TECHNICAL DATA SHEET
Edition: July 2013
CHEMXSEAL 32- 17 Page 1 of 2
Type Acrylic Sealant – Anti fungal duct sealants
Description CHEMXSEAL 32-17 is fire retardant, aqua based, vapor barrier sealant for low, medium, and
high pressure or high velocity- metal, fiberglass and flexible heating and air conditioning air
ducts. It is highly elastic in nature. It has excellent adhesion to metal, aluminum, etc. This
exhibits excellent strength, flexibility and resistance to heat and cold. It performs as tough
and flexible adhesive and sealant, forming a durable seal against air leakage.
CHEMXSEAL 32-17 does not contain Asbestos, Lead, Mercury or Mercury Compounds.
Recommended Use CHEMXSEAL 32-17 is highly recommended in application where fibrous glass and other type
of insulations are bonded to the interior or exterior of metal duct system
CHEMXSEAL 32-17 is ideal for sealing ASJ, FRK and FSK jackets and board facings at joints,
laps and over staple and weld pin puncture and for sealing flexible air duct to rigid connectors
Features Highly antifungal
Resistant to mold, mildew, water, extreme temperature changes and aging
Resistant to oil, grease and mildly resistant to diluted alkalis and acids
Form Supplied Cartridge
Specification
Property Value Unit of Measurement Method
Specific Gravity 1.6 ±0.10 Kg/Lt. ASTM D 1475-98
Skin Forming Time 9 Minutes XSTM 09
Viscosity Flow Non Sag Paste
Hardness 11 Shore A ASTM D 2240
Tensile Strength 5-8 Kg/cm2 XSTM 11
Service Temperature -50 to 150 °C XSTM 07
Tack Free Time 4-8 Minutes XSTM 17
XCHEM INTERNATIONAL LLC
Tel.: +971 7 243 2538, Fax: +971 7 243 2539
P.O.Box: 31292, Industrial Plot # WIZ – 08 (23, 25),
RAK Investment Authority, R.A.K., United Arab Emirates.
Email: info@xchem.ae, Web: www.xchem.ae
TECHNICAL DATA SHEET
Edition: July 2013
CHEMXSEAL 32- 17 Page 2 of 2
Other Data
Appearance Clear/White/Black/Grey
Cure System Acetoxy
Hardening Speed, in 24Hrs >2 Mm
Full cure 1-5 Days Depending on bead thickness, humidity and temperature
Adhesion on:
Concrete Excellent
Ceramic Excellent
Mild Steel Good
Surface Preparation The surface should be structurally sound, clean, dry, leveled and free from dust curing
compounds grease and other loose debris.
Application Procedure CHEMXSEAL 32-17 is applied to clean, dry, oil-free and sounded surface, by power
Extrusion or trowel uniformly.
Packaging 455 gm / 500 gm / Carlton (24 Cartridges)
Shelf Life 12 months from date of manufacturing in an original unopened container
Storage Store product (10oC - 40oC) for maximum storage life. Higher temperatures reduce
normal storage life. Lower temperatures may cause increased viscosity of a temporary
nature. Rotate stock on a “first in-first out” basis.
Cleaning Tools: Clean immediately after use with water or white spirit if the material has dried.
Surface: Immediately remove any adhesive from the surface of the floor covering
with a damp cloth.
Health & Safety Please refer to the MSDS.
This Information and our technical advice - whether verbal, in writing or by way of trials - are given in good faith but without warranty, and this also applies
where proprietary rights of third parties are involved. Our advice does not release you from the obligation to verify the information currently provided -
especially that contained in our safety data and technical information sheets - and to test our products as to their suitability for the intended processes and
uses. The application, use and processing of our products and the products manufactured by you on the basis of our technical advice are beyond our control
and, therefore, entirely your own responsibility.
XCHEM INTERNATIONAL LLC
Tel.: +971 7 243 2538, Fax: +971 7 243 2539
P.O.Box: 31292, Industrial Plot # WIZ – 08 (23, 25),
RAK Investment Authority, R.A.K., United Arab Emirates.
Email: info@xchem.ae, Web: www.xchem.ae
