Scribd
Upload
63 views1 page

Cdp-Tx-02N / Cdp-Rx-02N 433Mhz: Uhf Narrow Band Multi Channel Transmitter/Receiver

The document describes a UHF narrow band multi-channel transmitter/receiver module operating in the 433MHz band. The CDP-TX-02N transmitter and CDP-RX-02N receiver modules feature 32 frequency channels that can be selected using a 4-bit switch, with a channel spacing of 25kHz between 433.875MHz and 434.650MHz. The modules have a range of up to 300m, low power consumption, and are suitable for applications such as remote control systems, security systems, and alarms.

Uploaded by

ВладимирРакоњац
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
63 views1 page

Cdp-Tx-02N / Cdp-Rx-02N 433Mhz: Uhf Narrow Band Multi Channel Transmitter/Receiver

The document describes a UHF narrow band multi-channel transmitter/receiver module operating in the 433MHz band. The CDP-TX-02N transmitter and CDP-RX-02N receiver modules feature 32 frequency channels that can be selected using a 4-bit switch, with a channel spacing of 25kHz between 433.875MHz and 434.650MHz. The modules have a range of up to 300m, low power consumption, and are suitable for applications such as remote control systems, security systems, and alarms.

Uploaded by

ВладимирРакоњац
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

UHF Narrow Band Multi Channel Transmitter/Receiver

CDP-TX-02N / CDP-RX-02N 433MHz


The unique and compact CDP-02N is a frequency selectable radio data module for 434MHz UHF band. Both
CDP-TX-02N (transmitter) and CDP-RX-02N (receiver) are equipped by frequency synthesizer system with
microprocessor. Frequency range of CDP-02N is from 433.875MHz to 434.650MHz in 32 channels which are
selectable by the use of an onboard 4 bits switch.
Small size, low voltage operation and frequency selectability of CDP-02N make it ideal for various applications in
sites where many radio transmitters are operated.
Feature
32 frequency synthesized RF channels
5mW/10mW selectable
Low voltage operation
High sensitivity 300m range
FM narrow band modulation and
high frequency stability
EN 300 220, EN301 489 compliance

Application
Remote control systems
Security systems
Alarms
Telemetry systems

Common Item
Communication form
Specification
One way
Oscillation system PLL controlled VCO
Frequency range 433.875MHz to 434.650MHz
Number of RF channels 32 ch
Channel step 25kHz
Frequency stability +/-2.5kHz (-10 to +55 degree C)
Baud rate 300 to 4800bps
Operating temp. range -10 - +60 degree C

CDP-TX-02N Transmitter type PLL synthesizer


RF output power 10mW/5mW
(Transmitter) Transmitter start up time 80msec
Modulation FM Narrow
Data input level 2.2 - 12V
Input signal Digital
Deviation 2.0kHz
Spurious emission <-60dBm (< 862MHz) , <-46dBm (>= 862MHz)
Adjacent channel power <200nW
Supply voltage 2.4 - 12V DC
Supply current 30mA (typ)
Dimensions 36 X 26 X 10 mm
Weight 12.5g

CDP-RX-02N Receiver type Double Superheterodyne PLL synthesizer


Sensitivity -120dBm (12dB/SINAD at CCITT filter)
(Receiver) Selectivity +/-7.5kHz at -6dB point
Demodulation FM Narrow
Distortion <3% at 1kHz
S/N ratio 35dB overall (AF out)
Data output Digital
Supply Voltage 3.6 to 12V DC
Supply current 26mA (typ)
Dimensions 50 X 30 X 9mm
Weight 19g
Specifications are subject to change without prior notice

CIRCUIT DESIGN, INC. International Business Division


http://www.circuitdesign.co.jp/ 7557-1 Hotaka,Hotaka-machi,Minamiazumi,Nagano 399-8303,Japan
CDP-TX/RX-02NDS ver1.0 Tel:+81-263-82-1024 Fax:+81+263-82-1016

You might also like