POINT:

************MO=Managed object instance

See Application Information for block
RXCTA for the format and the value
range of this parameter.
**********MOTY=Managed Object Type
See Application Information for
block RXCTA for the format of this
parameter.
======================================================
LIHAT SITE NAME BASED OF TG
RXMOP:MO=RXOTG-TG;

======================================================
MENCARI TG
RXTCP:MOTY=RXOTG,CELL=LS1039E;
rxtcp:MOTY=RXOTG!,CELL=all;

rllap:lai=all;

======================================================
LIHAT CONFIG
RXCDP:MO=RXOTG-TG;
CARA MUDAH MELIHAT CONFIGxc
RXMOP:MO=RXOTX-TG-"MO PERTAMA"&&-"MO TERAKHIR";

======================================================
STATUS ALARM
RXASP:MO=RXOTG-TG;

======================================================
JENIS ALARM
RXMFP:MO=RXOCF-TG;

==================================================
LIHAT ALARM TRX
RXMFP:MO=RXOTRX-TG-TRX;

==================================================
LIHAT JENIS ALARM RX
RXMFP:MO=RXORX-TG-RX;
======================================================
LIHAT JENIS ALARM CF
rxmfp:mo=rxocf-TG;
======================================================
LIHAT RADIO X-CEIVER A-BIS PATH STATUS
RXAPP:MO=RXOTG-TG;

======================================================
LIHAT SERIAL TRU
RXMFP:MO=RXOTRX-TG-"TRU KE...";

======================================================
STATUS SITE
RLSTP:CELL=<CELL ID>;

======================================================
LIHAT TOTAL NUMBER CHANNEL [CONGEST/NOT]
RLCRP:CELL=<CELL ID>;
======================================================
LIHAT CI,BCCH, BSIC
rldep:CELL=SL5072A;

======================================================
LIHAT NEIGHBOUR PER SECTOR
RLNRP:CELL=<CELL ID>,CELLR=ALL,NODATA;

======================================================
LIHAT POWER
RLCPP:CELL=<CELL ID>;

======================================================
LIHAT MF [MEASUREMENT FREQUENCY]
RLMFP:CELL=<CELL ID>;

======================================================
LIHAT MAIO LIST
RLCHP:CELL=<CELL ID>;

======================================================
LIHAT CRO
RLSBP:CELL=<CELL ID>;

======================================================
LIHAT ACCESMIN,NCC PERM
RLSSP:CELL=<CELL ID>;

======================================================
LIHAT CELL LOCATING DATA
RLLOP:CELL=<CELL ID>;

======================================================
CEK LAYER TRESSHOLD
RLLHP:CELL=<CELL ID>

======================================================
RESET TRU
RXBLI:MO=RXOTRX-<#TG>-<#TRU>,SUBORD,FORCE; --> Block
;
RXESE:MO=RXOTRX-<#TG>-<#TRU>,SUBORD; --------> Op to Noop
;
RXESI:MO=RXOTRX-<#TG>-<#TRU>,SUBORD; --------> Noop to Op
;
RXBLE:MO=RXOTRX-<#TG>-<#TRU>,SUBORD; --------> Buka block
;

======================================================
RESET TIMESLOT:LOOP TEST
RXBLI:MO=RXOTS-TG-TX-TS;
;
RXTEI:MO=RXOTS-TG-TX-TS;
RXLTI:MO=RXOTS-TG-TX-TS;
RXBLE:MO=RXOTS-TG-TX-TS;
;
ex:rxbli:mo=rxots-38-4-1;
TG-TXNo-TSNo
======================================================
ALARM LOG CAPTURE
CACLP;
RXTCP:MOTY=RXOTG,CELL=<CELL ID>;---->TG
RXASP:MO=RXOTG-TG;---->ALARM
RXMFP:MO=RXOCF-TG;---->JENIS ALARM,JENIS KABINET [RBS]
RXCDP:MO=RXOTG-TG;
CACLP;

=====================================================
UPGRADE CONFIG WITH LVA
RLCFP:CELL=<CELL ID>;
RLCCC:CELL=<CELL ID>,CHGR=...,SDCCH=..;
JIKA CONFIGNYA BELUM SAMA DENGAN YANG BARU
RLSLP:CELL=<CELL ID>;
RLCHP:CELL=<CELL ID>;

======================================================
CEK JALUR TRANSMISI
DTQUP:DIP=RBLT<TG>
if "unacceptable performance level" something wrong
with the transmision

dtqsr:dip=rblt14,unacc,degr; atau dtqsr:dip=14rbl2,unacc,degr;

dtqsr:dip=rblt14,ses,es,sf; atau dtqsr:dip=14rbl2,ses,es,sf;
dtqsr:dip=rblt14,ses2,es2,sf; atau dtqsr:dip=14rbl2,ses2,es2,sf;

======================================================
CEK BAGIAN ALARM DAN BAGIAN DARI ALARM
ALLIP:ACL=ALL;--------->UNTUK SEMUA JENIS ALARM
untuk ngecek bagian yang diinginin "ALL" diganti
dengan kode alarm yang muncul

======================================================
CEK TRAFIK SITE [CONGEST OR NOT]
RLCRP:CELL=<CELL ID>;

======================================================
CEK SEMUA RBLT DALAM 1 BSC
DTSTP:DIP=ALL;

======================================================
ADD MF
RLMFC:CELL=<CELL ID>,MBCCHNO=<BCCH>,MRNIC;

======================================================
ADD MAIO
RLCHC:CELL=<CELL ID>,CHGR=<NO CHGR>,MAIO=0&1&.......;

======================================================
BUKA HALTED
rlstc:cell=<Cell ID>,state=ACTIVE;

Halted Site
rlstc:cell=<Cell ID>,state=halted;

reset rblt:
dtqsr:dip=rblt139,unacc,degr;
dtqsr:dip=rblt139,ses,es,sf;
dtqsr:dip=rblt139,ses2,es2,sf;

lihat config
rxmop:MO=RXOTX-98-0&&-8;

cek gprs
rlgsp:cell=BL2176a;

create relation:
RLNRI:CELL="source",CELLR="target";
RLMFC:CELL="source",MBCCHNO="bcch target",MRNIC;
ex:
RLNRI:CELL=ti2025c,CELLR=ti2025a;
RLMFC:CELL=ti2025c,MBCCHNO=51,MRNIC;
RLMFC:CELL=ti2025a,MBCCHNO=53,MRNIC;

memastikan BCCH dalam kondisi idle

RLMFC:cell=BL2176A,mbcchno=62,LISTTYPE=Idle;

untuk chek neighbour

rlnrp:CELL=BA0008A,CELLR=ALL,NODATA;

untuk men-delete BCCCH

rlnre:CELL=BA0008A,CELLR=BL2107A;

cek transmisi
dtstp:dip=rblt233;
ntcop:snt=all;
dtstp:dip=233rbl2;

lihat config edge

rlbdp:cell=bg3127a;
ntcop:snt=all;
rxapp:mo=rxotg-TG; (urut 1 e1)

lihat config
rxmop:mo=rxotx-TG-0&&-8;

lihat e1
rxapp:mo=rxotg-TG; (urut 1 e1)

CEK CSYSTYPE--> pakai rldep

CEK RLLOP-->default 50

cek tx cell berapa

rxmop:mo=rxotx-TG-0&&-8;

dtqdp:dip=rblt159;
dtqhi:dip=rblt159;

rlcrp:cell=bl2176a;

lihat SDCCH
rlcfp:cell=bl2176a;

cek LVA
rlslp:cell=bl2176a;

cek di msc mana CI udah di creat

c7spp:sp=all;

ganti bcch

ganti cell misal di TX

RXMOC:MO=RXOTX-TG-TRX,cell=xxxx;
misal di TRX
RXMOC:MO=RXOTRX-TG-TRX,cell=xxxx;
jgn lupa diblok dl TRX-nya
RXBLI-RXESE-RXMOC-RXESI-RXBLE

Ganti Lac di bsc

RLDEC:cell=<cellid>,<lac baru>;

ngecek faulty di RBS

rxmfp:mo=rxocf-87,subord, faulty;

ngehalted EDGE
RLBDc:cell=bg3127a, CHGR=0, NUMREQEGPRSBPC=0;

user: eyudhiak
pass: Durian2012

ngecek log site

ALLIP:ACL=ALL;

rxmsp:mo=rxotg-275,subord;
rxmsp:mo=rxotg-75,subord;

Batam NCC 2,3,5

User vyu61362
Pass Padang123

CARI TAU RBLT/E1 DI ABIS OPTIM

RXMOP:MO=RXOTG-<TG>; --> tuk cari signalling grup number

RRSGP:SCGR=<SCGR>; --> tuk cari scgr number
RRSCP:SCGR=<SCGR>; --> device number
NTCOP:SNT=ALL; --> rblt number

cek history alarm

aploc;
alogfind -t alp -s SS545D+SEPOTONG
alogfind -e 20140125 -g 20140127 -t alp -s ?N_PAY153GDBARUP

dtble
<rlbdp:cell=UJ1049C;
<rxapp:mo=rxotg-139;
ntcop:snt=all;

RLMFE:CELL=UJ1119E,MBCCHNO=ALL;
RLMFC:CELL=UJ1119F,MBCCHNO=831,LISTTYPE=IDLE;
rllop :cell=co6007E;

rllop dan rlcpp (power)

SCRIPT KONCHECK
LVA

===============================================================

rlssp:cell=TH5736A&TH5736B&TH5736C;
rlcfp:cell=TH5736A&TH5736B&TH5736C;
rllop:cell=TH5736A&TH5736B&TH5736C;
rldhp:cell=TH5736A&TH5736B&TH5736C;
rlldp:cell=TH5736A&TH5736B&TH5736C;
rllup:cell=TH5736A&TH5736B&TH5736C;
rlsbp:cell=TH5736A&TH5736B&TH5736C;
rlpcp:cell=TH5736A&TH5736B&TH5736C;
rlcpp:cell=TH5736A&TH5736B&TH5736C;
rlcdp:cell=TH5736A&TH5736B&TH5736C;
RLCHP:cell=TH5736A&TH5736B&TH5736C;
RLCXP:cell=TH5736A&TH5736B&TH5736C;
RLLDP:cell=TH5736A&TH5736B&TH5736C;
RLGRP:cell=TH5736A&TH5736B&TH5736C;
RLBDP:cell=TH5736A&TH5736B&TH5736C;
RLLHP:cell=TH5736A&TH5736B&TH5736C;

RLSTP:CELL=BT2254A&BT2254B&BT2254C; !CELL STATUS!

RLDEP:CELL=BT2254A&BT2254B&BT2254C; !CELL DESCRIPTION DATA!

RLMFP:CELL=BT2254A&BT2254B&BT2254C; !CELL MEASUREMENT FREQUENCIES!

RLNRP:CELL=BT2254A&BT2254B&BT2254C; !relation!

RLCPP:CELL=BT2254A&BT2254B&BT2254C; !CELL CONFIGURATION POWER DATA!

RLCFP:CELL=BT2254A&BT2254B&BT2254C; !CELL CONFIGURATION FREQUENCY DATA!

RLCHP:CELL=BT2254A&BT2254B&BT2254C; !CELL CONFIGURATION FREQUENCY HOPPING DATA!

RLSSP:CELL=BT2254A&BT2254B&BT2254C; !CELL SYSTEM INFORMATION SACCH AND BCCH DATA!

RLSBP:CELL=BT2254A&BT2254B&BT2254C; !CELL SYSTEM INFORMATION BCCH DATA!

RLCXP:CELL=BT2254A&BT2254B&BT2254C; !CELL CONFIGURATION DTX DOWNLINK DATA!

RLPBP:CELL=BT2254A&BT2254B&BT2254C; !HANDOVER POWER BOOST DATA!

RLBDP:CELL=BT2254A&BT2254B&BT2254C; !CELL CONFIGURATION BPC DATA!

RLDGP:CELL=BT2254A&BT2254B&BT2254C; !CELL CHANNEL GROUP DATA!

RLDTP:CELL=BT2254A&BT2254B&BT2254C; !CELL TRAINING SEQUENCE CODE DATA!

RLGAP:CELL=BT2254A&BT2254B&BT2254C; !CELL CHANNEL GROUP ALLOCATION DATA!

RLLOP:CELL=BT2254A&BT2254B&BT2254C; !CELL LOCATING DATA!

RLLDP:CELL=BT2254A&BT2254B&BT2254C; !CELL LOCATING DISCONNECT DATA!

RLLFP:CELL=BT2254A&BT2254B&BT2254C; !CELL LOCATING FILTER DATA!

RLLPP:CELL=BT2254A&BT2254B&BT2254C; !CELL LOCATING PENALTY DATA!

RLLUP:CELL=BT2254A&BT2254B&BT2254C; !CELL LOCATING URGENCY DATA!

RLLHP:CELL=BT2254A&BT2254B&BT2254C; !CELL LOCATING HIERARCHICAL DATA!

RLHPP:CELL=BT2254A&BT2254B&BT2254C; !CONNECTION OF CELL TO CHANNEL ALLOCATION

PROFILE DATA!
RLCRP:CELL=BT2254A&BT2254B&BT2254C; !CELL RESOURCES!

RLDRP:CELL=BT2254A&BT2254B&BT2254C; !CELL CHANNEL DATA RATE!

RLCDP:CELL=BT2254A&BT2254B&BT2254C; !CELL MULTIPLE CHANNEL ALLOCATION DATA!

RLPRP:CELL=BT2254A&BT2254B&BT2254C; !BSC DIFFERENTIAL CHANNEL ALLOCATION,

PRIORITY PROFILE RESOURCE TYPE DATA!
RLIHP:CELL=BT2254A&BT2254B&BT2254C; !CELL LOCATING INTRACELL HANDOVER DATA!

RLIMP:CELL=BT2254A&BT2254B&BT2254C; !CELL IDLE CHANNEL MEASUREMENT DATA!

RLLCP:CELL=BT2254A&BT2254B&BT2254C; !CELL LOAD SHARING DATA!

RLACP:CELL=BT2254A&BT2254B&BT2254C; !CELL ADAPTIVE LOGICAL CHANNEL

CONFIGURATION !
RLLLP:CELL=BT2254A&BT2254B&BT2254C; !SUBCELL LOAD DISTRIBUTION DATA !

RLOLP:CELL=BT2254A&BT2254B&BT2254C;

RLPCP:CELL=BT2254A&BT2254B&BT2254C; !DYNAMIC MS POWER CONTROL CELL DATA!

RLBCP:CELL=BT2254A&BT2254B&BT2254C; !DYNAMIC BTS POWER CONTROL CELL DATA!

RLGRP:CELL=BT2254A&BT2254B&BT2254C; !CELL GENERAL PACKET RADIO SERVICE RESOURCES

DATA!
RLGSP:CELL=BT2254A&BT2254B&BT2254C; !CELL GENERAL PACKET RADIO SERVICE DATA!

RLSMP:CELL=BT2254A&BT2254B&BT2254C; !CELL SYSTEM INFORMATION BCCH MESSAGE

DISTRIBUTION!
RLSLP:CELL=BT2254A&BT2254B&BT2254C; !CELL SUPERVISION OF LOGICAL CHANNEL
AVAILABILITY DATA !
RLAPP:CELL=BT2254A&BT2254B&BT2254C; !AMR POWER CONTROL CELL DATA!

RLDHP:CELL=BT2254A&BT2254B&BT2254C; !CELL DYNAMIC HR ALLOCATION DATA!

RLDMP:CELL=BT2254A&BT2254B&BT2254C; !CELL DYNAMIC FR/HR MODE ADAPTATION DATA!

RLPDP:CELL=BT2254A&BT2254B&BT2254C; !GPRS PACKET CONTROL CHANNEL DATA!

RLSUP:CELL=BT2254A&BT2254B&BT2254C; !CELL SYSTEM INFORMATION UTRAN DATA!

RLUMP:CELL=BT2254A&BT2254B&BT2254C; !CELL UTRAN MEASUREMENT FREQUENCY DATA!

RLDUP:CELL=BT2254A&BT2254B&BT2254C; !CELL DUAL TRANSFER MODE DATA!

rxasP:MO=RXOTG-83;
rxcdP:MO=RXOTG-83;

Mengecek HCS Band

<RLHBP;

rlcxp:cell=TH5736A&TH5736B&TH5736C;
rxmfp:mo=rxotrx-83-0&&-11;
rlnrp:CELL=TH5736A,CELLR=ALL,NODATA;
rldep:cell=TH5736A;
RLMFC:CELL=TH5736B,MBCCHNO=61,MRNIC;
rlmfe:CELL=TH5736B,MBCCHNO=ALL;
RLMFC:CELL=TH5736B,MBCCHNO=61,LISTTYPE=IDLE;
rlmfp:CELL=TH5736B;
rlmfp:CELL=TH5736A;
rlmfp:CELL=TH5736C;
rxtcP:MO=RXOTG-83;
dtqup:dip=rblt83;
dtqup:dip=rblt84;
eaw BTBH2

RLchc:cell=pe0663b,chgr=1,hop=on,maio=2&8&14;

==========

IPM rrsgp:scgr=4;

rabre:rid=BARID00,mrnic;
rabre:rid=BARID01,mrnic;
rabrp:rid=all;

rrptp:PSTU=UJT694G_1; status siu

===========
IDR

rxmop:mo=rxotg-219;
rxmoc:mo=rxotg-248,PTA=50;
<rxmop:mo=rxotg-151;
RADIO X-CEIVER ADMINISTRATION
MANAGED OBJECT DATA

MO RSITE COMB FHOP MODEL

RXOTG-151 MS4193+TGADANG HYB SY G12

SWVERREPL SWVERDLD SWVERACT TMODE

B1307R066H B1307R066H SCM

CONFMD CONFACT TRACO ABISALLOC CLUSTERID SCGR

FASTREC 1 POOL FIXED 151
 DAMRCR CLTGINST CCCHCMD
NORMAL

PTA JBSDL PAL JBPTA

50 20 0 20

TGFID SIGDEL BSSWANTED PACKALG

H'0000-0073 LONG 1010 1

==============================================

BCCH TELKOMSEL

GSM : 51-65
DCS :
sector E (828-835)
sector F (703-710)
sector G (598-610)
indoor (824-827) bisa digunakan untuk macro outer

========================================================

<rxmop:mo=rxotf-131&-494;
RADIO X-CEIVER ADMINISTRATION
MANAGED OBJECT DATA

MO TFMODE SYNCSRC TFCOMPNEG TFCOMPPOS FSOFFSET TFAUTO

RXOTF-131 SA DEFAULT NO

MO TFMODE SYNCSRC TFCOMPNEG TFCOMPPOS FSOFFSET TFAUTO

RXOTF-494 SA DEFAULT NO
END

===============================

Counter unutk mengwcek TBF yang jelek

PREJTFI PREJOTH
di BIG

==================
meisahkan site ID
=LEFT(E11,FIND("W",E11,5))

=====================

meningkatkan SDCCH
rlsbc:cell=uj1203F,MAXRET=1;
rlccc:cell=UJ1203F,CHGR=0,TN=1&&7;

=================

nurunin DCR, karena masalah coverage

rlbcc:cell=TH5714G,SSDESDL=90;
rlpcc:cell=TH5714G,SSDESUL=90;
rlloc:cell=TH5714G,BSRXMIN=92,MSRXMIN=87;
rlssp:cell=TH5714G,ACCMIN=96;
rlssc:cell=TH5714G,ACCMIN=96;

==========================
memperbaiki TX insufficient
!12-2-2015, 14:18
rlbdc:cell=PP3546E,CHGR=2,NUMREQBPC=32; !NUMREQBPC=SYSDEF!
rlbdc:cell=PP3546F,CHGR=2,NUMREQBPC=16; !NUMREQBPC=SYSDEF!
rlbdc:cell=PP3546G,CHGR=2,NUMREQBPC=16; !NUMREQBPC=SYSDEF!

=====================================
rxmsc:mo=rxotg-144,rsite=E_SSI548DXPWKTA;

================================

menambahkan device edge

rlbdc:cell=UJ1203F,CHGR=0,NUMREQEGPRSBPC=0;
rlbdc:cell=UJ1203F,CHGR=1,NUMREQEGPRSBPC=6;
rlbdp:cell=UJ1203F;
rxtcp:MOTY=RXOTG,CELL=UJ1203F;
rxape:mo=rxotg-94,dcp=20&21;
rxapi:mo=rxotg-94,dcp=20&21,dev=RBLT2-3028&-3029,res64k;
rlbdc:cell=UJ1203G,CHGR=0,NUMREQEGPRSBPC=0;
rlbdc:cell=UJ1203G,CHGR=1,NUMREQEGPRSBPC=6;
rxapp:mo=rxotg-94;
rxcdp:mo=rxotg-94&-168;
rxasp:mo=rxotg-94&-168;
rlbdp:cell=UJ1203G;
rxtcp:MOTY=RXOTG,CELL=UJ1203G;
rlbdp:cell=UJ1203FUJ1203G
rlbdp:cell=UJ1203FUJ1203G;

=======================

SD avail lebih dari 100 persen

<rlccc:cell=TH5252E,CHGR=0,SDCCH=3,TN=1&3&5;
RLCCC:CELL=TH5252E,CHGR=0,SDCCH=3,TN=1&3&5;
<;
EXECUTED

<rlccp:cell=TH5252E;
CELL CONFIGURATION CONTROL CHANNEL DATA

CELL
TH5252E

CHGR SDCCH SDCCHAC TN CBCH CCCH

0 3 0 1 YES 2
3
5
1 0 1 1 NO

========================

scm
rrgsp:scgr=all;
rrgrp:scgr=all;
rrsgp:scgr=all;
rrpgp:rp=all;

==========

CACLP;
ALLIP;
DTQUP:DIP=ALL;
DTSTP:DIP=ALL;
NTCOP:SNT=ALL;
RASAP;
RRMSP:TRAPOOL=ALL;
RRTPP:TRAPOOL=ALL;
RXTCP:MOTY=RXOTG;
RXMOP:MOTY=RXOTG;
RXMOP:MOTY=RXOCF;
RXMOP:MOTY=RXOCON;
RXMOP:MOTY=RXOTF;
RXMOP:MOTY=RXOTRX;
RXMOP:MOTY=RXOTX;
RXMOP:MOTY=RXORX;
RXMSP:MOTY=RXOTG;
RXMSP:MOTY=RXOCF;
RXMSP:MOTY=RXOCON;
RXMSP:MOTY=RXOTF;
RXMSP:MOTY=RXOTRX;
RXMSP:MOTY=RXOTX;
RXMSP:MOTY=RXORX;
RXMDP:MOTY=RXOTRX;
RXMFP:MOTY=RXOCF;
RXMFP:MOTY=RXOCON,FAULTY;
RXMFP:MOTY=RXOTF,FAULTY;
RXMFP:MOTY=RXOTRX;
RXMFP:MOTY=RXOTX,FAULTY;
RXMFP:MOTY=RXORX,FAULTY;
RXMFP:MOTY=RXOTS,FAULTY;
RXASP:MOTY=RXOTG;
RXELP:MOTY=RXOCF;
RXELP:MOTY=RXOCON;
RXELP:MOTY=RXOTF;
RXELP:MOTY=RXOTRX;
RXELP:MOTY=RXOTX;
RXELP:MOTY=RXORX;
RXELP:MOTY=RXOTS;
NTSTP:SNT=ALL;

============

The ERICSSON commands listed below are for these functions

RLCRP:CELL=ALL;-----------for viewing all the cells of BSC
sites( BSC )DTSTP:DIP=ALL;-------------for viewing state of digital path and links
( MSC & BSC )MGSVP:------------------------for checking subscribe base ( MSC )
STRSP:R=ALL; -----------------for checking all route ( MSC &
BSC )dtbli:dip=rblt**;-------------blocking ofdip
dtble:dip=rblt**;---------------deblocking of dip
rxmsp:mo=rxotg-**,subord;-------management object status
rxmfp:mo=rxotg-**,subord; ----------fault print comand for management objec

aploc;
mml rxmop:moty rxotg | grep frindstring meowe

===============

RLSTP:CELL=BJ1161E&BJ1161F&BJ1161G;
RLDEP:CELL=BJ1161E&BJ1161F&BJ1161G;
RLMFP:CELL=BJ1161E&BJ1161F&BJ1161G;
RLNRP:CELL=BJ1161E&BJ1161F&BJ1161G;
RLCPP:CELL=BJ1161E&BJ1161F&BJ1161G;
RLCFP:CELL=BJ1161E&BJ1161F&BJ1161G;
RLCHP:CELL=BJ1161E&BJ1161F&BJ1161G;
RLSSP:CELL=BJ1161E&BJ1161F&BJ1161G;
RLSBP:CELL=BJ1161E&BJ1161F&BJ1161G;
RLCXP:CELL=BJ1161E&BJ1161F&BJ1161G;
RLPBP:CELL=BJ1161E&BJ1161F&BJ1161G;
RLBDP:CELL=BJ1161E&BJ1161F&BJ1161G;
RLDGP:CELL=BJ1161E&BJ1161F&BJ1161G;
RLDTP:CELL=BJ1161E&BJ1161F&BJ1161G;
RLGAP:CELL=BJ1161E&BJ1161F&BJ1161G;
RLLOP:CELL=BJ1161E&BJ1161F&BJ1161G;
RLLDP:CELL=BJ1161E&BJ1161F&BJ1161G;
RLLFP:CELL=BJ1161E&BJ1161F&BJ1161G;
RLLPP:CELL=BJ1161E&BJ1161F&BJ1161G;
RLLUP:CELL=BJ1161E&BJ1161F&BJ1161G;
RLLHP:CELL=BJ1161E&BJ1161F&BJ1161G;
RLHPP:CELL=BJ1161E&BJ1161F&BJ1161G;
RLCRP:CELL=BJ1161E&BJ1161F&BJ1161G;
RLDRP:CELL=BJ1161E&BJ1161F&BJ1161G;
RLCDP:CELL=BJ1161E&BJ1161F&BJ1161G;
RLPRP:CELL=BJ1161E&BJ1161F&BJ1161G;
RLIHP:CELL=BJ1161E&BJ1161F&BJ1161G;
RLIMP:CELL=BJ1161E&BJ1161F&BJ1161G;
RLLCP:CELL=BJ1161E&BJ1161F&BJ1161G;
RLACP:CELL=BJ1161E&BJ1161F&BJ1161G;
RLLLP:CELL=BJ1161E&BJ1161F&BJ1161G;
RLOLP:CELL=BJ1161E&BJ1161F&BJ1161G;
RLPCP:CELL=BJ1161E&BJ1161F&BJ1161G;
RLBCP:CELL=BJ1161E&BJ1161F&BJ1161G;
RLGRP:CELL=BJ1161E&BJ1161F&BJ1161G;
RLGSP:CELL=BJ1161E&BJ1161F&BJ1161G;
RLSMP:CELL=BJ1161E&BJ1161F&BJ1161G;
RLSLP:CELL=BJ1161E&BJ1161F&BJ1161G;
RLAPP:CELL=BJ1161E&BJ1161F&BJ1161G;
RLDHP:CELL=BJ1161E&BJ1161F&BJ1161G;
RLDMP:CELL=BJ1161E&BJ1161F&BJ1161G;
RLPDP:CELL=BJ1161E&BJ1161F&BJ1161G;
RLSUP:CELL=BJ1161E&BJ1161F&BJ1161G;
RLUMP:CELL=BJ1161E&BJ1161F&BJ1161G;
RLDUP:CELL=BJ1161E&BJ1161F&BJ1161G;

=============
 !mengganti TF Mode

RXMSC:MO=RXOTF-105,TFMODE=S,TFCOMPNEG=4600;
RXMSC:MO=RXOTF-105,TFMODE=M;

===========

RXBLI:MO=RXOTF-94,FORCE;
RXESE:MO=RXOTF-94;
RXESI:MO=RXOTF-94;
RXBLE:MO=RXOTF-94;

RXMOC:MO=RXOTF-94,TFMODE=M;
RXMOC:MO=RXOTF-117,TFMODE=S,TFCOMPNEG=4600,SYNCSRC=DEFAULT,FSOFFSET=OFF;

===================
status transport IPM