Scribd
Upload
122 views3 pages

Ultra-compact 230V AC to 5V DC Power Module

This document describes a 3W ultra-compact power module that converts 230V AC power to 5V/3W DC power. It has features such as meeting UL and CE requirements, being ultra-thin and small, accepting a wide range of AC voltage inputs, and providing overload and short circuit protection. The module has high efficiency and power density and meets EMC and safety test requirements.

Uploaded by

Luiz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
122 views3 pages

Ultra-compact 230V AC to 5V DC Power Module

This document describes a 3W ultra-compact power module that converts 230V AC power to 5V/3W DC power. It has features such as meeting UL and CE requirements, being ultra-thin and small, accepting a wide range of AC voltage inputs, and providing overload and short circuit protection. The module has high efficiency and power density and meets EMC and safety test requirements.

Uploaded by

Luiz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

3W Ultra-compact Power Module HLK-PM01 230V AC to 5V/3W DC

220V AC to 5V DC, 600mA PCB Mounted Step-Down Power Supply Module

Features
 Meet UL, CE requirements,
 Ultra-thin, ultra-small
 All voltage input (AC: 90 ~ 264V)
 Low ripple and low noise
 Output overload and short circuit protection
 High efficiency, high power density
 The product is designed to meet the requirements of EMC and Safety Test
 Low power consumption, environmental protection, no-load loss <0.1W

Electrical Characteristics
 Rated input voltage: 100-240 VAC
 Input voltage range: 90-264 VAC
 Maximum input voltage: ≤270 VAC
 Maximum input current: ≤0.2 A
 Input current surge: ≤10 A
 Enter slow start: ≤50 ms
 Input Low Voltage Efficiency: Vin=110VAC Output full-load≥69%
 Input High Voltage Efficiency: Vin=220VAC output full-load≥70%
 Long-term reliability: MTBF≥100 000 h
 Load rated output voltage: +5 VDC ±0.1
 Full rated output voltage: +5 VDC ±0.2
 Short-term maximum output current: ≥1000 mA
 The maximum output current for a long time: ≥600 mA
 Voltage Regulation: ±0.2%
 Load Regulation: ±0.5%
 Output ripple and noise (mVp-p): ≤50 mV
o Rated input voltage, full load. Using 20MHz of bandwidth,
o The load side 10uF and 0.1uF capacitor to be tested.
 Switch overshoot amplitude: ≤5 %VO (Rated input voltage and output load plus 10%)
 Output over-current protection: 150-200% of the output maximum load (A)
 Output short circuit protection: Direct short circuit at the normal output, automatically
resume normal operation after a short circuit removal

Safety Characteristics:
 Designed with the input of 0.5A UL certified insurance;
 PCB board using double-sided copper clad plate production, material for the 94-V0
fire rating level;
 Safety standards: Compliance with UL1012, EN60950, UL60950
 Insulation voltage: I / P-O / P: 2500VAC
 Insulation resistance :I / PO / P> 100M Ohms / 500VDC 25 70% RH
 Conduction and radiation :comply with EN55011, EN55022 (CISPR22)
 Electrostatic discharge :IEC / EN 61000-4-2 level 4 8kV / 15kV
 RF radiation Immunity: IEC / EN 61000-4-3
Dimensions:

You might also like