0% found this document useful (0 votes)
101 views4 pages

Winfiol New Command

The document provides a comprehensive list of commands and procedures for managing and monitoring cellular network elements, including checking statuses, alarms, configurations, and interference for various cells. It includes instructions for restarting, resetting, and modifying parameters for different components within a Base Station Controller (BSC). Additionally, it outlines steps for creating external cells and neighbors, as well as troubleshooting issues related to transmission quality.

Uploaded by

Aep Wahyudi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
101 views4 pages

Winfiol New Command

The document provides a comprehensive list of commands and procedures for managing and monitoring cellular network elements, including checking statuses, alarms, configurations, and interference for various cells. It includes instructions for restarting, resetting, and modifying parameters for different components within a Base Station Controller (BSC). Additionally, it outlines steps for creating external cells and neighbors, as well as troubleshooting issues related to transmission quality.

Uploaded by

Aep Wahyudi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 4

WinFiol

LIHAT STATUS AKTIF/NO


rlstp:cell=<cell>;

utk liat semua cell di BSC tsb


rllap:lai=all;

LIHAT SITE NAME BASED OF TG


RXMOP:MO=RXOTG-15; LIAT BSSWANTED DAN Jenis Frek Base Band ato Synthesize

LIHAT INTERFERENCE/CELL RESOURCES


RLCRP:CELL=<CELL>;

LIHAT IP BSC
eac_esi_config -ne bsc

RESTART
RXBLI:MO=RXOTG-<#TG>,SUBORD,FORCE; --> Block
RXESE:MO=RXOTG-<#TG>,SUBORD; --------> Op to Noop
RXESI:MO=RXOTG-<#TG>,SUBORD; --------> Noop to Op
RXBLE:MO=RXOTG-<#TG>,SUBORD; --------> Buka block

RESET TRX
RXBLI:MO=RXOTRX-<TG>-<TX>,SUBORD,FORCE;---> Block
RXESE:MO=RXOTRX-<TG>-<TX>,SUBORD; --------> Op to Noop
RXESI:MO=RXOTRX-<TG>-<TX>,SUBORD; --------> Noop to Op
RXBLE:MO=RXOTRX-<TG>-<TX>,SUBORD; --------> Buka block

Ubah LVA (Limit Value Alarm)


Rlsle:cell=pk4542c;
Rlslc:cell=pk4542c,chtype=sdcch,lva=17,acl=a2;
Rlslc:cell=pk4542c,chtype=tch,chrate=fr,spv=1,lva=28,acl=a3;
Rlslc:cell=pk4542c,chtype=tch,chrate=fr,spv=3,lva=28,acl=a3;
Rlsli:cell=pk4542c;

LOOP TEST FAILED


RXBLI:MO=RXOTS-TG-TX-TS;
RXTEI:MO=RXOTS-TG-TX-TS;
RXLTI:MO=RXOTS-TG-TX-TS;
RXBLE:MO=RXOTS-TG-TX-TS;

LIHAT CONFIG
RXCDP:MO=RXOTG-xxx ;

LIHAT NEIGHBOUR PER SECTOR


RLNCP:CELL=<CELL>; {Neigbors to}
RLNRP:CELL=PE0707C,CELLR=ALL,NODATA;

ACTIVATED SITE FROM HALTED


RLSTC:CELL=<CELL>,STATE=ACTIVE;

LIHAT ALARM TRX


RXMFP:MO=RXOTRX-TG-TRX

LIHAT JENIS ALARM RX


RXMFP:MO=RXORX-TG-RX

RESET C
RXBLI:MO=RXOCF-,SUBORD,FORCE;
RXESE:MO=RXOTG-,SUBORD;
RXESI:MO=RXOTG-,SUBORD;
RXBLE:MO=RXOTG-,SUBORD;

LIAT RBLT (TG)


RXMDP:MO=RXOCF-; {Managed Object Device Inform}
RADEP:DEV=RBLT-; {Device Data in BSC}
NTCOP:SNT=ETRBLT-;
DTSTP:DIP=RBLT; (liat abl pa tidak)
LIAT Slip
dtqup:dip=RBLT74; {Digital Path Quality}

===================================================================================
====================
Common ---> c7spp:sp=all;
===================================================================================
====================
rldep:cell=si1578e;------------------------------>cek BSIC/BCCH/CGI
rlstp:cell=si1578e;------------------------------>cek status (halted/active)

rllap:lai=all; ---------------------------------->Cek LAC/ALL Cell DALAM SUATU BSC

RLNCP:CELL=<CELL>;------------------------------->LIHAT NEIGHBOUR PER SECTOR


rlnrp:cell=lg4149e,cellr=all,nodata;------------->LIHAT NEIGHBOUR EXTERNAL
rlmfp:cell=si1578e;------------------------------>cek MF
rlmfc:cell=si1578e,MBCCHNO=690&698&706,mrnic;---->tambah MF
rlmfe:cell=ki4772a,MBCCHNO=52,MRNIC;------------->Delete MBCCHNO dari list MF satu
cell
rlcpp:cell=me0457i;------------------------------>cek BSPWRB&BSPWRT
allip:acl=a1;------------------------------------>LIAT SEMUA STATUS SITE DALAM SATU
BSC
===================================================================================
==============
Daily Upgrade
===================================================================================
============
CEK RBS TYPE---->rxmfp:mo=rxocf-253;
allip:acl=a1;------------------------>>>"Liat Site Matinya Kapan"
rxtcp:moty=rxotg,cell=rp4058a;---------->Cek TG (Trunk Group)
rxasp:mo=rxotg-41;---------------------->cek alarm
rxmfp:mo=rxocf-72;---------------------->jenis alarm
RXASP:MOTY=RXOTG;----------------->LIAT ALARM 1 BSC PER SITE
rxelp:mo=rxocf-xxx;--------------->Liat History Alarm
rxelp:mo=rxotg-xxx;--------------->Liat History Alarm
rxmfp:mo=rxotx-1-3;
RADIO X-CEIVER ADMINISTRATION
MANAGED OBJECT FAULT INFORMATION
MO BTSSWVER
RXOTX-1-3 ERA-G03-R06V01
RU RUREVISION RUSERIALNO
0
RUPOSITION RULOGICALID
STATE BLSTATE INTERCNT CONCNT CONERRCNT LASTFLT LFREASON
OPER 00000 (---> jika nilainya naik maka berarti sering flicker
atau ga beres)
(---> jika 00000 maka normal)
rxcdp:mo=rxotg-45;---------------------->cek konfigurasi
rxmop:mo=rxotx-39-0&&-11; -------------->cek susunan Konfigurasi
rxmop:mo=rxotx-39-0&&-5&-8&&-11;-------->cek susunan Konfigurasi
rxmop:mo=rxotf-39;---------------------->cek TF Mode (Master,Slave,Stand Alone)
RLCHP:CELL=JK1041ld1;--------------------->Cek ;HOPlss/HSN/MAIO
RLCHC:CELL=LG4151F,CHGR=1,MAIO=0&2&4;--->Ubah MAIO
RLchc:cell=pe0663a,chgr=1,hop=on,maio=0; -------->Kalau 2 TRX
RLchc:cell=pe0663b,chgr=1,hop=on,maio=2&8&14;---->kalau mau 4 TRX

RLCFP:CELL=<CELL>;---------------------->LIHAT MA LIST
rxmop:mo=rxotg-72; --------------------->Cek RBS type/SITENAME BASED OF TG+LIAT
CELL BY TX +
HOPPING Baseband or SynthesizerCEK DAN
TIPE TRANSMISI
lcf (*kalo SIGDEL=LONG->link IDR)
//sebelum ubah dari BB ke SY di blocked dulu TG nya setelah
itu di unblocked
RXMOC:MO=RXOTG- ,FHOP=SY/BB; kalau mau syntesize=SY kalau
BaseBand=BB
===================================================================================
=========================================
Parameter Change ----------allip:acl=a1;----cek MATI nya KAPAN???--
===================================================================================
===================
RLLHP:CELL=me0832g;--------------------->CEK LAYERTHR
RLLHC:CELL=ME0832g,LAYERTHR=85;--------->Ubah LAYERTHR
RLSBP:CELL=ME0083g;--------------------->cek CRO
RLSBC:CELL=ME0083g,CRO=14;-------------->Ubah CRO
rlssp:cell=KR4152b;--------------------->Cek nccperm
rlssc:cell=KR4152c,NCCPERM=0&&7;-------->tambah nccperm
rlcrp:cell=lp2084e;--------------------->cek congestion
RLSSP:CELL=me0083e;--------------------->Check ACCMIN!
RLSSC:CELL=ME0086g,ACCMIN=90;----------->Ubah ACCMIN
RLCCC:CELL=DU1003C,CHGR=1,SDCCH=2;------>TAMBAH SDCCH
rlccc:cell=ma2237A,CHGR=0,SDCCH=2,TN=1;
rlccc:cell=ma2237A,CHGR=0,SDCCH=2,TN=1&2;
rldhp:cell=lp2084e;--------------------->cek AMR (maks 100)
CELL DYNAMIC HR ALLOCATION DATA
CELL DHA DTHAMR DTHNAMR
LH3061E ON 0 60=====>>(nilai DTHNAMR bisa dirubah jika ingin
mengatasi high trafic blocking
semakin tinggi nilai DTHNAMR/DTHAMR semakin
banyak kanal untuk bisa mengatasi congestion)
END
cara pengubahan:
<rldhc:cell=lh3061e,DTHNAMR=60; (misal dari 0 -> 60)
===================================================================================
==========
NAIKIN SITE UPGRADE (TAMBAH CONFIG)
*********************++++++++++++###############===================================
rxmop:mo=rxoTRX-36-0&&-10;
rxmop:mo=rxoTX-36-0&&-10;
rxmop:mo=rxoRX-36-0&&-10;

RXAPP:MO=RXOTG-36; -------------cek RBLT??

@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
rlcfP:cell=ps5782e;----CEK MA LIST (DCHNO)
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
rlcfe:cell=ps5782e,chgr=1,dchno=575&&588; ----Erase DCHNO

rlcfe:cell=ps5782e,chgr=1,dchno=575&&588; ----Add DCHNO


************************************************************************
UBAH DCHNO...MA LIST
*************************************************************************
rlcfe:cell=lg4151g,chgr=1,dchno=804&&819; ******Hapus
rlcfe:cell=lg4151g,chgr=2,dchno=804&&819;

rlcfi:cell=lg4151g,chgr=1,dchno=820&&835; *****Tambah
rlcfi:cell=lg4151g,chgr=2,dchno=820&&835;

**********************************************************************
***********************************************************************
CEK Transmisi Slip
===================================================================================
===================
Quality jelek---> ICMBAND > 1
Slip jelek-->makin besar
))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))
RXTCP:MOTY=RXOTG,CELL=me0200a; !Get #TG!
RXAPP:MO=RXOTG-50; !Get RBLT!
RXMDP:MO=RXOCF-50;--------------> get RBLT Dev
RADEP:DEV=RBLT-1628; !Get SNT!
NTCOP:SNT=etrblt-50; !Get DIP Name!
DTQUP:DIP=rblt50; !Check Transmission Slip!
===================================================================================
=========================================
CREATE EXTERNAL CELL
===================================================================================
=========================================
rldeI: CELL=PE0546E,CSystype=gsm1800,EXT;
RLDEc: CELL=PE0546E, CGI=510-10-321-5465, BSIC=25, BCCHNO=691;
rllhc: cell=pe0546E, layer=6, layerthr=85, layerhyst=3;
rlloc: CELL=pe0546E, bspwr=51, bsrxmin=150, bsrxsuff=150, msrxmin=100, msrxsuff=0,
missnm=3, aw=on, scho=off, b
stxpwr=53, eqxtpen=on;
rlcpc: CELL=pe0546E, mstxpwr=30;

CREATE EXT NEIGHBOR


=====================================
RLNRI: CELL=XXX, CELLR=YYY, SINGLE;
qRLMFC: CELL=XXX, MBCCHNO=yyy, MRNIC;

===================================================================================
=========================================
RLCRP:CELL=<CELL>;---------------------->LIHAT INTERFERENCE/LIHAT ICM BAND
(KUALITAS CHANNEL GROUP)

<rlcrp:cell=be5170a;

You might also like