180 mm is
standard and covers approx. 80 % of all require-
ments. Conversion to range B for beam width up
to 300 mm can be easily accomplished.
• A subsequent conversion of a Yalelift 360 into a
Yalelift LH with integrated trolley is also easily
possible.

21
Corrosion
resistance CR Corrosion resistance CR
Accessories Added lifetime
All models of the Yalelift Vario programme can be
supplied with corrosion resistant features which
include zinc-plated load chains and stainless steel
hand chain as standard.

Corrosion protection
Corrosion starts on the surface of components due
to reaction of environmental influences. This affects
the mechanical properties of the components, e.g.
breaking strength and total ultimate elongation.
Many components are supplied in black (unma-
chined), bright (machined) or painted condition.
This offers certain protection but after only a short
period of time corrosion can begin.

With the application of a protective coating, the

development of corrosion can be reduced and
delayed, thus extending the service life of the
treated components.

Applications for corrosion resistant units

and zinc-plated resp. stainless steel load
chains
Completely corrosion resistant units with either
zinc-plated or stainless steel load chains should be
used in all conditions with increased requirements
towards corrosion protection.
Typical applications are in food processing
Illustrated rubber buffers
optionally available! (e.g. dairy, abattoir, etc.), chemical industries
(e.g. paper, dye industries), farming and sewage
treatment.

i l a b le
i t s a va tant
n s
All u osion resi
r
in cor version!

22
Spark resistant features Overload protection
Added safety Added control
All models of the Yalelift Vario programme can be The overload protection device of the Yalelift Vario
provided with the following optional features for programme reliably prevents excessive load take-up
additional protection against sparking: of the hoist during operation. When reaching the
pre-set overload value, the unit will jam and stop
• Load and hand chains from stainless steel operation in the lifting direction. Lowering of the
• Units completely corrosion resistant load is still possible at any time.
• Bronze-plated suspension and load hooks The overload protection device provides additional
safety with regard to possible false estimation of the
• Solid bronze trolley wheels
load weight and thus increases the lifetime of the
• Rubber buffers hoist. The new design principle allows excellent
• Chain containers adjustability and response.

Solid bronze trolley Bronze-plated

wheels suspension and load
hooks

Spark resistance Beam locking device

In nearly all industrial areas, and not only in the
Added security
chemical industry, plants are operated in explosion
endangered environments. Because of the great Yale trolleys can be optionally provided with beam
damage an explosion could cause to people and locking device to secure the unloaded trolley in fixed
material, stringent legal and technical requirements position on the beam (park position e.g. on ships).
are imposed, particularly on electrical equipment
used in explosion endangered environments.

Applications
Paint factories, paint shops, foundries, on-/ Chain container
offshore, refineries, oil depots, electro-plating,
automobile factories, on ships and docks, printers, Added comfort
textile and paper factories, food industries, glass The chain containers for the Yalelift Vario
and ceramic industries, wood working industries programme consist of a robust, powder-coated
and hardening shops, etc. steel frame with a flexible chain bag made
from high tensile Cordura textile fabric.
Available in different sizes. Special sizes
on request.

23
Hand chain
hoist
Yalelift
360

Capacity Chain Hand chain Pull on hand Net weight

in kg/ dimensions overhaul for chain at WLL at std. lift
Number of 1 m lift (3 m)
Model chain falls d x p in mm m daN kg

Yalelift 360 500/1 5 x 15 30 21 9

1000/1 6 x 18 49 30 13
2000/1 8 x 24 71 32 20
3000/1 10 x 30 87 38 29
5000/2 10 x 30 174 34 38
10000/3 10 x 30 261 44 71
20000/6 10 x 30 522 2 x 44 196

Towerlift 1000/1 6 x 18 49 30 14
2000/1 8 x 24 71 32 21

Towerlift ES 1000/1 6 x 18 49 30 15

Model Capacity Beam Beam flange Beam flange Min. Net weight in kg for 3 m lift
in kg/ range width b thickness t radius curve with
Number of max. locking device
chain falls mm mm m -P -G -P -G

Yalelift IT 500/1 A 50 - 180 19 0,90 20 24 26 31

500/1 B 180 - 300 19 0,90 21 25 27 32
1000/1 A 50 - 180 19 0,90 27 32 35 40
1000/1 B 180 - 300 19 0,90 29 33 37 41
2000/1 A 58 - 180 19 1,15 44 49 52 57
2000/1 B 180 - 300 19 1,15 46 50 54 58
3000/1 A 74 - 180 27 1,40 77 82 86 91
3000/1 B 180 - 300 27 1,40 79 84 88 93
5000/2 A 98 - 180 27 1,80 125 130 135 140
5000/2 B 180 - 300 27 1,80 129 134 139 144

Yalelift LH 500/1 A 60 - 180 19 0,90 27 31 33 38

500/1 B 180 - 300 19 0,90 27 32 34 38
1000/1 A 70 - 180 19 0,90 35 40 43 48
1000/1 B 180 - 300 19 0,90 36 41 44 49
2000/1 A 82 - 180 19 1,15 61 65 69 73
2000/1 B 180 - 300 19 1,15 62 67 70 75
3000/1 A 100 - 180 19 1,40 107 112 116 121
3000/1 B 180 - 300 19 1,40 109 114 118 123
5000/2 A 110 - 180 27 1,80 152 157 162 167
5000/2 B 180 - 300 27 1,80 156 161 166 171
10000/3 B 125 - 310 40 1,80 on request

24
The Vario programme
Always different. Always with Yalelift 360.

Yalelift 360 for operation from all positions ✓

Towerlift for application on traversing tower systems ✓
Towerlift ES for operation in standard or inverted mode ✓
Yalelift IT with integrated manual trolley ✓
Yalelift LH to meet extremely low headroom requirements ✓
Optional:
CR corrosion resistant version of all models ✓
Accessories
• Spark resistant features ✓
• Overload protection✓
• Beam locking device ✓

• Chain containers ✓

25
 Yalelift ITP/G 0,5 t - 3,0 t Yalelift ITG Yalelift ITP/G 5,0 t Yalelift ITG

Dimensions Yalelift IT Yalelift IT Yalelift IT Yalelift IT Yalelift IT Yalelift LH Yalelift LH Yalelift LH Yalelift LH Yalelift LH
in mm 500 1000 2000 3000 5000 500 1000 2000 3000 5000

Amin. 245 272 323 382 550 188 211 264 316 425
A1 158 178 205,5 252 260,5 223 250 289 346 345
A2 – – – – – 381 427 511 614 612
B 17 22 30 38 45 17 22 30 38 45
C 24 29 35 40 47 24 29 35 40 47
D 14 19 22 30 37 14 19 22 30 37
F (geared) 92 92 91 107 149,5 92 92 91 107 150
H1 24,5 24 23,5 32 30,5 24 24 24 32 31
I (pushed) 71,5 71,5 95,5 131 142,5 72 72 96 131 143
I (geared) 76,5 76,5 98 132,5 148,5 77 77 98 133 149
L 270 310 360 445 525 270 310 360 445 525
L1 130 130 150 180 209 130 130 150 180 209
L2 159 175 207 256 283 444 488 582 690 720
L3 – – – – – 124 135 172 203 175
L4 – – – – – 184 201 230 265 283
M M 18 M 22 M 27 M 30 M 42 M 18 M 22 M 27 M 30 M 42
O 60 60 80 112 125 60 60 80 112 125
P (geared) 108 110 112 112 117 108 110 112 112 117
T (Range A) 280 290 305 320 364 280 290 305 320 364
T (Range B) 400 410 425 440 484 400 410 425 440 484

Yalelift LHP 0,5 t - 3,0 t Yalelift LHG 0,5 t - 3,0 t

Yalelift LHP 5,0 t Yalelift LHG 5,0 t

27
 Yalelift 360 0,5 t - 3,0 t Yalelift 360 5,0 t Towerlift

Dimensions Yalelift 360 Yalelift 360 Yalelift 360 Yalelift 360 Yalelift 360 Yalelift 360 Yalelift 360 Towerlift Towerlift Towerlift ES
in mm 500 1000 2000 3000 5000 10000 20000 1000 2000 1000

Amin. 300 335 395 520 654 825 980 335 395 335
B 17 22 30 38 45 68 85 22 30 22
C 24 29 35 40 47 68 74 29 35 29
D 133 156 182 220 220 220 303 156 182 213
E 148 175 203 250 250 383 555 205 243 232
F 139 157 183 204 204 204 250 157 183 212
G 139 164 192 225 242 326 391 164 192 164
H 206 242 283 335 352 436 501 242 283 299
I 24 24 31 34 21 136 – 24 31 24
K 61 70 83 95 95 95 396 70 83 124
L 79 87 100 109 109 109 125 87 100 88
M 110 125 156 178 285 401 461 125 156 125
N 14 19 22 30 37 50 56 19 22 19
O – – – – – – – – – 335
P – – – – – – – – – 593
S – – – – – – – – – 455

Yalelift 360 10,0 t Yalelift 360 20,0 t

Towerlift ES

26