AV RECEIVER

RX-V357/HTR-5830 SERVICE MANUAL

本资料由ＯＫＸＩＡ视听皮带资源库ｗｗｗ．ｏｋｘｉａ．ｃｎ提供

IMPORTANT NOTICE
This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel.
It has been assumed that basic service procedures inherent to the industry, and more specifically YAMAHA Products, are already
known and understood by the users, and have therefore not been restated.
WARNING: Failure to follow appropriate service and safety procedures when servicing this product may result in personal
injury, destruction of expensive components, and failure of the product to perform as specified. For these reasons,
we advise all YAMAHA product owners that any service required should be performed by an authorized
YAMAHA Retailer or the appointed service representative.
IMPORTANT: The presentation or sale of this manual to any individual or firm does not constitute authorization, certification or
recognition of any applicable technical capabilities, or establish a principle-agent relationship of any form.
The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover. The research, engineering, and
service departments of YAMAHA are continually striving to improve YAMAHA products. Modifications are, therefore, inevitable
and specifications are subject to change without notice or obligation to retrofit. Should any discrepancy appear to exist, please
contact the distributor's Service Division.
WARNING: Static discharges can destroy expensive components. Discharge any static electricity your body may have
accumulated by grounding yourself to the ground buss in the unit (heavy gauge black wires connect to this buss).
IMPORTANT: Turn the unit OFF during disassembly and part replacement. Recheck all work before you apply power to the unit.

■ CONTENTS
TO SERVICE PERSONNEL ...................................... 2~3 DISPLAY DATA ..................................................... 35~36

RX-V357/HTR-5830
IMPEDANCE SELECTOR ............................................. 3 IC DATA ................................................................. 37~42
FRONT PANELS ........................................................ 3~4 PRINTED CIRCUIT BOARD .................................. 43~51
REAR PANELS .......................................................... 5~9 PIN CONNECTION DIAGRAM .................................... 52
REMOTE CONTROL PANELS ...................................... 9 BLOCK DIAGRAM ....................................................... 53
SPECIFICATIONS .................................................. 10~13 SCHEMATIC DIAGRAM ........................................ 54~58
INTERNAL VIEW ......................................................... 14 PARTS LIST ........................................................... 59~67
DISASSEMBLY PROCEDURES ........................... 14~16 REMOTE CONTROL .............................................. 68~69
SELF DIAGNOSIS FUNCTION (DIAG) ................. 17~33 Parts List for Carbon Resistors ................................ 69
CONFIRMATION OF IDLING CURRENT ................... 34

100938
P.O.Box 1, Hamamatsu, Japan
'05.01
 RX-V357/HTR-5830

■ TO SERVICE PERSONNEL
1. Critical Components Information AC LEAKAGE
Components having special characteristics are marked s and WALL EQUIPMENT TESTER OR
OUTLET UNDER TEST EQUIVALENT
must be replaced with parts having specifications equal to those
originally installed.

2. Leakage Current Measurement (For 120V Models Only)

When service has been completed, it is imperative to verify
INSULATING
that all exposed conductive surfaces are properly insulated TABLE
from supply circuits.
● Meter impedance should be equivalent to 1500 ohms shunted ● Leakage current must not exceed 0.5mA.
by 0.15µF. ● Be sure to test for leakage with the AC plug in both polarities.

“CAUTION”
“F371: FOR CONTINUED PROTECTION AGAINST RISK OF FIRE, REPLACE ONLY WITH SAME TYPE 6A, 125V FUSE.”
CAUTION
F371: REPLACE WITH SAME TYPE 6A, 125V FUSE.
ATTENTION
F371: UTILISER UN FUSIBLE DE RECHANGE DE MEME TYPE DE 6A, 125V.

WARNING: CHEMICAL CONTENT NOTICE!

The solder used in the production of this product contains LEAD. In addition, other electrical/electronic and/or plastic (where
applicable) components may also contain traces of chemicals found by the California Health and Welfare Agency (and
possibly other entities) to cause cancer and/or birth defects or other reproductive harm.

DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS IN YOUR MOUTH FOR ANY REA-
SON WHATSOEVER!

Avoid prolonged, unprotected contact between solder and your skin! When soldering, do not inhale solder fumes or expose
eyes to solder/flux vapor!

If you come in contact with solder or components located inside the enclosure of this product, wash your hands before
handling food.

About Lead Free Solder

RX-V357/HTR-5830

The P.C.B.s installed in this unit are soldered using the following solder.

Side A Side B
DSP P.C.B. Lead Free Solder Lead Free Solder
FUNCTION P.C.B. – Lead Free Solder
MAIN P.C.B. – Lead Free Solder

Side A SMT REFLOW Process

Solder Dip

Side B MI FLOW Process

2
 RX-V357/HTR-5830

Among some types of lead free solder currently available, Caution:

it is recommended to use one of the following types for the 1. As the melting point temperature of the lead free solder
repair work. is about 30°C to 40°C (50°F to 70°F) higher than that of
the lead solder, be sure to use a soldering iron suitable
• Sn + Ag + Cu (tin + silver + copper)
to each solder.
• Sn + Cu (tin + copper)
• Sn + Zn + Bi (tin + zinc + bismuth) 2. If lead solder must be used, be sure to remove lead free
solder from each terminal section of the parts to be
replaced and from the area around it completely before
soldering, or make sure that the lead free solder and
lead solder melt together fully.

■ IMPEDANCE SELECTOR
U, C models

IMPEDANCE SELECTOR

WARNING:
Do not change the IMPEDANCE SELECTOR
switch setting while the power to this unit is
on, otherwise this unit may be damaged.

■ FRONT PANELS

RX-V357/HTR-5830
RX-V357 (C, R, T, K, A, L models)

3
 RX-V357/HTR-5830

RX-V357 (B, G, E models)

HTR-5830 (U, C, R, T, K, A models)

RX-V357/HTR-5830

HTR-5830 (B, G, E models)

4
 RX-V357/HTR-5830

■ REAR PANELS
RX-V357 (C model)

RX-V357 (R model)

RX-V357/HTR-5830
RX-V357 (T model)

5
 RX-V357/HTR-5830

RX-V357 (K model)

RX-V357 (A model)
RX-V357/HTR-5830

RX-V357 (B, G, E models)

6
 RX-V357/HTR-5830

RX-V357 (L model)

HTR-5830 (U, C models)

RX-V357/HTR-5830
HTR-5830 (R model)

7
 RX-V357/HTR-5830

HTR-5830 (T model)

HTR-5830 (K model)
RX-V357/HTR-5830

HTR-5830 (A model)

8
 RX-V357/HTR-5830

HTR-5830 (B, G, E models)

■ REMOTE CONTROL PANELS

RX-V357 (C, R, T, K, A, L models) RX-V357 (B, G, E models)
HTR-5830 (U, C, R, T, K, A models) HTR-5830 (B, G, E models)

RX-V357/HTR-5830

9
 RX-V357/HTR-5830

Total Harmonic Distortion

■ SPECIFICATIONS (1 kHz, 50 W, 6 ohms)
■ Audio Section CD, etc. (Effect Off) to
FRONT L/R SP OUT ............................. 0.06 % or less
Minimum RMS Output Power (Power Amp. Section) Signal to Noise Ratio (IHF-A network)
(1 kHz, 0.9 % THD, 8 ohms)
CD, etc. (Input shorted, EFFECT OFF) to
FRONT L/R FRONT L/R SP OUT
U, C models .................................. 110 W + 110 W 250mV .......................................... 100 dB or more
CENTER
U, C models ................................................. 110 W Residual Noise (IHF-A network)
SURROUND L/R FRONT L/R SP OUT ............................. 150 µV or less
U, C models .................................. 110 W + 110 W Channel Separation
(1 kHz, 0.9 % THD, 6 ohms) (Vol -14 dB, Effect Off)
FRONT L/R CD, etc. (Input 5.1 k-ohms shorted, 1 kHz / 10 kHz)
U, C models .................................. 110 W + 110 W ..................................... 60 dB or more / 45 dB or more
R, T, K, A, B, G, E, L models ....... 100 W + 100 W
CENTER Tone Control Characteristics
U, C models ................................................. 110 W BASS
R, T, K, A, B, G, E, L models ...................... 100 W Boost/Cut ...................................... ±10 dB (100Hz)
SURROUND L/R TREBLE
U, C models .................................. 110 W + 110 W Boost/Cut ..................................... ±10 dB (20 kHz)
R, T, K, A, B, G, E, L models ....... 100 W + 100 W
Filter Characteristics
Maximum Power [R, T, K, L models] FRONT, SURROUND L/R
(EIAJ, 1 kHz, 10 % THD, 6 ohms) SP Small (H.P.F.) ............................ 90 Hz / 12 dB oct.
FRONT L/R ......................................... 110 W + 110 W SUBWOOFER (L.P.F.) ................... 90 Hz / 18 dB oct.
CENTER ............................................................. 110 W
SURROUND L/R ................................. 110 W + 110 W ■ Video Section
DIN Standard Output Power Per Channel
Video Signal Type
[B, G, E, L models]
(1 kHz, 0.7 % THD, 4 ohms) U, C, R, K models ............................................... NTSC
FRONT L/R ......................................... 105 W + 105 W T, A, B, G, E, L models .......................................... PAL
CENTER ............................................................. 105 W Video Signal Level
SURROUND L/R ................................. 105 W + 105 W ........................................................... 1 Vp-p / 75 ohms
IEC Power [B, G, E, L models] Component Signal Level
1 kHz, 0.1 % THD, 6 ohms ..................... 90 W + 90 W ........................................................... 1 Vp-p / 75 ohms
Dynamic Power Per Channel (IHF) Maximum Input Level
U, C models (8/6/4/2 ohms) .......... 120/140/160/180 W ........................................................... 1.5 Vp-p or more
R, T, K, A, B, G, L, E models Signal to Noise Ratio
(6/4/2 ohms) ......................................... 105/135/165 W ............................................................... 50 dB or more
Dynamic Headroom [U, C models] Monitor Out Frequency Response
6 ohms .............................................................. 0.38 dB Video Signal Level .................... 5 Hz to 10 MHz, -3 dB
Input Sensitivity / Input Impedance Component Signal Level ........... 5 Hz to 60 MHz, -3 dB
RX-V357/HTR-5830

CD, etc. ........................................ 200 mV / 47 k-ohms

EXT. DECODER ■ FM Section
FRONT L/R, CENTER, SURROUND L/R,
SUB WOOFER ...................... 200 mV / 47 k-ohms Tuning Range
Maximum Input Signal Level U, C models .................................... 87.5 to 107.9 MHz
(1 kHz, 0.5 % THD, Effect On) R, L models ........ 87.5 to 108.0 / 87.50 to 108.00 MHz
CD, etc. .................................................. 2.0 V or more T, K, A, B, G, E models ............... 87.50 to 108.00 MHz
Output Level / Output Impedance 50dB Quieting Sensitivity (IHF)
REC OUT .................................... 200 mV / 1.2 k-ohms (1 kHz, 100 % Mod.)
SUB WOOFER (FRONT SP: Small) .. 4 V / 1.2 k-ohms Mono ................................................. 2.8 µV (20.2 dBf)

Headphone Jack Rated Output / Impedance Signal to Noise Ratio (IHF)

CD, etc. (1 kHz, 200 mV, 8 ohms) .... 0.4 V / 470 ohms Mono / Stereo ......................................... 73 dB / 70 dB

Frequency Response Harmonic Distortion

(1 kHz)
CD, etc. to FRONT L/R (10 Hz to 100 kHz) .... 0 / -3.0 dB
Mono/Stereo ............................................ 0.5 % / 0.5 %

10
 RX-V357/HTR-5830

Antenna Input
..................................................... 75 ohms unbalanced
Manufactured under license from Dolby Laboratories.
■ AM Section “Dolby”, “Pro Logic” and the double-D symbol are
trademarks of Dolby Laboratories.
Tuning Range
U, C models ...................................... 530 to 1,710 kHz
R, L models ............... 530 to 1,710 / 531 to 1,611 kHz
T, K, A, B, G, E models ..................... 531 to 1,611 kHz
“DTS” and “DTS Digital Surround” are registered
Antenna trademarks of Digital Theater Systems, Inc.
................................................................ Loop Antenna

■ General
"SILENT CINEMA" is a trademark of YAMAHA CORPORATION.
Power Supply
U, C models ...................................... AC 120 V, 60 Hz • DIMENSIONS
R, L models ............ AC 110-120/220-240 V, 50/60 Hz

(7/8")
21.7
T model ............................................. AC 220 V, 50 Hz
K model ............................................. AC 220 V, 60 Hz
A model ............................................. AC 240 V, 50 Hz
B, G, E models .................................. AC 230 V, 50 Hz
Power Consumption

274.9 (10-7/8")
317.6 (12-1/2")
U, C models ........................................ 240 W / 320 VA
R, T, K, A, B, G, E, L models ............................. 240 W
Standby Power Consumption (reference data)
U, C models ........................................................ 0.5 W
T, K, A, B, G, E models ....................................... 0.7 W
Maximum Power Consumption [R model]
5ch Drive, 10 % THD ......................................... 510 W

(13/16")
Dimensions (W x H x D)

21
.. 435 x 151 x 317.6 mm (17-1/8" x 5-15/16" x 12-1/2")
Weight

151 (5-15/16")
130 (5-1/8")
................................................... 9.0 kg (19 lbs. 13 oz.)
Finish
RX-V357 ................................. Gold color (T, L models)
Black color (C, R, A, B, G, E models)

(13/16")
435 (17-1/8")
Silver color (C, R, K, B, G, E, L models)
HTR-5830 ..................................... Gold color (T model) 21
Black color (U, C, R, G, E models) Unit : mm (inch)

RX-V357/HTR-5830
Silver color (U, C, R, T, K, A, B, G, E models)
Accessories
Remote Control x 1, Batteries (Manganese Dry) x 2,
Indoor FM Antenna x 1, AM Loop Antenna x 1

* Specifications are subject to change without notice due

to product improvements.

U ........ U.S.A. model C .... Canadian model

R ........ General model T ..... Chinese model
K ........ Korean model A ..... Australian model
B ........ British model G .... European model
E ........ South European model L ..... Singapore model

11
 RX-V357/HTR-5830

• Set Menu Table

The value inside of [ ] shows initial setting.
Category No. MAIN MENU SUB MENU VALUE [INITIAL]
1 SETUP ROOM： S >M L S/[M]/L
SUBWOOFER YES [YES]/NONE
SPEAKERS 5spk 2/3/4/[5]
>SET CANCEL [SET]/CANCEL
Check：Test Tone
BASIC Check OK? Yes [Yes]/No
2 SP LEVEL FL -----||------- R [Center] ±10step
C -----||------- [Center] ±10step
SL -----||------- [Center] ±10step
SR -----||------- [Center] ±10step
SWFR ------------| [0dB] -20step
1 SPEAKER SET 1A CENTER SML LRG/[SML]/NON
1B FRONT LRG [LRG]/SML
1C SURR LR SML LRG/[SML]/NON
1D BASS BOTH SWFR/FRNT/[BOTH]
2 SP DISTANCE UNIT meters(m)/feet(ft)
FRONT L/R 3.00m 0.3 to 24m [3.00m]/0.1m step
CENTER 3.00m 0.3 to 24m [3.00m]/0.1m step
(Effective distance difference 1.5m)
SOUND SURR LR 3.00m 0.3 to 24m [3.00m]/0.1m step
3 LFE LEVEL SP LFE 0 -20dB to [0dB]/1dB step
HP LFE 0 -20dB to [0dB]/1dB step
4 DYNAMIC RANGE SP D.R > MAX MIN/STD/[MAX]
HP D.R > MAX MIN/STD/[MAX]
5 CENTER GEQ 100Hz -||- 0 -6dB to +6dB [0dB]/1dB step
300Hz -||- 0 -6dB to +6dB [0dB]/1dB step
1kHz -||- 0 -6dB to +6dB [0dB]/1dB step
3kHz -||- 0 -6dB to +6dB [0dB]/1dB step
10kHz -||- 0 -6dB to +6dB [0dB]/1dB step
6 HP TONE CONTROL HP BASS 0 -6dB to +3dB [0dB]/1dB step
HP TRBL 0 -6dB to +3dB [0dB]/1dB step
1 I/O ASSIGN 1A (A) DVD [DVD], MD/CD-R, CD, VCR, V-AUX, DTV/CBL
1A (B) DTV/CBL CD, VCR, V-AUX, [DTV/CBL], DVD, MD/CD-R
1B (1) DVD CD, VCR, V-AUX, DTV/CBL, [DVD], MD/CD-R
INPUT
1B (2) DTV/CBL CD, VCR, V-AUX, [DTV/CBL], DVD, MD/CD-R
1C (3) CD [CD], VCR, V-AUX, DTV/CBL, DVD, MD/CD-R
2 INPUT MODE 2 >AUTO LAST [AUTO]/LAST
1 DISPLAY SET 1 DIMMER 0 -4 to [0]/1 step
OPTION 2 MEMORY GUARD 2 M GUARD OFF [OFF]/ON
3 AUDIO MUTE 3 MUTE: MUTE [MUTE]/-50dB/-20dB
RX-V357/HTR-5830

• The variable range of the parameter (Min/Max/Step)

Unit
DSP LEVEL -6/+3/1 dB
DELAY 1/99/1 ms

5ch Stereo Parameter Unit

CT LEVEL 0/100/1 %
SL LEVEL 0/100/1 %
SR LEVEL 0/100/1 %

Pro Logic II Music Parameter Unit

PANORAMA OFF/ON
DIMENSIONS -3/+3/1
CT WIDTH 0/7/1

12
 RX-V357/HTR-5830

• Resetting the factory presets • Changing tuner’s FREQUENCY STEP (R, L models
To reset all of parameters, do the following procedure. only)
This procedure completely resets ALL parameters, in- To change the tuner’s frequency step, do the following
cluding the SET MENU, level, assign, and tuner presets. procedure.

Note: Only the tuner’s frequency step is not reset in this

1 With the main unit in standby mode, hold down “STE-
procedure. (R, L models)
REO (EFFECT)” key and press “STANDBY/ON” key.
Then PRESET is displayed.
1 With the main unit in standby mode, hold down “STE-
REO (EFFECT)” key and press “STANDBY/ON” key.
2 Press “PROGRAM ” or “PROGRAM ” key to select
Then PRESET is displayed.
TUNER.
2 Press “STEREO (EFFECT)” key to select the desired
3 Press “STEREO (EFFECT)” key to select the desired
setting.
setting.
RESET To reset the main unit to its factory presets.
AM10/FM100 or AM9/FM50
CANCEL To cancel without making any changes.

4 Press “STANDBY/ON” key.

3 Press “STANDBY/ON” key.
The main unit changes to standby mode.
If you selected RESET, the main unit is reset its fac-
tory presets and switches to standby mode. Note: The setting you made are reflected the next
If you selected CANCEL, the main unit switches to time this main unit’s power is turned on.
standby mode and nothing is reset.

Note: The setting you made are reflected the next

time this main unit’s power is turned on.

RX-V357/HTR-5830

13
 RX-V357/HTR-5830

■ INTERNAL VIEW
1 2 3 4 5 6 7 8 9 0
1 MAIN (2) P.C.B.
2 MAIN (6) P.C.B. (U, C models)
FUNCTION (7) P.C.B. (R, L models)
3 MAIN (4) P.C.B.
4 MAIN (5) P.C.B.
5 Tuner
6 MAIN (3) P.C.B.
7 FUNCTION (3) P.C.B.
8 FUNCTION (6) P.C.B.
9 FUNCTION (1) P.C.B.
0 DSP P.C.B.
A FUNCTION (9) P.C.B.
B FUNCTION (2) P.C.B.
C MAIN (1) P.C.B.
D FUNCTION (4) P.C.B.
E FUNCTION (8) P.C.B.
H G F E D C B A F Power Transformer
G FUNCTION (10) P.C.B.
H FUNCTION (5) P.C.B.

■ DISASSEMBLY PROCEDURES
(Remove parts in the order as numbered.)
Disconnect the power cable from the AC outlet.

1. Removal of Top Cover 2. Removal of Front Panel Unit

a. Remove 5 screws (1) and 4 screws (2). (Fig. 1) a. Loosen the harness fixture fixing the cable.
b. Slide the Top Cover rearward to remove it. (Fig. 1) b. Remove CB431, CB653 and CB804. (Fig. 1)
c. Remove 6 screws (3). (Fig. 1)
d. Release a hook on the right side of the Front Panel
Top Cover Unit, then remove the Front Panel Unit forward. (Fig. 1)

2 1
1
RX-V357/HTR-5830

CB653

CB431 2

CB804
3

Front Panel Unit

3
Hook Fig. 1
14
 RX-V357/HTR-5830

3. Removal of MAIN (3) ~ MAIN (5), FUNCTION MAIN (5) P.C.B.

MAIN (3) P.C.B.
(3), FUNCTION (6) P.C.B.s and Tuner
MAIN (4) P.C.B.
a. Remove CB242, CB391 and CB701. (Fig. 2) CB701 CB391
b. Remove 9 screws (4). (Fig. 3) CORD STOPPER TUNER FUNCTION (3) P.C.B.
c. Remove MAIN (3), MAIN (5) P.C.B.s. and the
Tuner. (Fig. 2) REAR PANEL FUNCTION (6)
P.C.B.
d. Remove 18 screws (5). (Fig. 3)
e. Remove 3 screws (6). (Fig. 3)
f. Remove Cord Stopper. (Fig. 2)
g. Remove Rear Panel. (Fig. 2)
h. Remove MAIN (4), FUNCTION (3) and
FUNCTION (6) P.C.B.s. (Fig. 2)
CB242

Fig. 2

4 5

5 6

Fig. 3

4. Removal of DSP P.C.B.

a. Remove 1 screw (7). (Fig. 4)

RX-V357/HTR-5830
b. Remove CB803. (Fig. 4)
c. Remove the DSP P.C.B. with the Support/DSP. (Fig. 4)

CB803

DSP P.C.B.

Note:
When assembling the DSP P.C.B., be careful not to
bend the pin of the connectors (CB247 and CB249).

7 Support / DSP
Fig. 4
15
 RX-V357/HTR-5830

5. Removal of MAIN (1), FUNCTION (1), FUNCTION (8)

and FUNCTION (9) P.C.B.s
a. Remove 1 screw (8). (Fig. 5) e. Remove 4 screws (0). (Fig. 5)
b. Remove FUNCTION (1) P.C.B. (Fig. 5) f. Remove MAIN (1), FUNCTION (4), FUNCTION (8) and
c. Remove CB103, CB104 and CB652. (Fig. 5) FUNCTION (9) P.C.B.s. (Fig. 5)
d. Remove 3 screws (9). (Fig. 5)

FUNCTION (8) P.C.B.

B CB104
A
CB103
0 9 CB652
MAIN (1) P.C.B.
9

FUNCTION (1) P.C.B.

0
0

Note:
FUNCTION (4) P.C.B.
When assembling the FUNCTION (1) P.C.B., be careful not to
bend the pin of the connectors (CB101 and CB244).
8
FUNCTION (9) P.C.B.
Fig. 5

When checking the P.C.B.:

a. Remove the Top Cover.
b. Remove 3 screws (6). (Fig. 3)
c. Remove 1 screw (7). (Fig. 4)
d. Remove 3 screws (9). (Fig. 5)
e. Remove 4 screws (0). (Fig. 5)
f. Remove 1 screw (A). (Fig. 5)
g. Remove 1 screw (B). (Fig. 5)
h. Place the P.C.B. upright. (Fig. A and B)
i. Be sure to connect the ground of MAIN (1) P.C.B.
(G103, G104, G241) and FUNCTION (4) P.C.B.
(G651) to the chassis with a jumper wire or the like.
RX-V357/HTR-5830

Fig. A Fig. B
16
 RX-V357/HTR-5830

■ SELF DIAGNOSIS FUNCTION (DIAG)

There are 15 DIAG menu items, each of which has sub-menu items.
Listed in the table below are menu items and sub-menu items.
Note that not all menu items listed will apply to the models covered in this service manual.

No DIAG menu sub-menu

1 DSP THROUGH 1. ANALOG BYPASS
2. YSS 0dB
3. YSS Presence 0dB
4. YSS FULL BIT
5. YSS FULL BIT P
2 RAM THROUGH RAM 0dB
3 DOLBY PRO LOGIC 1. PRO LOGIC I
2. PRO LOGIC II
3. Neo:6 (Not applied to these models)
4 SPEAKERS SET 1. FRONT: SMALL 0dB
2. CENTER: NONE
3. LFE/BASS: FRONT
4. PRESENCE MIX: 5ch
5. SURROUND B power (Not applied to these models)
6. Tone Control Flat
7. Tone Control +10dB
8. Tone Control -10dB
5 HP Test 1. FRONT 12 dB
2. FRONT 15 dB
6 OTHER INPUT EXTERNAL DECODER
7 DISPLAY CHECK 1. VFD CHECK (Initial display)
2. VFD DISP OFF (All segments OFF)
3. VFD DISP ALL (All segments ON 100%)
4. VFD DIMMER (All segments ON 50%)
5. CHECKED PATTERN (ON in lattice)
8 MANUAL TEST 1. TEST ALL
2. TEST FRONT L
3. TEST CENTER
4. TEST FRONT R
5. TEST SURROUND R
6. TEST SURROUND C (Not applied to these models)
7. TEST SURROUND L

RX-V357/HTR-5830
8. TEST LFE
9 FACTORY PRESET 1. PRESET INHIBITED (memory initialization inhibited)
2. PRESET RESERVED (memory initialized)
10 AD DATA CHECK 1. DC/PS (protection indication)
/FAN TEST 2. THM/Fan
3. REC-OUT (Not applied to these models)
4. IMP SW/POWER LIMIT
5. K0/K1 (panel key)
6. FAN DRIVE TEST: HIGH (Not applied to these models)
7. FAN DRIVE TEST: MID (Not applied to these models)
8. FAN DRIVE TEST: LOW (Not applied to these models)

17
 RX-V357/HTR-5830

No DIAG menu sub-menu

11 IF STATUS 1. INSIDE STATUS 1 (5 Byte)
2. INSIDE STATUS 2 (3 Byte)
3. CHANNEL STATUS 1 (5 Byte)
4. CHANNEL STATUS 2 (5 Byte)
5. CHANNEL STATUS 3 (5 Byte)
6. CHANNEL STATUS 4 (5 Byte)
7. CHANNEL STATUS 5 (4 Byte)
8. BSI (YSS) 1 (5 Byte)
9. BSI (YSS) 2 (5 Byte)
10. BSI (YSS) 3 (5 Byte)
11. BSI (YSS) 4 (4 Byte)
12. BSI (CS) 1 (5 Byte)
13. BSI (CS) 2 (5 Byte)
14. BSI (CS) 3 (5 Byte)
15. BSI (CS) 4 (5 Byte)
16. BSI (CS) 5 (1 Byte)
17. YSS938-1 (5 Byte)
18. YSS938-2 (5 Byte)
19. YSS938-3 (4 Byte)
20. SECOND DECODER (3 Byte)
21. Mute Trigger (5 Byte)
12 DSP RAM CHECK 1. YSS938 BUS CHECK
2. PLD/SRAM BUS CHECK
13 SD DL CODE 1. ROM DATA Version
2. TOC Area 0
3. TOC Area 1
4. TOC Area 2
5. TOC Area 3
6. TOC Area 4
7. TOC Area 5
8. Sum check Area 0
9. Sum check Area 1
10. Sum check Area 2
11. Sum check Area 3
12. Sum check Area 4
13. Sum check Area 5
14 SOFT SWITCH 1. SW MODE: PCB/SOFT
RX-V357/HTR-5830

2. MODEL SETTING: V357/V357T

3. TUNER DESTINATION: UC/AKGTE/RL
4. TUNER: EXIST/NOT
5. RDS: EXIST/NOT
6. ZONE 2: EXIST/NOT
7. VIDEO FORMAT (Not applied to these models)
15 ROM VERSION/CHECK SUM/ 1. VERSION
PORT 2. CHECK SUM ALL/PROGRAM
3. PORT
4. AAC PORT

18
 RX-V357/HTR-5830

• Starting DIAG • Display provided when DIAG started

Press the “STANDBY/ON” key while simultaneously The FL display of the main unit displays the protection
pressing those two keys of the main unit as indicated in the function history data and the version (1 alphabet) and the
figure below. DIAG menu [sub-menu (ANALOG BYPASS) of DIAG
menu No.1 DSP THROUGH] a few seconds later.
Keys of main unit
When there is no history of protection function:
When there is no history
of protection function Version (1 alphabet)

Opening message

After a few seconds

DIAG menu display

Turn on the power while pressing these keys.

When there is a history of protection function:

• Starting DIAG in the protection cancel When there is a history of protection
mode function due to excess current Version (1 alphabet)
If the protection function works and causes hindrance to
trouble diagnosis, cancel the protection function as
described below, and it will be possible to enter the DIAG
mode. (The protection functions other than the excess Cause: An excessive current flowed through the power
current detect function will be disabled.) amplifier.
Supplementary information: As the current through the
Press the “STANDBY/ON” key while simultaneously power transistor is detected, the abnormal channel can be
pressing those two keys indicated in the figure above. At identified by checking the current detect transistor.
this time, keep pressing those two keys for 3 seconds or
longer. Turning on the power without correcting the abnormality
will cause the protection function to work immediately and
In this mode, the “SLEEP” segment of the FL display of the the power supply will instantly be shut off.
main unit flashes to indicate that the mode is DIAG mode
with the protection functions disabled. Note)
• Applying the power to a unit without correcting the
CAUTION! abnormality can be dangerous and cause additional
Using this product with the protection function disabled circuit damage.
may cause damage to itself. Use special care for this point • The output transistors in each amplifier channel
when using this mode. should be checked for damage before applying any
power.
• The amplifier current should be monitored by
• Canceling DIAG measuring across the emitter resistors for each

RX-V357/HTR-5830
[1] Before canceling DIAG, execute setting for PRESET of channel.
DIAG menu No.9 (Memory initialization inhibited or
Memory initialized). When there is a history of protection
* In order to keep the user memory stored, be sure to function due to an abnormal voltage in
the power supply section Version (1 alphabet)
select PRESET INHIBITED (Memory initialization
inhibited).
[2] Turn off the power by pressing the “STANDBY/ON”
key of the main unit. Voltage display in %

Cause: The voltage in the power supply section is

abnormal.
Supplementary information: The abnormal voltage is
displayed in % based on 5V as 100%.

Turning on the power without correcting the abnormality

will cause the protection function to work 1 second later
and the power supply will be shut off.
19
 RX-V357/HTR-5830

When there is a history of protection • Operation procedure of DIAG menu and

function due to abnormal DC output Version (1 alphabet)
SUB-MENU
There are 15 MENU items, each of which has some SUB-
MENU items.
Cause: DC output of the power amplifier is abnormal. DIAG menu selection
Turning on the power without correcting the abnormality Main unit: Select the menu using (Forward) and
will cause the protection function to work 3 seconds later (Reverse) PROGRAM keys.
and the power supply will be shut off.
SUB-MENU selection
Main unit: Select the sub-menu using - and + BASS/
When there is a history of protection TREBLE keys.
function due to excessive heat sink
temperature Version (1 alphabet) Keys of main unit

Voltage display in %
DIAG menu selection
Cause: The temperature of the heat sink is excessive.
Supplementary information: The abnormal voltage is
SUB-MENU selection
displayed in % based on 5V as 500%.

Turning on the power without correcting the abnormality

will cause the protection function to work 1 second later
• Functions in DIAG mode
and the power supply will be shut off.
In addition to the DIAG menu items, functions as listed
below are available.
* Additional causes of protection can be due to loose
• Input selection, 6CH input
connections, associated components, CPU, etc.
• Center/Surround/Sub-woofer level adjustment
* For the protection voltage value, refer to DIAG menu
• Muting
No.10 described later.
• Power on/off
• Master volume
• History of protection function
When the protection function has worked, its history is * Functions related to the tuner and the set menu are not
stored in memory with a backup. Even if no abnormality available.
is noted while servicing the unit, an abnormality which * It is possible to confirm Menu No.11 IF STATUS while
has occurred previously can be defined as long as the keeping the signal process (operation status) of each
backup data has been stored. DIAG menu by using the input mode key of the main
The history of the protection function is cleared when unit.
DIAG is cancelled by selecting PRESET RESERVED
(Memory initialized) of DIAG menu No.9 or when the
backup data is erased. • Initial settings used to start DIAG
The following initial settings are used when starting DIAG.
When DIAG is canceled, these settings are restored to
RX-V357/HTR-5830

those before starting DIAG.

• Display during menu operation
• Master volume: -24dB
During the DIAG operation, the function at work is
• Input: DVD (6CH INPUT OFF)
indicated on the FL indicator. The contents displayed
• Effect level: 0dB
during the function operation are described in the later
• Audio mute: OFF
section on details of functions.
• Speaker setting: LARGE / BASS OUT = BOTH
• DIAG menu: DSP THROUGH (1. ANALOG BYPASS)

20
 RX-V357/HTR-5830

• Details of DIAG menu

With full-bit output specified in some modes, it is possible
to execute 0dBFS output without including the head
margin in each channel.

1. DSP THROUGH
Main DSP of YSS938 is selected for Front L/R output.

ANALOG BYPASS YSS Presence 0dB

• The signal for L/R is output as it is without passing • The Presence CH signal including the head margin is
through the DSP section. output at the Front CH.
Head margin:
FRONT L/R: -6dBFS, Center: 0dBFS,
SL/SR: 0dBFS, SWFR: Add L/R signal at 0dBFS.
Reference data
INPUT: DVD ANALOG
SWFR: 50Hz, Others: 1kHz
SPEAKER OUTPUT (1kHz) SUBWOOFER
Input level Volume FRONT OUTPUT Reference data
L/R CENTER SL/SR (50Hz) INPUT: DVD ANALOG
Both ch, -20 dBm +6.0 dB +11.5 dBm -∞ -∞ -∞ SWFR: 50Hz, Others: 1kHz
SPEAKER OUTPUT (1kHz) SUBWOOFER
Input level Volume FRONT OUTPUT
L/R CENTER SL/SR (50Hz)
YSS 0dB Both ch, -20 dBm +6.0 dB -∞ -∞ -∞ -∞
• The signal is output including the head margin.
Head margin:
FRONT L/R: 0dBFS, Center: -6dBFS,
SL/SR: -12dBFS, YSS FULL BIT
SWFR: Add L/R signal at -20dBFS. • The signal is output in digital full bit without including
the head margin. The SWFR signal is output but not in
digital full bit.

Reference data
INPUT: DVD ANALOG
SWFR: 50Hz, Others: 1kHz Reference data
SPEAKER OUTPUT (1kHz) SUBWOOFER INPUT: DVD ANALOG
Input level Volume FRONT OUTPUT SWFR: 50Hz, Others: 1kHz
L/R CENTER SL/SR (50Hz)
SPEAKER OUTPUT (1kHz) SUBWOOFER
Both ch, -20 dBm +6.0 dB +11.5 dBm +11.5 dBm +11.5 dBm -0.5 dBm Input level Volume FRONT OUTPUT
L/R CENTER SL/SR (50Hz)
Both ch, -20 dBm +6.0 dB +11.5 dBm +11.5 dBm +11.5 dBm -0.5 dBm

DSP THROUGH RX-V357/HTR-5830

YSS (Analog)

Analog A/D AD L/R

L/R
C(L) C/SW
L/R
Sp Config
LFE
DIR LS/RS (R)

SL/SR
Digital C/LFE
(L/R) SL/SR

L/R
(L/R) FL/FR

Main DSP Sub DSP

(Shaded items not used in this example)

21
 RX-V357/HTR-5830

YSS FULL BIT P

• The Presence CH signal is output in digital full bit at the
Front CH.

Reference data
INPUT: DVD ANALOG
SWFR: 50Hz, Others: 1kHz
SPEAKER OUTPUT (1kHz) SUBWOOFER
Input level Volume FRONT OUTPUT
L/R CENTER SL/SR (50Hz)
Both ch, -20 dBm +6.0 dB -∞ -∞ -∞ -∞

DSP THROUGH
YSS (PCM)

Analog A/D AD L/R

L/R
C(L) C/SW
L/R

LFE Sp Config
DIR LS/RS (R)

SL/SR
Digital C/LFE (L/R) SL/SR

L/R L/R
(L/R)

Main DSP Sub DSP

(Shaded items not used in this example)

DSP THROUGH
YSS (DD / dts [EX / ES off])

Analog A/D AD L/R

L/R
C C/SW
L/R
Sp Config
DIR DD/dts LS/RS
LFE

decode RL/RR
Digital C/LFE
(L/R) RL/RR

FL/FR FL/FR
RX-V357/HTR-5830

Main DSP Sub DSP

(Shaded items not used in this example)

22
 RX-V357/HTR-5830

2. RAM THROUGH
This function is for YSS938 only.
Only the CT signal is output through the Sub DSP –
DRAM.

RAM 0dB

Reference data
INPUT: DVD ANALOG
SWFR: 50Hz, Others: 1kHz

SPEAKER OUTPUT (1kHz) SUBWOOFER

Input level Volume FRONT OUTPUT
L/R CENTER SL/SR (50Hz)
Both ch, -20 dBm +6.0 dB -∞ +5.5 dBm -∞ -∞

RAM THROUGH
(Auto)

Analog A/D AD L/R

* Each signal except the SW

C/SW
L/R signal passes through the
Same as DSP external DRAM.
DIR through "YSS" LS/RS
* The basic path is the
Digital (automatic C/LFE same as DSP through L/R

selection) "YSS" SL/SR

(automatic selection)
Main DSP Sub DSP

4Mbit DRAM

(Shaded items not used in this example)

RX-V357/HTR-5830

23
 RX-V357/HTR-5830

3. PRO LOGIC
PRO LOGIC I PRO LOGIC II

Reference data Reference data

INPUT: DVD ANALOG INPUT: DVD ANALOG
SWFR: 50Hz, Others: 1kHz SWFR: 50Hz, Others: 1kHz
SPEAKER OUTPUT (1kHz) SUBWOOFER SPEAKER OUTPUT (1kHz) SUBWOOFER
Input level Volume
FRONT OUTPUT Input level Volume
FRONT OUTPUT
L/R CENTER SL/SR (50Hz) L/R CENTER SL/SR (50Hz)
Each ch, -20 dBm +6.0 dB +11.5 dBm - ∞ -∞ -10.5 dBm Each ch, -20 dBm +6.0 dB +11.5 dBm -∞ -∞ -10.5 dBm
Both ch, -20 dBm +6.0 dB - ∞ +14.5 dBm -∞ -∞ Both ch, -20 dBm +6.0 dB - ∞ +14.5 dBm -∞ -∞

The L/C/R/SL/SR signals undergo the Pro-Logic

processing and C/SL/SR signals are output through Sub
DSP-DRAM. The Main DSP is selected for FRONT L/R
output.
Using the sub-menu, it is possible to select PRO LOGIC I,
II (Movie). The Auto Input Balance function is always off.
When the Dolby Digital Multi input is used, the function is
the same as in the Dolby Digital Normal mode.
The LFE signal is not output when decoding in the PRO
LOGIC I, II mode.

Dolby Pro Logic (Auto)

Analog A/D AD L/R

L/R
C C/SW
L/R
Sp Config
DIR DPL/PLII LS/RS
decode
Digital C/-
SL/SR SL/SR

L/R

Main DSP Sub DSP

4Mbit DRAM
RX-V357/HTR-5830

(Shaded items not used in this example)

Neo:6
(Not applied to these models.)

24
 RX-V357/HTR-5830

4. SPEAKERS SET
The input signal is automatically identified and switched in The signals output from the DSP block are the same as 1.
the priority order of dts → DOLBY DIGITAL → AAC → DSP THROUGH: YSS 0dB.
PCM AUDIO → Analog (A/D) according to the signal
detection.

FRONT: SMALL 0dB CENTER: NONE LFE/BASS: FRONT

Presence Mix: 5ch Surround B power Tone Control Flat

Not applied to these models.

Tone Control +10dB Tone Control –10dB

The analog switch settings for each sub-menu are as

shown in the table below.

Sub-menu CENTER SP SURROUND SP FRONT SP FRONT LEVEL LFE/BASS

1 FRONT: SMALL 0dB LARGE LARGE SMALL 0dB SWFR
2 CENTER: NONE NONE LARGE LARGE 0dB BOTH
3 LFE/BASS: FRONT SMALL SMALL LARGE 0dB FRONT
4 Presence Mix: 5CH LARGE LARGE LARGE 0dB BOTH

LARGE: This mode is used with a speaker having Sub-menu Treble Bass
high bass reproduction performance (a large 6 Tone Control Flat 0 dB 0 dB
unit). Full bandwidth signals are output.
7 Tone Control +10dB +10 dB +10 dB
SMALL: This mode is used with a speaker having low
8 Tone Control –10dB –10 dB –10 dB
bass reproduction performance (a small
unit). The signals of 90Hz or less are mixed
into the channel specified by LFE/BASS.
NONE: This mode is used with no center speaker.
The center content is reduced by 3dB and
distributed to FRONT L/R.

RX-V357/HTR-5830
Reference data
INPUT: DVD ANALOG (Both ch)
SPEAKER OUTPUT (1kHz) SUBWOOFER
Sub-menu Input level Volume
FRONT L/R CENTER SL/SR OUTPUT (50Hz)
1 FRONT: SMALL 0dB 1kHz Both ch, -20 dBm +6.0 dB +11.5 dBm -∞ -∞ -∞
2 CENTER: NONE 1kHz Both ch, -20 dBm +6.0 dB +8.9 dBm +7.5 dBm -∞ -∞
3 LFE/BASS: FRONT 50Hz Both ch, -20 dBm +6.0 dB -∞ -∞ -∞ +3.5 dBm
4 Presence Mix: 5ch 1kHz Both ch, -20 dBm +6.0 dB +11.5 dBm -∞ -∞ -∞
5 Surround B Power 1kHz Both ch, -20 dBm +6.0 dB -∞ -∞ -∞ -∞
(Not applied to these models.)
6 Tone Control Flat 1kHz Both ch, -20 dBm +6.0 dB +11.5 dBm +11.5 dBm +11.5 dBm -0.5 dBm
7 Tone Control +10dB 1kHz Both ch, -20 dBm +6.0 dB +13.4 dBm +11.5 dBm +11.5 dBm -0.5 dBm
8 Tone Control -10dB 1kHz Both ch, -20 dBm +6.0 dB +9.6 dBm +11.5 dBm +11.5 dBm -0.5 dBm

25
 RX-V357/HTR-5830

5. HP Test
The signal is output including the head margin.

FRONT 12dB MARGIN FRONT 15dB MARGIN

Reference data Reference data

INPUT: DVD ANALOG INPUT: DVD ANALOG
SWFR: 50Hz, Others: 1kHz SWFR: 50Hz, Others: 1kHz

SPEAKER OUTPUT (1kHz) SUBWOOFER SPEAKER OUTPUT (1kHz) SUBWOOFER

Input level Volume FRONT OUTPUT Input level Volume FRONT OUTPUT
L/R CENTER SL/SR (50Hz) L/R CENTER SL/SR (50Hz)
Both ch, -20 dBm +6.0 dB +11.5 dBm - ∞ -∞ -∞ Both ch, -20 dBm +6.0 dB +14.5 dBm -∞ -∞ -∞

Analog A/D AD or CS L/R

C/SW
Same as L/R
Same as
DIR "1. YSS" LS/RS "1. YSS"
(automatic (automatic
Digital C/LFE
SL/SR
selection) selection)
L/R

Main DSP Sub DSP

(Shaded items not used in this example)

6. OTHER INPUT
The signal input through the 6CH INPUT terminals is
output.

EXTERNAL DECODER

Reference data
INPUT: 6CH INPUT
SWFR: 50Hz, Others: 1kHz
SPEAKER OUTPUT (1kHz) SUBWOOFER
RX-V357/HTR-5830

Input level Volume FRONT OUTPUT

L/R CENTER SL/SR (50Hz)
Both ch, -20 dBm +6.0 dB +11.5 dBm +11.5 dBm +11.5 dBm -10.5 dBm

26
 RX-V357/HTR-5830

7. DISPLAY CHECK
This program is used to check the FL display section. The Segment conditions of the FL driver and the FL tube are
display condition varies as shown below according to the checked by turning ON and OFF all segments. Next, the
sub-menu operation. The signals are processed using operation of the FL driver is checked by using the dimmer
EFFECT OFF (The L/R signal is output using ANALOG control. Then a short between segments next to each
FRONT BYPASS.) other is checked by turning ON and OFF all segments
Regarding internal/external synchronization selection of alternately (in lattice). (In the example below, the
the image signals by the microprocessor control, the segments in the second row from the top are shorted.)
internal synchronization is selected when the initial display
is provided and when all FL's light up and the external
synchronization at any other time.
Also, except when the initial display is provided, 128
characters for confirmation of the OSD driver are
displayed as the image output.

Initial display / 初期表示 All segments OFF / 全セグメント消灯 All segments ON (dimmer 100%) /
全セグメント点灯（ディマー100%）

Lighting of segments All segments ON (dimmer 50%) /

Lighting in lattice / 格子状点灯
in lattice / 全セグメント点灯（ディマー50%）
セグメント格子状点灯

Short / ショート Normal / 正常

8. MANUAL TEST
The noise generator built into the DSP outputs the test
noise through the channels specified by the sub-menu.
The noise frequency for LFE is 35 to 250 Hz. Other than
that, the center frequency is 800Hz.

TEST ALL TEST FRONT L TEST CENTER

RX-V357/HTR-5830
Noise is output from all channels. Noise is output from the FRONT L Noise is output from the CENTER
channel. channel.

TEST FRONT R TEST SURROUND R TEST SURROUND C

Noise is output from the FRONT R Noise is output from the SURROUND R Not applied to these models.
channel. channel.

TEST SURROUND L TEST LFE

Noise is output from the SURROUND L Noise is output from the SUB WOOFER
channel. channel.

27
 RX-V357/HTR-5830

9. FACTORY PRESET
This menu is used to reserve and inhibit initialization of the
back-up RAM. The signals are processed using EFFECT
OFF. (The L/R signal is output using ANALOG FRONT
BYPASS.)

PRESET INHIBIT (Initialization inhibited)

RAM initialization is not executed. Select this sub-menu to protect the values set by the user.
The production history is not erased using this sub-menu.

PRESET RESERVED (Initialization reserved)

Initialization of the back-up RAM is reserved. (Actually, initialization is executed the next time
that the power is turned on.) Select this sub-menu to reset to the original factory settings or to
reset the RAM. The production history is not erased using this sub-menu.

CAUTION: Before setting to the PRESET RESERVED,

write down the existing preset memory
content of the Tuner in a table as shown
below. (This is because setting to the
PRESET RESERVED will cause the user
memory content to be erased.)

Preset group P1 P2 P3 P4 P5 P6 P7 P8

• PRESET STATIONS / プリセット局

STATION FM FACTORY PRESET DATA (MHz) STATION AM FACTORY PRESET DATA (kHz)
PAGE NO. U, C R, T, K, A, B, G, L, E PAGE NO. U, C, R T, K, A, B, G, L, E
1 87.5 87.5 1 630 630
2 90.1 90.1 2 1080 1080
3 95.1 95.1 3 1440 1440
4 98.1 98.10 4 530 531
A/C/E B/D
5 107.9 108.0 5 1710 1611
6 88.1 88.1 6 900 900
7 106.1 106.1 7 1350 1350
8 107.9 108.0 8 1400 1404
RX-V357/HTR-5830

28
 RX-V357/HTR-5830

10. AD DATA CHECK/FAN TEST K0/K1 (Panel key of main unit) (Reference: 5V=100%)
This menu is used to display the A/D conversion value of A/D of the key fails to function properly when the standard
the terminals which detects panel keys of the main unit value is deviated. In this case, check the constant of
and protection functions in % using the sub-menu. During partial pressure resistor, solder condition, etc. Refer to
signal processing, the condition before execution is table 1.
maintained.

* The figures in the diagram are given as reference only. [Table 1]

DC/PS (protection detection) U, C, R, T, K, A, L models
DC: DC protection value Display (%) K0 K1
0-6 6CH INPUT TUNING MODE
Normal value: 17 to 29 (Reference: 5V=100%) 7 - 13 INPUT SELECT RIGHT MEMORY
If DC is out of the normal value range, the protection 14 - 21 INPUT SELECT LEFT PRESET / TUNING
function works to turn off the power. 22 - 31 INPUT MODE PRESET / TUNING
32 - 41 PROGRAM A/B/C/D/E
PS: Power supply voltage protection value 42 - 53 PROGRAM FM/AM
54 - 63 BASS / TREBLE + PRESET / TUNING
Normal value: 8 to 26 (Reference: 5V=100%) 64 - 72 BASS / TREBLE - –
If PS is out of the normal value range, the protection 73 - 80 STEREO –
function works to turn off the power. 81 - 88 CONTROL –
89 - 95 SPEAKERS –
96-100 KEY OFF KEY OFF

THM/Fan (temperature detection/fan drive level) B, G, E models

THM: Temperature detection value Display (%) K0 K1
0-6 6CH INPUT TUNING MODE
Normal value: 30 to 147 (Reference: 5V=500%) 7 - 13 INPUT SELECT RIGHT MEMORY
If THM is out of the normal value range, the 14 - 21 INPUT SELECT LEFT PRESET / TUNING
protection function works to turn off the power. 22 - 31 INPUT MODE PRESET / TUNING
32 - 41 PROGRAM A/B/C/D/E
Fan: Current fan drive level on the left and the past fan 42 - 53 PROGRAM FM/AM
54 - 63 BASS / TREBLE + PRESET / TUNING
drive history on the right. 64 - 72 BASS / TREBLE - PTY SEEK MODE
(Not applied to these models.) 73 - 80 STEREO PTY SEEK START
81 - 88 CONTROL EON
89 - 95 SPEAKERS RDS MODE
96-100 KEY OFF KEY OFF
REC-OUT
Not applied to these models.
When K0/K1 menu is selected, keys become non-
operable due to detection of the values of all keys.
However, it is possible to advance to the next sub-
IMP SW/POWER LIMIT (Impedance/power limiter detection)
menu by turning the VOLUME of the main unit. When
IMP: 8 or 6 ohms impedance switch setting (U, C models)
using this function, note that turning the VOLUME more
PL: Power limiter detection value (Reference: 5.0V=255%) than 2 clicks will cause the volume value to change.
The voltage value of pin No. 91 of IC242 is displayed.
The port (pin No. 4 of IC242) output is controlled by
using the input voltage.
FAN DRIVE TEST (Not applied to these models.)
value of pin No. 91 of IC242.
HIGH
When higher than VthH, the port output is changed

RX-V357/HTR-5830
from H to L.
When lower than VthL, the port output is changed
from L to H. FAN DRIVE TEST (Not applied to these models.)
MID
Note:
Vth=Threshold voltage
Detection level
PORT VthL VthH FAN DRIVE TEST (Not applied to these models.)
2.41V 2.90V U, C models (8ohms)
No. 91 2.77V 3.25V U, C models (6ohms) LOW
2.87V 3.35V R, T, K, A, B, G, E, L models (6ohms)

Output level
PORT VthL VthH
3.82V 0V U, C models (8ohms)
No. 4 3.55V 0V U, C models (6ohms)
3.63V 0V R, T, K, A, B, G, E, L models (6ohms)

29
 RX-V357/HTR-5830

11. IF STATUS (Input function status)

Using the sub-menu, the status data is displayed one after
another in the hexadecimal notation. 5th byte
During signal processing, the status before execution of
4th byte
this menu is maintained.
3rd byte
* Numeric values in the figure example are for reference. 2nd byte
1st byte
IS1, 2 (Internal status):
Indicates the status information of the microprocessor.

3rd byte
2nd byte
1st byte

<1st byte> Digital input/output setting value

Upper 4 bits: REC OUT selected /
lower 4 bits: INPUT selected

Value Choice Preset name

0 NONE
1 OPTA
2 OPTB DTV/CBL
3 OPTC DVD
4 OPTD
6 OPTF
8 COAXA CD
9 COAXB

<2nd byte> Fs information of reproduction signal

Display 00 01 02 03 04 05 06 0A 0B 0C 0D
Fs (kHz) Analog 32 44.1 48 64 88.2 96 Unknown NRM Unknown DBL Unknown QUAD Not defined

<3rd byte> Audio code mode information of reproduction signal

Display 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D
Audio Code 1+1 1/0 2/0 3/0 2/1 3/1 2/2 3/2 2/3 3/3 OVER 6.1 MULTI MONO MULTI PCE Unknown

<4th byte> Format information of reproduction signal <5th byte> Signal processing status information
*1: Analog processing used for digital reproduction is not *2: With digital signals other than 32kHz, 44.1kHz and
possible because of a commercial bit or 4-ch audio 48kHz, through processing method is used for
RX-V357/HTR-5830

reason. reproducible signals.

Display Signal format bit7 MUTE request bit3 –

00 Analog (Unlock)
bit6 Red dts flashing bit2 Through & bypass (*2)
01 *1
10 PCM Audio bit5 6.1/EX processing bit1 –
20 Digital Data bit4 FULL MUTE (ON: 1) bit0 dts analog mute
21 IEC1937 Data
22 None PCM
23 Unknown
50 dts
51 Red dts
54 dts-ES MATRIX
58 dts-ES DISCRETE
5C dts-ES (Both flag)
60 AAC
C0 Dolby Digital
C1 D.D. Karaoke
C4 D.D.6.1 (D.D.EX)

30
 RX-V357/HTR-5830

CS1-5: Indicates channel status information of the input MTT: Mute Trigger
signal (IEC60958).

Byte No. Function

1 Mute condition
2 Factor of the last mute
BY1-4: Indicates information of the bit stream included in 3 Error count of YSS938-FSCNT
the DOLBY DIGITAL signal. 4 Mute count by YSS938-FSCNT
5 Error factor of down load of CS49329

BS1-5: Indicates information of the bit stream included in

12. DSP RAM CHECK
the dts signal.
This menu is used to self-diagnose whether or not the bus
connection for the YSS938 and the external RAM is made
properly.
During signal processing, the status before execution of
this menu is maintained.
YS1-3: Indicates device status information of YSS938
The address bus and the data bus are checked and the
(IC601).
connection condition is displayed.
* The numeric value in the figure is an example for
When no error is detected, "NoEr" appears on display.
reference.

YSS938 Bus Check

Byte No. Function

1 YSS MUTE Reg
2 YSS MODE Reg
Display Description
3 YSS IPORT BIT 7-0
4 YSS IPORT BIT 14-8 WAIT Bus is being checked.
5 YSS OPORT NoEr No error detected.
DATA Data bus shorted or open.
RSCS /RAS or /CAS shorted, or open.
ADDR Address bus shorted or open.

Byte No. Function

1 IEC 1937 Preamble Pc PLD / SRAM BUS CHECK
2 Data Stream Reg
3 Status Reg
4 YSS ZERO Reg
5 MIREG

Display Description
WAIT Bus is being checked.
None No error detected.
EDxx Data bus shorted or open. (XX: 00-07)

RX-V357/HTR-5830
Byte No. Function
1 DIR Status EAxx Address bus shorted or open. (XX: 00-0E)
2 DIR fs
3 DIR fs count
4 YSS ZERO BF

SD: CS49329 Unsolicited Messages

(AUTODETECT_RESPONSE)
(Not applied to these models.)

31
 RX-V357/HTR-5830

13. SD DL CODE 14. SOFT SW

This menu is used to display the data version of the This menu is used to switch the function settings on the
FLASH ROM, TOC information and sum calculated P.C.B. through the software so as to activate the product.
value for the second decoder. The protection function follows the P.C.B. settings. When
connected to AC or in the maker preset state, the unit is
RDV initialized to the P.C. B. setting. Display of each function
Displays the data version. after initialization varies depending on settings on P.C.B.
The operation mode can be changed by selecting the sub-
menu and then using the EFFECT key. With SOF selected
for the SW mode, the settings become effective.

TA 0-5 SW MODE: PCB or SOFT can be selected.

Displays the TOC information.

MODEL SETTING: V357 or V357T can be selected.

As there is no model to replace with, this mode is used the
SA 0-5 check for the T destination.
Displays the sum calculated value.

TUNER DESTINATION: UC, AKGTE or RL can be

selected.

TUNER: NOT or EXIST can be selected.

RDS: NOT or EXIST can be selected.

ZONE2: NOT or EXIST can be selected.

(Not applied to these models.)

VIDEO FORMAT: NTSC or PAL can be selected.

(Not applied to these models.)
RX-V357/HTR-5830

32
 RX-V357/HTR-5830

15. MICROPROCESSOR INFORMATION

The version, checksum and the port specified by the
microprocessor are displayed. The signal is processed
using EFFECT OFF. The checksum is obtained by adding
the data at every 8 bits for each program area and
expressing the result as a 4-figure hexadecimal data.

Version
Release 1 digit / Main version 2 digit / DSP version 2 digit

Checksum
A: All area

Check of port setting for judging microprocessor function

Display of AAC function detection port state

“PORT:0 0 0 0 0 0 0 0”
bit 7 6 5 4 3 2 1 0

Tuner mode 0 (*1)

Tuner mode 1 (*1)
Tuner with (1) / without (0)
RDS with (1) / without (0)
VIDEO format: PAL (1) / NTSC (0)
*1
Type Tuner mode Port 3 Frequency range
1 0 (type 2) FM AM
0 0 0 – 76.0-90.0MHz / 100kHz 531-1611kHz / 9kHz
1 1 0 – 87.5-108.0MHz / 50kHz 531-1611kHz / 9kHz
2 0 1 – 87.5-107.9MHz / 200kHz 530-1710kHz / 10kHz
3 1 1 Low 87.5-108.0MHz / 100kHz 530-1710kHz / 10kHz
High 87.5-108.0MHz / 50kHz 531-1611kHz / 9kHz

RX-V357/HTR-5830

33
 RX-V357/HTR-5830

■ CONFIRMATION OF IDLING CURRENT

Confirmation of Idling Current of MAIN (1) P. C. B.
• Right after the power is turned on, confirm that the
voltage across the terminals of R157 (FRONT Lch),
R158 (FRONT Rch), R148 (CENTER), R156
(SURROUND Lch), R159 (SURROUND Rch) are
between 0.1mV and 10.0mV.

0.1mV ~ 10.0mV
(DC)

R157 (FRONT Lch)

R158 (FRONT Rch)
R148 (CENTER)
R156 (SURROUND Lch)
R159 (SURROUND Rch)
RX-V357/HTR-5830

34
 RX-V357/HTR-5830

■ DISPLAY DATA
● V851 : 16-BT-122GNK (WC173100)
} 1

PATTERN AREA

● PIN CONNECTION

Pin No. 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35
Connection F2 F2 NP NP P1 P2 P3 P4 P5 P6 P7 P8 P9 P10 P11 P12 P13 P14 P15 P16 P17 P18 P19 P20 P21 P22 P23 P24 P25 P26 P27 P28 P29 P30 P31

Pin No. 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
Connection P32 P33 P34 P35 P36 P37 P38 NX NX NX NX NX NX NX 16G 15G 14G 13G 12G 11G 10G 9G 8G 7G 6G 5G 4G 3G 2G 1G NP NP F1 F1
Note : 1) F1, F2 ..... Filament 2) NP ..... No pin 3) NX ..... No extened 4) DL ..... Datum line 5) 1G ~ 16G ..... Grid

● GRID ASSIGNMENT

16G S21 1G 2G 3G 4G 5G 6G 7G 8G 9G 10G 11G 12G 13G 14G 15G

S1
1-1 2-1 3-1 4-1 5-1 S9

1-2 2-2 3-2 4-2 5-2

1a 2f 2a S1 S6
1f 1b 2b
1g 2g S5
1-3 2-3 3-3 4-3 5-3
S10 S11 S12 S13 S14 S15 1e 1c 2c S6 S1
1-4 2-4 3-4 4-4 5-4 (16G) S17 1d 2e 2d
S16
1-5 2-5 3-5 4-5 5-5 S7
S18 S19
S1

RX-V357/HTR-5830
1-6 2-6 3-6 4-6 5-6 S20
(16G)
1-7 2-7 3-7 4-7 5-7 S8
S2 S3 S4
(1G~14G) (15G)

35
 RX-V357/HTR-5830

● ANODE CONNECTION
16G 15G 14G 13G 12G 11G 10G 9G~5G 4G 3G 2G 1G
P1 S1 1-1 1-1 1-1 1-1 1-1 1-1 1-1 1-1 1-1 1-1
P2 S7 2-1 2-1 2-1 2-1 2-1 2-1 2-1 2-1 2-1 2-1
P3 S8 3-1 3-1 3-1 3-1 3-1 3-1 3-1 3-1 3-1 3-1
P4 4-1 4-1 4-1 4-1 4-1 4-1 4-1 4-1 4-1 4-1
P5 1a 5-1 5-1 5-1 5-1 5-1 5-1 5-1 5-1 5-1 5-1
P6 1b 1-2 1-2 1-2 1-2 1-2 1-2 1-2 1-2 1-2 1-2
P7 1c 2-2 2-2 2-2 2-2 2-2 2-2 2-2 2-2 2-2 2-2
P8 1d 3-2 3-2 3-2 3-2 3-2 3-2 3-2 3-2 3-2 3-2
P9 1e 4-2 4-2 4-2 4-2 4-2 4-2 4-2 4-2 4-2 4-2
P10 1f 5-2 5-2 5-2 5-2 5-2 5-2 5-2 5-2 5-2 5-2
P11 1g 1-3 1-3 1-3 1-3 1-3 1-3 1-3 1-3 1-3 1-3
P12 2a 2-3 2-3 2-3 2-3 2-3 2-3 2-3 2-3 2-3 2-3
P13 2b 3-3 3-3 3-3 3-3 3-3 3-3 3-3 3-3 3-3 3-3
P14 2c 4-3 4-3 4-3 4-3 4-3 4-3 4-3 4-3 4-3 4-3
P15 2d 5-3 5-3 5-3 5-3 5-3 5-3 5-3 5-3 5-3 5-3
P16 2e 1-4 1-4 1-4 1-4 1-4 1-4 1-4 1-4 1-4 1-4
P17 2f 2-4 2-4 2-4 2-4 2-4 2-4 2-4 2-4 2-4 2-4
P18 2g 3-4 3-4 3-4 3-4 3-4 3-4 3-4 3-4 3-4 3-4
P19 S5 4-4 4-4 4-4 4-4 4-4 4-4 4-4 4-4 4-4 4-4
P20 S6 5-4 5-4 5-4 5-4 5-4 5-4 5-4 5-4 5-4 5-4
P21 S16 1-5 1-5 1-5 1-5 1-5 1-5 1-5 1-5 1-5 1-5
P22 S17 S2 2-5 2-5 2-5 2-5 2-5 2-5 2-5 2-5 2-5 2-5
P23 S18 S3 3-5 3-5 3-5 3-5 3-5 3-5 3-5 3-5 3-5 3-5
P24 S19 S4 4-5 4-5 4-5 4-5 4-5 4-5 4-5 4-5 4-5 4-5
P25 S20 5-5 5-5 5-5 5-5 5-5 5-5 5-5 5-5 5-5 5-5
P26 S9 1-6 1-6 1-6 1-6 1-6 1-6 1-6 1-6 1-6 1-6
P27 2-6 2-6 2-6 2-6 2-6 2-6 2-6 2-6 2-6 2-6
P28 3-6 3-6 3-6 3-6 3-6 3-6 3-6 3-6 3-6 3-6
P29 S10 4-6 4-6 4-6 4-6 4-6 4-6 4-6 4-6 4-6 4-6
P30 S11 5-6 5-6 5-6 5-6 5-6 5-6 5-6 5-6 5-6 5-6
P31 S12 1-7 1-7 1-7 1-7 1-7 1-7 1-7 1-7 1-7 1-7
RX-V357/HTR-5830

P32 S13 2-7 2-7 2-7 2-7 2-7 2-7 2-7 2-7 2-7 2-7
P33 S14 3-7 3-7 3-7 3-7 3-7 3-7 3-7 3-7 3-7 3-7
P34 4-7 4-7 4-7 4-7 4-7 4-7 4-7 4-7 4-7 4-7
P35 5-7 5-7 5-7 5-7 5-7 5-7 5-7 5-7 5-7 5-7
P36 S15 – – – S21
P37 – – – – – – – –
P38 – – – – – – – – –

36
 RX-V357/HTR-5830

■ IC DATA
IC242: M30626FHPFP (MAIN P.C.B.)

P15/D13/INT3
P16/D14/INT4
P17/D15/INT5
16bit µ-COM (Main CPU)

P12/D10

P14/D12

P32/A10

P34/A12
P35/A13
P36/A14
P37/A15
P40/A16
P41/A17
P42/A18
P43/A19
P13/D11

P33/A11
P10/D8

P20/A0
P21/A1
P22/A2
P23/A3
P24/A4
P25/A5
P26/A6
P27/A7

P30/A8

P31/A9
P11/D9

VCC
VSS
80
79
78
77
76
75
74
73
72
71
70
69
68
67
66
65
64
63
62
61
60
59
58
57
56
55
54
53
52
51
P07/D7 81 50 P44/CS0
P06/D6 82 49 P45/CS1
P05/D5 83 48 P46/CS2
P04/D4 84 47 P47/CS3
P03/D3 85 46 P50/WRL/WR
P02/D2 86 45 P51/WRH/BHE
P01/D1 87 44 P52/RD
P00/D0 88 43 P53/BCLK
P107/AN7 89 42 P54/HLDA
P106/AN6 90 41 P55/HOLD
P105/AN5 91 40 P56/ALE
P104/AN4 92 39 P57/RDY/CLKOUT
P103/AN3 93 38 P60/CTS0/RTS0
P102/AN2 94 37 P61/CLK0
P101/AN1 95 36 P62/RXD0
AVSS 96 35 P63/TXD0
P100/AN0 97 34 P64/CTS1/RTS1/CTS0/CLKS1
VREF 98 33 P65/CLK1
AVCC 99 32 P66/RXD1
P97/ADTRG/SIN4 100 31 P67/TXD1

10

12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
11
1
2
3
4
5
6
7
8
9
P96/ANEX1/SOUT4
P95/ANEX0/CLK4
P94/DA1/TB4IN
P93/DA0/TB3IN
P92/TB2IN/SOUT3
P91/TB1IN/SIN3
P90/TB0IN/CLK3
BYTE
CNVSS
P87/XCIN
P86/XCOUT
RESET
XOUT
VSS
XIN
VCC
P85/NMI
P84/INT2
P83/INT1
P82/INT0
P81/TA4IN/U
P80/TA4OUT/U
P77/TA3IN
P76/TA3OUT
P75/TA2IN/W
P74/TA2OUT/W
P73/CTS2/RTS2/TA1IN/V
P72/CLK2/TA1OUT/V
P71/RXD2/SCL/TA0IN/TB5IN
P70/TXD2/SDA/TA0OUT
No. Port No. Function name I/O Detail of function
1 SOUT4 DTFD SO FL Driver TxD
2 CLK4 CKFD SCK FL Driver CLOCK
3 P94 /BLK O FL Driver OFF
4 P93 LIMB O Power Limiter Control
5 SOUT3 SDM SO YSS938 TxD
6 SIN3 SDD SI YSS938 RxD
7 CLK3 YSSCK SCK YSS938 CLOCK
8 BYTE BYTE VSS Vss: when single chip mode is used
9 CNVss CNVss Vss/Vcc Vss: when single chip mode is used, Vcc: when flash writing is used
10 P87 CSY O YSS938 CE
11 P86 /ICD O YSS938/DA/AD/CODEC/DEM
12 RESET RESET I Reset
13 Xout Xout Oscillator Out
14 Vss Vss Vss µ-COM Ground
15 Xin Xin 16MHz Oscillator in
16 Vcc Vcc Vcc (BU) µ-COM power supply, +5V
17 NMI NMI Vcc (BU) Connect to Vcc because it is unused.
18 INT2 INT938 INT YSS938 IPINT/MUTE/DIR
19 INT1 PSW INT Standby SW Input
20 INT0 REM1 INT Remote Control Input
21 P81 I Open (Unconnected)

RX-V357/HTR-5830
22 P80 O Open (Unconnected)
23 P77 /HP I (IPU) Headphone Detect
24 P76 VRA I (IPU) Volume Rotary A
25 P75 VRB I (IPU) Volume Rotary B
26 P74 CSN O Chip Select for DAC (Unconnected)
27 P73 /ICCDC O CODEC Reset
28 CLK2 O Open (Unconnected)
29 P71 O Open (Unconnected)
30 TXD2 O Open (Unconnected)
31 TXD1 TXDF FLASH Flash ROM Serial Write Data Transmission
32 RXD1 RXDF FLASH Flash ROM Serial Write Data Reception
33 CLK1 CLKF FLASH Flash ROM Serial Clock
34 P64 BSY FLASH Flash BUSY Signal Output
35 TXD0 IMP I IMPEDANCE Select SW detection
36 RXD0 5/6 SI Open (Unconnected)
37 CLK0 CLK Open (Unconnected)
38 P60 /CEEEP O EEPROM CE
39 P57 SDTR O RDS/OSD TxD
40 P56 SDRR/DEST SI/I (IPU) RDS RxD / Frequency SW (Dest R)
41 P55 /EMP GND For Flash Writing (LO)
42 P54 SCKR SCK RDS/OSD Clock
43 P53 O Open (Unconnected)
37
 RX-V357/HTR-5830

IC242: M30626FHPFP (MAIN P.C.B.)

16bit µ-COM (Main CPU)
No. Port No. Function name I/O Detail of function
44 P52 O Open (Unconnected)
45 P51 O Open (Unconnected)
46 P50 /CE I For Flash Writing (HI)
47 P47 I/O Open (Unconnected)
48 P46 /MMT O Mute Front
49 P45 /CMT O Mute Center
50 P44 /SMT O Mute Surround
51 P43 /MTSW O Mute LFE
52 P42 O Open (Unconnected)
53 P41 HPRY O Headphone SP Relay Output
54 P40 O Open (Unconnected)
55 P37 /GAIN O Gain
56 P36 BD_MUTE O BD3816 Mute
57 P35 HPF O HPF
58 P34 BD_CLK O Clock Line for BD38xx System Control
59 P33 BD_DAT O Data Line for BD38xx System Control
60 P32 VIA O Video Selector A
61 P31 VIB O Video Selector B
62 Vcc Vcc Vcc (BU) µ-COM Power Supply, +5V
63 P30 O Open (Unconnected)
64 Vss Vss Vss µ-COM Ground
65 P27 /VR1 O Video Rec Out Selector 1
66 P26 O Open (Unconnected)
67 P25 CMP0 O Compornent Selector 0
68 P24 CMP1 O Compornent Selector 1
69 P23 O Open (Unconnected)
70 P22 O/I Open (Unconnected)
71 P21 O Open (Unconnected)
72 P20 RDSE O/I RDS Enable, RDS Present/Absent
73 P17 CEP/TUN1 O/I PLL IC Enable/Destination Discriminate 1
74 INT4 PDET INT Power Down Detect INT
75 INT3 5M SW INT 5M Switch Output
76 P14 SCKP/TUN0 O/I PLL IC Clock/Destination Discriminate 0
77 P13 SDTP O PLL IC TxD
78 P12 SDRP I (IPU) PLL IC RxD
79 P11 TUNED I (IPU) Tuned
80 P10 /ST I (IPU) Tuner/ST
81 P07 TMT O Tuner Mute
82 P06 PRY O Power Relay Output
83 P05 CSRY O Surround SP Relay Output
84 P04 MARYB O Front B SP Relay Output
85 P03 MARYA O Front A SP Relay Output
86 P02 PRI I Protection Excess Current Detect
87 P01 LIMA O Open (Unconnected)
88 P00 O Open (Unconnected)
89 AN7 MODEL AD Connection Discriminate
90 AN6 PRD AD Protection DC Detect
91 AN5 PREMT AD Power Limiter Detect
92 AN4 THM AD Temperature Detect
93 AN3 AD Open (Unconnected)
94 AN2 ADKEY0 AD Key AD Input 0
95 AN1 ADKEY1 AD Key AD Input 1
96 Avss Avss Vss AD Ground
RX-V357/HTR-5830

97 AN0 PRV AD Protection Power Supply Voltage Detect

98 Vref VREF (+5v) AD Reference
99 Avcc AVcc Vcc (BU) AD Power Supply
100 P97 CEFD O FL Driver CE

Key Input (A-D) Pull-Up Resistance 10 k-ohms

U, C, R, T, K, A, L models
Ohm 0.0 +1.0k +1.0k +1.5k +2.2k +3.3k +4.7k +6.8k +10.0k +22.0k +47.0k
V 0.0~0.3 ~0.65 ~1.05 ~1.55 ~2.05 ~2.65 ~3.15 ~3.6 ~4.0 ~4.4 ~4.75
ADKEY0 INPUT INPUT INPUT PROGRAM PROGRAM BASS/TREBLE BASS/TREBLE STEREO/ SPEAKERS
6CH INPUT TONE CONTROL
(94Pin, AN2) > < MODE > < + – EFFECT A/B/OFF
ADKEY1 PRESET/TUNING PRESET/TUNING A/B/C/D/E PRESET/TUNING
TUNING MODE MEMORY FM/AM – – – –
(95Pin, AN1) > < /NEXT /EDIT

B, G, E models
Ohm 0.0 +1.0k +1.0k +1.5k +2.2k +3.3k +4.7k +6.8k +10.0k +22.0k +47.0k
V 0.0~0.3 ~0.65 ~1.05 ~1.55 ~2.05 ~2.65 ~3.15 ~3.6 ~4.0 ~4.4 ~4.75
ADKEY0 INPUT INPUT INPUT PROGRAM PROGRAM BASS/TREBLE BASS/TREBLE STEREO/ SPEAKERS
6CH INPUT TONE CONTROL
(94Pin, AN2) > < MODE > < + - EFFECT A/B/OFF
ADKEY1 PRESET/TUNING PRESET/TUNING A/B/C/D/E PRESET/TUNING PTY SEEK PTY SEEK
TUNING MODE MEMORY FM/AM EON RDS MODE/FREQ
(95Pin, AN1) > < /NEXT /EDIT MODE START
38
 DSP

SELOB
SELOA
SDBCKI1
SDWCKI1
SDOB0
SDOB1
SDOB2
SDOB3
SELI0-13 SDOB Interface ZEROBF3R-0L

SELB SELA
SDOBCKSEL
END
OVFB/END
OVFB

OVFSEL
Sub DSP

RAM
RAMA0-17

Program
RAMOEN

Coefficient,
IC801 : YSS938 (DSP P.C.B.)

RAMWEN

SDIB2
SDIB3
SDOA2
SDOA1
SDOA2
SDIA
IPORT11
IPORT10
IPORT9
IPORT8
/SDBCKO
SDBCKI0
SDWCKI0
VDD1
TESTR2
TESTR1
TESTBRK
AVSS
DIRPRO
DIRPCO
AVDD
CPO
VSS
DDIN3
DDIN2
DDIN1
DDIN0
IPORT4
IPORT3
IPORT2
IPORT1
IPORT0
TESTXEN
TESTMS
SELOB
SELOA
SELI0
SELI1
XI
XO

RASN

Memory
External
Interface
CASN
RAMD0-15
9
8
7
6
5
4
3
2
1

40
39
38
37
36
35
34
33
32
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10

SDIB Interface SDIB1 41 160 VDD2

MPLOAD
SDIB0 42 159 TESTXO

SDIBCKSEL
VSS 43 158 TESTXI
VDD2 44 157 SELI2
SDIBSEL IPORT12 45 156 SELI3
SDIB3 IPORT13 46 155 VSS
SDIB2 IPORT14 47 154 SELI4
OPORT0-7 SDIB1 DIRSDO 48 153 IPINT
SDIB0 DIRWCK 49 152 /IC
C, LFE SDOA2
SDOA1 DIRBCK 50 151 SCK
LS, RS
L, R SDOA0 DIRMCK 51 150 SI
SCK ERR/BS 52 149 SO
DSP Clock
SDDA Interface (30 MHz) SYNC/U 53 148 /CS
SI
FS128/C 54 147 DIRINT
So DBL/V 55 146 /LOCK
CPO SDWCKI1 56 145 CRC
/cs XO
PLL SDBCKI1 57 144 SURENC

µ-COM Interface
XI
VSS 58 143 VDD1
Main DSP

Control Register
(AC-3/ProLogic/DTS Decoder) SDOB3 59 142 KARAOKE
SDOB2 60 141 MUTE

Control Signals
IPINT ZEROFLG
NONPCM SDOB1 61 140 AC3DATA
IPORT8-14 DTSDATA SDOB0 62 139 DTSDATA
AC3DATA VDD1 63 138 NONPCM
IPORT0-4 CRC CRC
MUTE ZEROBF3R 64 137 VSS
ZEROBF3L 65 136 ZEROFLG
YSS938

SDIA Interface KARAOKE

/SDBCKO SURNEC ZEROBF2R 66 135 OVFB/END
ZEROBF2L 67 134 RAMA17
OPORT0 68 133 RAMA16
SDIACKSEL SDIASEL OPORT1 69 132 RAMA15
OPORT2 70 131 RAMA14
SDWCKI0 SDIA OPORT3 71 130 RAMA13
SDBCKI0 DIRSDO OPORT4 72 129 RAMA12
OPORT5 73 128 SELI5
DIRWCK DIRO Interface OPORT6 74 127 SELI6
DIRBCK 75 126
Clock at DIR OPORT7 SELI7
DIRMCK (25 MHz) VSS 76 125 SELI8
VDD2 77 124 VDD2
RAMD0 78 123 VSS
DIR PLL DIRPRO
RAMD1 79 122 RAMA11

C
FS128
U
SYNC
BS
ERR
V
DIRPCO
RAMD2 80 121 RAMA10
DBL
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120

CMOD UMOD DDINSEL BSMOD VMOD

VSS
VSS

VDD1
VDD1
SELI9

CASN
RASN

IPORT5-7 5 6 7
SELI13
SELI12
SELI11
SELI10

RAMA8
RAMA7
RAMA0
RAMA6
RAMA1
RAMA5
RAMA2
RAMA4
RAMA3
RAMA9

RAMD3
RAMD4
RAMD5
RAMD6
RAMD7
RAMD8
RAMD9
RAMD10
RAMD11
RAMD12
RAMD13
RAMD14
RAMD15
RAMOEN
RAMWEN

ZEROBF1L
ZEROBF0L

ZEROBF1R
ZEROBF0R

DBL/V

DDIN0
DDIN1
DDIN2
DDIN3
/LOCK

DIRINT
ERR/BS

SYNC/U

FS128/C
RX-V357/HTR-5830

39
RX-V357/HTR-5830
 RX-V357/HTR-5830

IC801 : YSS938 (DSP P.C.B.)

DSP
No. Name I/O Function
1 XO O Crystal oscillator connecting terminal
2 XI I Crystal oscillator connecting terminal (24.576MHz)
3 SELI1 I+ Built-in selector input 1 (AXD) (Unconnected)
4 SELI0 I+ Built-in selector input 0 (GND)
5 SELOA O+ Built-in selector output A (ISEL)
6 SELOB O+ Built-in selector output B (RSEL) (Unconnected)
7 TESTMS I+ Test terminal (Unconnected)
8 TESTXEN I+ Test terminal (Unconnected)
9 IPORT0 I+ General purpose input terminal (CXDTA)
10 IPORT1 I+ General purpose input terminal (CXDTB)
11 IPORT2 I+ General purpose input terminal
12 IPORT3 I+ General purpose input terminal
13 IPORT4 I+ General purpose input terminal
14 DDIN0 Is DIR: Digital audio interface data input terminal 0 (ISEL)
15 DDIN1 Is DIR: Digital audio interface data input terminal 1/General purpose input terminal (Pull down)
16 DDIN2 Is DIR: Digital audio interface data input terminal 2/General purpose input terminal (Pull down)
17 DDIN3 Is DIR: Digital audio interface data input terminal 3/General purpose input terminal (Pull down)
18 VSS Ground terminal
19 CPO A PLL filter connecting terminal
20 AVDD +3.3V power terminal (for DIR)
21 DIRPCO A DIR: PLL filter connecting terminal
22 DIRPRO A DIR: PLL filter connecting terminal
23 AVSS Ground terminal (for DIR)
24 TESTBRK I+ Test terminal (Unconnected)
25 TESTR1 I+ PLL initialization signal input terminal for DSP (/ICD)
26 TESTR2 I+ Test terminal (Unconnected)
27 VDD1 +3.3V power terminal (for terminal section)
28 SDWCKI0 I+ Word clock input terminal for SDIA, SDOA, SDIB, SDOB interface (WCKG) (Unconnected)
29 SDBCKI0 I+ Bit clock input terminal for SDIA, SDOA, SDIB, SDOB interface (BCKG) (Unconnected)
30 /SDBCK0 O DIRBCK or SDBCKI0 invert clock output terminal (Unconnected)
31 IPORT8 I+ IPINT general purpose input terminal
32 IPORT9 I+ IPINT general purpose input terminal (NONPCM)
33 IPORT10 I+ IPINT general purpose input terminal (NONPCM)
34 IPORT11 I+ IPINT general purpose input terminal (MUTE)
35 SDIA I AC-3/DTS bit stream (or PCM) data input terminal to Main DSP (SDIA)
36 SDOA2 O PCM output terminal from Main DSP (C/LFE output) (Unconnected)
37 SDOA1 O PCM output terminal from Main DSP (LS/RS output) (Unconnected)
38 SDOA0 O PCM output terminal from Main DSP (L/R output) (Unconnected)
39 SDIB3 I+ PCM input terminal 3 to Sub DSP (Unconnected)
40 SDIB2 I+ PCM input terminal 2 to Sub DSP (Unconnected)
RX-V357/HTR-5830

41 SDIB1 I+ PCM input terminal 1 to Sub DSP (Unconnected)

42 SDIB0 I+ PCM input terminal 0 to Sub DSP (Unconnected)
43 VSS Ground terminal
44 VDD2 +2.5V power terminal (for internal circuit)
45 IPORT12 I+ IPINT general purpose input terminal (DIRINT)
46 IPORT13 I+ IPINT general purpose input terminal (DBL)
47 IPORT14 I+ IPINT general purpose input terminal (DBL)
48 DIRSDO O AC-3/DTS bit stream (or PCM) data output terminal from DIR (Unconnected)
49 DIRWCK O DIR: Serial data word clock (fs) output terminal (WCK)
50 DIRBCK O DIR: Serial data bit clock (64fs) output terminal (BCK)
51 DIRMCK O DIR: Serial data master clock (256fs or 128fs) output terminal (MCK)
52 ERR/BS O DIR: Data error detect output/block start output terminal (Unconnected)
53 SYNC/U O DIR: Serial data synchronous timing output/user data output terminal (Unconnected)
54 FS128/C O DIR: Serial data master clock 128fs output/channel status output terminal (FS128) (Unconnected)
55 DBL/V O DIR: Double rate clock output/validity flag output terminal (DBL)

40
 RX-V357/HTR-5830

IC801 : YSS938 (DSP P.C.B.)

DSP
No. Name I/O Function
56 SDWCKI1 I+ Word clock input terminal for SDIB, SDOB interface (WCKG) (Unconnected)
57 SDBCKI1 I+ Bit clock input terminal for SDIB, SDOB interface (BCKG) (Unconnected)
58 VSS Ground terminal
59 SDOB3 O PCM output terminal from Sub DSP
60 SDOB2 O PCM output terminal from Sub DSP
61 SDOB1 O PCM output terminal from Sub DSP
62 SDOB0 O PCM output terminal from Sub DSP
63 VDD1 +3.3V power terminal (for terminal section)
64 ZEROBF3R O+ SDOB3 Rch zero flag output terminal (ZF3R) (Unconnected)
65 ZEROBF3L O+ SDOB3 Lch zero flag output terminal (ZF3L) (Unconnected)
66 ZEROBF2R O+ SDOB2 Rch zero flag output terminal (ZF2R) (Unconnected)
67 ZEROBF2L O+ SDOB2 Lch zero flag output terminal (ZF2L) (Unconnected)
68 OPORT0 O General purpose output terminal (/RINH1) (Unconnected)
69 OPORT1 O General purpose output terminal (/RINH2) (Unconnected)
70 OPORT2 O General purpose output terminal (/ICDA)
71 OPORT3 O General purpose output terminal (/ICAD) (Unconnected)
72 OPORT4 O General purpose output terminal (DPS)
73 OPORT5 O General purpose output terminal (RST) (Unconnected)
74 OPORT6 O General purpose output terminal (ERROR) (Unconnected)
75 OPORT7 O General purpose output terminal (/PRST) (Unconnected)
76 VSS Ground terminal
77 VDD2 +2.5V power terminal (for internal circuit)
78 RAMD0 I+/O Sub DSP: External memory data terminal 0
79 RAMD1 I+/O Sub DSP: External memory data terminal 1
80 RAMD2 I+/O Sub DSP: External memory data terminal 2
81 RAMD3 I+/O Sub DSP: External memory data terminal 3
82 ZEROBF0R O+ SDOB1 Rch zero flag output terminal (ZF1R) (Unconnected)
83 ZEROBF0L O+ SDOB1 Lch zero flag output terminal (ZF1L) (Unconnected)
84 ZEROBF0R O+ SDOB0 Rch zero flag output terminal (ZF0R) (Unconnected)
85 ZEROBF0L O+ SDOB0 Lch zero flag output terminal (ZF0L) (Unconnected)
86 RAMD4 I+/O Sub DSP: External memory data terminal 4
87 RAMD5 I+/O Sub DSP: External memory data terminal 5
88 RAMD6 I+/O Sub DSP: External memory data terminal 6
89 RAMD7 I+/O Sub DSP: External memory data terminal 7
90 VSS Ground terminal
91 VDD1 +3.3V power terminal (for terminal section)
92 RAMD8 I+/O Sub DSP: External memory data terminal 8
93 RAMD9 I+/O Sub DSP: External memory data terminal 9
94 RAMD10 I+/O Sub DSP: External memory data terminal 10
95 RAMD11 I+/O Sub DSP: External memory data terminal 11

RX-V357/HTR-5830
96 RAMD12 I+/O Sub DSP: External memory data terminal 12
97 RAMD13 I+/O Sub DSP: External memory data terminal 13
98 RAMD14 I+/O Sub DSP: External memory data terminal 14
99 RAMD15 I+/O Sub DSP: External memory data terminal 15
100 CASN O Sub DSP: Column address strobe output terminal for external DRAM
101 RAMWEN O Sub DSP: Write enable terminal for external memory
102 RAMOEN O Sub DSP: Output enable terminal for external memory
103 RASN O Sub DSP: Low address strobe output terminal for external DRAM
104 VSS Ground terminal
105 VDD1 +3.3V power terminal (for terminal section)
106 RAMA8 O Sub DSP: External memory address terminal 8
107 RAMA7 O Sub DSP: External memory address terminal 7
108 RAMA0 O Sub DSP: External memory address terminal 0
109 RAMA6 O Sub DSP: External memory address terminal 6
110 RAMA1 O Sub DSP: External memory address terminal 1

41
 RX-V357/HTR-5830

IC801 : YSS938 (DSP P.C.B.)

DSP
No. Name I/O Function
111 RAMA5 O Sub DSP: External memory address terminal 5
112 RAMA2 O Sub DSP: External memory address terminal 2
113 SELI13 I+ Built-in selector input 13 (Unconnected)
114 SELI12 I+ Built-in selector input 12 (Unconnected)
115 SELI11 I+ Built-in selector input 11 (Unconnected)
116 SELI10 I+ Built-in selector input 10 (Unconnected)
117 SELI9 I+ Built-in selector input 9 (CXB) (Unconnected)
118 RAMA4 O Sub DSP: External memory address terminal 4
119 RAMA3 O Sub DSP: External memory address terminal 3
120 RAMA9 O Sub DSP: External memory address terminal 9 (Unconnected)
121 RAMA10 O Sub DSP: External memory address terminal 10 (Unconnected)
122 RAMA11 O Sub DSP: External memory address terminal 11 (Unconnected)
123 VSS Ground terminal
124 VDD2 +2.5V power terminal (for internal circuit)
125 SELI8 I+ Built-in selector input 8 (CXA)
126 SELI7 I+ Built-in selector input 7 (GND)
127 SELI6 I+ Built-in selector input 6 (OPTF) (Unconnected)
128 SELI5 I+ Built-in selector input 5 (Unconnected)
129 RAMA12 O Sub DSP: External memory address terminal 12 (Unconnected)
130 RAMA13 O Sub DSP: External memory address terminal 13 (Unconnected)
131 RAMA14 O Sub DSP: External memory address terminal 14 (Unconnected)
132 RAMA15 O Sub DSP: External memory address terminal 15 (Unconnected)
133 RAMA16 O Sub DSP: External memory address terminal 16 (Unconnected)
134 RAMA17 O Sub DSP: External memory address terminal 17 (Unconnected)
135 OVFB/END O Sub DSP: Overflow/program end detect terminal (Unconnected)
136 ZEROFLG O Main DSP: Zero flag output terminal (Unconnected)
137 VSS Ground terminal
138 NONPCM O Main DSP: Non-PCM data detect terminal
139 DTSDATA O Main DSP: DTS data detect terminal (Unconnected)
140 AC3DATA O Main DSP: AC3 data detect terminal (Unconnected)
141 MUTE O Main DSP: Auto mute detect terminal
142 KARAOKE O Main DSP: AC3 KARAOKE data detect terminal (Unconnected)
143 VDD1 +3.3V Power terminal (for terminal section)
144 SURENC O Main DSP: AC-3 2/0 mode Dolby surround encode input detect terminal (Unconnected)
145 CRC O Main DSP: AC3 CRC error detect terminal (Unconnected)
146 /LOCK O DIR: PLL lock detect terminal (Unconnected)
147 DIRINT O DIR: Interrupt output terminal
148 /CS Is Microprocessor interface chip select input terminal (/CSY)
149 SO Ot Microprocessor interface data output terminal (SDDY)
150 SI Is Microprocessor interface data input terminal (SDMYB)
RX-V357/HTR-5830

151 SCK Is Microprocessor interface clock input terminal (SCKYB)

152 /IC Is Initial clear input terminal (/ICYP)
153 IPINT O+ Interrupt output terminal by IPORT 8-14
154 SELI4 I+ Built-in selector input 4 (OPTD) (Unconnected)
155 VSS Ground terminal
156 SELI3 I+ Built-in selector input 3 (OPTC)
157 SELI2 I+ Built-in selector input 2 (OPTB)
158 TESTXI I Test terminal (should be always connected to VSS)
159 TESTXO O Test terminal (Unconnected)
160 VDD2 +2.5V Power terminal (for internal circuit)

Is: Schmidt trigger input terminal

I+: Input terminal with pull-up resistor
O: Digital output terminal
Ot: 3-state digital output terminal
A: Analog terminal

42
 A B C D E F G H I J
RX-V357/HTR-5830

1
■ PRINTED CIRCUIT BOARD (Foil side)
DIGITAL INPUT
COAXIAL OPTICAL
DTV 2
CD 3
/CBL DVD 1

DSP P. C. B. (Side A) DSP P. C. B. (Side B)

Lead Free Solder Used Lead Free Solder Used
2

1 14

1 14
7 8

7 8

3
20 21

121 160
120 1

MAIN (1)
CB247

1 40
SDM
4 SDD
YSSCK
81 40 CSY
80 41 /ICD
INT938
/ICCDC
+5D2
+5D1

VRB
1 3 VRA
REM1
1 11 PSW
44 12 /BLK
1 5 CKFD
DTFD
5 CEFD
34 22 ADKEY1
33 23 ADKEY0
+5MS
MG
+5M
VP
ADL
ADR
E
DAL
E
DAR • Semiconductor Location
E
C
SW
RL
MAIN (1) Ref. no. Location
RR CB249 D801 G3
D802 G3
D803 C5
6 D804 C5
FUNCTION (1) D805 B4
CB453 D806 B5
D807 H5
D808 D5
D809 H6
VRB
REM1
/BLK
DTFD
ADKEY1
+5MS
MG

D810 D6
IC801 C4
IC802 B4
VRA
PSW
CKFD
CEFD
ADKEY0
VP
+5M

IC803 D5
IC804 C5
IC805 B5
FUNCTION (2) IC806 H3
7 CB551 IC807 G3

43
 A B C D E F G H I J K
RX-V357/HTR-5830

1
■ PRINTED CIRCUIT BOARD (Foil side)
6 CH INPUT AUDIO
MD
CENTER/ /CD-R
IN OUT
FRONT SURROUND SUB CD
(PLAY) (REC)
WOOFER
FUNCTION (1) P. C. B. (Side B)
FUNCTION (1) P. C. B. (Side A)
Lead Free Solder Used
2

3
DVR
DVL
E
DTR
DTL
E
AXR
AXL
E
VIR
VIL
E
VOR
VOL
E
SWMT
E
SW

80
1
TUR
TUL
4 E

64 65
BD_DATA
FUNCTION (6) BD_CLK

25 24
CB677 BD_MUTE
NC
SWMT
-12

4
+12
GAIN

40
41
HPF

1
5 MAIN (1)
CB244

4
DSP

1
CB803

ADFL SR
ADFR
E E
DAFL SL
E
DAFR E
6 • Semiconductor Location E
DAC C
Ref. no. Location DASW E
DASL FR
D451 I3 DASR
E
D452 I4

4
FL
IC451 I4

4
IC452 H5

4
IC453 H5

1
IC454 H6
IC455 I7

1
IC456 H6
Q451 E3
MAIN (1)
CB101
Q452 E4
Q453 I6
7 Q454 I6
Q455 I6
Q456 I6

44
 A B C D E F G H I J
RX-V357/HTR-5830

1
■ PRINTED CIRCUIT BOARD (Foil side)
FUNCTION (2) P. C. B. (Side A) FUNCTION (4)
CB653

AC4
NC
AC4

B, G, E models only
2
FUNCTION (5)
CB671
VOLUME
EON FREQ/TEXT

E
+5M
PSW
START MODE
PTYSEEK

3
TUNING MODE MEMORY + - A/B/C/D/E FM/AM PRESET/TUNING
AUTO/MAN'L MONO MAN'L/AUTO FM PRESET/TUNING NEXT EDIT
SET MENU
VRB
VRA
REM1
PSW
/BLK
CKFD
DTFD
CEFD
ADKEY1
ADKEY0
VP
+5MS PROGRAM STEREO
MG
+5M
+ BASS/TREBLE - EFFECT
SPEAKERS
6CH INPUT INPUT INPUT MODE A/B/OFF
4
DSP TONE
CB804
CONTROL

FUNCTION (2) P. C. B. (Side B) Lead Free Solder Used

• Semiconductor Location

Ref. no. Location

D551 H5
D552 H5
IC551 F5
5 Q551 E5
Q552 F5
Q553 G5
33 32
Q554 G5
Q555 G5
Q556 F5
48 17
49 16

64 1

45
 A B C D E F G H I J K
RX-V357/HTR-5830

1
■ PRINTED CIRCUIT BOARD (Foil side)
FUNCTION (3) P. C. B. (Side A) FUNCTION (3) P. C. B. (Side B) FUNCTION (4) P. C. B. (Side A) FUNCTION (5) P. C. B. (Side A)
Lead Free Solder Used
FUNCTION (2)
CB553

PSW
2 DVD

+5M
FUNCTION (2)

E
DVR CB552
DVL
E
DTR
DTL DTV AC4
E NC
AXR /CBL AC4
AXL
E
VIR MAIN (1)
VIL CB246
E
VOR V-AUX AUDIO
VOL
E PRV
3 SWMT -RY
E +RY
SW -12
-5
IN E STANDBY
+5
+12 /ON
+5D2
+5D1
VCR

OUT

AC4
AC4
NC
AC3
AC3
NC
AC2
E
AC2
4 SUB OUTPUT POWER TRANSFORMER
WOOFER

FUNCTION (4) P. C. B. (Side B) FUNCTION (5) P. C. B. (Side B)

Lead Free Solder Used Lead Free Solder Used

FUNCTION (6) P. C. B. (Side B) Lead Free Solder Used

5

FUNCTION (1)
CB451
SWMT
VOR
DTR

AXR
DVR

VOL
DTL

AXL
DVL

VIR

SW
VIL
E

• Semiconductor Location
Ref. no. Location
D651 H5
D652 H5
D653 F3
D654 F2
IC651 H2
DVR
DVL
E
DTR
DTL
E
AXR
AXL
E
VIR
VIL
E
VOR
VOL
E
SWMT
E
SW

IC652 H2
IC653 G2
7 Q611 D4
Q612 D4

46
 A B C D E F G H I J
RX-V357/HTR-5830

1
■ PRINTED CIRCUIT BOARD (Foil side)
FUNCTION (7) P. C. B. (Side A) FUNCTION (8) P. C. B. (Side A)
R, L models

POWER TRANSFORMER
VOLTAGE SELECTOR
2
VI
220-240V 110-120V
YE

RE

OR

FUNCTION (9) P. C. B. (Side A) FUNCTION (10) P. C. B. (Side A) FUNCTION (10) P. C. B. (Side B)

MAIN (1)
Lead Free Solder Used
CB105

HPR
5 E
HPL
/HP

• Semiconductor Location
PHONES Ref. no. Location
SILENT CINEMA D431 H5
D432 H6
7 D433 H6

47
 A B C D E F G H I J K
RX-V357/HTR-5830

1
■ PRINTED CIRCUIT BOARD (Foil side) FUNCTION (10) SPEAKERS
CB431 A
FRONT

HPR

HPL
MAIN (1) P. C. B.

/HP
(Side A)

E
R L
ROM WRITER SPEAKERS
B
TUNER PACK
MAIN (3) MAIN (4) FRONT CENTER
MAIN (5) CB391 W102B
R L
CB701
MAIN (6) E
SR

RXDF
TXDF
+5BU
/RES
W382A SL

/CE
E
DEST NC
2 CSRY

CNVss
/VR1 COMP

CLKF
+10B RY

BSY
MG
VIB TUNED
CMP1 /ST
IMP VIA TMT
CMP0 TUL
IMP +12
FUNCTION (1) -5V
+5V TUR
TE
SDRP
CB452 SCKP
SDRP
CEP

MAIN (2)
CB371
TUR
TUL
NC
BD_DATA
BD_CLK S12
BD_MUTE PRY
MG MG
MTSW
3 -12
+12
GAIN
HPF

AC1

E
DSP
CB802 E

AC1

SDM
SDD
YSSCK
4 CSY
/ICD
POWER
INT938
/ICCDC TRANSFORMER
+5D2
+5D1

VRB
VRA
REM1
PSW
/BLK
CKFD
DTFD
CEFD
ADKEY1
ADKEY0
+5MS
MG
+5M
5 VP

DSP • Semiconductor Location

CB805
Ref. no. Location Ref. no. Location
D103 I6 Q106 E6
D108 H5 Q107 I6
D109 G5 Q108 I6
D111 C5 Q112 E5
D112 H5 Q113 H5
SR
D113 G4 Q114 G6
E D114 H4 Q115 D5
6 SL
D115 G4 Q116 C6
E
C D117 G5 Q117 F6
E
FR
D118 I3 Q121 I3
E 1 15 1 13 1 15 D119 H3 Q123 H5
FL
D120 I3 Q243 F4
D121 F5 Q244 E4
D122 I4 Q247 F3
D123 G5 Q249 F4
FUNCTION (4) IC101 E6 Q251 F3
FUNCTION (1) +5D1
CB651 IC102 H6 Q262 C4
CB454 +5D2 IC103 D6
+12
+5V
E
-5V
-12
7 +RY
-RY
PRV

48
 A B C D E F G H I J
RX-V357/HTR-5830

1
■ PRINTED CIRCUIT BOARD (Foil side)
MAIN (1) P. C. B. (Side B) Lead Free Solder Used

12

3
1 100 13 24

81
80
30
31

50 51

5
• Semiconductor Location
Ref. no. Location Ref. no. Location
D101 E6 Q101 C5
D102 E6 Q102 C5
D107 E5 Q103 C5
D110 D5 Q104 C5
D116 F6 Q105 C5
D241 F3 Q118 G3
D242 E4 Q119 H3
D243 F4 Q120 G3
D244 F3 Q122 F6
D245 F4 Q124 G5
6 D246 F4 Q245 E4
D247 E4 Q246 F3
D249 F4 Q248 F3
D250 F3 Q250 F3
D251 F4 Q252 C5
D252 F3 Q253 C3
D253 C3 Q254 D4
D254 D3 Q255 E4
D255 D3 Q256 D4
D256 D3 Q257 D4
D257 D3 Q258 F4
D258 D3 Q259 E4
D259 D3 Q260 C4
7 IC241 E3 Q261 C4
IC242 D3

49
 A B C D E F G H I J K
RX-V357/HTR-5830

1
■ PRINTED CIRCUIT BOARD (Foil side)
MAIN (2) P. C. B. (Side A) MAIN (3) P. C. B. (Side A) MAIN (4) P. C. B. (Side A)

VIDEO
POWER DTV MONITOR
DVD V-AUX VCR SPEAKERS
TRANSFORMER /CBL OUT
IN OUT SURROUND
R L
2
MAIN (1)
GY

BE

CB103

MG
PRY
S12 MAIN (1)
W102A
MAIN (1)
CB245
1 9
BE

BL

AC E
3 SR
SL
DEST E
VR1 CSRY
VIB RY
VIA
+12V

MAIN (2) P. C. B. (Side B) Lead Free Solder Used MAIN (3) P. C. B. (Side B) Lead Free Solder Used

• Semiconductor Location
Ref. no. Location
D371 C3
D372 D3
6 D373 D4
D374 D4
D375 D3
D376 D3
D377 D3
D411 J3
IC391 F3
Q371 D2
Q372 C2
Q373 D2
Q374 C3
Q375 D3
Q391 G3
7 Q392 G3
Q393 G3

50
 A B C D E F G H I J
RX-V357/HTR-5830

1
■ PRINTED CIRCUIT BOARD (Foil side)
MAIN (5) P. C. B. (Side A) MAIN (6) P. C. B. (Side A)
U, C models
COMPONENT
VIDEO MAIN (1)
CB104
MONITOR DVD A DTV
OUT /CBL B MAIN (1)
W382B POWER TRANSFORMER
2

IMP
IMP
VI
GY
YE
MAIN (1) BR
W241 RE

OR
YE
6Ω 8Ω XX
3

INPEDANCE SELECTOR
CMP1
CMP0
-5V
+5V

4
• Semiconductor Location
Ref. no. Location
D381 F6
D382 F6
MAIN (5) P. C. B. (Side B) Lead Free Solder Used MAIN (6) P. C. B. (Side B) Lead Free Solder Used IC701 B6
IC702 C6
U, C models Q701 C6

5 Circuit No. U, C R T K A B, G, E L
C148, 150, 162, 163, 411, 412 X O O O O O O
C154, 155, 156, 157, 415, 416, 418 X X X O O O O
C164, 165, 167, 168, 417 X X X O O O X
C274, 275, 277, 279, 280 X X X X X O X
C373, 375, 376 X O X X X X O
C374 O X O O O O X
C381, 382 O X X X X X X
CB381 O X X X X X X
D253, 381, 382 O X X X X X X
D372, 375 X O X X X X O
6 IC241 X X X X X O X
Q249, 372, 373, 374, 375 X O X X X X O
16 9 14 8 Q251 X X X X X O X
1 7 Q253 O X X X X X X
R204, 206, 216, 217, 411, 414 X O O O O O O
1 8
R219, 220, 415 X X X O O O O
R378 X O X X X X O
R380, 381, 382 O X X X X X X
R383, 384 O X X X X X X
SW381 O X X X X X X
XL241 X X X X X O X
7
X : NOT USED
O : USED / APPLICABLE

51
 A B C D E F G H I J
RX-V357/HTR-5830

1
■ PIN CONNECTION DIAGRAM
• ICs • Diodes
1SS133 MTZJ30A 1SS355
KIA7805API KIA7912PI µPC29M33T-E1 PQ025EZ5MZP NJM2068MD LA7956 MM74HCU04SJX 1SS270A MTZJ4.7A KDS160-RTK
Anode
KIA7812API 1T2 MA8075-H Anode
MA8100-H
UDZ5.1B
UDZ6.8B
UDZS5.6BTE-17 Cathode
9 Cathode UDZS6.2B
8 4 UDZS9.1B
2 3: IN 7
IN GND 14
2: COM 1 1
OUT OUT 1
COM IN 1: OUT 1
5
1SR154-400 KPB103G TS6P03G SB01-05Q

LC72722PM AK4628VQ TC74HCT08AF M66003-0101FP MSM514260E-60JS

Cathode
Anode
33 23 48 33
– –
34 22 49 32 20
Cathode Anode
12 + +
24 7
44 12 14
3 1 64 17
40
1 1 11
1 16 1

TC74HC4053AF STK403-130Y STK404-130Y BD3816K1

64 41
• Transistors
65 40
2SA1015 2SC1740S 2SD1913
2SB949 KRA104M-AT
2SC1815 KRC102M-AT
8
15
2SC2705
4 16 13 2SA2N5401C-AT
1 2SC2N5551C-AT
1 80 25 2SC4208A
1 E
CB
1 24 E
CB BC
E

M30626FHPFP YSS938 2SA1037K 2SA1708

2SC2412K 2SC4488
120 81 2SC3326
2SD1938F
121 80 KRA104S-RTK
80 51 KRC102S-RTK C
KRC104S-RTK
E
5 81 50
B B
C
E

100 31
160 41
1 30
1 40

52
 A B C D E F G H I J K L M N
RX-V357/HTR-5830
BLOCK DIAGRAM
1

• See page 57, 58 → SCHEMATIC DIAGRAM

MAIN

CONPONENT
DVD IC702
INPUT
SELECTOR MONITOR
IC701
DTV/CBL
2
DVD
INPUT
SELECTOR MONITOR
VIDEO INPUT
IC391
DTV/CBL
COMPOSITE

VCR

V-AUX

3 • See page 54 → SCHEMATIC DIAGRAM • See page 57, 58 → SCHEMATIC DIAGRAM

REC OUT

DSP MAIN
VIDEO

Q391~393
VCR
C377
XL801 PRV THM
POWER LIMIT
24.576MHz RY371 F371

1 2 IR REMOTE 97 92 82 POWER RELAY +B

20

C152
DSP IC801 U551 MICRO
YSS938 83-85 SPEAKER RELAY C159 Q108, 110 +BV
156 COMPUTER
DVD

D122
STANDBY/ON IC242 48-51 MUTE CONTROL
6 7 FL 19 G
AUDIO DIGITAL INPUT

4 SOUND FIELD SW671

4 POWER LIMIT

C153
157 DOLBY PROCESSING 21 IC452
DTV/CBL 62 6 D/A C160 Q109, 111 -BV
PROLOGIC / 2 1 FR AC CABLE
22 VOLUME 24,25 91 POWER LIMIT DETECT
II SPEAKER FL/FR
SW551 -B
INPUT / CONFIGURATION 61 7 D/A 27 6 7 C 12 RESET
DIR DOLBY /
SELECTOR C/SW -30 -VP
DIGITAL VIRTUAL 28 IC453 16,62 +5M
IC807 60 8 D/A 24 2 1 SR
/ PROCESSING KEY 86 I DETECT Q121
LEVEL SL/SR 94,95
DTS / 23 SW552~573
CONVERT 9,125 59 12 IC803 2/2 90 DC DETECT
CD DECODER HEADPHONE 6 7 SL • See page 55, 56 → SCHEMATIC DIAGRAM
& PROCESSING AK4628VQ SERIAL CONTROL R652
IC454
SIGNAL DETECT
2 1 SW
FL DISPLAY
V551
FL DRIVER
IC551
1,2,3,100
13 15
DSP FUNCTION IC651
+RY
TUNER
XL242 +12 +12
5 SELECTOR
9 +5MS DRIVE TR Q247 +5B
MAIN 4M DRAM A/D Q551~556 16MHz VOLUME

C663
u-COM IC802 AK4628VQ C666 Q451 +7
IC803 1/2 C667

D653
31,32 G
RY105 C668

C664
C669 Q452 -7
PHONES
ANALOG INPUT

SPEAKER
CD L/R C431, 432
ADFL/ RELAY
ADFR 90Hz -12 -12
MD/CD-R L/R 23,24 26-32 HPF R651
RY101 IC652
6 53,54 3/5 Lch IC102 FRONT -RY
+ 1/7
INPUT SELECT 2/6 - Rch IC103
Tone Control
Bass/Treble
Q455, L/R A
FRONT RY102
Q456 MUTE
FL/FR L/R Power FRONT
Q102, 103 Amp.
Q453, 454 L/R B +5D1
L R IC653

-4.5dB
4dB +5D2
7ch INPUT GAIN CONTROL

-3dB
FM/AM

SPEAKER OUT
LEVEL +5
TUNER GAIN IC805
SHIFT +3.3 +3.3
Lch IC102

C662
(12)
7ch SELECTOR

Q248 IC804
7ch VOLUME

D654
Rch IC103
C665 +2.5 +2.5
MUTE RY411
49,50 SL/SR Power
7.2MHz Q101, 104 SL/SR SL/SR
Amp.
R L
C (MIX)

7 DVD L/R IC101

RY104 FL1
51 C MUTE
ANALOG INPUT

C Power
Q105 Amp. C FL2
DTV/CBL
C158
SW (MIX)
LEVEL
V-AUX L/R SHIFT
Q250
DETECT DETECT Q224 +5MS
IC451
THM Q112~117 Q123
VCR L/R BD3816K1
INPUT SELECT &
VOLUME CONTROL Q243 +5BU
I PROTECT POWER
76-79 15-21 48
8 DETECT
S12
ANALOG INPUT

D373, 374, 376, 377

Q249 +5M
RELAY DRIVE
MD/CD-R L/R
Q118~120, 122, 124 C375
Power Detector
Q372~375 /Reset
VCR L/R SPEAKER Q258, 259
C376
RELAY Q371
MG
T371
RESET
FRONT SW IC456 POWER POWER
5 7 MUTE SW SW
L/R Q611, 612 RELAY DETECT
9 OUTPUT
C626
6CH INPUT

CENTER
SWMT

SUB
WOOFER
LEVEL MUTE
SURROUND SHIFT CONTROL
L/R Q256
• See page 55, 56 → SCHEMATIC DIAGRAM • See page 57, 58 → SCHEMATIC DIAGRAM

FUNCTION MAIN
10

53
 A B C D E F G H I J K L M N
RX-V357/HTR-5830

SCHEMATIC DIAGRAM (DSP)

1 Page 58 H5 Page 55 H1
to MAIN (1) to FUNCTION (1)
CB247 CB453

2 2.6 5.0
REGULATOR
3.4 5.0

2.6
4.8
5.0
2.6 3.4 5.0

0 0

1.7
1.8

1.7
1.8
1.7

1.1

3.4

1.7
2.3
2.3

1.3
1.2
1.2
1.2
1.2
1.2
1.2
1.2
~

~
~

0
4.8 0

1.4
~
~
~
~
3.4
1.4 1.3

0
1.4 1.3
1.4 ~
1.4 1.3 1.4

4.8 0 1.4
~ 1.3 0 1.4
~ 1.3 2.5 2.5
~ 1.3 0 0
~ 1.3 0

4 2.3
0
0 0

4.0 1.7 2.3

~ 0
0
1.1 ~ DSP
4.9 1.7 ~
1.7 1.8
1.7 1.8
4.8 0
4.0 0
Point 1 Pin 1 of IC801

5.0
0 3.4
0
0.7

5.0
4.9 0.1

2.5
0 1.3
1.2

2.5
5 4M DRAM 3.4 0

2.5
0
0

2.5
0.1

0
0 1.7

0.5 1.7

0
4.9 1.7
0
0
0 0
4.0 0
4.0 2.5
1

2.5
5.0
0 0
6

4.9
1.7
4.9
0
0

0
0
2.5

0
1.7
1.7

0
3.4

5.0
0 2.5

CODEC

1.9
0 2.5
4.9
0.3
0.3
0.2
0.3
3.4
0.1
0.1
0.1

0.1
3.4

4.9

3.4

0.3
0

0
0
0
1.7

1.9
0
1.7 0
2.4 2.8 0 0 0 0 4.9 0 0.7 2.5
0
0.1 2.5
0
1.3
1.9
CENTER
0 2.5
0 2.5
0

7 4.9 0
LEVEL CONVERT & SURROUND L

1.2
0

4.9
4.9
4.9

4.9
0

0
0
0
SIGNAL DETECT

2.6
0

2.6
FRONT L
4.9
0
0
0

IC802: MSM514260E-60JS IC803: AK4628VQ IC804: PQ025EZ5MZP IC805: µPC29M33T-E1 IC806: TC74HCT08AF
4Mbit DRAM 192kHz 24Bit 8-channel CODEC Regulator Voltage Regulator Quad 2-Input And Gate

WE OE 1 INPUT
13 27 Audio Vin 1 3 Vo 1A 1 14 Vcc
LIN 31 ADC HPF I/F
8 Timing 1B 2 13 4B

Standard Voltage
RAS 14

Starter Circuit
Generator

to FUNCTION (2)
I/O Safety Drive
Limiter
1Y 3 12 4A
RIN 32 ADC HPF 2 Vc

Page 58 C10
Controller

Page 56 D9
to MAIN (1)
LCAS 29

Driver
VREFH
LOOP0

5 2A 4 11 4Y

Sudden Current
VCOM

Output
MCLK

Amp.
TDM0

AVDD

CB429

CB551
AVSS
DZF1

UCAS 28 8 8
DIF1
DIF0

GND

Protection
I/O

Overheat Protection
Buffers
P/S

Controller 2B 5 10 3B
LPF DAC DATT MCLK 3 OUTPUT
DQ1~DQ8 LOUT1 27 39 MCLK
2Y 6 9 3A
Column LRCK 5 LRCK
Column Decoders Input
44
43
42
41
40
39
38
37
36
35
34

9 Address 9
8 8 GND 7 8 3Y
Buffers Buffers ROUT1 28 LPF DAC DATT BICK 4 BICK
SDOS 1 33 DZF2/OVF
10 DAUX I2C 2 32 RIN
Internal I/O Excessive Electric
Refresh Sense Amplifiers 16 16 LOUT2 25 LPF DAC DATT
A0~A8 Address Selector SMUTE 3 31 LIN Current Protection IC807: MM74HCU04SJX
Counter
Control Clock Format
Converter BICK 4 30 NC 2 COMMON (GND) Hex Inverters
Input ROUT2 26 LPF DAC DATT
8 8 LRCK 5 29 MASTER
Buffers
Row
9 9
Row
SDOUT SDTI1 6 28 ROUT1
Address Word Memory DQ9~DQ16
Deco- LOUT3 23 LPF DAC DATT 1 SDOS
Buffers
ders Drivers Cells SDTI2 7 27 LOUT1 A1 1 14 VCC
Output
8 8 9 SDTO SDTI3 8 26 ROUT2
Buffers
ROUT3 24 LPF DAC DATT SDIN1 6 SDTI1 SDTO 9 25 LOUT2 Y1 2 13 A6
SDIN2
9 VCC 20
SDIN3
7
8
SDTI2
SDTI3
DAUX 10 24 ROUT3
A2 3 12 Y6
On Chip LOUT4 21 LPF DAC DATT SDIN4 12 SDTI4 DFS0 11 23 LOUT3
12
13
14
15
16
17
18
19
20
21
22

VBB Generator
Y2 4 11 A5
VSS 21
ROUT4 22 LPF DAC DATT
SDTI4
DZFE
TVDD
DVDD
DVSS
PDN
TST
CAD1
CAD0
LOUT4
ROUT4

A3 5 10 Y5
AK4628
Y3 6 9 A4

GND 7 8 Y4
DSP

10
★ All voltages are measured with a 10MΩ/V DC electronic volt meter.
★ Components having special characteristics are marked s and must be replaced
with parts having specifications equal to those originally installed.
★ Schematic diagram is subject to change without notice.

54
 A B C D E F G H I J K L M N
RX-V357/HTR-5830
SCHEMATIC DIAGRAM (FUNCTION 1/2)
1 Page 58 F3 Page 54 H1
FUNCTION (3) FUNCTION (6) FUNCTION (1) INPUT Section to MAIN (1) to DSP
CB244 CB803

12.0

2 8
0 1
2 3 0
0

FRONT L
05
7 0
6
4
0 -12.1

12.0

12.1 7.0 2 8
0 1
3 0
3 7.7 0

CENTER
05
7
0 6 0
7.8 4
-12.1
0

12.0

SURROUND L
-7.7 6 8
0
5 7 0
0
4 -7.7
03
-7.0 1
-12.1 02 0
4
-12.1

FRONT L

12.0
5 0.1
0 0
0.1 0.1

-7.0
7.0
0
0
0
0
0
0
0
0

0
0
0
0
0
0
0.8
0 0
0 0 0

0 0
0 0 0.7 0
HPF
CD L (ANALOG IN)
0 0 0.7 0
0 0
0 INPUT SELECT 0
0
0 0
0
& 0
0.8 0.1

6 0
0
VOLUME CONTROL 0
0 0 0
0.1 0.1

0 0
MUTE 0 0
-12.1

0 0
0
-12.1
0
-12.1
0 0
-12.1
HPF 12.0
0 0 0.1 0
0 0 0.1 0
0 0 0.1 0
0 0
0 0
0 0
0 0
0 0
7 0 0
0 0
CENTER

Page 57 A6
to MAIN (1)
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
SURROUND L

CB101
IC451: BD3816K1
7-channel volume IC for 7-channel

65 GOUTFR
79 ROUTC2

78 ROUTC1

77 ROUTB2

76 ROUTB1

75 ROUTA2

74 ROUTA1
80 AGND13

73 AGND12

70 AGND11
8

66 THGND
67 MUTE
72 VCC

71 VEE

69 DA

68 CL
LOGIC
IC452~IC456: NJM2068MD

REC C

REC B

REC A
AGND1 1 64 VINFR
Dual OP-Amp
INA1 2 63 GOUTFL

BD3816K1
INA2 3 62 VINFL

OUT1 1 8 +VCC INB1 4 61 AGND10

INB2 5 60 TNF1
Input
–IN1 2 7 OUT2 select ING SW TREBLE
+ – + – INC1 6 59 TNF2

INC2 7 58 BNFA1
+IN1 3 6 –IN2
IND1 8 Output BASS 57 BNFB1
mode

–VCC 4 5 +IN2 IND2 9

select
56 BNFA2

9 INE1 10 55 BNFB2

INE2 11 Master
Volume
+ 54 OUTFR

INF1 12 + 53 OUTFL

INF2 13 52 AGND9

AGND2 14 FRL select 51 OUTC

INDVDFR 15 50 OUTSR

INDVDFL 16 49 OUTSL

INDVDC 17 48 OUTCB

INDVDSR 18 47 AGND8

INDVDSL 19 46 OUTSW

INDVDCB 20 45 AGND7

INDVDSW 21 44 VINC

10 AGND3 22
6.1ch select
43 GOUTC

OUT1 23 42 VINSR

★ All voltages are measured with a 10MΩ/V DC electronic volt meter. OUT2 24 41 GOUTSR

★ Components having special characteristics are marked s and must be replaced

with parts having specifications equal to those originally installed. 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40

AGND4

INDSPFR

INDSPFL

INDSPC

INDSPSR

INDSPSL

INDSPCB

INDSPSW

AGND5

GOUTSW

VINSW

AGND6

GOUTCB

VINCB

GOUTSL

VINSL
★ Schematic diagram is subject to change without notice.

55
 A B C D E F G H I J K L M N
RX-V357/HTR-5830

SCHEMATIC DIAGRAM (FUNCTION 2/2)

1
FL DISPLAY
R, L

-21.7
-21.7

-26.3
-26.2
-26.3
-26.3
-26.3
-26.3
-26.3
-26.1
-26.3
-26.3
-26.3
-26.3
-26.3
-26.3
-26.0
-26.0

-22.4
-20.6
-16.7
-16.5
-16.5
-10.9
-16.7
-18.4
-16.7
-22.3
-26.2
-28.1

-22.4
-26.2
-20.4
-26.2

-20.2
-20.4
-16.6
-18.6

-16.6
-24.3
-22.3
-26.2

-12.8
-26.2
-24.3
-26.3

-18.5

-10.9
-10.9
-14.6

-21.7
-21.7
-7.4

-6.9

-9.0

-7.0

-7.2

-9.0

to FUNTION (4)
CB653
H3
2

4.8 4.8

-14.7 -7.2

-20.4
-26.2

-20.4
-16.6
-18.6

-16.6
-24.3
-22.3
-16.2

-12.8

-26.2
-6.9

-9.0

-7.0

4.8
-24.3 -14.6 -7.2
-26.2

-20.2
-22.4 -26.3 -22.2 x: NOT USED
-22.2 O: USED / APPLICABLE
-7.4 -7.2
-28.1 FL DISPLAY -18.5
-26.2 -9.0
3 -22.3
DRIVER -10.9
-28.3
-28.3 FUNCTION (5)
-16.7 -10.9
-18.4 -14.7
-16.7 4.8
4.8 4.8
-10.9 2.1
-16.5 2.1
4.8 4.8
-16.5 0 -20.2 -7.4
-26.2 -16.7 0 -20.2 -7.4
-20.6 4.9
-22.4 4.9
-26.0 -26.0 -26.2 4.9
-26.2
4
-26.2
-26.3
-26.3
-26.3
-26.3
-26.3
-26.3
-26.1
-26.3
-26.3
-26.3
-26.3
-26.3
-26.2
-26.3
-28.3

Page 57 H3
to MAIN (1)
4.9

CB105
0

5 0 0
0 0

FUNCTION (10)
IR REMOTE

6
5.0

5.0
0

23.4

0
0

12.0 23.2 5.0 13.0 -23.6

0 0
5.0 12.0
AC 35.7

5.6

7 5.7 AC 11.1

Page 58 H4
to MAIN (1)
CB246
AC 5.5
-5.6

13.2
R, L models only -5.5

to FUNTION (2)
FUNCTION (7)
5.6

CB552
-4.9 -12.1

H3
0 6.1
-12.2 -23.5
0

POWER SUPPLY

FUNCTION (9) FUNCTION (8) FUNCTION (2) FUNCTION (4)

Page 54 M8
to DSP IC551: M66003-0101FP IC651: KIA7812PI IC652: KIA7912PI
FL Display Driver IC653: KIA7805PI Voltage Regulator
CB804 Voltage Regulator
9 1 INPUT
R22
1 COMMON (GND)
Display code R22 R17 R23
CGROM R15 R18 R21 R23
RAM
(35 bit x 166) 44 P35 R1 Q11
(8-bit x 60) Q11-1
Q28 Q17 Q21
Segment 19 P10 Q15 Q22 Q24
Code
write output 17 P9
Q16
R16
circuit Q23 R13 R12
Q12
CGROM Q14 R14 Q19 R24
/CEFL 2 Serial dot data 9 P1 R10 R15 Q29
data write (35 bit x 16) R20
CKFL 3 receive Q17 Q19 R16 R1
circuit Code/ R19 Q18 Q20
DTFL 4 Q25
command
45 P36
R12 3 OUTPUT
control Q18 Q6 R20 Q30 R14 R17 Q31
circuit Q1 R25
52 G12 R19
R18
R11 R9 Q12 Q13
51 G13 Z1 R7 C1
R2 Q2 Q3 Q26-1 R11
Q10 R10
code R26
Segment 50 G14 Q2 Q26
Q27-1
Q27 3 OUTPUT
select R21
digit Q13 R3 Q7 Q7 D4 Q14
select/ 49 Q4 Q15
XIN 7 R0
Clock timing Display output C2 C1 Q16
generator clock circuit Q8 R9
XOUT 6 controller scan pulse 48 Q3 Q5 Q9 Q8 R4 R5 R6
R13
Q4 Q6 Q9 Q11
R4
10 47 P38 R5 R6 R8
2 COMMON (GND)
Q5
R2
R3
Q10
R7
R8

46 P37 2 INPUT

★ All voltages are measured with a 10MΩ/V DC electronic volt meter.

63 G1
★ Components having special characteristics are marked s and must be replaced Digit
/RESET 1 output
with parts having specifications equal to those originally installed. circuit
VDD 8
★ Schematic diagram is subject to change without notice. Vcc2 18
53 G11

Vss 5
Vp 64

56
 A B C D E F G H I J K L M N
RX-V357/HTR-5830
SCHEMATIC DIAGRAM (MAIN 1/2)
1

L CH POWER AMP
52.1

-51.6
52.0

0.6
MUTE

-52.0
52.1
0.1
0.1
0.1
0.1

0
0
0
0

0
0
50.4
0
SURROUND L 0

2 -12.1 0
DETECT
51.8

0.1

-12.1 0
0.1

FRONT L SURROUND L
0

to FUNCTION (10)
IC101: STK404-130Y
3

Page 56 K5
Power Amp.

CB431
DETECT
51.8

51.7
0.1
50.4
0
51.0
50.4 51.0

51.0
4 0
0.1 0 0

0 5.0
FRONT L DETECT
0 0
0
4.8 0
0

R CH POWER AMP 0
IC102, 103: STK403-130Y
Power Amp.
-51.6

3
0.6
-52.0
52.1
0.1
0.1
0.1
0.1

0
0
0
0

0
0
0 0 0
8
MUTE
50.4

Pre Pre
0 0 0
Driver Driver
CH1 CH2
5 DETECT MAIN (4) 11 15
51.8 12 14
0

0.1
-12.1
0
0
Bias Circuit
x: NOT USED
1 O: USED / APPLICABLE

0
2
SUB
-12.1 10 9 5 4 6 7 13
0 0 11.7

RELAY
to FUNCTION (1)

0 11.6
CB454_9 pin
Page 55 L7

DRIVE-12.0
6
11.5
-12.0

-12.0
DETECT SPEAKER -12.0

51.8 RELAY
0.1
RELAY DRIVE
11.7 11.7
0
0.1 11.6

CENTER 11.5 -12.0 POWER SUPPLY

7
to MAIN (1) µ-COM Section

-12.0
11.5
0
Page 58 D3

-12.0 13.0 13.0 13.0

-12.0
MUTE 0
AC 12.2
0 0.1
6.0 6.0
SPEAKER RELAY
CENTER POWER AMP RELAY DRIVE 0.1
-12.1 0.8
0
0.1
0.1
0
-51.6
11.9
1.1

-52.0
52.1
0.1
0.1
0.4

0.1
11.7 11.7 0 0

0.1 0.1 0.1

11.6
8 11.5
11.6
DETECT
51.8
-12.0
POWER RELAY
0.1

0.1
SPEAKER RELAY MAIN (2)

0.1
-28.3
48.9 1.1
0 -47.8 MAIN (6)
CENTER -28.9

Page 58 A8
to MAIN (1)
49.3

W382B
9 50.4 -28.9
49.8

-52.0
52.1

AC 76.3

10
MAIN (1) POWER Section
★ All voltages are measured with a 10MΩ/V DC electronic volt meter.
★ Components having special characteristics are marked s and must be replaced
with parts having specifications equal to those originally installed.
★ Schematic diagram is subject to change without notice.

57
 A B C D E F G H I J K L M N
RX-V357/HTR-5830

SCHEMATIC DIAGRAM (MAIN 2/2)

G3 A4
1 to MAIN (1) Power Section to MAIN (1)
Point A-1 Pin 13 of IC242 Point A-2 emitter of Q258 1 W245 W241
and collector of Q259 2
IC391: LA7956
Video Switch

6dB 0
AMP
1 Q258 E 1 Q258 E 0.7
0

4 INPUT 1 OUTPUT
2 Q259 C 2 Q259 C DRIVER CONTROL
VIDEO SWITCH INPUT
SELECTOR
2

11.8

6.3
1 2 3 4 5 6 7 8 9

3.9
3.9

3.9

3.9
4.9
4.9
0
VIDEO A B VIN1 GND VIN2 VCC VIN3 VIN4
OUT 5.0
POWER ON POWER OFF POWER ON
(Connect the power cable) (Disconnect the power cable) (Connect the power cable)

0 0
-4.9 0
0 0

Page 57 A7 Page 55 G1 K1 4.8

to MAIN (1) Power Section to FUNCTION (1) to MAIN (3) 0 0
CB452_12 pin CB391 4.9 0
11.8
6.3 6.3 0 0 0 5.0
3 6.3 0 4.9 0
5.6 5.0
6.9 0
4.9 0
7.3 5.0

0
0
0 0
to MAIN (1)

0
CB701
M1

to FUNCTION (4)
FREQUENCY STEP

CB651_10pin
Page 56 H7
MUTE 0
0
0

4 CONTROL
4.8
MAIN (3)
-12.0 4.9

4.8
IC241: LC72722PM
-12.0 4.9 RDS Signal Processor

FL OUT
VREF
4.8

CB802_9pin

C IN
Page 54 G1
to DSP
to TUNER PACK

-12.0 4.9
9.6 11.9
RDS 1 5 6

DECODER 4.8
VDDA 3 PLL CLOCK 14 VDDD
5 10.3 REFERENCE
VOLTAGE
(57 kHz) RECOVERY
(1187.5 Hz)
-12.1 4.9
VSSA 4 15 VSSD
VREF
10.4 57 kHz DATA
MPX IN 2 ANTIALIASING SMOOTHING
4.8 bpf
FILTER DECODER 19 RDS-ID
FILTER (SCF)
-12.1 4.9
0
11.9
DO 20 MAIN (5)
CL 21 RAM ERROR CORRECTION SYNC / EC 18 SYNC
DI 22 CCB (24 BLOCK DATA) (SOFT DECISION) CONTROLLER 24 SYR
0 0.7
CE 23
T1 CLK (4.332 MHz)
7 MEMORY
-12.1 T2 8 CONTROL
TEST SYNC SYNC
4.8 4.8 0 DETECT-1 DETECT-2
0 T3 9 OSC/DIVIDER
T4 10
11.6
0
0 0
6 0 11.6 0.1 0.1 0
0
11 16 17 13 12

X IN

X OUT
T5
T6
T7
0 LEVEL 0 4.8 4.9

SHIFT 1.2 0

0 0 0

13.0 5.6 4.9 4.8 1.2

5.6 4.9 4.8

6.2 4.2 0

4.9
4.9
4.9
5.1

0
0
4.8

4.9
4.9
4.9
0

0
0

0
0
13.0 5.6 5.6 5.1
5.6
0
4.9

6.2 4.9
4.9 4.9
7
4.9
4.9

6.2 4.9
4.9
0 4.9 4.9
0

to Rom Writer
0
4.9 4.9
A-2 0

0
MICRO COMPUTER
12.9
12.9
2 1.1 0
1
to MAIN (6) W382A

1.2 0.9
12.3
4.9 4.8 4.9
Page 57 J9

0.5 0
4.8 0
0.3 6.8 7.4 0
0.3 0
0 6.8 4.8
0

8 0
0.8
4.8
0 0 0
0 4.8 0
4.9 A-1 0

POWER DETECTOR 4.9

4.8
4.9

0
4.9
4.9

0.5
0.1
4.9
0

0
0

& RESET 4.8 0.5 0.5 0

4.9
0.4
4.9
5.0
0
0
4.9
2.4

2.3
4.9
4.9

4.9
0

X : NOT USED
O : USED / APPLICABLE
10

★ All voltages are measured with a 10MΩ/V DC electronic volt meter.

MAIN (1) µ-COM Section ★ Components having special characteristics are marked s and must be replaced
with parts having specifications equal to those originally installed.
★ Schematic diagram is subject to change without notice.
Page 54 L8
to DSP
58 CB805
 RX-V357/HTR-5830

PARTS LIST
■ ELECTRICAL PARTS

■ WARNING
● Components having special characteristics are marked s and must be replaced with parts having specifications equal to
those originally installed.

ABBREVIATIONS IN THIS LIST ARE AS FOLLOWS:

C.A.EL.CHP : CHIP ALUMI.ELECTROLYTIC CAP L.EMIT : LIGHT EMITTING MODULE
C.CE : CERAMIC CAP LED.DSPLY : LED DISPLAY
C.CE.ARRAY : CERAMIC CAP ARRAY LED.INFRD : LED,INFRARED
C.CE.CHP : CHIP CERAMIC CAP MODUL.RF : MODULATOR,RF
C.CE.ML : MULTILAYER CERAMIC CAP PHOT.CPL : PHOTO COUPLER
C.CE.M.CHP : CHIP MULTILAYER CERAMIC CAP PHOT.INTR : PHOTO INTERRUPTER
C.CE.SAFTY : RECOGNIZED CERAMIC CAP PHOT.RFLCT : PHOTO REFLECTOR
C.CE.TUBLR : CERAMIC TUBULAR CAP PIN.TEST : PIN,TEST POINT
C.CE.SMI : SEMI CONDUCTIVE CERAMIC CAP PLST.RIVET : PLASTIC RIVET
C.EL : ELECTROLYTIC CAP R.ARRAY : RESISTOR ARRAY
C.MICA : MICA CAP R.CAR. : CARBON RESISTOR
C.ML.FLM : MULTILAYER FILM CAP R.CAR.CHP : CHIP RESISTOR
C.MP : METALLIZED PAPER CAP R.CAR.FP : FLAME PROOF CARBON RESISTOR
C.MYLAR : MYLAR FILM CAP R.FUS : FUSABLE RESISTOR
C.MYLAR.ML : MULTILAYER MYLAR FILM CAP R.MTL.CHP : CHIP METAL FILM RESISTOR
C.PAPER : PAPER CAPACITOR R.MTL.FLM : METAL FILM RESISTOR
C.PLS : POLYSTYRENE FILM CAP R.MTL.OXD : METAL OXIDE FILM RESISTOR
C.POL : POLYESTER FILM CAP R.MTL.PLAT : METAL PLATE RESISTOR
C.POLY : POLYETHYLENE FILM CAP RSNR.CE : CERAMIC RESONATOR
C.PP : POLYPROPYLENE FILM CAP RSNR.CRYS : CRYSTAL RESONATOR
C.TNTL : TANTALUM CAP R.TW.CEM : TWIN CEMENT FIXED RESISTOR
C.TNTL.CHP : CHIP TANTALUM CAP R.WW : WIRE WOUND RESISTOR
C.TRIM : TRIMMER CAP SCR.BND.HD : BIND HEAD B-TITE SCREW
CN : CONNECTOR SCR.BW.HD : BW HEAD TAPPING SCREW
CN.BS.PIN : CONNECTOR,BASE PIN SCR.CUP : CUP TITE SCREW
CN.CANNON : CONNECTOR,CANNON SCR.TERM : SCREW TERMINAL
CN.DIN : CONNECTOR,DIN SCR.TR : SCREW,TRANSISTOR
CN.FLAT : CONNECTOR,FLAT CABLE SUPRT.PCB : SUPPORT,P.C.B.
CN.POST : CONNECTOR,BASE POST SURG.PRTCT : SURGE PROTECTOR
COIL.MX.AM : COIL,AM MIX SW.TACT : TACT SWITCH
COIL.AT.FM : COIL,FM ANTENNA SW.LEAF : LEAF SWITCH
COIL.DT.FM : COIL,FM DETECT SW.LEVER : LEVER SWITCH
COIL.MX.FM : COIL,FM MIX SW.MICRO : MICRO SWITCH
COIL,OUTPT : OUTPUT COIL SW.PUSH : PUSH SWITCH
DIOD.ARRAY : DIODE ARRAY SW.RT.ENC : ROTARY ENCODER
DIODE.BRG : DIODE BRIDGE SW.RT.MTR : ROTARY SWITCH WITH MOTOR
DIODE.CHP : CHIP DIODE SW.RT : ROTARY SWITCH
DIODE.VAR : VARACTOR DIODE SW.SLIDE : SLIDE SWITCH
DIOD.Z.CHP : CHIP ZENER DIODE TERM.SP : SPEAKER TERMINAL
DIODE.ZENR : ZENER DIODE TERM.WRAP : WRAPPING TERMINAL

RX-V357/HTR-5830
DSCR.CE : CERAMIC DISCRIMINATOR THRMST.CHP : CHIP THERMISTOR
FER.BEAD : FERRITE BEADS TR.CHP : CHIP TRANSISTOR
FER.CORE : FERRITE CORE TR.DGT : DIGITAL TRANSISTOR
FET.CHP : CHIP FET TR.DGT.CHP : CHIP DIGITAL TRANSISTOR
FL.DSPLY : FLUORESCENT DISPLAY TRANS : TRANSFORMER
FLTR.CE : CERAMIC FILTER TRANS.PULS : PULSE TRANSFORMER
FLTR.COMB : COMB FILTER MODULE TRANS.PWR : POWER TRANSFORMER ASS’Y
FLTR.LC.RF : LC FILTER,EMI TUNER.AM : TUNER PACK,AM
GND.MTL : GROUND PLATE TUNER.FM : TUNER PACK,FM
GND.TERM : GROUND TERMINAL TUNER.PK : FRONT-ENDTUNER PACK
HOLDER.FUS : FUSE HOLDER VR : ROTARY POTENTIOMETER
IC.PRTCT : IC PROTECTOR VR.MTR : POTENTIOMETER WITH MOTOR
JUMPER.CN : JUMPER CONNECTOR VR.SW : POTENTIOMETER WITH ROTARY SW
JUMPER.TST : JUMPER,TEST POINT VR.SLIDE : SLIDE POTENTIOMETER
L.DTCT : LIGHT DETECTING MODULE VR.TRIM : TRIMMER POTENTIOMETER

Note) Those parts marked with “#” are not included in the P.C.B. ass’y.

59
 RX-V357/HTR-5830

P.C.B. DSP P.C.B. DSP & P.C.B. FUNCTION

Schm Schm
Ref. PART NO. Description Markets Ref. PART NO. Description Markets
* WD044200 P.C.B. DSP (YEM) UCRKABGEL U801 WB001400 CN.PHOT.SN 1P GP1FA553RZ
* WE741100 P.C.B. DSP T U802 WB001400 CN.PHOT.SN 1P GP1FA553RZ
CB802 VQ961200 CN.BS.PIN 9P XL801 V3625700 RSNR.CRYS 24.576MHz
CB803 VQ044500 CN.BS.PIN 11P
CB804 VF982200 CN.BS.PIN 14P
CB805 VQ961700 CN.BS.PIN 14P
C805 UR847220 C.EL 22uF 25V * WE545000 P.C.B. FUNCTION UCTKA
C816 UR819100 C.EL 1000uF 6.3V * WE545100 P.C.B. FUNCTION R
C822 UR829100 C.EL 1000uF 10V * WE545200 P.C.B. FUNCTION BGE
C824 UR819100 C.EL 1000uF 6.3V * WE857100 P.C.B. FUNCTION (YEM) L
C827 UR818100 C.EL 100uF 6.3V CB431 VK026300 CN.BS.PIN 4P
C828 UR819100 C.EL 1000uF 6.3V CB451 VQ963900 CN.BS.PIN 18P
C833 UR818470 C.EL 470uF 6.3V CB452 VQ961500 CN.BS.PIN 12P
C834 UR818100 C.EL 100uF 6.3V CB453 VM859500 CN.BS.PIN 11P
C840 UR818470 C.EL 470uF 6.3V CB454 VQ961200 CN.BS.PIN 9P
C859 UR818100 C.EL 100uF 6.3V CB551 VN394900 CN.BS.PIN 14P
C872 UR818100 C.EL 100uF 6.3V CB611 VQ962100 CN.BS.PIN 18P
C883 UR818100 C.EL 100uF 6.3V CB652 LB919090 CN.BS.PIN 9P
C886 UR819100 C.EL 1000uF 6.3V CB653 VK024700 CN.BS.PIN 3P
C891 UR819100 C.EL 1000uF 6.3V CB676 VQ963900 CN.BS.PIN 18P
C912 UR818100 C.EL 100uF 6.3V CB677 VQ962100 CN.BS.PIN 18P
C913 UR818100 C.EL 100uF 6.3V CB691 V9377900 CN.BS.PIN 4P SE VHSERIES RL
C916 UR828100 C.EL 100uF 10V C431 UA654100 C.MYLAR 0.01uF 50V
C918 UR866220 C.EL 2.2uF 50V C432 UA654100 C.MYLAR 0.01uF 50V
C919 UR847100 C.EL 10uF 25V C433 UA654100 C.MYLAR 0.01uF 50V
C920 UR847100 C.EL 10uF 25V C434 UA654100 C.MYLAR 0.01uF 50V
D801 VT332900 DIODE 1SS355 C457 UA652220 C.MYLAR 220pF 50V
D802 VT332900 DIODE 1SS355 C458 UA652220 C.MYLAR 220pF 50V
D803 VT332900 DIODE 1SS355 C459 UA652220 C.MYLAR 220pF 50V
D804 VT332900 DIODE 1SS355 C460 UA652220 C.MYLAR 220pF 50V
D805 VT332900 DIODE 1SS355 C461 FG651470 C.CE 47pF 50V
D806 VT332900 DIODE 1SS355 C462 FG651470 C.CE 47pF 50V
D807 WB081800 DIODE SB01-05Q C463 UR837100 C.EL 10uF 16V
D808 WB081800 DIODE SB01-05Q C464 UR837100 C.EL 10uF 16V
D809 WB081800 DIODE SB01-05Q C465 UR837100 C.EL 10uF 16V
D810 WB081800 DIODE SB01-05Q C466 UR837100 C.EL 10uF 16V
IC801 X0238B00 IC YSS938 C467 UR847470 C.EL 47uF 25V
IC802 XV077B00 IC MSM514260E-60JS C468 UR847470 C.EL 47uF 25V
RX-V357/HTR-5830

IC803 X3807A00 IC AK4628VQ C469 UR838100 C.EL 100uF 16V

IC804 XZ003A00 IC PQ025EZ5MZP 2.5V C470 UR838100 C.EL 100uF 16V
IC805 X6051A00 IC UPC29M33T-E1-AZ C473 UR837100 C.EL 10uF 16V
IC806 XZ012A00 IC TC74HCT08AF(EL) C474 UR837100 C.EL 10uF 16V
IC807 XY070A00 IC MM74HCU04SJX INVER C475 UR837100 C.EL 10uF 16V
PJ801 V4483900 JACK.PIN 1P YKC21-3895 C476 UR837100 C.EL 10uF 16V
R807 HV753220 R.CAR.FP 2.2Ω 1/4W C477 UR837100 C.EL 10uF 16V
R892 HV753220 R.CAR.FP 2.2Ω 1/4W C478 UR837100 C.EL 10uF 16V
R902 HV753100 R.CAR.FP 1Ω 1/4W C479 UR837100 C.EL 10uF 16V
R903 HV753100 R.CAR.FP 1Ω 1/4W C480 UA653470 C.MYLAR 4700pF 50V
R910 VU224000 R.MTL.FLM 0.22Ω 1W C481 VE326000 C.MYLAR.ML 0.1uF 50V
R919 RE045100 R.ARRAY 100Ωx4 C482 VE326000 C.MYLAR.ML 0.1uF 50V
R920 RE045100 R.ARRAY 100Ωx4 C483 UA653470 C.MYLAR 4700pF 50V
R921 RE045100 R.ARRAY 100Ωx4 C484 VE326000 C.MYLAR.ML 0.1uF 50V
R922 RE045100 R.ARRAY 100Ωx4 C485 VE326000 C.MYLAR.ML 0.1uF 50V
✻ New Parts ✻ New Parts
60
 RX-V357/HTR-5830

P.C.B. FUNCTION P.C.B. FUNCTION

Schm Schm
Ref. PART NO. Description Markets Ref. PART NO. Description Markets
C486 UR837100 C.EL 10uF 16V C618 UA652220 C.MYLAR 220pF 50V
C487 UR837100 C.EL 10uF 16V C619 UA652220 C.MYLAR 220pF 50V
C488 UR866220 C.EL 2.2uF 50V C620 UA652220 C.MYLAR 220pF 50V
C489 UR837100 C.EL 10uF 16V C621 UA652220 C.MYLAR 220pF 50V
C490 UR837100 C.EL 10uF 16V C622 FG651470 C.CE 47pF 50V
C491 UR837100 C.EL 10uF 16V C623 FG651470 C.CE 47pF 50V
C492 UR837100 C.EL 10uF 16V C624 UR837100 C.EL 10uF 16V
C493 UR837100 C.EL 10uF 16V C625 UR837100 C.EL 10uF 16V
C494 UR837100 C.EL 10uF 16V C626 UA654100 C.MYLAR 0.01uF 50V
C495 UR837100 C.EL 10uF 16V C651 UR837470 C.EL 47uF 16V
C496 UR837100 C.EL 10uF 16V C652 UR837470 C.EL 47uF 16V
C497 UR837100 C.EL 10uF 16V C653 UR837470 C.EL 47uF 16V
C498 UA654470 C.MYLAR 0.047uF 50V C654 UR837470 C.EL 47uF 16V
C499 UA652100 C.MYLAR 100pF 50V C655 UR838100 C.EL 100uF 16V
C500 UR838100 C.EL 100uF 16V C656 UR838100 C.EL 100uF 16V
C501 UR838100 C.EL 100uF 16V C657 UR867100 C.EL 10uF 50V
C502 UA652100 C.MYLAR 100pF 50V C658 UR867100 C.EL 10uF 50V
C503 UA652100 C.MYLAR 100pF 50V C659 UR838100 C.EL 100uF 16V
C504 UA652100 C.MYLAR 100pF 50V C660 UA654100 C.MYLAR 0.01uF 50V
C505 UA652100 C.MYLAR 100pF 50V C661 UR867100 C.EL 10uF 50V
C506 UA652100 C.MYLAR 100pF 50V s C662 UR73A100 C.EL 10000uF 16V
C507 UA653390 C.MYLAR 3900pF 50V s C663 UR759220 C.EL 2200uF 35V
C508 UR837100 C.EL 10uF 16V s C664 UR759100 C.EL 1000uF 35V
C509 UR837100 C.EL 10uF 16V C665 VE326000 C.MYLAR.ML 0.1uF 50V
C510 UR837100 C.EL 10uF 16V C666 VE326000 C.MYLAR.ML 0.1uF 50V
C511 UA652100 C.MYLAR 100pF 50V C667 VE326000 C.MYLAR.ML 0.1uF 50V
C512 UA652100 C.MYLAR 100pF 50V C668 VE326000 C.MYLAR.ML 0.1uF 50V
C513 UR837100 C.EL 10uF 16V C669 VE326000 C.MYLAR.ML 0.1uF 50V
C514 UR837100 C.EL 10uF 16V D431 VU172500 DIODE.ZENR UDZS9.1B
C515 UR837100 C.EL 10uF 16V D432 VT332900 DIODE 1SS355
C516 UR837100 C.EL 10uF 16V D433 VT332900 DIODE 1SS355
C517 UR837100 C.EL 10uF 16V D451 VU994300 DIODE.ZENR MA8075-H 7.7V
C518 UR837100 C.EL 10uF 16V D452 VU994300 DIODE.ZENR MA8075-H 7.7V
C519 UA654270 C.MYLAR 0.027uF 50V D551 VU172100 DIODE.ZENR UDZS6.2B 6.2V
C520 UA654270 C.MYLAR 0.027uF 50V D552 VU172100 DIODE.ZENR UDZS6.2B 6.2V
C521 UR838100 C.EL 100uF 16V D651 VU172000 DIODE.ZENR UDZS5.6BTE-17 5.6V
C522 UR838100 C.EL 100uF 16V D652 VU172000 DIODE.ZENR UDZS5.6BTE-17 5.6V
C523 UA654270 C.MYLAR 0.027uF 50V s D653 WA653100 DIODE.BRG KBP103G 1.0A 200V

RX-V357/HTR-5830
C524 UA654270 C.MYLAR 0.027uF 50V s D654 WA653100 DIODE.BRG KBP103G 1.0A 200V
C525 UR837100 C.EL 10uF 16V * IC451 X6299A00 IC BD3816K1-C
C526 UR837100 C.EL 10uF 16V IC452 X3505A00 IC NJM2068MD-TE2
C527 UA652820 C.MYLAR 820pF 50V IC453 X3505A00 IC NJM2068MD-TE2
C528 UA652820 C.MYLAR 820pF 50V IC454 X3505A00 IC NJM2068MD-TE2
C529 UA652820 C.MYLAR 820pF 50V IC455 X3505A00 IC NJM2068MD-TE2
C530 UA652820 C.MYLAR 820pF 50V IC456 X3505A00 IC NJM2068MD-TE2
C531 UA652820 C.MYLAR 820pF 50V IC551 X2874A00 IC M66003-0101FP FLD
C554 UR837100 C.EL 10uF 16V s IC651 X4153A00 IC KIA7812PI
C562 UR818330 C.EL 330uF 6.3V s IC652 X4154A00 IC KIA7912PI
C612 UA652470 C.MYLAR 470pF 50V s IC653 X4928A00 IC KIA7805API 5V
C614 UA652220 C.MYLAR 220pF 50V JK431 V9408200 JACK.PHONE MSJ-064-05B GR
C615 UA652220 C.MYLAR 220pF 50V PJ451 V7190400 JACK.PIN 6P
C616 UA652220 C.MYLAR 220pF 50V PJ452 V7046800 JACK.PIN 6P MSP-246V1-01NI
C617 UA652220 C.MYLAR 220pF 50V PJ611 V7189700 JACK.PIN 1P
✻ New Parts ✻ New Parts
61
 RX-V357/HTR-5830

P.C.B. FUNCTION P.C.B. FUNCTION & P.C.B. MAIN

Schm Schm
Ref. PART NO. Description Markets Ref. PART NO. Description Markets
PJ612 V7046700 JACK.PIN 4P MSP-244V1-01NI SW566 WD483100 SW.TACT SKRGAAD010
PJ613 V7046800 JACK.PIN 6P MSP-246V1-01NI SW567 WD483100 SW.TACT SKRGAAD010 BGE
PN451 WB213200 PIN L=70 WB21320 SW568 WD483100 SW.TACT SKRGAAD010
PN551 WB213200 PIN L=70 WB21320 SW569 WD483100 SW.TACT SKRGAAD010 BGE
PN651 WB213200 PIN L=70 WB21320 SW570 WD483100 SW.TACT SKRGAAD010
PN696 WB213200 PIN L=70 WB21320 SW571 WD483100 SW.TACT SKRGAAD010 BGE
PN697 WB213200 PIN L=70 WB21320 SW572 WD483100 SW.TACT SKRGAAD010
Q451 iC1815I0 TR 2SC1815 Y SW573 WD483100 SW.TACT SKRGAAD010 BGE
Q452 iA1015I0 TR 2SA1015 Y SW671 WD483100 SW.TACT SKRGAAD010
Q453 VD303700 TR 2SC3326 A,B SW691 VZ075500 SW.SLIDE SL14-22AM5F RL
Q454 VD303700 TR 2SC3326 A,B U551 WC746300 L.DTCT RPM7138-H9
Q455 VD303700 TR 2SC3326 A,B V551 WC173100 FL.DSPLY 16-BT-122GNK
Q456 VD303700 TR 2SC3326 A,B WA790800 SHEET
Q551 VV556400 TR 2SC2412K Q,R,S WA790900 SPACER 4.6/10/32
Q552 VV556400 TR 2SC2412K Q,R,S
Q553 VV556400 TR 2SC2412K Q,R,S
Q554 VV556400 TR 2SC2412K Q,R,S
Q555 VV556400 TR 2SC2412K Q,R,S * WE544300 P.C.B. MAIN UC
Q556 VV556400 TR 2SC2412K Q,R,S * WE544400 P.C.B. MAIN R
Q611 VZ725900 TR 2SD1938F S,T * WE544500 P.C.B. MAIN T
Q612 VZ725900 TR 2SD1938F S,T * WE544600 P.C.B. MAIN K
Q651 VK407600 TR 2SC4208A Q,R,S * WE544700 P.C.B. MAIN A
Q652 iA1015I0 TR 2SA1015 Y * WE544800 P.C.B. MAIN BGE
R431 VP940800 R.MTL.OXD 470Ω 1W * WE856900 P.C.B. MAIN (YEM) L
R432 VP940800 R.MTL.OXD 470Ω 1W CB101 VQ963000 CN.BS.PIN 9P
R483 HV753220 R.CAR.FP 2.2Ω 1/4W CB103 VK024700 CN.BS.PIN 3P
R484 HV753220 R.CAR.FP 2.2Ω 1/4W CB104 LB932040 CN.BS.PIN 4P
R589 HV755100 R.CAR.FP 100Ω 1/4W CB242 VM923600 CN.BS.PIN 13P
R592 HV755100 R.CAR.FP 100Ω 1/4W CB244 VQ963300 CN.BS.PIN 12P
R651 HV753470 R.CAR.FP 4.7Ω 1/4W CB246 VF728200 CN.BS.PIN 10P
R652 HV753470 R.CAR.FP 4.7Ω 1/4W CB247 VQ963000 CN.BS.PIN 9P
R657 HV753100 R.CAR.FP 1Ω 1/4W CB248 VQ044400 CN.BS.PIN 9P
R658 HV753100 R.CAR.FP 1Ω 1/4W CB249 VQ963500 CN.BS.PIN 14P
R660 VP939500 R.MTL.FLM 1Ω 1W CB372 WC050700 CLIP.FUSE EYF52BCY
R663 HV753100 R.CAR.FP 1Ω 1/4W CB373 WC050700 CLIP.FUSE EYF52BCY
R664 HV753100 R.CAR.FP 1Ω 1/4W CB374 VG879900 CN.BS.PIN 2P
ST431 WA789700 SCR.TERM CB375 VG879900 CN.BS.PIN 2P
ST451 WA789600 SCR.TERM M3 CB381 LB933050 CN.BS.PIN 5P SE VH UC
RX-V357/HTR-5830

SW551 V9281300 SW.RT.ENC EVEKD2F3024B CB391 VK026400 CN.BS.PIN 5P

SW552 WD483100 SW.TACT SKRGAAD010 CB701 VB858300 CN.BS.PIN 4P
SW553 WD483100 SW.TACT SKRGAAD010 C101 UA654100 C.MYLAR 0.01uF 50V
SW554 WD483100 SW.TACT SKRGAAD010 C102 UR877100 C.EL 10uF 63V
SW555 WD483100 SW.TACT SKRGAAD010 C103 UR877100 C.EL 10uF 63V
SW556 WD483100 SW.TACT SKRGAAD010 C104 UR877100 C.EL 10uF 63V
SW557 WD483100 SW.TACT SKRGAAD010 C105 UR877100 C.EL 10uF 63V
SW558 WD483100 SW.TACT SKRGAAD010 C106 UR877100 C.EL 10uF 63V
SW559 WD483100 SW.TACT SKRGAAD010 C107 UA652220 C.MYLAR 220pF 50V
SW560 WD483100 SW.TACT SKRGAAD010 C108 UA652220 C.MYLAR 220pF 50V
SW561 WD483100 SW.TACT SKRGAAD010 C109 UA652220 C.MYLAR 220pF 50V
SW562 WD483100 SW.TACT SKRGAAD010 C110 UA652220 C.MYLAR 220pF 50V
SW563 WD483100 SW.TACT SKRGAAD010 C111 UA652220 C.MYLAR 220pF 50V
SW564 WD483100 SW.TACT SKRGAAD010 C112 UR877100 C.EL 10uF 63V
SW565 WD483100 SW.TACT SKRGAAD010 C113 UR877100 C.EL 10uF 63V
✻ New Parts ✻ New Parts
62
 RX-V357/HTR-5830

P.C.B. MAIN P.C.B. MAIN

Schm Schm
Ref. PART NO. Description Markets Ref. PART NO. Description Markets
C114 UR867330 C.EL 33uF 50V C168 UA652470 C.MYLAR 470pF 50V KABGE
C115 UA652100 C.MYLAR 100pF 50V C243 UR819100 C.EL 1000uF 6.3V
C116 UR877100 C.EL 10uF 63V C244 UR819100 C.EL 1000uF 6.3V
C117 UR877220 C.EL 22uF 63V C248 UR866100 C.EL 1uF 50V
C118 UR877100 C.EL 10uF 63V C253 UR857470 C.EL 47uF 35V
C119 UR877220 C.EL 22uF 63V C254 UR877100 C.EL 10uF 63V
C120 FG651100 C.CE 10pF 50V C256 UR847470 C.EL 47uF 25V
C122 UR877100 C.EL 10uF 63V C258 WB165500 C.EL 0.33F 5.5V
C123 UR877100 C.EL 10uF 63V C259 UR818220 C.EL 220uF 6.3V
C124 UR877100 C.EL 10uF 63V C260 UR847470 C.EL 47uF 25V
C125 UA652100 C.MYLAR 100pF 50V C261 UR837330 C.EL 33uF 16V
C126 UA652100 C.MYLAR 100pF 50V C263 UR877100 C.EL 10uF 63V
C127 UR867330 C.EL 33uF 50V C264 UR818470 C.EL 470uF 6.3V
C128 UR867330 C.EL 33uF 50V C274 UR847470 C.EL 47uF 25V BGE
C129 UR867330 C.EL 33uF 50V C275 UR847470 C.EL 47uF 25V BGE
C130 UR867330 C.EL 33uF 50V C277 VA761100 C.CE 27pF 50V BGE
C131 UA652100 C.MYLAR 100pF 50V C279 VA761100 C.CE 27pF 50V BGE
C132 UR877220 C.EL 22uF 63V C280 UR847470 C.EL 47uF 25V BGE
C133 UA652100 C.MYLAR 100pF 50V C283 UR866220 C.EL 2.2uF 50V
C135 FG651100 C.CE 10pF 50V C284 UR866220 C.EL 2.2uF 50V
C136 FG651100 C.CE 10pF 50V C285 UR866220 C.EL 2.2uF 50V
C137 FG651100 C.CE 10pF 50V C286 UR866220 C.EL 2.2uF 50V
C138 FG651100 C.CE 10pF 50V C371 UR858470 C.EL 470uF 35V
C139 VE326000 C.MYLAR.ML 0.1uF 50V C372 UA654100 C.MYLAR 0.01uF 50V
C140 VE326000 C.MYLAR.ML 0.1uF 50V C373 UR897100 C.EL 10uF 100V RL
C141 VE326000 C.MYLAR.ML 0.1uF 50V C374 UA654100 C.MYLAR 0.01uF 50V UCTKABGE
C142 VE326000 C.MYLAR.ML 0.1uF 50V C375 UA654100 C.MYLAR 0.01uF 50V RL
C143 VE326000 C.MYLAR.ML 0.1uF 50V C376 UA654100 C.MYLAR 0.01uF 50V RL
C144 UR876470 C.EL 4.7uF 63V s C377 WB121400 C.CE.SAFTY 0.01uF 295V
C145 UR828220 C.EL 220uF 10V C381 UR877100 C.EL 10uF 63V UC
C146 UR858100 C.EL 100uF 35V C382 UR877100 C.EL 10uF 63V UC
C147 UR866470 C.EL 4.7uF 50V C393 UR877100 C.EL 10uF 63V
C148 UA654100 C.MYLAR 0.01uF 50V RTKABGEL C394 UR877100 C.EL 10uF 63V
C149 UR868100 C.EL 100uF 50V C395 UR877100 C.EL 10uF 63V
C150 UA654100 C.MYLAR 0.01uF 50V RTKABGEL C396 UR877100 C.EL 10uF 63V
C151 UA654100 C.MYLAR 0.01uF 50V C397 UR829100 C.EL 1000uF 10V
* C152 WE514200 C.EL 6800uF 63V UCRTKAL C398 UR829100 C.EL 1000uF 10V
C152 WC998700 C.EL 6800uF 63V BGE C401 UR838100 C.EL 100uF 16V

RX-V357/HTR-5830
* C153 WE514200 C.EL 6800uF 63V UCRTKAL C411 UA654100 C.MYLAR 0.01uF 50V RTKABGEL
C153 WC998700 C.EL 6800uF 63V BGE C412 UA654100 C.MYLAR 0.01uF 50V RTKABGEL
C154 UA654100 C.MYLAR 0.01uF 50V KABGEL C415 UA654100 C.MYLAR 0.01uF 50V KABGEL
C155 UA654100 C.MYLAR 0.01uF 50V KABGEL C416 UA654100 C.MYLAR 0.01uF 50V KABGEL
C156 UA654100 C.MYLAR 0.01uF 50V KABGEL C417 UA652100 C.MYLAR 100pF 50V KABGE
C157 UA654100 C.MYLAR 0.01uF 50V KABGEL C418 UA652470 C.MYLAR 470pF 50V KABGEL
C158 UA654100 C.MYLAR 0.01uF 50V C707 UR877100 C.EL 10uF 63V
C159 VR324900 C.MYLAR 0.1uF 100V C708 UR877100 C.EL 10uF 63V
C160 VR324900 C.MYLAR 0.1uF 100V C709 UR837100 C.EL 10uF 16V
C161 UR866100 C.EL 1uF 50V C710 UR837100 C.EL 10uF 16V
C162 UA654100 C.MYLAR 0.01uF 50V RTKABGEL C711 UR837100 C.EL 10uF 16V
C163 UA654100 C.MYLAR 0.01uF 50V RTKABGEL D101 VT332900 DIODE 1SS355
C164 UA652100 C.MYLAR 100pF 50V KABGE D102 VT332900 DIODE 1SS355
C165 UA652100 C.MYLAR 100pF 50V KABGE s D103 VD631600 DIODE 1SS133,176
C167 UA652470 C.MYLAR 470pF 50V KABGE D107 WC398800 DIODE KDS160-RTK
✻ New Parts ✻ New Parts
63
 RX-V357/HTR-5830

P.C.B. MAIN P.C.B. MAIN

Schm Schm
Ref. PART NO. Description Markets Ref. PART NO. Description Markets
D108 VN008700 DIODE 1SS270A IC702 X2904A00 IC NJM2581M VIDEO AMP
D109 VN008700 DIODE 1SS270A PJ391 V7190000 JACK.PIN 2P
D110 WC398800 DIODE KDS160-RTK PJ392 V7190000 JACK.PIN 2P
D111 VN008700 DIODE 1SS270A PJ393 V7190000 JACK.PIN 2P
D112 VN008700 DIODE 1SS270A PJ701 V8143900 JACK PIN 9P SHIELD YKC21
D113 VN008700 DIODE 1SS270A PN391 WB213200 PIN L=70 WB21320
D114 VN008700 DIODE 1SS270A PN412 WB213200 PIN L=70 WB21320
D115 VN008700 DIODE 1SS270A PN701 WB213200 PIN L=70 WB21320
D116 VU171900 DIODE.ZENR UDZ5.1B 5.1V s Q101 VD303700 TR 2SC3326 A,B
D117 VN008700 DIODE 1SS270A s Q102 VD303700 TR 2SC3326 A,B
D118 VD631600 DIODE 1SS133,176 s Q103 VD303700 TR 2SC3326 A,B
D119 VD631600 DIODE 1SS133,176 s Q104 VD303700 TR 2SC3326 A,B
s D120 VG443200 DIODE.ZENR MTZJ30A 30V s Q105 VD303700 TR 2SC3326 A,B
D121 VD631600 DIODE 1SS133,176 Q106 V3966800 TR 2SA949 O,Y
s D122 WA653200 DIODE.BRG TS6P03G 6.0A 200V Q107 WC398400 TR 2SC2N5551C-AT
D123 VD631600 DIODE 1SS133,176 s Q108 VC407900 TR 2SD1913 R,S
D241 VT332900 DIODE 1SS355 Q112 WC398400 TR 2SC2N5551C-AT
D242 VT332900 DIODE 1SS355 Q113 WC398400 TR 2SC2N5551C-AT
D243 VU172200 DIODE.ZENR UDZ6.8B 6.8V Q114 WC398400 TR 2SC2N5551C-AT
D244 VT332900 DIODE 1SS355 Q115 WC398400 TR 2SC2N5551C-AT
D245 VU172100 DIODE.ZENR UDZS6.2B 6.2V Q116 WC398400 TR 2SC2N5551C-AT
D246 VT332900 DIODE 1SS355 Q117 WC397700 TR 2SA2N5401C-AT
D247 VT332900 DIODE 1SS355 Q118 WC434900 TR.DGT KRA104S-RTK
D249 VT332900 DIODE 1SS355 Q119 WC434900 TR.DGT KRA104S-RTK
D250 VU995500 DIODE.ZENR MA8100-H 10.3V Q120 WC434900 TR.DGT KRA104S-RTK
D251 VT332900 DIODE 1SS355 Q121 iA1015I0 TR 2SA1015 Y
D252 VU171900 DIODE.ZENR UDZ5.1B 5.1V Q122 WC434900 TR.DGT KRA104S-RTK
D253 VT332900 DIODE 1SS355 UC Q123 iC1815I0 TR 2SC1815 Y
D254 VU171900 DIODE.ZENR UDZ5.1B 5.1V Q124 WC434900 TR.DGT KRA104S-RTK
D255 VU171900 DIODE.ZENR UDZ5.1B 5.1V Q243 VP872700 TR 2SC4488 S,T
D256 VU171900 DIODE.ZENR UDZ5.1B 5.1V Q244 VP872600 TR 2SA1708 S,T
D257 VU171900 DIODE.ZENR UDZ5.1B 5.1V Q245 WC435000 TR.DGT KRC102S-RTK
D258 VU171900 DIODE.ZENR UDZ5.1B 5.1V Q246 WC435100 TR.DGT KRC104S-RTK
D259 VU171900 DIODE.ZENR UDZ5.1B 5.1V Q247 iC1815I0 TR 2SC1815 Y
D371 VD631600 DIODE 1SS133,176 Q248 WC435100 TR.DGT KRC104S-RTK
D372 VG437000 DIODE.ZENR MTZJ4.7A 4.7V RL Q249 VP872700 TR 2SC4488 S,T RL
s D373 VS997800 DIODE 1T2 Q250 WC435100 TR.DGT KRC104S-RTK
s D374 VS997800 DIODE 1T2 Q251 iC174020 TR 2SC1740S QRS BGE
RX-V357/HTR-5830

s D375 VS997800 DIODE 1T2 RL Q252 WC435100 TR.DGT KRC104S-RTK

s D376 VS997800 DIODE 1T2 Q253 VV556400 TR 2SC2412K Q,R,S UC
s D377 VS997800 DIODE 1T2 Q254 VV556500 TR 2SA1037K Q,R,S
D381 VT532500 DIODE 1SR154-400 UC Q255 VV556500 TR 2SA1037K Q,R,S
D382 VT532500 DIODE 1SR154-400 UC Q256 VV556500 TR 2SA1037K Q,R,S
D411 VD631600 DIODE 1SS133,176 Q257 VV556500 TR 2SA1037K Q,R,S
s F371 WB221200 FUSE T6A 125V UCRL Q258 VV556500 TR 2SA1037K Q,R,S
s F371 VV071700 FUSE TSD 3.15A 250V SEM TKABGE Q259 VV556400 TR 2SC2412K Q,R,S
s IC101 X5064A00 IC STK404-130Y 130W Q260 VV556500 TR 2SA1037K Q,R,S
s IC102 X5063A00 IC STK403-130Y 130W Q261 VV556400 TR 2SC2412K Q,R,S
s IC103 X5063A00 IC STK403-130Y 130W Q262 WC398600 TR.DGT KRA104M-AT
IC241 X0082A00 IC LC72722PM BGE Q371 VE198800 TR 2SC2705 O,Y
* IC242 X6305A00 IC.CPU M30626FHPFP(written) Q372 iA1015I0 TR 2SA1015 Y RL
IC391 XH436A00 IC LA7956 Q373 VP872600 TR 2SA1708 S,T RL
IC701 XY879A00 IC TC74HC4053AF(EL) Q374 iA1015I0 TR 2SA1015 Y RL
✻ New Parts ✻ New Parts
64
 RX-V357/HTR-5830

P.C.B. MAIN P.C.B. MAIN CHIP PARTS

Schm Schm Schm

Ref. PART NO. Description Markets Ref. PART NO. Description Markets Ref. PART NO. Description Markets
Q375 WC529200 TR.DGT KRC102M-AT RL RY411 V5966300 RELAY DS24D2-OS(M) US061100 C.CE.M.CHP 10pF 50V
Q391 iC1815I0 TR 2SC1815 Y ST241 WA789600 SCR.TERM M3 US061180 C.CE.CHP 18pF 50V
Q392 iC1815I0 TR 2SC1815 Y ST371 WA789600 SCR.TERM M3 US061220 C.CE.M.CHP 22pF 50V
Q393 iC174020 TR 2SC1740S QRS SW381 VZ075500 SW.SLIDE SL14-22AM5F UC US061330 C.CE.M.CHP 33pF 50V
Q701 VD303700 TR 2SC3326 A,B s T371 XW606A00 TRANS.PWR UC US061470 C.CE.M.CHP 47pF 50V
R121 HV753220 R.CAR.FP 2.2Ω 1/4W s T371 XW974A00 TRANS.PWR RL US062100 C.CE.M.CHP 100pF 50V
R122 HV753220 R.CAR.FP 2.2Ω 1/4W s T371 XW608A00 TRANS.PWR TKABGE US062220 C.CE.CHP 220pF 50V
R125 HV753220 R.CAR.FP 2.2Ω 1/4W TE101 VY696300 TERM.SP 4P UCRTA US062330 C.CE.M.CHP 330pF 50V
R126 HV753220 R.CAR.FP 2.2Ω 1/4W TE101 VY696400 TERM.SP 4P KBGEL US062470 C.CE.M.CHP 470pF 50V
s R129 HV754470 R.CAR.FP 47Ω 1/4W TE102 WB054000 TERM.SP YKD21-5002N US062560 C.CE.CHP 560pF 50V
R130 HV753220 R.CAR.FP 2.2Ω 1/4W TE411 WB054100 TERM.SP YKD21-5004N US063100 C.CE.M.CHP 1000pF 50V
R132 HV753220 R.CAR.FP 2.2Ω 1/4W XL241 V3930900 RSNR.CRYS 4.332MHz BGE US063470 C.CE.CHP 4700pF 50V
s R133 HV754100 R.CAR.FP 10Ω 1/4W XL242 WB213000 RSNR.CE 16.0MHz US064100 C.CE.M.CHP 0.01uF 50V
s R143 HV756470 R.CAR.FP 4.7KΩ 1/4W EP600140 SCR.BND.HD 3x10 MFZN2BL US135100 C.CE.CHP 0.1uF 16V
s R144 HV754100 R.CAR.FP 10Ω 1/4W US135220 C.CE.CHP 0.22uF 16V
R148 WB279900 R.WW RGC55C 0.22+0.22 RD350000 R.CHP 0Ω 1/16W
R156 WB279900 R.WW RGC55C 0.22+0.22 RD353220 R.CHP 2.2Ω 1/16W
R157 WB279900 R.WW RGC55C 0.22+0.22 RD354150 R.CHP 15Ω 1/16W
R158 WB279900 R.WW RGC55C 0.22+0.22 RD354470 R.CHP 47Ω 1/16W
R159 WB279900 R.WW RGC55C 0.22+0.22 RD354750 R.CHP 75Ω 1/16W
R166 HV753470 R.CAR.FP 4.7Ω 1/4W RD354820 R.CHP 82Ω 1/16W
s R171 VP939700 R.MTL.FLM 4.7Ω 1W RD355100 R.CHP 100Ω 1/16W
R178 HV753470 R.CAR.FP 4.7Ω 1/4W RD355220 R.CHP 220Ω 1/16W
R180 HV753470 R.CAR.FP 4.7Ω 1/4W RD355470 R.CHP 470Ω 1/16W
R182 HV753470 R.CAR.FP 4.7Ω 1/4W RD355560 R.CHP 560Ω 1/16W
R184 HV753470 R.CAR.FP 4.7Ω 1/4W RD355680 R.CHP 680Ω 1/16W
s R190 VP939700 R.MTL.FLM 4.7Ω 1W RD355820 R.CHP 820Ω 1/16W
s R191 VP939700 R.MTL.FLM 4.7Ω 1W RD356100 R.CHP 1KΩ 1/16W
s R192 VP939700 R.MTL.FLM 4.7Ω 1W RD356150 R.CHP 1.5KΩ 1/16W
s R193 VP939700 R.MTL.FLM 4.7Ω 1W RD356180 R.CHP 1.8KΩ 1/16W
R198 HV756470 R.CAR.FP 4.7KΩ 1/4W RD356200 R.CHP 2KΩ 1/16W
R201 HV755330 R.CAR.FP 330Ω 1/4W RD356220 R.CHP 2.2KΩ 1/16W
R204 HV753220 R.CAR.FP 2.2Ω 1/4W RTKABGEL RD356240 R.CHP 2.4KΩ 1/16W
R206 HV753220 R.CAR.FP 2.2Ω 1/4W RTKABGEL RD356330 R.CHP 3.3KΩ 1/16W
R208 HV753220 R.CAR.FP 2.2Ω 1/4W RD356470 R.CHP 4.7KΩ 1/16W
R216 HV753220 R.CAR.FP 2.2Ω 1/4W RTKABGEL RD356510 R.CHP 5.1KΩ 1/16W
R217 HV753220 R.CAR.FP 2.2Ω 1/4W RTKABGEL RD356560 R.CHP 5.6KΩ 1/16W
R219 HV754100 R.CAR.FP 10Ω 1/4W KABGEL RD356680 R.CHP 6.8KΩ 1/16W
R220 HV754100 R.CAR.FP 10Ω 1/4W KABGEL RD356820 R.CHP 8.2KΩ 1/16W
R378 VC757900 R.MTL.OXD 47Ω 2W RL RD357100 R.CHP 10KΩ 1/16W
R380 V6730000 R.CAR. 2.2MΩ 1/2W UC RD357150 R.CHP 15KΩ 1/16W
R381 HV753100 R.CAR.FP 1Ω 1/4W UC RD357180 R.CHP 18KΩ 1/16W
R382 HV753100 R.CAR.FP 1Ω 1/4W UC RD357220 R.CHP 22KΩ 1/16W
R399 HV755270 R.CAR.FP 270Ω 1/4W RD357330 R.CHP 33KΩ 1/16W
R405 HV753220 R.CAR.FP 2.2Ω 1/4W RD357470 R.CHP 47KΩ 1/16W
R411 HV753220 R.CAR.FP 2.2Ω 1/4W RTKABGEL RD357680 R.CHP 68KΩ 1/16W
R414 HV753220 R.CAR.FP 2.2Ω 1/4W RTKABGEL RD358100 R.CHP 100KΩ 1/16W
R415 HV754100 R.CAR.FP 10Ω 1/4W KABGEL RD358220 R.CHP 220KΩ 1/16W
RY101 V5966300 RELAY DS24D2-OS(M) RD358470 R.CHP 470KΩ 1/16W
RY102 V5966300 RELAY DS24D2-OS(M) RD359100 R.CHP 1MΩ 1/16W
RY104 V5178900 RELAY DC DQ24D1-OS(M)
RY105 V5966300 RELAY DS24D2-OS(M)
s RY371 V2712300 RELAY DC SDT-S-112LMR
✻ New Parts ✻ New Parts ✻ New Parts

65
 A B C D E F G H I J
RX-V357/HTR-5830

1
■ EXPLODED VIEW
101 U, C models R, L models
103 164 103 164

171 172
5 (6) 1-1 (7)
172
2
1-25 1-1 (10) 1-25

1-25
17

16

3 103
1-25
163 1-1 (5) 171 160
5 (4) 160
2-104
1-6 1-1 (2)
160
150
2-20
1-5
4 1-2 168
5 (5)
1-1 (8)
1-25
5 (1) 160
168 2-104 167 1-1 (4)
5
163 167 (3)
23
168
1-13 15 170 2-103
1-4 1-1
12 (3)
170 167
5
121
163 5 (2)
1-1 (6)
U, C, R, T, K,
A, L models 167
2-104
B, G, E models 109 2-7 1-1 (1)
151
200
6
1-1 (9)
201

200-1 201-1 203 2-1

120
160
163 167
202 152 120
7 202
U, C, R, T, L models K, A, B, G, E models 163
66
 RX-V357/HTR-5830

■ MECHANICAL PARTS

Schm Schm
Ref. PART NO. Description Remarks Markets Ref. PART NO. Description Remarks Markets
* 1-1 WE545000 P.C.B. ASS'Y FUNCTION UCTKA * 101 WE065200 TOP COVER GD T
* 1-1 WE545100 P.C.B. ASS'Y FUNCTION R * 101 WE538700 TOP COVER GD (YEM) L
* 1-1 WE545200 P.C.B. ASS'Y FUNCTION BGE * 101 WE065000 TOP COVER BL
* 1-1 WE857100 P.C.B. ASS'Y FUNCTION (YEM) L * 101 WE538900 TOP COVER SI (YEM) UCRKABGEL
1-2 MF114180 FLEXIBLE FLAT CABLE 14P 180mm P=1.25 * 101 WE065100 TOP COVER SI T
* 1-4 WE066700 FRONT PANEL ASS'Y V357GD * 103 WE065600 REAR PANEL V357 UC
* 1-4 WE233600 FRONT PANEL ASS'Y V357BL * 103 WE065700 REAR PANEL V357 R
* 1-4 WE066800 FRONT PANEL ASS'Y V357SI * 103 WE065800 REAR PANEL V357 TK
* 1-4 WE067200 FRONT PANEL ASS'Y 5830GD * 103 WE233500 REAR PANEL V357 A
* 1-4 WE067100 FRONT PANEL ASS'Y 5830BL * 103 WE066000 REAR PANEL V357 BGE
* 1-4 WE067300 FRONT PANEL ASS'Y 5830SI UCRTKA * 103 WE065900 REAR PANEL V357 (YEM) L
* 1-4 WE762000 FRONT PANEL ASS'Y 5830SI BGE * 103 WE066100 REAR PANEL 5830 UC
1-5 WC411600 BUTTONCASE 350 V357GD,5830GD * 103 WE066200 REAR PANEL 5830 R
1-5 WC411500 BUTTONCASE 350 V357BL * 103 WE066300 REAR PANEL 5830 TK
1-5 WC411800 BUTTONCASE 350 5730BL * 103 WE066400 REAR PANEL 5830 A
1-5 WC411700 BUTTONCASE 350 V357SI,5830SI * 103 WE066500 REAR PANEL 5830 BGE
1-6 WC411900 BUTTON/RDS 350 BGE 109 WA796100 SUPPORT/PCB
1-13 WC910400 SHEET, WINDOW V357,5830 UCRKAL 120 WA790600 LEG (GD) D60/H21 GD T
1-13 WC412800 SHEET, WINDOW V357,5830 T 120 V0042500 LEG (GD) D60/H21 GD (YEM) L
* 1-13 WE813800 SHEET, WINDOW V357 BGE 120 VS025000 LEG (HS) D60/H21 V357BL,SI
* 1-13 WE814900 SHEET, WINDOW 5830 GE 120 WA790700 LEG (BL) D60/H21 5830BL
* 1-25 WE774800 BIND HEAD P-TIGHT SCREW 3x8 MFZN2W3 * 121 WE064300 KNOB D48 VOLUME GD
* 2-1 WD044200 P.C.B. ASS'Y DSP (YEM) UCRKABGEL * 121 WE064200 KNOB D48 VOLUME BL
* 2-1 WE741100 P.C.B. ASS'Y DSP T * 121 WE064400 KNOB D48 VOLUME SI
2-7 MF111070 FLEXIBLE FLAT CABLE 11P 70mm P=1.25 150 VU590000 BINDING TIE CBTD001B
2-20 WC656000 SUPPORT/TR 5P 151 WB870100 DAMPER
* 2-103 WE774600 SCREW IC 3x18 MFZN2W3 152 WC879000 DAMPER
2-104 VT669300 PW HEAD B-TIGHT SCREW 3x8-8 MFC2 * 160 WE774100 BIND HEAD BONDING B-T. SCREW 3x8 MFZN2B3
* 5 WE544300 P.C.B. ASS'Y MAIN UC * 163 WE774300 BIND HEAD B-TIGHT SCREW 3x8 MFZN2W3
* 5 WE544400 P.C.B. ASS'Y MAIN R * 164 WE774000 BIND HEAD SCREW 3x6 MFZN2W3 UCR
* 5 WE544500 P.C.B. ASS'Y MAIN T 167 VT669300 PW HEAD B-TIGHT SCREW 3x8-8 MFC2
* 5 WE544600 P.C.B. ASS'Y MAIN K * 168 WE774600 SCREW IC 3x18 MFZN2W3
* 5 WE544700 P.C.B. ASS'Y MAIN A * 170 WE774700 BIND HEAD S-TIGHT SCREW 4x10 MFZN2W3
* 5 WE544800 P.C.B. ASS'Y MAIN BGE 171 VD069600 PW HEAD S-TIGHT SCREW 4x8-10 MFNI33 GD,SI
* 5 WE856900 P.C.B. ASS'Y MAIN (YEM) L 171 VH313200 PW HEAD S-TIGHT SCREW 4x8-10 MFNI3BL BL
12 WB424000 AM/FM TUNER ENG06709Q UCRTL * 172 WE200400 DISH HEAD B-TIGHT SCREW 3x6 MFNI33 GD,SI
12 WB424100 AM/FM TUNER ENG07711Q KABGE * 172 WE200500 DISH HEAD B-TIGHT SCREW 3x6 MFNI3BL BL
s 15 X6311A00 POWER TRANSFORMER UC
* s 15 X5278B00 POWER TRANSFORMER RL ACCESSORIES
* s 15 X5279B00 POWER TRANSFORMER TK 200 WA220300 REMOTE CONTROL RAV300 RRC4001-1001LC UCRTKAL
* s 15 X5280B00 POWER TRANSFORMER A 200-1 AAX46580 BATTERY COVER 103RRC-244-01G UCRTKAL
s 15 X5275B00 POWER TRANSFORMER BGE 201 WA617700 REMOTE CONTROL RAV16 RC1112921/00 BGE
s 16 WB120500 POWER CABLE 2m UC 201-1 AAX49660 BATTERY COVER 3139 224 22451 BGE
s 16 WC992700 POWER CABLE 2m R 202 V6267000 INDOOR FM ANTENNA 1.4m 1pc (YEM) UCRL
s 16 WB120600 POWER CABLE 2m T 202 WB212500 INDOOR FM ANTENNA 1.4m 1pc T
s 16 WC753000 POWER CABLE 2m K 202 WB212400 INDOOR FM ANTENNA 1.4m 1pc KABGE
s 16 WC743700 POWER CABLE 2m A 203 VR248500 AM LOOP ANTENNA 1.0m 1pc (YEM) UCRKABGEL
s 16 WB212200 POWER CABLE 2m B 203 WB212600 AM LOOP ANTENNA 1.0m 1pc T
s 16 WB212300 POWER CABLE 2m GE BATTERY, MANGANESE DRY R6CP 2pcs
s 16 VN363600 POWER CABLE 2m (YEM) L
17 V2438700 CORD STOPPER 10P1
23 MF113140 FLEXIBLE FLAT CABLE 13P 140mm P=1.25
✻ New Parts ✻ New Parts

67
 A B C D E F G H I J
RX-V357/HTR-5830

1 ■ REMOTE CONTROL RAV300 (U, C, R, T, K, A, L models)

● SCHEMATIC DIAGRAM
Key CODE
R3 Function
No. AMP CD MD CD-R TUNER DVD (P) DVD (Y) DVD (M) DVD-R (P)
0Ω
JP1 JP2 1 TV POWER – – – – – – – – –
+ + 1 30 2 AV POWER – – – 7F-80 – A5-AA 7C-80 3D-8D A5-AA
P0D2 P1A2
C1 C2 3 STANDBY 7A-1E – – – – – – – –
3.0V 47µF 220µF 2 29 4 SYSTEM POWER
OPEN P0D3 P0D1 7A-1D – – – – – – – –
5 CD 7A-15 – – – – – – – –
2 3
P1B/INT P0D0
28
6 MD/CD-R 7A-C9 – – – – – – – –
4 27 7 TUNER 7A-16 – – – – – – – –
P0E0 P0C3
8 SLEEP 7A-57 – – – – – – – –
5 26 9 DVD
P0E1 P0C2 7A-C1 – – – – – – – –
R1

IC1: µPD17242MC-114
2Ω (1/4W) 10 D-TV/CBL 7A-54 – – – – – – – –
6 25
D1 P0E2 P0C1 11 VCR 7A-0F – – – – – – – –
SID303C-01
7 24 12 V-AUX 7A-55 – – – – – – – –
P0E3 P0C0
R2 SLEEP 6CH INPUT AMP VOLUME - 7 MENU 13 REC, DISC SKIP – 7A-4F 79-AF – – 55-56 7C-8B – 56-5A
22Ω 8 23 14 PAUSE
Q1 REM P0B3 – 7A-09 79-A9 7F-83 – AA-5A 7C-83 06-B6 AA-5A
TUNER AUDIO FF VOLUME + 8

>
2SC3265-Y C3 15 AUDIO – – – – – 95-A6 7C-AD 33-83 95-A6
9 22
VDD P0B2 16 6CH INPUT 7A-87 – – – – – – – –
3 0.1µF
MD/CD-R PAUSE STOP INPUT 5 TITLE DISPLAY
10 21 17 SKIP - – 7A-0B 79-AB 7F-86 – 6A-9A 7CB9 49-F9 6A-9A
XOUT P0B1
CD REC REW CH - 4 ENTER 18 PLAY – 7A-08 79-A8 7F-82 – A5-9A 7C-82 0A-BA A5-9A

<
X1 11 20
T1 XIN P0B0 19 SKIP + – 7A-0A 79-AE 7F-87 – AA-9A 7C-BA 4A-FA AA-9A
4MHz SYSTEM POWER V-AUX CODE SET CH + 3 +10 RETURN
20 CODE SET – – – – – – – – –
12 19
GND P0A3 21 REW – 7A-0D 79-AC 7F-88 – 69-9A 7C-86 04-B4 69-9A
STANDBY VCR SKIP + MUTE 2 0 >
D3 R4
RLS-73 100kΩ 13 18 22 STOP – 7A-09 79-AA 7F-84 – 6A-5A 7C-85 00-B0 6A-5A
RESETPU P0A2
AV POWER D-TV/CBL PLAY VOL - 1 9 SELECT 23 FF – 7A-0C 79-AD 7F-89 – A9-9A 7C-87 05-B5 A9-9A
2 14 17
1 24 AMP – – – – – – – – –
IC2 2.1V P1A0 P0A1
3 TV POWER DVD SKIP- VOL + MUTE 8 <
C4 25 TV VOL + – – – – – – – – –
T2 15 16
0.1µF P1A1 P0A0 26 TV VOL – – – – – – – – – –
4 27 TV MUTE – – – – – – – – –
28 TV CH + – – – – – – – – –
29 TV CH – – – – – – – – – –
NOT MOUNTED 30 TV INPUT – – – – – – – – –
31 VOLUME + 7A-1A – – – – – – – –
32 VOLUME – 7A-1B – – – – – – – –
33 MUTE 7A-1C – – – – – – – –
34 1 7A-88 79-11 79-85 7F-91 7A-E5 6A-AA 7C-94 10-A0 6A-AA
35 2 7A-89 79-12 79-86 7F-92 7A-E6 9A-AA 7C-95 11-A1 9A-AA
36 3 7A-8A 79-13 79-87 7F-93 7A-E7 5A-AA 7C-96 12-A2 5A-AA
5 37 4 7A-8B 79-14 79-88 7F-94 7A-E8 A6-AA 7C-97 13-A3 A6-AA
38 5 7A-8C 79-15 79-89 7F-95 7A-E9 66-AA 7C-98 14-A4 66-AA
39 6 7A-8D 79-16 79-8A 7F-96 7A-EA 96-AA 7C-99 15-A5 96-AA
40 7 7A-8E 79-17 79-8B 7F-97 7A-EB 56-AA 7C-9A 16-A6 56-AA
41 8 7A-8F 79-18 79-8C 7F-98 7A-EC A9-AA 7C-9B 17-A7 A9-AA
42 9 7A-90 79-19 79-8D 7F-99 – 69-AA 7C-9C 18-A8 69-AA
43 0 7A-95 79-10 79-8E 7F-90 – AA-AA 7C-93 19-A9 AA-AA
44 +10 7A-97 79-1A 79-8F 7F-9A – A9-56 7C-9D 89-39 A9-56
45 ENTER 7A-56 79-0B – 7F-8A – A9-A5 7C-9E – A9-A5
46 TITLE 7A-86 – – – – 6A-56 7C-B1 9B-2B 6A-56

>
47 7A-98 – – – 7A-10 A9-66 7C-B4 85-35 A9-66
6 48 MENU 7A-9C – – – 7A-12 A6-66 7C-B2 80-30 A6-66
49 < 7A-53 – – – – 99-66 7C-B5 87-37 99-66
50 SELECT – – – – – A5-66 7C-B8 82-32 A5-66
51 > 7A-52 – – – – 59-66 7C-B6 88-38 59-66
52 RETURN 7A-85 – – – – 5A-A9 7C-B7 81-31 5A-A9

<
53 7A-99 – – – 7A-11 69-66 7C-B3 86-36 69-66
54 DISPLAY – 79-0A 79-A5 7F-9E – 55-AA 7C-A6 92-22 55-AA

68
 A B C D E F G H I J
RX-V357/HTR-5830

1 ■ REMOTE CONTROL RAV16 (B, G, E models) Parts List for Carbon Resistors
Value 1/4W Type Part No. 1/6W Type Part No. Value 1/4W Type Part No. 1/6W Type Part No.
1.0 Ω HJ35 3100 HF85 3100 10 kΩ HF45 7100 HF45 7100

The schematic diagram is not available. 1.8 Ω HJ35 3180 ❊ 11 kΩ HF45 7110 HF45 7110
2.2 Ω HJ35 3220 HF85 3220 12 kΩ HJ35 7120 HF85 7120
3.3 Ω HJ35 3330 HF85 3330 13 kΩ HF45 7130 HF45 7130
4.7 Ω HJ35 3470 HF85 3470 15 kΩ HF45 7150 HF45 7150
5.6 Ω HJ35 3560 HF85 3560 18 kΩ HF45 7180 HF45 7180
2
CUSTOM CODE: 7A 10 Ω HF45 4100 HF45 4100 22 kΩ HF45 7220 HF45 7220
15 Ω HJ35 4150 HF85 4150 24 kΩ HF45 7240 HF45 7240
Key Key
Data Code
Key Key
Data Code 22 Ω HF45 4220 HF45 4220 27 kΩ HJ35 7270 HF85 7270
No. Name No. Name
27 Ω HJ35 4270 HF85 4270 30 kΩ HF45 7300 HF45 7300
1 DVD C1 18 VOLUME + 1A
2 D-TV/CBL 54 19 STEREO 56
33 Ω HF45 4330 HF45 4330 33 kΩ HF45 7330 HF45 7330

3 VCR 0F 20 PROG – 59 39 Ω HJ35 4470 HF85 4390 36 kΩ HF45 7360 HF45 7360
4 POWER 1F 21 MUTE 1C 47 Ω HF45 4470 HF45 4470 39 kΩ HF45 7390 HF45 7390
5 CD 15 22 PROG + 58 56 Ω HF45 4560 HF45 4560 47 kΩ HF45 7470 HF45 7470
6 MD/CD-R C9 23 LEVEL 86 68 Ω HF45 4680 HF45 4680 51 kΩ HF45 7510 HF45 7510
3 7 V-AUX 55 24 VOLUME – 1B 75 Ω HF45 4750 HF45 4750 56 kΩ HF45 7560 HF45 7560
8 6CH INPUT 87 25 SET MENU 9C 82 Ω HF45 4820 HF45 4820 62 kΩ HF45 7620 HF45 7620
9 TUNER 16 26 98
91 Ω HF45 4910 HF45 4910 68 kΩ HF45 7680 HF45 7680
10 A/B/C/D/E 12 27 ——— ———
100 Ω HF45 5100 HF45 5100 82 kΩ HF45 7820 HF45 7820
11 PRESET – 11 28 ——— ———
12 PRESET + 10 29 ——— ———
110 Ω HJ35 5110 HF85 5110 91 kΩ HF45 7910 HF45 7910

13 / DTS 90 30 99 120 Ω HF45 5120 HF45 5120 100 kΩ HF45 8100 HF45 8100
14 6.1 / 5.1 97 31 – 53 150 Ω HF45 5150 HF45 5150 110 kΩ HF45 8110 HF45 8110
15 NIGHT 95 32 + 52 160 Ω HJ35 5160 ❊ 120 kΩ HF45 8120 HF45 8120
16 SLEEP 57 33 ——— ——— 180 Ω HF45 5180 HF45 5180 150 kΩ HF45 8150 HF45 8150

4
17 TEST 85 200 Ω HF45 5200 HF45 5200 180 kΩ HF45 8180 HF45 8180
220 Ω HF45 5220 HF45 5220 220 kΩ HJ35 8220 HF85 8220
270 Ω HF45 5270 HF45 5270 270 kΩ HF45 8270 HF45 8270
330 Ω HF45 5330 HF45 5330 300 kΩ HF45 8300 HF45 8300
390 Ω HF45 5390 HF45 5390 330 kΩ HF45 8330 HF45 8330
430 Ω HF45 5430 HF45 5430 390 kΩ HJ35 8390 HF85 8390
470 Ω HF45 5470 HF45 5470 470 kΩ HF45 8470 HF45 8470
510 Ω HF45 5510 HF45 5510 560 kΩ HJ35 8560 HF85 8560
560 Ω HF45 5560 HF45 5560 680 kΩ HJ35 8680 HF85 8680
680 Ω HF45 5680 HF45 5680 820 kΩ HJ35 8820 HF85 8820
5 820 Ω HF45 5820 HF45 5820 1.0 MΩ HF45 9100 HF45 9100
910 Ω HF45 5910 HF45 5910 1.2 MΩ HJ35 9120 ❊
1.0 kΩ HF45 6100 HF45 6100 1.5 MΩ HJ35 9150 HF85 9150
1.2 kΩ HF45 6120 HF45 6120 1.8 MΩ HJ35 9180 HF85 9180
1.5 kΩ HF45 6150 HF45 6150 2.2 MΩ HJ35 9220 HF85 9220
1.8 kΩ HF45 6180 HF45 6180 3.3 MΩ HJ35 9330 HF85 9330
2.0 kΩ HJ35 6200 HF85 6200 3.9 MΩ HJ35 9390 ❊
2.2 kΩ HF45 6220 HF45 6220 4.7 MΩ HJ35 9470 HF85 9470
2.4 kΩ HJ35 6240 HF85 6240

6 2.7 kΩ HF45 6270 HF45 6270

3.0 kΩ HF45 6300 HF45 6300
3.3 kΩ HF45 6330 HF45 6330
1/4W Type
HF45
3.6 kΩ HJ35 6360 HF85 6360
1/4W Type 1/6W Type
3.9 kΩ HF45 6390 HF45 6390
HJ35 HF85
4.7 kΩ HF45 6470 HF45 6470 10mm
5mm
5.1 kΩ HF45 6510 HF45 6510
5.6 kΩ HF45 6560 HF45 6560
6.8 kΩ HF45 6680 HF45 6680
8.2 kΩ HF45 6820 HF45 6820
7
9.1 kΩ HF45 6910 HF45 6910

❊ : Not available
69
RX-V357/HTR-5830

本资料由ＯＫＸＩＡ视听皮带资源库ｗｗｗ．ｏｋｘｉａ．ｃｎ提供