ISO Standards Handbook:
Paints and varnishes
Volume 4: Preparation and protection of steel substrates
2002, Ed. 3, 722 p., ISBN 92-67-10357-1
Contents
ISO 8501-1:1988 Preparation of steel substrates before application of paints and related
products — Visual assessment of surface cleanliness — Part 1: Rust grades
and preparation grades of uncoated steel substrates and of steel substrates
after overall removal of previous coatings
ISO 8501-1:1988 / Representative photographic examples of the change of appearance
Suppl:1994 imparted to steel when blast-cleaned with different abrasives
ISO 8501-2:1994 Preparation of steel substrates before application of paints and related
products — Visual assessment of surface cleanliness — Part 2: Preparation
grades of previously coated steel substrates after localized removal of
previous coatings
ISO/TR 8502-1:1991 Preparation of steel substrates before application of paints and related
products — Tests for the assessment of surface cleanliness — Part 1:
Field test for soluble iron corrosion products
ISO 8502-2:1992 Preparation of steel substrates before application of paints and related
products — Tests for the assessment of surface cleanliness — Part 2:
Laboratory determination of chloride on cleaned surfaces
ISO 8502-3:1992 Preparation of steel substrates before application of paints and related
products — Tests for the assessment of surface cleanliness — Part 3:
Assessment of dust on steel surfaces prepared for painting (pressure-
sensitive tape method)
ISO 8502-4:1993 Preparation of steel substrates before application of paint and related
products — Tests for the assessment of surface cleanliness — Part 4:
Guidance on the estimation of the probability of condensation prior to
paint application
ISO 8502-5:1998 Preparation of steel substrates before application of paints and related
products — Tests for the assessment of surface cleanliness — Part 5:
Measurement of chloride on steel surfaces prepared for painting (ion
detection tube method)
ISO 8502-6:1995 Preparation of steel substrates before application of paints and related
products — Tests for the assessment of surface cleanliness — Part 6:
Extraction of soluble contaminants for analysis — The Bresle method
Paints and varnishes, Ed. 3, Vol. 4 Page 1 of 5
ISO 8502-8:2001 Preparation of steel substrates before application of paints and related
products — Tests for the assessment of surface cleanliness — Part 8: Field
method for the refractometric determination of moisture
ISO 8502-9:1998 Preparation of steel substrates before application of paints and related
products — Tests for the assessment of surface cleanliness — Part 9: Field
method for the conductometric determination of water-soluble salts
ISO 8502-10:1999 Preparation of steel substrates before application of paints and related
products — Tests for the assessment of surface cleanliness — Part 10: Field
method for the titrimetric determination of water-soluble chloride
ISO 8503-1:1988 Preparation of steel substrates before application of paints and related
products — Surface roughness characteristics of blast-cleaned steel
substrates — Part 1: Specifications and definitions for ISO surface profile
comparators for the assessment of abrasive blast-cleaned surfaces
ISO 8503-2:1988 Preparation of steel substrates before application of paints and related
products — Surface roughness characteristics of blast-cleaned steel
substrates — Part 2: Method for the grading of surface profile of abrasive
blast-cleaned steel — Comparator procedure
ISO 8503-3:1988 Preparation of steel substrates before application of paints and related
products — Surface roughness characteristics of blast-cleaned steel
substrates — Part 3: Method for the calibration of ISO surface profile
comparators and for the determination of surface profile — Focusing
microscope procedure
ISO 8503-4:1988 Preparation of steel substrates before application of paints and related
products — Surface roughness characteristics of blast-cleaned steel
substrates — Part 4: Method for the calibration of ISO surface profile
comparators and for the determination of surface profile — Stylus
instrument procedure
ISO 8504-1:2000 Preparation of steel substrates before application of paints and related
products — Surface preparation methods — Part 1: General principles
ISO 8504-2:2000 Preparation of steel substrates before application of paints and related
products — Surface preparation methods — Part 2: Abrasive blast-cleaning
ISO 8504-3:1993 Preparation of steel substrates before application of paints and related
products — Surface preparation methods — Part 3: Hand- and
power-tool cleaning
ISO 11124-1:1993 Preparation of steel substrates before application of paints and related
products — Specifications for metallic blast-cleaning abrasives — Part 1:
General introduction and classification
ISO 11124-2:1993 Preparation of steel substrates before application of paints and related
products — Specifications for metallic blast-cleaning abrasives — Part 2:
Chilled-iron grit
ISO 11124-3:1993 Preparation of steel substrates before application of paints and related
products — Specifications for metallic blast-cleaning abrasives — Part 3:
High-carbon cast-steel shot and grit
ISO 11124-4:1993 Preparation of steel substrates before application of paints and related
products — Specifications for metallic blast-cleaning abrasives — Part 4:
Low-carbon cast-steel shot
Paints and varnishes, Ed. 3, Vol. 4 Page 2 of 5
ISO 11125-1:1993 Preparation of steel substrates before application of paints and related
products — Test methods for metallic blast-cleaning abrasives —
Part 1: Sampling
ISO 11125-2:1993 Preparation of steel substrates before application of paints and related
products — Test methods for metallic blast-cleaning abrasives — Part 2:
Determination of particle size distribution
ISO 11125-3:1993 Preparation of steel substrates before application of paints and related
products — Test methods for metallic blast-cleaning abrasives — Part 3:
Determination of hardness
ISO 11125-4:1993 Preparation of steel substrates before application of paints and related
products — Test methods for metallic blast-cleaning abrasives — Part 4:
Determination of apparent density
ISO 11125-5:1993 Preparation of steel substrates before application of paints and related
products — Test methods for metallic blast-cleaning abrasives — Part 5:
Determination of percentage defective particles and of microstructure
ISO 11125-6:1993 Preparation of steel substrates before application of paints and related
products — Test methods for metallic blast-cleaning abrasives —
Part 6 Determination of foreign matter
ISO 11125-7:1993 Preparation of steel substrates before application of paints and related
products — Test methods for metallic blast-cleaning abrasives —
Part 7: Determination of moisture
ISO 11126-1:1993 Preparation of steel substrates before application of paints and related
products — Specifications for non-metallic blast-cleaning abrasives —
Part 1: General introduction and classification
ISO 11126-1:1993 / Technical Corrigendum 1:1997 to ISO 11126-1:1993
Cor. 1:1997
ISO 11126-1:1993 / Technical Corrigendum 2:1997 to ISO 11126-1:1993
Cor. 2:1997
ISO 11126-3:1993 Preparation of steel substrates before application of paints and related
products — Specifications for non-metallic blast-cleaning abrasives —
Part 3: Copper refinery slag
ISO 11126-4:1993 Preparation of steel substrates before application of paints and related
products — Specifications for non-metallic blast-cleaning abrasives — Part 4:
Coal
furnace slag
ISO 11126-5:1993 Preparation of steel substrates before application of paints and related
products — Specifications for non-metallic blast-cleaning abrasives —
Part 5: Nickel refinery slag
ISO 11126-6:1993 Preparation of steel substrates before application of paints and related
products — Specifications for non-metallic blast-cleaning abrasives —
Part 6: Iron furnace slag
ISO 11126-7:1995 Preparation of steel substrates before application of paints and related
products — Specifications for non-metallic blast-cleaning abrasives —
Part 7: Fused aluminium oxide
ISO 11126-7:1995 / Technical Corrigendum 1:1999 to ISO 11126-7:1995
Cor. 1:1999
Paints and varnishes, Ed. 3, Vol. 4 Page 3 of 5
ISO 11126-8:1993 Preparation of steel substrates before application of paints and related
products — Specifications for non-metallic blast-cleaning abrasives —
Part 8: Olivine sand
ISO 11126-9:1999 Preparation of steel substrates before application of paints and related
products — Specifications for non-metallic blast-cleaning abrasives —
Part 9: Staurolite
ISO 11126-10:2000 Preparation of steel substrates before application of paints and related
products — Specifications for non-metallic blast-cleaning abrasives —
Part 10: Almandite garnet
ISO 11127-1:1993 Preparation of steel substrates before application of paints and related
products — Test methods for non-metallic blast-cleaning abrasives —
Part 1: Sampling
ISO 11127-2:1993 Preparation of steel substrates before application of paints and related
products — Test methods for non-metallic blast-cleaning abrasives —
Part 2: Determination of particle size distribution
ISO 11127-3:1993 Preparation of steel substrates before application of paints and related
products — Test methods for non-metallic blast-cleaning abrasives —
Part 3: Determination of apparent density
ISO 11127-4:1993 Preparation of steel substrates before application of paints and related
products — Test methods for non-metallic blast-cleaning abrasives —
Part 4: Assessment of hardness by a glass slide test
ISO 11127-5:1993 Preparation of steel substrates before application of paints and related
products — Test methods for non-metallic blast-cleaning abrasives —
Part 5: Determination of moisture
ISO 11127-6:1993 Preparation of steel substrates before application of paints and related
products — Test methods for non-metallic blast-cleaning abrasives —
Part 6: Determination of water-soluble contaminants by conductivity
measurement
ISO 11127-7:1993 Preparation of steel substrates before application of paints and related
products — Test methods for non-metallic blast-cleaning abrasives —
Part 7: Determination of water-soluble chlorides
ISO 12944-1:1998 Paints and varnishes — Corrosion protection of steel structures by protective
paint systems — Part 1: General introduction
ISO 12944-2:1998 Paints and varnishes — Corrosion protection of steel structures by protective
paint systems — Part 2: Classification of environments
ISO 12944-3:1998 Paints and varnishes — Corrosion protection of steel structures by protective
paint systems — Part 3: Design considerations
ISO 12944-4:1998 Paints and varnishes — Corrosion protection of steel structures by protective
paint systems — Part 4: Types of surface and surface preparation
ISO 12944-5:1998 Paints and varnishes — Corrosion protection of steel structures by protective
paint systems — Part 5: Protective paint systems
ISO 12944-6:1998 Paints and varnishes — Corrosion protection of steel structures by protective
paint systems — Part 6: Laboratory performance test methods
ISO 12944-7:1998 Paints and varnishes — Corrosion protection of steel structures by protective
paint systems — Part 7: Execution and supervision of paint work
Paints and varnishes, Ed. 3, Vol. 4 Page 4 of 5
ISO 12944-8:1998 Paints and varnishes — Corrosion protection of steel structures by protective
paint systems — Part 8: Development of specifications for new work
and maintenance
ISO/TR 15235:2001 Preparation of steel substrates before application of paints and related
products — Collected information on the effect of levels of water-soluble
salt contamination
Subject index
Concordance list of ISO and ASTM standards
Paints and varnishes, Ed. 3, Vol. 4 Page 5 of 5
