Round Through-Hole LED Lamp
(5 mm)
OVLFx3C7 Series
• High brightness with well-defined spatial radiation patterns
• UV-resistant epoxy lens Product Photo Here
• Blue, green, red, yellow
Each device in the OVLFx3C7 series is a high-intensity LED mounted in a clear plastic T-1¾ package. The LED
provides a well-defined and even emission pattern. Its UV-resistant epoxy lens makes this device an optimal
solution for outdoor applications.
Applications
• Traffic and pedestrian signals
• Signage and architectural lighting
• Backlighting
• Automotive
Part Number Material Emitted Color Intensity Typ. mcd Lens Color
OVLFB3C7 InGaN Blue 1350 Water Clear
OVLFG3C7 InGaN Green 5200 Water Clear
OVLFR3C7 AllnGaP Red 5000 Water Clear
OVLFY3C7 AllnGaP Yellow 5700 Water Clear
[MILLIMETERS]
DIMENSIONS ARE IN:
INCHES
RoHS Moisture DO NOT LOOK DIRECTLY
AT LED WITH UNSHIELDED
EYES OR DAMAGE TO
RETINA MAY OCCUR.
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Issue A.2 08/06
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Page 1 of 9
Round Through-Hole LED Lamp
OVLFx3C7 Series
Absolute Maximum Ratings
TA = 25o C unless otherwise noted
Storage Temperature Range -40 ~ +100 °C
Operating Temperature Range -40 ~ +85 °C
Reverse Voltage 5V
Blue, Green 20 mA
Continuous Forward Current
Red, Yellow 30 mA
Blue, Green 50 mA
Peak Forward Current (10% Duty Cycle, 1 kHz)
Red, Yellow 100 mA
Blue, Green 100 mW
Power Dissipation
Red, Yellow 78 mW
Blue, Green -0.2 mA/° C
Current Linearity vs Ambient Temperature
Red, Yellow -0.5 mA/° C
LED Junction Temperature 125° C
Lead Soldering Temperature (3 mm from the base of the epoxy bulb)1 260° C
Note:
1. Solder time less than 5 seconds at temperature extreme.
Electrical Characteristics
TA = 25o C unless otherwise noted
SYMBOL PARAMETER COLOR MIN TYP MAX UNITS CONDITIONS
Blue 810 1350 ----
Green 3115 5200 ----
IV Luminous Intensity mcd IF = 20 mA
Red 2820 5000 ----
Yellow 3115 5700 ----
Blue ---- 3.4 4.0
Green 2.6 3.4 4.0
VF Forward Voltage V IF = 20 mA
Red ---- 2.2 2.6
Yellow ---- 2.2 2.6
Blue ---- ---- 50
Green ---- ---- 50
IR Reverse Current µA VR = 5 V
Red ---- ---- 10
Yellow ---- ---- 10
Blue ---- 466 ----
Green ---- 521 ----
λP Peak Wavelength nm IF = 20 mA
Red ---- 633 ----
Yellow ---- 593 ----
Blue ---- 470 ----
Green ---- 525 ----
λD Dominant Wavelength nm IF = 20 mA
Red 619 623 630
Yellow ---- 589 ----
Blue ---- 25 ----
Green ---- 25 ----
Δλ Spectra Half Width nm IF = 20 mA
Red ---- 25 ----
Yellow ---- 25 ----
2Θ½H-H 50% Power Angle ---- 30 ---- deg IF = 20 mA
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A.2 08/06 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Page 2 of 9 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com
Round Through-Hole LED Lamp
OVLFx3C7 Series
Standard Bins (IF = 20 mA)
Lamps are sorted to luminous intensity (IV) and dominant wavelength (λD) bins shown.
Orders may be filled with any or all bins contained as below.
OVLFB3C7 (BLUE)
Luminous Intensity (mcd)
1590–2225 T
1135–1590 S
810–1135 R Luminous intensity is
at R bin or above.
Dominant Wavelength (470 nm)
OVLFG3C7 (GREEN)
Luminous Intensity (mcd)
6105–8550 X
4360–6105 W
3115–4360 V
Luminous intensity is
at V bin or above.
Dominant Wavelength (525 nm)
OVLFR3C7 (RED)
Luminous Intensity (mcd)
5520–7735 W
3950–5520 V
2820–3950 U
Luminous intensity is
at U bin or above.
Dominant Wavelength (623 nm)
Notes:
1. All ranks will be included per delivery, rank ratio will be based on the chip distribution.
2. To designate luminous intensity ranks, please contact OPTEK.
3. Pb content <1000 PPM.
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Issue A.2 08/06
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Page 3 of 9
Round Through-Hole LED Lamp
OVLFx3C7 Series
OVLFY
Y3C7 (YELLOW)
Luminous Intensity (mcd)
Y3 Y4 Y5
6105–8550 X
4360–6105 W
3115–4360 V
Luminous intensity is
585 589 592 595 at V bin or above.
Dominant Wavelength (nm)
Important Notes:
1. All ranks will be included per delivery, rank ratio will be based on the chip distribution.
2. To designate luminous intensity ranks, please contact OPTEK.
3. Pb content <1000 PPM.
Beam Pattern
Beam Pattern
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A.2 08/06 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Page 4 of 9 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com
Round Through-Hole LED Lamp
OVLFx3C7 Series
Typical Electro-Optical Characteristics Curves (BLUE)
mA %
V mA
Forward Current vs Forward Voltage Relative Luminous Intensity vs Forward Current
μA mA
°C
Reverse Current vs Reverse Voltage Forward Current vs Ambient Temperature
°C
Relative Luminous Intensity vs Ambient Temperature
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Issue A.2 08/06
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Page 5 of 9
Round Through-Hole LED Lamp
OVLFx3C7 Series
Typical Electro-Optical Characteristics Curves (GREEN)
mA %
V mA
Forward Current vs Forward Voltage Relative Luminous Intensity vs Forward Current
μA mA
°C
Reverse Current vs Reverse Voltage Forward Current vs Ambient Temperature
°C
Relative Luminous Intensity vs Ambient Temperature
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A.2 08/06 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Page 6 of 9 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com
Round Through-Hole LED Lamp
OVLFx3C7 Series
Typical Electro-Optical Characteristics Curves (RED)
mA %
V mA
Forward Current vs Forward Voltage Relative Luminous Intensity vs Forward Current
μA mA
°C
Reverse Current vs Reverse Voltage Forward Current vs Ambient Temperature
°C
Relative Luminous Intensity vs Ambient Temperature
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Issue A.2 08/06
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Page 7 of 9
Round Through-Hole LED Lamp
OVLFx3C7 Series
Typical Electro-Optical Characteristics Curves (YELLOW)
mA %
V mA
Forward Current vs Forward Voltage Relative Luminous Intensity vs Forward Current
mA
μA
°C
Reverse Current vs Reverse Voltage Forward Current vs Ambient Temperature
%
%
nm °C
Relative Luminous Intensity vs Wavelength Relative Luminous Intensity vs Ambient Temperature
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A.2 08/06 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Page 8 of 9 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com
Round Through-Hole LED Lamp
OVLFx3C7 Series
Packing Information: Available in bulk or reel
Bulk: 500 pcs/bag
13-inch reel: 1000 pcs/reel
Carrier Tape Dimensions: Loaded quantity 1000 pieces per reel
Moisture Resistant Packaging
Label Aluminum Moisture-proof Bag Desiccant Bar Code Label
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Issue A.2 08/06
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Page 9 of 9
