®

Mining Cable
FOR INDUSTRIAL, COMMERCIAL AND SPECIALT Y APPLICATIONS

OCTOBER 2014
 ® Related Literature
MINING CABLE ENGINEERING GUIDE
MINING
Mining Cable Engineering Handbook
Mining Cable for Industrial, 2nd Edition
Commercial and Specialty Welcome to the second edition of General
Applications Cable’s Mining Cable Engineering Handbook.
This manual provides engineering information
This new catalog contains for today’s mine power cables. If you need any
in-depth information on the most further information on any of your wire and
cable needs, General Cable’s customer service
comprehensive line of mining
and technical staff are available to provide the
cable available today. It features answers you need quickly and efficiently.
the latest information on products,
along with detailed technical
SURFACE MINING GUIDE
and specification data in indexed
sections – with an easy-to-use How to Cut Downtime and Extend Cable Life
Surface mining cable care and maintenance
“spec-on-a-page” format.
Anaconda® Brand mining cables have been
The spec-on-a-page format was designed to reduce cable-related downtime, as
this factor represents a serious impact to mine
developed to meet your needs. It profitability. This booklet represents a timely,
features up-to-the-minute product updated body of knowledge for surface mining.
information, from applications and It reduces our recommendations to simple
constructions to detailed technical procedures that can readily be passed on to all
of your operating personnel.
and specification data. There’s also
a technical information section for
additional assistance. UNDERGROUND MINING GUIDE
And, of course, if you need any How to Cut Downtime and Extend Cable Life
Underground mining cable care and maintenance
further data, General Cable’s Anaconda® Brand mining cables have been
Customer Service staff provides designed to reduce cable-related downtime, as
the answers you need quickly and this factor represents a serious impact to mine
profitability. This booklet represents a timely,
efficiently.
updated body of knowledge for underground
mining. It reduces our recommendations to simple
procedures that can readily be passed on to all of
your operating personnel.
All information in this catalog is presented solely as
a guide to product selection and is believed to be
reliable. All printing errors are subject to correction
in subsequent releases of this catalog. Although
SPLICING AND TERMINATING GUIDE
General Cable has taken precautions to ensure the
accuracy of the product specifications at the time
of publication, the specifications of all products
Splicing And Terminating of Portable Cables
contained herein are subject to change without notice. Splices and terminations, which are always a vital
GENERAL CABLE, ANACONDA BRAND, ANAMAXX, part of any cable system, become more susceptible
CAROL BRAND, CAROLPRENE, ONE COMPANY
CONNECTING THE WORLD, SUPER VU-TRON
to failure at higher voltages. Whether the splice or
and UNIBLEND are trademarks of General Cable termination is accomplished by the use of hand-
Technologies Corporation.
applied tapes, a filled or molded device, heat-
© 2014. General Cable Technologies Corporation. shrinkable tubing, or a prefabricated device, care
Highland Heights, KY 41076
All rights reserved. should be exercised during the application. This
Printed in U.S.A.
brochure offers general procedures and techniques
for splicing and terminating of portable cables.
 PRODUCT SELECTION LOCATOR
SECTION PAGES
®

1 Anaconda Brand
Mining-Grade Cables
1-30

2 Carol Brand
®

31-38
Industrial-Grade Cables

3 Carol Brand
Rubber Cord Products
39-46

4 Technical Information 47-56

 Table of Contents
SECTION PAGES

1 Anaconda® Brand Mining-Grade Cables 1-30

• Anaconda® Brand Type W Power, Flat Parallel Portable w/o Ground, EPR/CPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
• Anaconda® Brand Type W Power, Flat Parallel Portable, EPR/CPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
• Anaconda® Brand Type W Power, Round Portable, EPR/CPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
• Anaconda® Brand Type G Power, Flat Parallel Portable w/Ground, EPR/CPE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
• Anaconda® Brand Type G-GC Power, Flat Parallel Portable w/Ground-Check, EPR/CPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
• Anaconda® Brand Type G-GC Power, Round Portable w/Ground-Check, EPR/CPE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
• Anaconda® Brand Type G-CGC Power, Round Portable w/Extensible Ground-Check, EPR/CPE . . . . . . . . . . . . . . . . . . . . . . . . .8
• Anaconda® Brand Type SHD Power, Flat Portable w/Ground, EPR/CPE - 2000 Volts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
• Anaconda® Brand Type SHD-GC Power, Shielded Round Portable w/Ground-Check, EPR/CPE - 2000 Volts . . . . . . . . . . . . . .10
• Anaconda® Brand Type SHD-GC Power, Shielded Round Portable w/Ground-Check, EPR/CPE - 2000 Volts . . . . . . . . . . . . . .11
• Anaconda® Brand Type SHD-CGC Power, Shielded Round Portable w/Extensible Ground-Check, EPR/CPE - 2000 Volts. . . .12
• Anaconda® Brand Type SHD-BGC Power, Shielded Round Portable w/Extensible Ground-Check, EPR/CPE - 2000 Volts. . . .13
• Anaconda® Brand Type SHD-GC Power, Shielded Round Portable w/Ground-Check, EPR/CPE - 5000 Volts . . . . . . . . . . . . .14
• Anaconda® Brand Type SHD-GC Power, Shielded Round Portable w/Ground-Check, EPR/CPE - 5000 Volts . . . . . . . . . . . . .15
• Anaconda® Brand Type SHD-CGC Power, Shielded Round Portable w/Extensible Ground-Check, EPR/CPE - 5000 Volts. . .16
• Anaconda® Brand Type SHD-BGC Power, Shielded Round Portable w/Extensible Ground-Check, EPR/CPE - 5000 Volts . .17
• Anaconda® Brand Type SHD-GC Power, Shielded Round Portable w/Ground-Check, EPR/CPE - 8000 Volts . . . . . . . . . . . . . .18
• Anaconda® Brand Type SHD-GC Power, Shielded Round Portable w/Ground-Check, EPR/CPE - 8000 Volts . . . . . . . . . . . . . .19
• Anaconda® Brand Type SHD-GC Power, Shielded Round Portable w/Ground-Check, EPR/CPE - 15000 Volts . . . . . . . . . . . . .20
• Anaconda® Brand Type SHD-GC Power, Shielded Round Portable w/Ground-Check, EPR/CPE - 15000 Volts . . . . . . . . . . . . .21
• Anaconda® Brand Type SHD-GC Power, Shielded Round Portable w/Ground-Check, EPR/CPE - 25000 Volts . . . . . . . . . . . . .22
• Anaconda® Brand Type SHD-GC Power, Shielded Round Portable w/Ground-Check, EPR/CPE - 25000 Volts . . . . . . . . . . . . .23
• Anaconda® Brand Type VFD-BGC Power, Shielded Round Portable w/Extensible Ground-Check, EPR/CPE - 2000 Volts . . .24
• Anaconda® Brand Type MP-GC (Uniblend® EPR), Mine Power Feeder w/Ground-Check, EPR/CPE . . . . . . . . . . . . . . . . . . . 25-28
• Anaconda® Brand Type MP-GC, Mine Power Feeder w/Ground-Check, XLPE/PVC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29-30
 Table of Contents
SECTION PAGES

2 Carol® Brand Industrial-Grade Cables 31-38

• Super Vu-Tron® Single Conductor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

• Super Vu-Tron® Multi-Conductor Type W Round . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
• Super Vu-Tron® Type G and Type G-GC Round . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
• Carolprene® 105°C Welding Cable. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
• Carolprene® Welding Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
• Super Vu-Tron® Welding Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
• Super Vu-Tron® Single Conductor Type W Extra Flex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

3 Carol® Brand Rubber Cord Products 39-46

• Carol® Double Jacket Drill Cord. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
• Super Vu-Tron® Supreme Types SJOOW/SOOW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
• Carolprene® Jacketed Type SOOW. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
• Carolprene® Jacketed Type SJOOW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
• Carolprene® Jacketed Type SOOW, Non-UL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
• Super Vu-Tron® Multi-Conductor Type SOOW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45-46

4 Technical Information 47-56

• Installation and Engineering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48-49

• AWG-to-Metric Conversion Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
• Why and How Mining Cables Fail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50-51
• Catalog Number Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52-54
• Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55-56
 One Company
Connecting
The World
POWERFUL PRESENCE · PRODUCTS
PERFORMANCE · PEOPLE
General Cable has been a wire and cable innovator for over
170 years, always dedicated to connecting and powering people’s
lives. Today, with more than 14,500 employees and more than
$6 billion in revenues, we are one of the largest wire and cable
manufacturers in the world.

Our company serves customers through a global network of 57

manufacturing facilities in 26 countries and has worldwide sales
representation and distribution. We are dedicated to the production
of high-quality aluminum, copper and fiber optic wire and cable and
systems solutions for the energy, construction, industrial, specialty
and communications sectors. With a vast portfolio of products to
meet thousands of diverse application requirements, we continue to
invest in research and development in order to maintain and extend
our technology leadership by developing new materials, designing
new products, and creating new solutions to meet tomorrow’s
market challenges.

In addition to our strong brand recognition and strengths in

technology and manufacturing, General Cable is also competitive
in such areas as distribution and logistics, marketing, sales and
customer service. This combination enables us to better serve our
customers globally and as they expand into new geographic markets.

General Cable offers our customers all the

strengths and value of a large company, but our
people give us the agility and responsiveness of
a small one. We service you globally or locally.

Visit our Website at

www.generalcable.com
 Corporate Social Responsibility
C R E AT I N G S H A R E D VA LU E

General Cable believes corporate social responsibility (CSR) is about creating shared value.
That means keeping a dual focus in our business decisions: what is good for us as a company
and what contributes to the greater good of the communities in which we live and work.

SAFETY
Working safer by working together
General Cable has one worldwide safety vision and goal – ZERO & BEYOND. We measure safety
performance globally, share best practices and implement sound health and safety management
systems. Many of our facilities worldwide are OHSAS 18001 (safety management system) certified.
All North American facilities have implemented an equivalent health and safety management system.
General Cable was a pioneer in obtaining the OHSAS 18001 Certificate for Occupational Health and
Safety Management Systems in Europe and North Africa.

SUSTAINABILITY
Responsible practices in daily operations
As a global leader in the wire and cable industry, General Cable recognizes its role and responsibility
in promoting sustainability. Our strongest business value is continuous improvement in all areas of
our company. Across our many businesses, the quest to introduce new and better products through
continuous improvement in environmental designs reflects our commitment to achieving industry-leading
standards and responding proactively to global environmental issues. General Cable was the first cable
manufacturer to obtain certification for its environmental management system, in accordance with the
ISO 14001 and EMAS Standards.

CITIZENSHIP
A commitment to being good citizens
Being responsible citizens in our communities is of the utmost importance to us. Unequivocal honesty,
integrity, forthrightness and fair dealing have long been part of General Cable’s core values and are
expected globally in all of our business relationships with our customers, employees, suppliers, neighbors
and competitors. Our company leaders and employees strive to make a difference throughout a host of
volunteer activities and financial support, improving the communities in which we live and work.

INNOVATION
Technologies that power and connect the world
General Cable is delivering innovation that matters. We are focusing on R&D expertise
and investing in developing wire and cable solutions that meet the challenges confronting
our customers and the world. In working together and using all the ingenuity and
creativity we have, we will reach the goal of being the preeminent supplier of
wire and cabling solutions in the industry, with both green constructions
and designs for the ever-growing renewable energy market.

A commitment to achieving industry-leading standards

and responding proactively to environmental global issues.

+1.859.572.8000
info@generalcable.com

Visit www.GeneralCableCSR.com
to learn more.
Mining
Mining

Mining Cable Application Guide

ANACONDA®
CAROL® BRAND BRAND
INDUSTRIAL-GRADE MINING-GRADE
APPLICATION CABLES CABLES
UNDERGROUND MINING APPLICATIONS
Longwall Shearers X
Shuttle Cars X
Bridge Conveyors X
High-Voltage Distribution X
Cutting Machines X
Loading Machines X
Continuous Miners X
Drills X
Roof Bolters X
Locomotives X
Hydraulic Pumps X
Sectionalized Portable Power X
Borehole Cables X
Pumps X X
Accessory Equipment X X
Two-Conductor Welding X X
Belt Drives X X
Hydraulic Power Packs X X
Belt Take-Ups X X
Battery Changers X X
Conveyor Feeder/Breakers X X
SURFACE MINING APPLICATIONS
Drills X
Stripping Shovels X
Loading Shovels X
Drag Lines X
Pumps X X
Accessory Equipment X X
General Cable mining cables are manufactured in accordance with:
• ICEA S-75-381 Portable and Power Feeder Cables for Use in Mines and Similar Applications
• CAN/CSA C22.2 No. 96 Portable Power Cables, and certified by Natural Resources Canada
• CAN/CSA C22.2 No. 96.1 Mine Power Feeder Cables
• Mine Safety and Health Administration flame test requirements and accepted for listing by MSHA
 Mining

Mining Cable Product Constructions

General Cable offers the broadest line of mining- and industrial-grade flexible power cables.

Carol®
Brand Anaconda®
Industrial- Brand
Grade Mining-Grade
Construction Cables Cables Features and Benefits
Conductors: Bare Copper Conductor
• Fully Annealed Bare Copper X • Flexible conductor for industrial and static applications
• Fully Annealed Tinned Copper X • Cost-effective conductor designs where cable is not being
Type MP-GC: subjected to repetitive movement
• Fully Annealed Bare Copper X Tinned Copper Conductor
• Enhanced flex life and increased resistance to wire
breakage during repeated movement
• Additional corrosion resistance adds to service life
Insulation: EPR Insulation
• Premium-Grade EPR X X • Outstanding dielectric properties
Type MP-GC • Long life at temperatures rated from -40˚C to +90˚C
• Premium-Grade EPR X • Excellent moisture and corona resistance
• Premium-Grade XLPE X • Flexible for ease of handling

Shielding: Tinned Copper/Textile Composite Braid Shielding

Type SHD-GC and SHD-CGC/SHD-BGC: • Provides maximum shield flex life
• Copper/Textile Braid X Copper Tape Shielding (EIS)
Type MP-GC: • 100% coverage and added corona protection
• EIS/Copper Tape X (EIS - Extruded Insulation Shield)

Grounding Conductors: Bare Copper Grounding Conductor

Type G: • Flexible conductor for industrial applications
• Covered Bare Copper X • Cost-effective conductor designs where cable is not being
• Covered Tinned Copper X (Flat) subjected to repetitive movement
Type G-GC: Tinned Copper Grounding Conductor
• Covered Bare Copper X • Enhanced flex life and increased resistance to wire
• Covered Tinned Copper X (Flat) breakage during repeated movement
• Tinned Copper X • Additional corrosion resistance adds to service life
Type W:
• Covered Bare Copper X
• Covered Tinned Copper X
Type SHD-GC:
• Tinned Copper X
Type MP-GC:
• Tinned Copper X
Ground-Check Conductors: Ground-Check Conductor
• Insulated Bare Copper X X (Round) • Provides maximum reliability of the ground-check circuit in
• Insulated Tinned Copper X (Flat) all round constructions
• Insulated with high-strength polypropylene (Anaconda)
Jackets: Heavy-Duty, Single-Layer Jacket
Round Constructions: • Heavy-duty construction for non-critical applications and
• CV-Cured, Single-Layer, distribution cable
Reinforced Chlorinated X • Good physical characteristics with high degree of resistance
Polyethylene (CPE) to cutting, abrasion and medium-duty flexing
• Excellent general purpose industrial performance
• Lead-Cured, Two-Layer,
Reinforced Chlorinated X (Round) Extra-Heavy-Duty, Two-Layer Reinforced Jacket
Polyethylene (CPE) • Increased jacket tensile strength
Flat Constructions: • Increased mechanical strength for high flex applications
• Maximum mechanical protection against crushing and
• Lead-Cured, Chlorinated tearing
X (Flat)
Polyethylene (CPE) • Maximum abrasion resistance
Type MP-GC: • Preferred construction for mining machines
• Premium-Grade PVC X
• Lead-Cured, Chlorinated
X
Polyethylene (CPE)
*Anaconda® Brand Flat and Type MP-GC cables have an extra-heavy-duty, single-layer jacket.
Mining

Anaconda Brand Mining-Grade Cables

®
1

Index Page
®
Anaconda Brand Type W Power, Flat Parallel Portable
w/o Ground, EPR/CPE 2
®
Anaconda Brand Type W Power, Flat Parallel Portable,
EPR/CPE 3
®
Anaconda Brand Type W Power, Round Portable, EPR/CPE 4
Anaconda® Brand Type G Power, Flat Parallel Portable
w/Ground, EPR/CPE 5
Anaconda® Brand—when Our Anaconda® Brand Anaconda® Brand Type G-GC Power, Flat Parallel Portable
w/Ground-Check, EPR/CPE 6
it comes to reliability and mining-grade products carry
®
performance in a mining a full range of listings and Anaconda Brand Type G-GC Power, Round Portable
w/Ground-Check, EPR/CPE 7
cable, one name stands certifications with MSHA ®
Anaconda Brand Type G-CGC Power, Round Portable
alone. Anaconda® Brand— and the Canadian Standard w/Extensible Ground-Check, EPR/CPE 8
the world’s premier extra- Association. In addition, the ®
Anaconda Brand Type SHD Power, Flat Portable
w/Ground, EPR/CPE, 2000 Volts 9
heavy-duty mining-grade products meet or exceed
®
cable. the requirements of ICEA Anaconda Brand Type SHD-GC Power, Shielded Round
Portable w/Ground-Check, EPR/CPE, 2000 Volts 10
S-75-381 Portable and
Engineered to endure the Anaconda® Brand Type SHD-GC Power, Shielded Round
Power-Feeder Cables for Portable w/Ground-Check, EPR/CPE, 2000 Volts 11
most severe and extreme
use in mines and similar Anaconda® Brand Type SHD-CGC Power, Shielded Round
demands of the toughest Portable w/Extensible Ground-Check, EPR/CPE, 2000 Volts 12
applications.
mining applications. In a ®
Anaconda Brand Type SHD-BGC Power, Shielded Round
class by itself, Anaconda® The advantage of General Portable w/Extensible Ground-Check, EPR/CPE, 2000 Volts 13

Brand sets the industry’s Cable’s experience and ®

Anaconda Brand Type SHD-GC Power, Shielded Round
Portable w/Ground-Check, EPR/CPE, 5000 Volts 14
highest performance expertise in mining cable ®
Anaconda Brand Type SHD-GC Power, Shielded Round
standard by which all others technology continues to Portable w/Ground-Check, EPR/CPE, 5000 Volts 15
are measured. With a provide practical benefits ®
Anaconda Brand Type SHD-CGC Power, Shielded Round
reinforced, two-layer, lead- over the entire life cycle Portable w/Extensible Ground-Check, EPR/CPE, 5000 Volts 16

cured thermoset jacket, of a particular cable in a Anaconda® Brand Type SHD-BGC Power, Shielded Round
Portable w/Extensible Ground-Check, EPR/CPE, 5000 Volts 17
Anaconda® Brand mining specific application. Better
Anaconda® Brand Type SHD-GC Power, Shielded Round
cables provide for the design and construction, Portable w/Ground-Check, EPR/CPE, 8000 Volts 18
ultimate in protection against more advanced materials ®
Anaconda Brand Type SHD-GC Power, Shielded Round
the worst hazards and give and process technology, and Portable w/Ground-Check, EPR/CPE, 8000 Volts 19

new meaning to dependable, more reliable performance ®

Anaconda Brand Type SHD-GC Power, Shielded Round
Portable w/Ground-Check, EPR/CPE, 15000 Volts 20
durable and reliable. When over a longer time all result in ®
Anaconda Brand Type SHD-GC Power, Shielded Round
the very best is a basic lower cost per ton. Portable w/Ground-Check, EPR/CPE, 15000 Volts 21
requirement, there is only one Anaconda® Brand Type SHD-GC Power, Shielded Round
Whatever the specific
preferred choice, Anaconda® Portable w/Ground-Check, EPR/CPE, 25000 Volts 22
requirement, General
Brand mining cables. Anaconda® Brand Type SHD-GC Power, Shielded Round
Cable can provide the best Portable w/Ground-Check, EPR/CPE, 25000 Volts 23
performance and best cost ®
Anaconda Brand Type VFD-BGC Power, Shielded Round
Portable w/Extensible Ground-Check, EPR/CPE, 2000 Volts 24
solution for any mining
® ®
Anaconda Brand Type MP-GC (Uniblend EPR),
application. Mine Power Feeder w/Ground-Check, EPR/CPE 25-28
®
Anaconda Brand Type MP-GC, Mine Power Feeder
w/Ground-Check, XLPE/PVC 29-30

1
Mining-Grade Cable Mining

Anaconda Brand Type W Power, Flat Parallel Portable

®

w/o Ground, EPR/CPE 2000 Volts, 90˚C, Two Conductor

Product Construction Applications: Compliances:

• Designed for use as trailing cables on DC • ICEA S-75-381 Portable and Power Feeder
Conductor: mining equipment Cables for use in mines and similar applications
• 4 AWG thru 4/0 AWG coated annealed copper, • Designed for use where diode grounding • Meets flame test requirements and is accepted
bunched wires, rope-lay-stranded per is employed for listing by MSHA
ASTM B172 • For battery charges and oil drilling rigs • Approved by the Pennsylvania Department of
Environmental Protection
Insulation: Features:
• Ethylene Propylene Rubber (EPR) insulation • Flat construction provides maximum resistance Packaging:
colored (black and white) to damage from crushing and runovers • Material cut to length and shipped on non-
• D-shaped insulation prevents conductors from returnable reels
Jacket: shifting under the jacket
• Extra-heavy-duty, lead-cured Chlorinated • Excellent physical toughness and heat stability
Polyethylene (CPE) • Excellent heat, moisture, steam, oil, chemical,
radiation and compression cut resistance
Jacket Marking: • Flexible for easy handling
• GENERAL CABLE® ANACONDA® BRAND (SIZE) • Resists cutting, impact, abrasion, flame
2/C FLAT TYPE W 2000 VOLTS P-102-109 and sunlight
MSHA • Excellent thermal stability and physical
properties over a broad temperature range
Options:
• Colored jackets are available
• Anamaxx® jacket

4 AWG THRU 4/0 AWG CONDUCTORS, TWO CONDUCTOR, FLAT PARALLEL

PORTABLE W/O GROUND, TYPE W - 2000 VOLTS
NOMINAL NOMINAL COPPER NET
INSULATION CABLE WEIGHT WEIGHT
COND. THICKNESS DIMENSIONS
CATALOG NO. OF SIZE COND. LBS/ kg/ LBS/ kg/
NUMBER COND. (AWG) STRAND INCHES mm INCHES mm 1000 FT km 1000 FT km AMPACITY

13115.550400 2 4 259 0.060 1.5 0.61 x 1.05 15.5 x 26.7 271 403 550 818 127
13115.550300 2 3 259 0.060 1.5 0.68 x 1.14 17.3 x 29.0 329 489 675 1005 145
13115.550200 2 2 259 0.060 1.5 0.73 x 1.24 18.5 x 31.5 412 613 810 1205 167
13101.814061 2 1 259 0.080 2.0 0.81 x 1.40 20.6 x 35.6 523 778 1020 1520 191
13151.499461 2 1/0 259 0.080 2.0 0.93 x 1.51 23.6 x 38.2 657 978 1265 1880 217
13152.844840 2 2/0 329 0.080 2.0 0.99 x 1.63 25.1 x 41.4 835 1242 1515 2255 250
13115.755300 2 3/0 413 0.080 2.0 1.03 x 1.77 26.2 x 45.0 1048 1560 1810 2694 286
13115.755400 2 4/0 532 0.080 2.0 1.10 x 1.89 27.9 x 48.0 1363 2028 2175 3237 328
Stock items are available in long lengths for cutting to your specifications. All lengths are subject to a tolerance of +/-5%.
Dimensions and weights shown are nominal; subject to standard industry tolerances. Actual shipping weight may vary.
These ampacities are based on a conductor temperature of 90°C and an ambient air temperature of 40°C, per ICEA S-75-381,
NEMA WC58. For ampacities per National Electrical Code® requirements, refer to the latest NEC edition.

2
Mining Mining-Grade Cable

Anaconda Brand Type W Power, Flat Parallel Portable,

®

EPR/CPE 2000 Volts, 90˚C, Four Conductor

Product Construction Options: Features (cont’d.):

• Colored jackets are available • Excellent heat, moisture, steam, oil, chemical,
Conductor: • Anamaxx® jacket radiation and compression cut resistance
• 6 AWG thru 4/0 AWG coated annealed copper, • Flexible for easy handling
bunched wires, rope-lay-stranded per Applications: • Resists cutting, impact, abrasion, flame
ASTM B172 • Designed for use as trailing cables on AC mining and sunlight
equipment: • Excellent thermal stability and physical
Insulation: - Where a ground-check conductor is not properties over a broad temperature range
• Ethylene Propylene Rubber (EPR) insulation required for fail-safe ground monitoring
colored (black, white, red and green) - Where induced voltages in the grounding Compliances:
system do not present a hazard • ICEA S-75-381 Portable and Power Feeder
Jacket: Cables for use in mines and similar applications
• Extra-heavy-duty, lead-cured Chlorinated Features: • Meets flame test requirements and accepted for
Polyethylene (CPE) • Flat construction provides maximum resistance listing by MSHA
to damage from crushing and runovers • Approved by the Pennsylvania Department of
Jacket Marking: • Distributes tensile load uniformly among four Environmental Protection
• GENERAL CABLE® ANACONDA® BRAND (SIZE) conductors
4/C FLAT TYPE W 2000 VOLTS P-102-109 • Shaped insulation to prevent conductors from Packaging:
MSHA shifting under the jacket • Material cut to length and shipped on non-
• Excellent physical toughness and heat stability returnable reels

6 AWG THRU 4/0 AWG CONDUCTORS, FOUR CONDUCTOR,

FLAT PARALLEL PORTABLE, TYPE W - 2000 VOLTS
NOMINAL NOMINAL COPPER NET
INSULATION CABLE WEIGHT WEIGHT
COND. THICKNESS DIMENSIONS
CATALOG NO. OF SIZE COND. LBS/ kg/ LBS/ kg/
NUMBER COND. (AWG) STRAND INCHES mm INCHES mm 1000 FT km 1000 FT km AMPACITY

13106.824571 4 6 133 0.060 1.5 0.67 x 1.69 17.0 x 42.9 338 503 895 1332 79
13104.785463 4 4 259 0.060 1.5 0.75 x 1.89 19.0 x 48.0 518 771 1185 1764 104
13102.514941 4 2 259 0.060 1.5 0.81 x 2.23 20.6 x 56.6 824 1227 1620 2411 138
13192.800100 4 1 259 0.080 2.0 0.97 x 2.60 24.6 x 66.0 1045 1555 2100 3125 161
13192.805100 4 1/0 259 0.080 2.0 1.01 x 2.73 25.7 x 69.3 1314 1956 2500 3721 186
13192.905200 4 2/0 329 0.080 2.0 1.10 x 2.96 27.9 x 75.2 1670 2485 2900 4316 215
13192.905300 4 3/0 413 0.080 2.0 1.18 x 3.25 30.0 x 82.6 2096 3119 3500 5209 249
13192.905400 4 4/0 532 0.080 2.0 1.29 x 3.46 32.8 x 87.9 2726 4057 4225 6288 287
Stock items are available in long lengths for cutting to your specifications. All lengths are subject to a tolerance of +/-5%.
Dimensions and weights shown are nominal; subject to standard industry tolerances. Actual shipping weight may vary.
These ampacities are based on a conductor temperature of 90°C and an ambient air temperature of 40°C, per ICEA S-75-381,
NEMA WC58. For ampacities per National Electrical Code® requirements, refer to the latest NEC edition.

3
Mining-Grade Cable Mining

Anaconda Brand Type W Power, Round Portable, EPR/CPE

®

2000 Volts, 90˚C, Four Conductor

Product Construction Options: Features (cont’d.):

• Colored jackets are available • Two-layer jacket is reinforced to provide
Conductor: • Anamaxx® jacket maximum protection from mechanical
• 6 AWG thru 500 kcmil coated annealed copper, damage — the cause of most portable cable
bunched wires, rope-lay-stranded per Applications: failures
ASTM B172 • Designed for use as trailing cables on AC mining
equipment: Compliances:
Insulation: - Where a ground-check conductor is not • ICEA S-75-381 Portable and Power Feeder
• Ethylene Propylene Rubber (EPR) insulation required for fail-safe ground monitoring Cables for use in mines and similar applications
colored (black, white, red and green) - Where induced voltages do not present a • Meets flame test requirements and is accepted
problem for listing by MSHA
Jacket: • Approved by the Pennsylvania Department of
• Reinforced, two-layer, extra-heavy-duty, lead- Features: Environmental Protection
cured Chlorinated Polyethylene (CPE) • Rope-lay-stranded conductors are extremely • Meets CAN/CSA C22.2 No. 96 Portable Power
flexible and resistant to wire breakage Cables and is certified by Natural Resources
Jacket Marking: • Excellent heat, moisture, steam, oil, chemical Canada
• GENERAL CABLE® ANACONDA® BRAND (SIZE) and radiation resistance
4/C TYPE W 2000 VOLTS (-50C) FT1 FT5 CSA • Flexible for easy handling Packaging:
LR 27161 P-7K-102-045 MSHA • Resists cutting, impact, abrasion, flame • Material cut to length and shipped on non-
and sunlight returnable reels
• Excellent thermal stability and physical
properties over a broad temperature range

6 AWG THRU 500 KCMIL CONDUCTORS, FOUR CONDUCTOR,

ROUND PORTABLE, TYPE W - 2000 VOLTS
NOMINAL NOMINAL COPPER NET
COND. WEIGHT WEIGHT
INSULATION CABLE
SIZE THICKNESS O.D.
CATALOG NO. OF (AWG/ COND. LBS/ kg/ LBS/ kg/
NUMBER COND. kcmil) STRAND INCHES mm INCHES mm 1000 FT km 1000 FT km AMPACITY

13306.426312 4 6 133 0.060 1.5 1.10 27.9 341 507 838 1247 79
13304.440400 4 4 259 0.060 1.5 1.27 32.3 524 779 1174 1747 104
13306.340300 4 3 259 0.060 1.5 1.34 34.0 664 988 1377 2049 120
13302.440200 4 2 259 0.060 1.5 1.48 37.6 833 1239 1701 2531 138
13306.340100 4 1 259 0.080 2.0 1.68 42.7 1082 1610 2192 3262 161
13306.345100 4 1/0 259 0.080 2.0 1.79 45.5 1360 2025 2549 3793 186
13306.645200 4 2/0 329 0.080 2.0 1.93 49.0 1728 2572 3078 4581 215
13306.645300 4 3/0 413 0.080 2.0 2.07 52.6 2169 3228 3685 5485 249
13306.645400 4 4/0 532 0.080 2.0 2.26 57.4 2821 4199 4540 6758 287
13306.646000 4 250 608 0.095 2.4 2.66 67.6 3224 4798 5746 8553 320
13306.646200 4 350 851 0.095 2.4 2.98 75.7 4534 6748 7574 11275 394
13306.646500 4 500 1221 0.095 2.4 3.40 86.4 6506 9682 10376 15441 487
Stock items are available in long lengths for cutting to your specifications. All lengths are subject to a tolerance of +/-5%.
Dimensions and weights shown are nominal; subject to standard industry tolerances. Actual shipping weight may vary.
These ampacities are based on a conductor temperature of 90°C and an ambient air temperature of 40°C, per ICEA S-75-381,
NEMA WC58. For ampacities per National Electrical Code® requirements, refer to the latest NEC edition.
NOTE: For part numbers with CSA-approved color code, contact General Cable inside sales.

4
Mining Mining-Grade Cable

Anaconda Brand Type G Power, Flat Parallel Portable

®

w/Ground, EPR/CPE 2000 Volts, 90˚C, Two Conductor

Product Construction: Jacket Marking: Features (cont’d.):

• GENERAL CABLE® ANACONDA® BRAND (SIZE) • Excellent heat, moisture, steam, oil, chemical,
Conductor: 2/C FLAT TYPE G 2000 VOLTS P-102-109 radiation and compression cut resistance
• 4 AWG thru 4/0 AWG coated annealed copper, MSHA • Flexible for easy handling
bunched wires, rope-lay-stranded per • Resists cutting, impact, abrasion, flame
ASTM B172 Options: and sunlight
• Colored jackets are available • Excellent thermal stability and physical
Insulation: • Anamaxx® jacket properties over a broad temperature range
• Ethylene Propylene Rubber (EPR) insulation
colored (black and white) Applications: Compliances:
• Designed for use as trailing cables on DC • ICEA S-75-381 Portable and Power Feeder
Grounding Conductor: mining equipment Cables for use in mines and similar applications
• Coated copper, rope-lay-stranded and shaped • Designed for use where a grounding conductor • Meets flame test requirements and is accepted
with a green elastomer covering designed to is necessary for listing by MSHA
keep the grounding conductor in place in the flat • Approved by the Pennsylvania Department of
assembly Features: Environmental Protection
• Flat construction provides maximum resistance
Jacket: to damage from crushing and runovers Packaging:
• Extra-heavy-duty, lead-cured Chlorinated • D-shaped insulation prevents conductors from • Material cut to length and shipped on non-
Polyethylene (CPE) shifting under the jacket returnable reels
• Excellent physical toughness and heat stability

4 AWG THRU 4/0 AWG CONDUCTORS, TWO CONDUCTOR,

FLAT PARALLEL PORTABLE W/GROUND, TYPE G - 2000 VOLTS
NOMINAL NOMINAL COPPER NET
GRD. WEIGHT WEIGHT
INSULATION CABLE
COND. COND.
THICKNESS DIMENSIONS
CATALOG NO. OF SIZE COND. SIZE LBS/ kg/ LBS/ kg/
NUMBER COND. (AWG) STRAND INCHES mm (AWG) INCHES mm 1000 FT km 1000 FT km AMPACITY

13116.550400 2 4 259 0.060 1.5 7 0.61 x 1.15 15.5 x 29.2 326 485 635 945 127
13116.550300 2 3 259 0.060 1.5 6 0.68 x 1.26 17.3 x 32.0 412 613 785 1170 145
13102.830713 2 2 259 0.060 1.5 5 0.73 x 1.35 18.5 x 34.3 518 770 935 1390 167
13101.629210 2 1 259 0.080 2.0 4 0.81 x 1.55 20.6 x 39.4 655 975 1185 1760 191
13151.752132 2 1/0 259 0.080 2.0 3 0.93 x 1.67 23.6 x 42.4 843 1254 1470 2190 217
13114.755200 2 2/0 329 0.080 2.0 2 0.99 x 1.85 25.1 x 47.0 1045 1555 1790 2660 250
13116.755300 2 3/0 413 0.080 2.0 1 1.03 x 2.00 26.2 x 50.8 1309 1949 2145 3190 286
13116.755400 2 4/0 532 0.080 2.0 1/0 1.10 x 2.10 27.9 x 53.3 1698 2527 2545 3790 328
Stock items are available in long lengths for cutting to your specifications. All lengths are subject to a tolerance of +/-5%.
Dimensions and weights shown are nominal; subject to standard industry tolerances. Actual shipping weight may vary.
These ampacities are based on a conductor temperature of 90°C and an ambient air temperature of 40°C, per ICEA S-75-381,
NEMA WC58. For ampacities per National Electrical Code® requirements, refer to the latest NEC edition.

5
Mining-Grade Cable Mining

Anaconda Brand Type G-GC Power, Flat Parallel Portable

®

w/Ground-Check, EPR/CPE 2000 Volts, 90˚C, Three Conductor

Product Construction Jacket Marking: Features (cont’d.):

• GENERAL CABLE® ANACONDA® BRAND (SIZE) • Flexible for easy handling
Conductor: 3/C FLAT TYPE G-GC 2000 VOLTS P-102-109 • Resists cutting, impact, abrasion and flame
• 6 AWG thru 4/0 AWG coated annealed copper, MSHA • Excellent thermal stability and physical
bunched wires, rope-lay-stranded per properties over a broad temperature range
ASTM B172 Options:
• Colored jackets are available Compliances:
Insulation: • Anamaxx® jacket • ICEA S-75-381 Portable and Power Feeder
• Ethylene Propylene Rubber (EPR) insulation Cables for use in mines and similar applications
colored (black, white and red) Applications: • Meets flame test requirements and is accepted
• Designed for use as trailing cables on AC mining for listing by MSHA
Ground-Check Conductor: equipment: • Approved by the Pennsylvania Department of
• Coated copper, rope-lay-stranded and shaped - Where ground monitoring is accomplished Environmental Protection
ground-check conductor is insulated with a with a ground-check conductor
yellow elastomer - Where induced voltages in the grounding Packaging:
system do not present a hazard • Material cut to length and shipped on non-
Grounding Conductor: returnable reels
• Coated copper, rope-lay-stranded and shaped Features:
with a green elastomer covering designed to • Flat construction provides maximum resistance
keep the grounding conductor in place in the to damage from crushing and runovers
flat assembly • Shaped insulation to prevent conductors from
shifting under the jacket
Jacket: • Excellent physical toughness and heat stability
• Extra-heavy-duty, lead-cured Chlorinated • Excellent heat, moisture, steam, oil, chemical,
Polyethylene (CPE) radiation and compression cut resistance

6 AWG THRU 4/0 AWG CONDUCTORS, THREE CONDUCTOR,

FLAT PARALLEL PORTABLE W/GROUND-CHECK, TYPE G-GC - 2000 VOLTS
NOMINAL NOMINAL COPPER NET
INSULATION GRD. CABLE WEIGHT WEIGHT
COND. THICKNESS COND. GRD-CHECK DIMENSIONS
CATALOG NO. OF SIZE COND. SIZE COND. SIZE LBS/ kg/ LBS/ kg/
NUMBER COND. (AWG) STRAND INCHES mm (AWG) (AWG) INCHES mm 1000 FT km 1000 FT km AMPACITY

13162.650600 3 6 133 0.060 1.5 8 8 0.66 x 1.67 16.8 x 42.4 357 532 900 1340 79
13162.650400 3 4 259 0.060 1.5 7 8 0.72 x 1.87 18.3 x 47.5 507 755 1175 1750 104
13164.550300 3 3 259 0.060 1.5 6 6 0.78 x 2.08 19.8 x 52.8 660 982 1395 2080 120
13102.177012 3 2 259 0.060 1.5 5 6 0.85 x 2.23 21.6 x 56.6 807 1201 1625 2415 138
13164.550100 3 1 259 0.080 2.0 4 6 0.96 x 2.50 24.4 x 63.5 1000 1488 2090 3110 161
13164.555100 3 1/0 259 0.080 2.0 3 5 1.01 x 2.67 25.6 x 67.8 1258 1871 2470 3675 186
13164.755200 3 2/0 329 0.080 2.0 2 5 1.09 x 2.86 27.7 x 68.1 1567 2333 2940 4375 215
13164.755300 3 3/0 413 0.080 2.0 1 5 1.18 x 3.12 30.0 x 79.2 1939 2885 3515 5230 249
13164.755400 3 4/0 532 0.080 2.0 1/0 5 1.24 x 3.30 31.5 x 83.8 2485 3698 4245 6315 287
Stock items are available in long lengths for cutting to your specifications. All lengths are subject to a tolerance of +/-5%.
Dimensions and weights shown are nominal; subject to standard industry tolerances. Actual shipping weight may vary.
These ampacities are based on a conductor temperature of 90°C and an ambient air temperature of 40°C, per ICEA S-75-381, NEMA WC58.
For ampacities per National Electrical Code® requirements, refer to the latest NEC edition.

6
Mining Mining-Grade Cable

Anaconda Brand Type G-GC Power, Round Portable

®

w/Ground-Check, EPR/CPE 2000 Volts, 90˚C, Three Conductor

Product Construction Jacket Marking: Features (cont’d.):

• GENERAL CABLE® ANACONDA® BRAND (SIZE) • Excellent heat, moisture, steam, oil, chemical
Conductor: 3/C TYPE G-GC 2000 VOLTS FT1 FT5 and radiation resistance
• 6 AWG thru 500 kcmil coated annealed copper, P-7K-102-045 MSHA • Flexible for easy handling
bunched wires, rope-lay-stranded per • Resists cutting, impact, abrasion, flame
ASTM B172 Options: and sunlight
• Colored jackets are available • Excellent thermal stability and physical
Insulation: • Anamaxx® jacket properties over a broad temperature range
• Ethylene Propylene Rubber (EPR) insulation • Two-layer jacket is reinforced to provide
colored (black, white and red) Applications: maximum protection from mechanical damage—
• Designed for use as trailing cables on AC mining the cause of most portable cable failures
Ground-Check-Conductor: equipment:
• Annealed copper, rope-lay-stranded per ASTM - Where a ground-check conductor is required Compliances:
B172, insulated with high-strength yellow for fail-safe monitoring • ICEA S-75-381 Portable and Power Feeder
polypropylene - Where induced voltages in the grounding Cables for use in mines and similar applications
system will not present a hazard • Meets flame test requirements and is accepted
Grounding Conductors: for listing by MSHA
• Two coated copper, rope-lay-stranded per Features: • Approved by the Pennsylvania Department of
ASTM B172 • Ground-check-conductor provides fail-safe Environmental Protection
ground monitoring for maximum safety
Jacket: • Improved ground-check conductor has longer Packaging:
• Reinforced, two-layer, extra-heavy-duty, lead- flex life and durability • Material cut to length and shipped on non-
cured Chlorinated Polyethylene (CPE) • Rope-lay-stranded conductors are extremely returnable reels
flexible and resistant to wire breakage

6 THRU 500 KCMIL CONDUCTORS, THREE CONDUCTOR,

ROUND PORTABLE W/GROUND-CHECK, TYPE G-GC - 2000 VOLTS
NOMINAL NOMINAL COPPER NET
INSULATION GRD. CABLE WEIGHT WEIGHT
COND. THICKNESS COND. GRD-CHECK 0.D.
CATALOG NO. OF SIZE COND. SIZE COND. SIZE LBS/ kg/ LBS/ kg/
NUMBER COND. (AWG) STRAND INCHES mm (AWG) (AWG) INCHES mm 1000 FT km 1000 FT km AMPACITY

13306.644092 3 6 133 0.060 1.5 10 10 1.05 26.6 360 536 735 1094 79
13304.693196 3 4 259 0.060 1.5 8 10 1.19 30.2 533 794 1065 1585 104
13354.340300 3 3 259 0.060 1.5 8 10 1.24 31.5 654 974 1245 1853 120
13302.772159 3 2 259 0.060 1.5 7 10 1.34 34.0 791 1178 1480 2202 138
13301.422060 3 1 259 0.080 2.0 6 8 1.51 38.3 1016 1512 1885 2805 161
13351.608053 3 1/0 259 0.080 2.0 5 8 1.65 41.9 1263 1880 2290 3408 186
13352.555382 3 2/0 329 0.080 2.0 4 8 1.75 44.4 1581 2352 2710 4033 215
13354.645300 3 3/0 413 0.080 2.0 3 8 1.89 48.0 2023 3010 3270 4866 249
13354.774063 3 4/0 532 0.080 2.0 2 8 2.04 51.8 2535 3773 3975 5915 287
13354.646000 3 250 608 0.095 2.4 2 6 2.39 60.7 2932 4364 4950 7366 320
13352.556200 3 350 851 0.095 2.4 1/0 6 2.68 68.0 4068 6054 6625 9859 394
13354.646500 3 500 1221 0.095 2.4 2/0 6 3.03 76.9 5831 8677 8890 13230 487
Stock items are available in long lengths for cutting to your specifications. All lengths are subject to a tolerance of +/-5%.
Dimensions and weights shown are nominal; subject to standard industry tolerances. Actual shipping weight may vary.
These ampacities are based on a conductor temperature of 90°C and an ambient air temperature of 40°C, per ICEA S-75-381, NEMA WC58.
For ampacities per National Electrical Code® requirements, refer to the latest NEC edition.

7
Mining-Grade Cable Mining

Anaconda Brand Type G-CGC Power, Round Portable

®

w/Extensible Ground-Check, EPR/CPE 2000 Volts, 90˚C, Three Conductor

Product Construction Jacket Marking: Features (cont’d):

• GENERAL CABLE® ANACONDA® BRAND (SIZE) • G-CGC can also be used as a Type G cable
Conductor: 3/C TYPE G-CGC 2000 VOLTS P-7K-102-045 • Excellent heat, moisture, steam, oil, chemical
• 1 AWG thru 500 kcmil coated annealed copper, MSHA and radiation resistance
bunched wires, rope-lay-stranded per • Flexible for easy handling
ASTM B172 Options: • Resists cutting, impact, abrasion, flame
• Colored jackets are available and sunlight
Insulation: • Anamaxx® jacket • Excellent thermal stability and physical
• Ethylene Propylene Rubber (EPR) insulation properties over a broad temperature range
colored (black, white and red) Applications: • Two-layer jacket is reinforced to provide
• Designed for use as trailing cables on AC mining maximum protection from mechanical damage—
Ground-Check Conductor: equipment: the cause of most portable cable failures
• Coated copper specially stranded to provide - Where a ground-check conductor is required
extensibility without sustaining tensile load, for fail-safe ground monitoring Compliances:
thereby providing maximum resistance to flex - With wireless ground monitoring systems • ICEA S-75-381 Portable and Power Feeder
fatigue (The symmetrical grounding system does not Cables for use in mines and similar applications
• Insulated with high-strength polypropylene and produce induced voltages when operating in a • Meets flame test requirements and is accepted
placed in the center interstice balanced 3-phase system) for listing by MSHA
• Approved by the Pennsylvania Department of
Grounding Conductors: Features: Environmental Protection
• Three coated copper, rope-lay-stranded per • Improved ground-check conductor has longer
ASTM B172 flex life and durability Packaging:
• Rope-lay-stranded conductors are extremely • Material cut to length and shipped on non-
Jacket: flexible and resistant to wire breakage returnable reels
• Reinforced, two-layer, extra-heavy-duty, lead- • Symmetrical grounding system does not
cured Chlorinated Polyethylene (CPE) produce induced voltages when operating in a
balanced 3-phase system

1 AWG THRU 500 KCMIL CONDUCTORS, THREE CONDUCTOR,

ROUND PORTABLE W/EXTENSIBLE GROUND-CHECK, TYPE G-CGC - 2000 VOLTS
NOMINAL NOMINAL COPPER NET
COND. INSULATION GRD. CABLE WEIGHT WEIGHT
SIZE THICKNESS COND. GRD-CHECK 0.D.
CATALOG NO. OF (AWG/ COND. SIZE COND. SIZE LBS/ kg/ LBS/ kg/
NUMBER COND. kcmil) STRAND INCHES mm (AWG) (AWG) INCHES mm 1000 FT km 1000 FT km AMPACITY

13329.340100 3 1 259 0.080 2.0 7 16 1.65 41.9 1030 1533 2060 2798 161
13329.345100 3 1/0 259 0.080 2.0 6 16 1.72 43.7 1294 1926 2350 3408 186
13329.645200 3 2/0 329 0.080 2.0 5 16 1.89 48.0 1637 2436 2760 4018 215
13329.645300 3 3/0 413 0.080 2.0 4 16 2.03 51.6 2042 3038 3300 4837 249
13329.645400 3 4/0 532 0.080 2.0 3 16 2.16 54.9 2638 3926 3965 5901 287
13329.646000 3 250 608 0.095 2.4 2 16 2.39 60.7 3070 4569 5015 7463 320
13329.646200 3 350 851 0.095 2.4 1 16 2.68 68.1 4224 6286 6595 9814 394
13329.646500 3 500 1221 0.095 2.4 2/0 16 3.03 77.0 6188 9208 9040 13453 487
Stock items are available in long lengths for cutting to your specifications. All lengths are subject to a tolerance of +/-5%.
Dimensions and weights shown are nominal; subject to standard industry tolerances. Actual shipping weight may vary.
These ampacities are based on a conductor temperature of 90°C and an ambient air temperature of 40°C, per ICEA S-75-381,
NEMA WC58. For ampacities per National Electrical Code® requirements, refer to the latest NEC edition.

8
Mining Mining-Grade Cable

Anaconda Brand Type SHD Power, Flat Portable

®

w/Ground, EPR/CPE 2000 Volts, 90˚C, Three Conductor

Product Construction Jacket Marking: Features (cont’d):

• GENERAL CABLE® ANACONDA® BRAND (SIZE) • Resists cutting, impact, abrasion, flame and
Conductor: 3/C FLAT TYPE SHD 2000 VOLTS P-7K-102132 sunlight
• 2 AWG thru 3/0 AWG coated annealed copper, MSHA • Excellent thermal stability and physical
bunched wires, rope-lay-stranded per ASTM properties over a broad temperature range
B172 Options:
• Colored jackets are available Compliances:
Insulation: • Anamaxx® jacket • ICEA S-75-381 Portable and Power Feeder
• Ethylene Propylene Rubber (EPR) insulation Cables for use in mines and similar applications
Applications: • Meets flame test requirements and is accepted
Insulation Shield: • Designed for use as trailing cables on AC mining for listing by MSHA
• A flexible coated copper/textile braid shield is equipment: • Approved by the Pennsylvania Department of
applied over a non-conducting overlapped tape - Where induced voltages in the grounding Environmental Protection
system will not produce a hazard
Grounding Conductors: - On low- and medium-voltage AC circuits Packaging:
• Coated copper, rope-lay-stranded per where shielding is desired or required • Material cut to length and shipped on non-
ASTM B172 returnable reels
• Two conductors, shaped and covered with an Features:
extruded semi-conducting shield • Flexible insulation shield provides shock hazard
protection
Jacket: • Excellent heat, moisture, steam, oil, chemical
• Reinforced, extra-heavy-duty, lead-cured and radiation resistance
Chlorinated Polyethylene (CPE) • Flexible for easy handling

2 AWG THRU 3/0 AWG CONDUCTORS, THREE CONDUCTOR,

FLAT PORTABLE W/GROUND, TYPE SHD - 2000 VOLTS
NOMINAL NOMINAL COPPER NET
INSULATION GRD. CABLE WEIGHT WEIGHT
COND. THICKNESS COND. DIMENSIONS
CATALOG NO. OF SIZE COND. SIZE LBS/ kg/ LBS/ kg/
NUMBER COND. (AWG) STRAND INCHES mm (AWG) INCHES mm 1000 FT km 1000 FT km AMPACITY

13792.020200 3 2 259 0.070 1.8 6 0.94 x 2.45 23.9 x 62.2 938 1395 2243 3338 159
13792.020100 3 1 259 0.080 2.0 5 1.04 x 2.64 26.4 x 67.1 1156 1721 2540 3780 184
13792.025100 3 1/0 259 0.080 2.0 4 1.08 x 2.82 27.4 x 71.6 1414 2104 2915 4338 211
13790.025200 3 2/0 329 0.080 2.0 3 1.18 x 2.99 30.0 x 76.0 1766 2628 3346 4980 243
13792.025300 3 3/0 413 0.080 2.0 2 1.25 x 3.29 31.8 x 83.6 2173 3234 3890 5789 279
Stock items are available in long lengths for cutting to your specifications. All lengths are subject to a tolerance of +/-5%.
Dimensions and weights shown are nominal; subject to standard industry tolerances. Actual shipping weight may vary.
These ampacities are based on a conductor temperature of 90°C and an ambient air temperature of 40°C, per ICEA S-75-381,
NEMA WC58. For ampacities per National Electrical Code® requirements, refer to the latest NEC edition.

9
Mining-Grade Cable Mining

Anaconda Brand Type SHD-GC Power, Shielded Round

®

Portable w/Ground-Check, EPR/CPE 2000 Volts, 90˚C, Three Conductor

Product Construction Jacket Marking: Features (cont’d):

• GENERAL CABLE® ANACONDA® BRAND (SIZE) • Flexible for easy handling
Conductor: 3/C TYPE SHD-GC 2000 VOLTS P-7K-102-045 • Resists cutting, impact, abrasion, flame
• 6 AWG thru 500 kcmil coated annealed copper, MSHA and sunlight
bunched wires, rope-lay-stranded per • Excellent thermal stability and physical
ASTM B172 Options: properties over a broad temperature range
• Colored jackets are available • Two-layer jacket is reinforced to provide
Insulation: • TPU (Thermoplastic Polyurethane) jacket maximum protection from mechanical damage—
• Ethylene Propylene Rubber (EPR) insulation • Anamaxx® jacket the cause of most portable cable failures

Insulation Shield: Applications: Compliances:

• A flexible coated copper/textile braid shield is • Designed for use as trailing cables on AC mining • ICEA S-75-381 Portable and Power Feeder
applied over non-conducting overlapped tape equipment: Cables for use in mines and similar applications
- Where a ground-check conductor is required • Meets flame test requirements and is accepted
Ground-Check Conductor: for fail-safe monitoring for listing by MSHA
• Annealed copper, rope-lay-stranded per ASTM - With Bretby-type cable handling devices on • Approved by the Pennsylvania Department of
B172, insulated with high-strength yellow longwall shearers Environmental Protection
polypropylene - Where induced voltages in the grounding
system will not produce a hazard Packaging:
Grounding Conductors: - On low- and medium-voltage AC circuits • Material cut to length and shipped on non-
• Coated copper, rope-lay-stranded per where shielding is desired or required returnable reels
ASTM B172
• Two conductors in contact with the flexible Features:
copper braid shield • Flexible insulation shield provides shock hazard
protection
Jacket: • Excellent heat, moisture, steam, oil, chemical
• Reinforced, two-layer, extra-heavy-duty, lead- and radiation resistance
cured Chlorinated Polyethylene (CPE)

6 AWG THRU 500 KCMIL CONDUCTORS, THREE CONDUCTOR,

SHIELDED ROUND PORTABLE W/GROUND-CHECK, TYPE SHD-GC - 2000 VOLTS
NOMINAL NOMINAL NOMINAL COPPER NET
COND. INSULATION GRD. JACKET CABLE WEIGHT WEIGHT
SIZE THICKNESS COND. GRD-CHECK THICKNESS 0.D.
CATALOG NO. OF (AWG/ COND. SIZE COND. SIZE LBS/ kg/ LBS/ kg/
NUMBER COND. kcmil) STRAND INCHES mm (AWG) (AWG) INCHES mm INCHES mm 1000 FT km 1000 FT km AMPACITY

13306.240600 3 6 133 0.070 1.8 10 10 0.155 3.9 1.29 32.8 502 748 1130 1682 93
13306.240400 3 4 259 0.070 1.8 8 10 0.155 3.9 1.40 35.6 678 1009 1460 2173 122
13349.340300 3 3 259 0.070 1.8 7 10 0.170 4.3 1.51 38.3 831 1237 1680 2500 140
13302.253396 3 2 259 0.070 1.8 6 8 0.170 4.3 1.59 40.4 1007 1499 1990 2961 159
13301.814577 3 1 259 0.080 2.0 5 8 0.190 4.8 1.76 44.7 1228 1828 2385 3549 184
13351.179353 3 1/0 259 0.080 2.0 4 8 0.190 4.8 1.86 47.2 1485 2210 2765 4115 211
13352.658076 3 2/0 329 0.080 2.0 3 8 0.205 5.2 2.00 50.8 1832 2726 3255 4844 243
13349.645300 3 3/0 413 0.080 2.0 2 8 0.205 5.2 2.13 54.1 2249 3347 3890 5789 279
13354.490389 3 4/0 532 0.080 2.0 1 8 0.220 5.6 2.31 58.7 2854 4248 4720 7024 321
13349.646000 3 250 608 0.095 2.4 1/0 6 0.220 5.6 2.51 63.8 3325 4949 5460 8125 355
13349.646100 3 300 741 0.095 2.4 1/0 6 0.235 6.0 2.68 68.1 3946 5873 6395 9517 398
13362.315522 3 350 851 0.095 2.4 2/0 6 0.235 6.4 2.81 71.4 4493 6686 7280 10834 435
13349.646500 3 500 1221 0.095 2.4 4/0 6 0.265 6.7 3.19 81.0 6641 9883 9820 14614 536
Stock items are available in long lengths for cutting to your specifications. All lengths are subject to a tolerance of +/-5%.
Dimensions and weights shown are nominal, subject to standard industry tolerances. Actual shipping weight may vary.
These ampacities are based on a conductor temperature of 90°C and an ambient air temperature of 40°C, per ICEA S-75-381,
NEMA WC58. For ampacities per National Electrical Code® requirements, refer to the latest NEC edition.

10
Mining Mining-Grade Cable

Anaconda Brand Type SHD-GC Power, Shielded Round

®

Portable w/Ground-Check, EPR/CPE 2000 Volts, 90˚C, Three Conductor

Product Construction Jacket Marking: Features (cont’d):

• GENERAL CABLE® ANACONDA® BRAND (SIZE) • Flexible for easy handling
Conductor: 3/C TYPE SHD-GC 2000 VOLTS (-50C) FT1 FT5 • Resists cutting, impact, abrasion, flame
• 6 AWG thru 500 kcmil coated annealed copper, CSA LR 27161 P-7K-102-045 MSHA and sunlight
bunched wires, rope-lay-stranded per • Excellent thermal stability and physical
ASTM B172 Options: properties over a broad temperature range
• Colored jackets are available • Two-layer jacket is reinforced to provide
Insulation: • TPU (Thermoplastic Polyurethane) jacket maximum protection from mechanical damage—
• Ethylene Propylene Rubber (EPR) insulation • Anamaxx® jacket the cause of most portable cable failures

Insulation Shield: Applications: Compliances:

• A flexible coated copper/textile braid shield is • Designed for use as trailing cables on AC mining • ICEA S-75-381 Portable and Power Feeder
applied over non-conducting overlapped tape equipment: Cables for use in mines and similar applications
- Where a ground-check conductor is required • Meets flame test requirements and is accepted
Ground-Check Conductor: for fail-safe monitoring for listing by MSHA
• Annealed copper, rope-lay-stranded per ASTM - With Bretby-type cable handling devices on • Approved by the Pennsylvania Department of
B172, insulated with high-strength yellow longwall shearers Environmental Protection
polypropylene - Where induced voltages in the grounding • Meets CAN/CSA C22.2 No. 96 Portable Power
system will not produce a hazard Cables and is certified by Natural Resources
Grounding Conductors: - On low- and medium-voltage AC circuits Canada
• Coated copper, rope-lay-stranded per where shielding is desired or required
ASTM B172 Packaging:
• Two conductors in contact with the flexible Features: • Material cut to length and shipped on non-
copper braid shield • Flexible insulation shield provides shock hazard returnable reels
protection
Jacket: • Excellent heat, moisture, steam, oil, chemical
• Reinforced, two-layer, extra-heavy-duty, lead- and radiation resistance
cured Chlorinated Polyethylene (CPE)

6 AWG THRU 500 KCMIL CONDUCTORS, THREE CONDUCTOR,

SHIELDED ROUND PORTABLE W/GROUND-CHECK, TYPE SHD-GC - 2000 VOLTS
NOMINAL NOMINAL NOMINAL COPPER NET
COND. INSULATION GRD. JACKET CABLE WEIGHT WEIGHT
SIZE THICKNESS COND. GRD-CHECK THICKNESS 0.D.
CATALOG NO. OF (AWG/ COND. SIZE COND. SIZE LBS/ kg/ LBS/ kg/
NUMBER COND. kcmil) STRAND INCHES mm (AWG) (AWG) INCHES mm INCHES mm 1000 FT km 1000 FT km AMPACITY

13306.240600.CA 3 6 133 0.070 1.8 10 10 0.155 3.9 1.29 32.8 502 748 1130 1682 93
13306.240400.CA 3 4 259 0.070 1.8 8 10 0.155 3.9 1.40 35.6 678 1009 1460 2173 122
13349.340300.CA 3 3 259 0.070 1.8 7 10 0.170 4.3 1.51 38.3 831 1237 1680 2500 140
13302.253396.CA 3 2 259 0.070 1.8 6 8 0.170 4.3 1.59 40.4 1007 1499 1990 2961 159
13301.814577.CA 3 1 259 0.080 2.0 5 8 0.190 4.8 1.76 44.7 1228 1828 2385 3549 184
13351.179353.CA 3 1/0 259 0.080 2.0 4 8 0.190 4.8 1.86 47.2 1485 2210 2765 4115 211
13352.658076.CA 3 2/0 329 0.080 2.0 3 8 0.205 5.2 2.00 50.8 1832 2726 3255 4844 243
13349.645300.CA 3 3/0 413 0.080 2.0 2 8 0.205 5.2 2.13 54.1 2249 3347 3890 5789 279
13354.490389.CA 3 4/0 532 0.080 2.0 1 8 0.220 5.6 2.31 58.7 2854 4248 4720 7024 321
13349.646000.CA 3 250 608 0.095 2.4 1/0 6 0.220 5.6 2.51 63.8 3325 4949 5460 8125 355
13349.646100.CA 3 300 741 0.095 2.4 1/0 6 0.235 6.0 2.68 68.1 3946 5873 6395 9517 398
13362.315522.CA 3 350 851 0.095 2.4 2/0 6 0.235 6.4 2.81 71.4 4493 6686 7280 10834 435
13349.646500.CA 3 500 1221 0.095 2.4 4/0 6 0.265 6.7 3.19 81.0 6641 9883 9820 14614 536
Stock items are available in long lengths for cutting to your specifications. All lengths are subject to a tolerance of +/-5%.
Dimensions and weights shown are nominal, subject to standard industry tolerances. Actual shipping weight may vary.
These ampacities are based on a conductor temperature of 90°C and an ambient air temperature of 40°C, per ICEA S-75-381,
NEMA WC58. For ampacities per National Electrical Code® requirements, refer to the latest NEC edition.

11
Mining-Grade Cable Mining

Anaconda Brand Type SHD-CGC Power, Shielded Round

®

Portable w/Extensible Ground-Check, EPR/CPE

2000 Volts, 90˚C, Three Conductor

Product Construction Jacket Marking: Features (cont’d):

• GENERAL CABLE® ANACONDA® BRAND • Flexible for easy handling
Conductor: (SIZE) 3/C TYPE SHD-CGC 2000 VOLTS • Resists cutting, impact, abrasion, flame
• 1 AWG thru 500 kcmil coated annealed copper, P-7K-102-045 MSHA and sunlight
bunched wires, rope-lay-stranded per ASTM • Excellent thermal stability and physical
B172 Options: properties over a broad temperature range
• Colored jackets are available • Two-layer jacket is reinforced to provide
Insulation: • TPU (Thermoplastic Polyurethane) jacket maximum protection from mechanical
• Ethylene Propylene Rubber (EPR) insulation • Anamaxx® jacket damage—the cause of most portable
cable failures
Insulation Shield: Applications:
• A flexible coated copper/textile braid shield is • Designed for use as a trailing cable on AC Compliances:
applied over a non-conducting overlapped tape mining equipment: • ICEA S-75-381 Portable and Power Feeder
- Where maximum safety is mandatory, Cables for use in mines and similar applications
Ground-Check Conductor: including underground mining machines where • Meets flame test requirements and is accepted
• Coated copper, specially stranded to provide induced voltages in an unbalanced grounding for listing by MSHA
extensibility without sustaining tensile load, system could be hazardous • Approved by the Pennsylvania Department of
thereby providing maximum resistance to flex - On low- and medium-voltage AC circuits Environmental Protection
fatigue where shielding is desired or required
• Insulated with high-strength polypropylene and Packaging:
placed in the center interstice Features: • Material cut to length and shipped on non-
• Flexible insulation shield provides shock hazard returnable reels
Grounding Conductors: protection
• Three coated copper, rope-lay-stranded per • Symmetrical grounding system does not
ASTM B172 in contact with the flexible braid produce induced voltages when operating in a
shield balanced 3-phase system
• Excellent heat, moisture, steam, oil, chemical
Jacket: and radiation resistance
• Reinforced, two-layer, extra-heavy-duty, lead-
cured Chlorinated Polyethylene (CPE)

1 AWG THRU 500 KCMIL CONDUCTORS, THREE CONDUCTOR, SHIELDED ROUND

PORTABLE W/EXTENSIBLE GROUND-CHECK, TYPE SHD-CGC - 2000 VOLTS
NOMINAL NOMINAL NOMINAL COPPER NET
COND. INSULATION GRD. JACKET CABLE WEIGHT WEIGHT
SIZE THICKNESS COND. GRD-CHECK THICKNESS 0.D.
CATALOG NO. OF (AWG/ COND. SIZE COND. SIZE LBS/ kg/ LBS/ kg/
NUMBER COND. kcmil) STRAND INCHES mm (AWG) (AWG) INCHES mm INCHES mm 1000 FT km 1000 FT km AMPACITY

13340.340100 3 1 259 0.080 2.0 7 16 0.190 4.8 1.85 47.0 1196 1780 2450 3645 184
13340.355100 3 1/0 259 0.080 2.0 6 16 0.190 4.8 1.95 49.5 1469 2186 2779 4129 211
13340.645200 3 2/0 329 0.080 2.0 5 16 0.205 5.2 2.09 53.1 1819 2708 3310 4925 243
13340.645300 3 3/0 413 0.080 2.0 4 16 0.205 5.2 2.21 56.1 2237 3330 3950 5877 279
13340.645400 3 4/0 532 0.080 2.0 3 16 0.220 5.6 2.36 59.9 2845 4233 4630 6889 321
13340.646000 3 250 608 0.095 2.4 2 16 0.235 6.0 2.51 63.8 3290 4896 5440 8096 355
13340.646100 3 300 741 0.095 2.4 1 16 0.235 6.0 2.68 68.1 4002 5956 6300 9375 398
13340.646200 3 350 851 0.095 2.4 1 16 0.235 6.4 2.81 71.4 4461 6639 7030 10462 435
13340.646500 3 500 1221 0.095 2.4 2/0 16 0.265 6.7 3.19 81.0 6460 9614 9525 14175 536
Stock items are available in long lengths for cutting to your specifications. All lengths are subject to a tolerance of +/-5%.
Dimensions and weights shown are nominal, subject to standard industry tolerances. Actual shipping weight may vary.
These ampacities are based on a conductor temperature of 90°C and an ambient air temperature of 40°C, per ICEA S-75-381,
NEMA WC58. For ampacities per National Electrical Code® requirements, refer to the latest NEC edition.

12
Mining Mining-Grade Cable

Anaconda Brand Type SHD-BGC Power, Shielded Round

®

Portable w/Extensible Ground-Check, EPR/CPE

2000 Volts, 90˚C, Three Conductor

Product Construction Jacket Marking: Features (cont’d):

• GENERAL CABLE® ANACONDA® BRAND (SIZE) • Flexible for easy handling
Conductor: 3/C TYPE SHD-BGC 2000 VOLTS (-50C) • Resists cutting, impact, abrasion, flame
• 1 AWG thru 500 kcmil coated annealed copper, FT1 FT5 CSA LR 27161 P-7K-102-045 MSHA and sunlight
bunched wires, rope-lay-stranded per ASTM • Excellent thermal stability and physical
B172 Options: properties over a broad temperature range
• Colored jackets are available • Two-layer jacket is reinforced to provide
Insulation: • TPU (Thermoplastic Polyurethane) jacket maximum protection from mechanical
• Ethylene Propylene Rubber (EPR) insulation • Anamaxx® jacket damage—the cause of most portable
cable failures
Insulation Shield: Applications:
• A flexible coated copper/textile braid shield is • Designed for use as a trailing cable on AC Compliances:
applied over a non-conducting overlapped tape mining equipment: • ICEA S-75-381 Portable and Power Feeder
- Where maximum safety is mandatory, Cables for use in mines and similar applications
Ground-Check Conductor: including underground mining machines where • Meets flame test requirements and is accepted
• Coated copper, specially stranded to provide induced voltages in an unbalanced grounding for listing by MSHA
extensibility without sustaining tensile load, system could be hazardous • Approved by the Pennsylvania Department of
thereby providing maximum resistance to flex - On low- and medium-voltage AC circuits Environmental Protection
fatigue where shielding is desired or required • Meets CAN/CSA C22.2 No. 96 Portable Power
• Insulated with high-strength polypropylene and Cables and is certified by Natural Resources
placed in the center interstice Features: Canada
• Flexible insulation shield provides shock hazard
Grounding Conductors: protection Packaging:
• Three coated copper, rope-lay-stranded per • Symmetrical grounding system does not • Material cut to length and shipped on non-
ASTM B172 in contact with the flexible braid produce induced voltages when operating in a returnable reels
shield balanced 3-phase system
• Excellent heat, moisture, steam, oil, chemical
Jacket: and radiation resistance
• Reinforced, two-layer, extra-heavy-duty, lead-
cured Chlorinated Polyethylene (CPE)

1 AWG THRU 500 KCMIL CONDUCTORS, THREE CONDUCTOR, SHIELDED ROUND

PORTABLE W/EXTENSIBLE GROUND-CHECK, TYPE SHD-BGC - 2000 VOLTS
NOMINAL NOMINAL NOMINAL COPPER NET
COND. INSULATION GRD. JACKET CABLE WEIGHT WEIGHT
SIZE THICKNESS COND. GRD-CHECK THICKNESS 0.D.
CATALOG NO. OF (AWG/ COND. SIZE COND. SIZE LBS/ kg/ LBS/ kg/
NUMBER COND. kcmil) STRAND INCHES mm (AWG) (AWG) INCHES mm INCHES mm 1000 FT km 1000 FT km AMPACITY

13340.340100.CA 3 1 259 0.080 2.0 7 16 0.190 4.8 1.85 47.0 1196 1780 2450 3645 184
13340.355100.CA 3 1/0 259 0.080 2.0 6 16 0.190 4.8 1.95 49.5 1469 2186 2779 4129 211
13340.645200.CA 3 2/0 329 0.080 2.0 5 16 0.205 5.2 2.09 53.1 1819 2708 3310 4925 243
13340.645300.CA 3 3/0 413 0.080 2.0 4 16 0.205 5.2 2.21 56.1 2237 3330 3950 5877 279
13340.645400.CA 3 4/0 532 0.080 2.0 3 16 0.220 5.6 2.36 59.9 2845 4233 4630 6889 321
13340.646000.CA 3 250 608 0.095 2.4 2 16 0.235 6.0 2.51 63.8 3290 4896 5440 8096 355
13340.646100.CA 3 300 741 0.095 2.4 1 16 0.235 6.0 2.68 68.1 4002 5956 6300 9375 398
13340.646200.CA 3 350 851 0.095 2.4 1 16 0.235 6.4 2.81 71.4 4461 6639 7030 10462 435
13340.646500.CA 3 500 1221 0.095 2.4 2/0 16 0.265 6.7 3.19 81.0 6460 9614 9525 14175 536
Stock items are available in long lengths for cutting to your specifications. All lengths are subject to a tolerance of +/-5%.
Dimensions and weights shown are nominal, subject to standard industry tolerances. Actual shipping weight may vary.
These ampacities are based on a conductor temperature of 90°C and an ambient air temperature of 40°C, per ICEA S-75-381,
NEMA WC58. For ampacities per National Electrical Code® requirements, refer to the latest NEC edition.

13
Mining-Grade Cable Mining

Anaconda Brand Type SHD-GC Power, Shielded Round

®

Portable w/Ground-Check, EPR/CPE 5000 Volts, 90˚C, Three Conductor

Product Construction Jacket: Features (cont’d):

• Reinforced, two-layer, extra-heavy-duty, lead- • Excellent heat, moisture, steam, oil, corona,
Conductor: cured Chlorinated Polyethylene (CPE) chemical and radiation resistance
• 6 AWG thru 500 kcmil coated annealed copper, • Flexible for easy handling
bunched wires, rope-lay-stranded per ASTM Jacket Marking: • High dielectric strength
B172 • GENERAL CABLE® ANACONDA® BRAND • Electrical stability under stress
(SIZE) 3/C TYPE SHD-GC 5000 VOLTS • Low dielectric loss
Extruded Strand Shield (ESS): P-7K-102-046 MSHA • Resists cutting, impact, abrasion, flame and
• Extruded thermosetting semi-conducting stress sunlight
control layer over conductor Options: • Excellent thermal stability and physical
• Colored jackets are available properties over a broad temperature range
Insulation: • TPU (Thermoplastic Polyurethane) jacket • Two-layer jacket is reinforced to provide
• Ethylene Propylene Rubber (EPR) insulation • Anamaxx® jacket maximum protection from mechanical damage—
colored for contrasting with black the cause of most portable cable failures
conducting layer Applications:
• Designed for use as a trailing cable on AC Compliances:
Insulation Shield: mining equipment: • ICEA S-75-381 Portable and Power Feeder
• A flexible coated copper/textile braid - Where service conditions are severe and Cables for use in mines and similar applications
shield is applied over a non-conducting maximum safety is mandatory (such as power • Meets flame test requirements and is accepted
overlapped tape shovels and draglines in open-pit mines, for listing by MSHA
quarries, gantry cranes and slag reclaiming) • Approved by the Pennsylvania Department of
Ground-Check Conductor: - For high-voltage distribution in underground Environmental Protection
• Annealed copper, rope-lay-stranded per ASTM mines where frequent relocation is necessary
B172, insulated with high-strength yellow Packaging:
polypropylene Features: • Material cut to length and shipped on non-
• Simultaneous extrusion and vulcanization of returnable reels
Grounding Conductors: both strand shield and insulation form a virtually
• Coated copper, rope-lay-stranded per perfect electrode, eliminating unequal electrical
ASTM B172 stresses
• Two conductors in contact with the flexible
copper braid shield
6 AWG THRU 500 KCMIL CONDUCTORS, THREE CONDUCTOR,
SHIELDED ROUND PORTABLE W/GROUND-CHECK, TYPE SHD-GC - 5000 VOLTS
NOMINAL NOMINAL NOMINAL COPPER NET
COND. INSULATION GRD. JACKET CABLE WEIGHT WEIGHT
SIZE THICKNESS COND. GRD-CHECK THICKNESS 0.D.
CATALOG NO. OF (AWG/ COND. SIZE COND. SIZE LBS/ kg/ LBS/ kg/
NUMBER COND. kcmil) STRAND INCHES mm (AWG) (AWG) INCHES mm INCHES mm 1000 FT km 1000 FT km AMPACITY

16241.210600 3 6 133 0.110 2.8 10 8 0.185 4.7 1.56 39.6 540 804 1560 2322 93
16204.858221 3 4 259 0.110 2.8 8 8 0.185 4.7 1.68 42.7 720 1072 1895 2820 122
16202.317964 3 2 259 0.110 2.8 6 8 0.205 5.2 1.87 47.9 1030 1533 2445 3639 159
16201.396409 3 1 259 0.110 2.8 5 8 0.205 5.2 1.95 49.5 1248 1857 2800 4167 184
16241.615100 3 1/0 259 0.110 2.8 4 8 0.220 5.6 2.08 52.8 1533 2281 3230 4807 211
16252.271926 3 2/0 329 0.110 2.8 3 8 0.220 5.6 2.20 55.9 1854 2760 3800 5655 243
16241.215300 3 3/0 413 0.110 2.8 2 8 0.235 6.0 2.36 59.9 2322 3456 4475 6660 279
16254.730315 3 4/0 532 0.110 2.8 1 8 0.235 6.0 2.50 63.5 2936 4369 5265 7835 321
16241.216000 3 250 608 0.120 3.0 1/0 6 0.250 6.4 2.69 68.3 3340 4970 6105 9085 355
16241.216300 3 300 741 0.120 3.0 1/0 6 0.250 6.4 2.81 71.4 3962 5897 6875 10231 398
16262.687414 3 350 851 0.120 3.0 2/0 6 0.265 6.7 2.95 74.9 4522 6730 7795 11600 435
16265.570479 3 500 1221 0.120 3.0 4/0 6 0.280 7.1 3.31 84.1 6515 9696 10415 15499 536
Stock items are available in long lengths for cutting to your specifications. All lengths are subject to a tolerance of +/-5%.
Dimensions and weights shown are nominal, subject to standard industry tolerances. Actual shipping weight may vary.
These ampacities are based on a conductor temperature of 90°C and an ambient air temperature of 40°C, per ICEA S-75-381,
NEMA WC58. For ampacities per National Electrical Code® requirements, refer to the latest NEC edition.

14
Mining Mining-Grade Cable

Anaconda Brand Type SHD-GC Power, Shielded Round

®

Portable w/Ground-Check, EPR/CPE 5000 Volts, 90˚C, Three Conductor

Product Construction Jacket: Features (cont’d):

• Reinforced, two-layer, extra-heavy-duty, lead- • Excellent heat, moisture, steam, oil, corona,
Conductor: cured Chlorinated Polyethylene (CPE) chemical and radiation resistance
• 6 AWG thru 500 kcmil coated annealed copper, • Flexible for easy handling
bunched wires, rope-lay-stranded per ASTM Jacket Marking: • High dielectric strength
B172 • GENERAL CABLE® ANACONDA® BRAND (SIZE) • Electrical stability under stress
3/C TYPE SHD-GC 5000 VOLTS (-50C) FT1 FT5 • Low dielectric loss
Extruded Strand Shield (ESS): CSA LR 27161 P-7K-102-046 MSHA • Resists cutting, impact, abrasion, flame and
• Extruded thermosetting semi-conducting stress sunlight
control layer over conductor Options: • Excellent thermal stability and physical
• Colored jackets are available properties over a broad temperature range
Insulation: • TPU (Thermoplastic Polyurethane) jacket • Two-layer jacket is reinforced to provide
• Ethylene Propylene Rubber (EPR) insulation • Anamaxx® jacket maximum protection from mechanical damage—
colored for contrasting with black the cause of most portable cable failures
conducting layer Applications:
• Designed for use as a trailing cable on AC Compliances:
Insulation Shield: mining equipment: • ICEA S-75-381 Portable and Power Feeder
• A flexible coated copper/textile braid - Where service conditions are severe and Cables for use in mines and similar applications
shield is applied over a non-conducting maximum safety is mandatory (such as power • Meets flame test requirements and is accepted
overlapped tape shovels and draglines in open-pit mines, for listing by MSHA
quarries, gantry cranes and slag reclaiming) • Approved by the Pennsylvania Department of
Ground-Check Conductor: - For high-voltage distribution in underground Environmental Protection
• Annealed copper, rope-lay-stranded per ASTM mines where frequent relocation is necessary • Meets CAN/CSA C22.2 No. 96 Portable Power
B172, insulated with high-strength yellow Cables and is certified by Natural Resources
polypropylene Features: Canada
• Simultaneous extrusion and vulcanization of
Grounding Conductors: both strand shield and insulation form a virtually Packaging:
• Coated copper, rope-lay-stranded per perfect electrode, eliminating unequal electrical • Material cut to length and shipped on non-
ASTM B172 stresses returnable reels
• Two conductors in contact with the flexible
copper braid shield
6 AWG THRU 500 KCMIL CONDUCTORS, THREE CONDUCTOR,
SHIELDED ROUND PORTABLE W/GROUND-CHECK, TYPE SHD-GC - 5000 VOLTS
NOMINAL NOMINAL NOMINAL COPPER NET
COND. INSULATION GRD. JACKET CABLE WEIGHT WEIGHT
SIZE THICKNESS COND. GRD-CHECK THICKNESS 0.D.
CATALOG NO. OF (AWG/ COND. SIZE COND. SIZE LBS/ kg/ LBS/ kg/
NUMBER COND. kcmil) STRAND INCHES mm (AWG) (AWG) INCHES mm INCHES mm 1000 FT km 1000 FT km AMPACITY

16241.210600.CA 3 6 133 0.110 2.8 10 8 0.185 4.7 1.56 39.6 540 804 1560 2322 93
16204.858221.CA 3 4 259 0.110 2.8 8 8 0.185 4.7 1.68 42.7 720 1072 1895 2820 122
16202.317964.CA 3 2 259 0.110 2.8 6 8 0.205 5.2 1.87 47.9 1030 1533 2445 3639 159
16201.396409.CA 3 1 259 0.110 2.8 5 8 0.205 5.2 1.95 49.5 1248 1857 2800 4167 184
16241.615100.CA 3 1/0 259 0.110 2.8 4 8 0.220 5.6 2.08 52.8 1533 2281 3230 4807 211
16252.271926.CA 3 2/0 329 0.110 2.8 3 8 0.220 5.6 2.20 55.9 1854 2760 3800 5655 243
16241.215300.CA 3 3/0 413 0.110 2.8 2 8 0.235 6.0 2.36 59.9 2322 3456 4475 6660 279
16254.730315.CA 3 4/0 532 0.110 2.8 1 8 0.235 6.0 2.50 63.5 2936 4369 5265 7835 321
16241.216000.CA 3 250 608 0.120 3.0 1/0 6 0.250 6.4 2.69 68.3 3340 4970 6105 9085 355
16241.216300.CA 3 300 741 0.120 3.0 1/0 6 0.250 6.4 2.81 71.4 3962 5897 6875 10231 398
16262.687414.CA 3 350 851 0.120 3.0 2/0 6 0.265 6.7 2.95 74.9 4522 6730 7795 11600 435
16265.570479.CA 3 500 1221 0.120 3.0 4/0 6 0.280 7.1 3.31 84.1 6515 9696 10415 15499 536
Stock items are available in long lengths for cutting to your specifications. All lengths are subject to a tolerance of +/-5%.
Dimensions and weights shown are nominal, subject to standard industry tolerances. Actual shipping weight may vary.
These ampacities are based on a conductor temperature of 90°C and an ambient air temperature of 40°C, per ICEA S-75-381,
NEMA WC58. For ampacities per National Electrical Code® requirements, refer to the latest NEC edition.

15
Mining-Grade Cable Mining

Anaconda Brand Type SHD-CGC Power, Shielded Round

®

Portable w/Extensible Ground-Check, EPR/CPE

5000 Volts, 90˚C, Three Conductor

Product Construction Jacket: Features (cont’d):

• Reinforced, two-layer, extra-heavy-duty, lead- • Excellent heat, moisture, steam, oil, chemical
Conductor: cured Chlorinated Polyethylene (CPE) and radiation resistance
• 1 AWG thru 500 kcmil coated annealed copper, • Flexible for easy handling
bunched wires, rope-lay-stranded per ASTM B172 Jacket Marking: • Resists cutting, impact, abrasion, flame
• GENERAL CABLE® ANACONDA® BRAND and sunlight
Extruded Strand Shield (ESS): (SIZE) 3/C TYPE SHD-CGC 5000 VOLTS • Excellent thermal stability and physical
• Extruded thermosetting semi-conducting stress P-7K-102-046 MSHA properties over a broad temperature range
control layer over conductor • Two-layer jacket is reinforced to provide
Options: maximum protection from mechanical
Insulation: • Colored jackets are available damage—the cause of most portable
• Ethylene Propylene Rubber (EPR) insulation • TPU (Thermoplastic Polyurethane) jacket cable failures
colored for contrasting with black • Anamaxx® jacket
conducting layer Compliances:
Applications: • ICEA S-75-381 Portable and Power Feeder
Insulation Shield: • Designed for use as a trailing cable on AC Cables for use in mines and similar applications
• A flexible coated copper/textile braid shield is mining equipment: • Meets flame test requirements and is accepted
applied over a non-conducting overlapped tape - Where maximum safety is mandatory, for listing by MSHA
including underground mining machines where • Approved by the Pennsylvania Department of
Ground-Check Conductor: induced voltages in an unbalanced grounding Environmental Protection
• Coated copper, specially stranded to provide system could be hazardous
extensibility without sustaining tensile load, - On low- and medium-voltage AC circuits Packaging:
thereby providing maximum resistance to flex where shielding is desired or required • Material cut to length and shipped on non-
fatigue returnable reels
• Insulated with high-strength polypropylene and Features:
placed in the center interstice • Flexible insulation shield provides shock hazard
protection
Grounding Conductors: • Symmetrical grounding system does not
• Three coated copper, rope-lay-stranded per produce induced voltages when operating in a
ASTM B172 in contact with the flexible braid balanced 3-phase system
shield

1 AWG THRU 500 KCMIL CONDUCTORS, THREE CONDUCTOR, SHIELDED ROUND

PORTABLE W/EXTENSIBLE GROUND-CHECK, TYPE SHD-CGC - 5000 VOLTS
NOMINAL NOMINAL NOMINAL COPPER NET
COND. INSULATION GRD. JACKET CABLE WEIGHT WEIGHT
SIZE THICKNESS COND. GRD-CHECK THICKNESS 0.D.
CATALOG NO. OF (AWG/ COND. SIZE COND. SIZE LBS/ kg/ LBS/ kg/
NUMBER COND. kcmil) STRAND INCHES mm (AWG) (AWG) INCHES mm INCHES mm 1000 FT km 1000 FT km AMPACITY

16299.060100 3 1 259 0.110 2.8 7 16 0.205 5.2 1.98 50.29 1211 1802 2843 4231 184
16299.065100 3 1/0 259 0.110 2.8 6 16 0.220 5.6 2.10 53.34 1473 2192 3319 4939 211
16252.530102 3 2/0 329 0.110 2.8 5 16 0.220 5.6 2.20 55.88 1879 2796 3965 5900 243
16299.065300 3 3/0 413 0.110 2.8 4 16 0.235 6.0 2.36 59.94 2279 3391 4729 7037 279
16299.065400 3 4/0 532 0.110 2.8 3 16 0.235 6.0 2.50 63.50 2838 4223 5626 8372 321
16299.066000 3 250 608 0.120 3.0 2 16 0.250 6.4 2.69 68.33 3406 5068 6488 9655 355
16299.066100 3 300 741 0.120 3.0 1 16 0.250 6.4 2.81 71.37 3698 5503 7141 10627 398
16299.066200 3 350 851 0.120 3.0 1 16 0.265 6.7 2.95 74.93 4287 6379 8061 11996 435
16299.066500 3 500 1221 0.120 3.0 2/0 16 0.280 7.1 3.31 84.07 6500 9673 11514 17134 536
Stock items are available in long lengths for cutting to your specifications. All lengths are subject to a tolerance of +/-5%.
Dimensions and weights shown are nominal, subject to standard industry tolerances. Actual shipping weight may vary.
These ampacities are based on a conductor temperature of 90°C and an ambient air temperature of 40°C, per ICEA S-75-381,
NEMA WC58. For ampacities per National Electrical Code® requirements, refer to the latest NEC edition.

16
Mining Mining-Grade Cable

Anaconda Brand Type SHD-BGC Power, Shielded Round

®

Portable w/Extensible Ground-Check, EPR/CPE

5000 Volts, 90˚C, Three Conductor

Product Construction Jacket: Features (cont’d):

• Reinforced, two-layer, extra-heavy-duty, lead- • Excellent heat, moisture, steam, oil, chemical
Conductor: cured Chlorinated Polyethylene (CPE) and radiation resistance
• 1 AWG thru 500 kcmil coated annealed copper, • Flexible for easy handling
bunched wires, rope-lay-stranded per ASTM B172 Jacket Marking: • Resists cutting, impact, abrasion, flame
• GENERAL CABLE® ANACONDA® BRAND (SIZE) and sunlight
Extruded Strand Shield (ESS): 3/C TYPE SHD-BGC 5000 VOLTS (-50C) • Excellent thermal stability and physical
• Extruded thermosetting semi-conducting stress FT1 FT5 CSA LR 27161 P-7K-102-046 MSHA properties over a broad temperature range
control layer over conductor • Two-layer jacket is reinforced to provide
Options: maximum protection from mechanical
Insulation: • Colored jackets are available damage—the cause of most portable
• Ethylene Propylene Rubber (EPR) insulation • TPU (Thermoplastic Polyurethane) jacket cable failures
colored for contrasting with black • Anamaxx® jacket
conducting layer Compliances:
Applications: • ICEA S-75-381 Portable and Power Feeder
Insulation Shield: • Designed for use as a trailing cable on AC Cables for use in mines and similar applications
• A flexible coated copper/textile braid shield is mining equipment: • Meets flame test requirements and is accepted
applied over a non-conducting overlapped tape - Where maximum safety is mandatory, for listing by MSHA
including underground mining machines where • Approved by the Pennsylvania Department of
Ground-Check Conductor: induced voltages in an unbalanced grounding Environmental Protection
• Coated copper, specially stranded to provide system could be hazardous • Meets CAN/CSA C22.2 No. 96 Portable Power
extensibility without sustaining tensile load, - On low- and medium-voltage AC circuits Cables and is certified by Natural Resources
thereby providing maximum resistance to flex where shielding is desired or required Canada
fatigue
• Insulated with high-strength polypropylene and Features: Packaging:
placed in the center interstice • Flexible insulation shield provides shock hazard • Material cut to length and shipped on non-
protection returnable reels
Grounding Conductors: • Symmetrical grounding system does not
• Three coated copper, rope-lay-stranded per produce induced voltages when operating in a
ASTM B172 in contact with the flexible braid balanced 3-phase system
shield

1 AWG THRU 500 KCMIL CONDUCTORS, THREE CONDUCTOR, SHIELDED ROUND

PORTABLE W/EXTENSIBLE GROUND-CHECK, TYPE SHD-BGC - 5000 VOLTS
NOMINAL NOMINAL NOMINAL COPPER NET
COND. INSULATION GRD. JACKET CABLE WEIGHT WEIGHT
SIZE THICKNESS COND. GRD-CHECK THICKNESS 0.D.
CATALOG NO. OF (AWG/ COND. SIZE COND. SIZE LBS/ kg/ LBS/ kg/
NUMBER COND. kcmil) STRAND INCHES mm (AWG) (AWG) INCHES mm INCHES mm 1000 FT km 1000 FT km AMPACITY

16299.060100.CA 3 1 259 0.110 2.8 7 16 0.205 5.2 1.98 50.29 1211 1802 2843 4231 184
16299.065100.CA 3 1/0 259 0.110 2.8 6 16 0.220 5.6 2.10 53.34 1473 2192 3319 4939 211
16252.530102.CA 3 2/0 329 0.110 2.8 5 16 0.220 5.6 2.20 55.88 1879 2796 3965 5900 243
16299.065300.CA 3 3/0 413 0.110 2.8 4 16 0.235 6.0 2.36 59.94 2279 3391 4729 7037 279
16299.065400.CA 3 4/0 532 0.110 2.8 3 16 0.235 6.0 2.50 63.50 2838 4223 5626 8372 321
16299.066000.CA 3 250 608 0.120 3.0 2 16 0.250 6.4 2.69 68.33 3406 5068 6488 9655 355
16299.066100.CA 3 300 741 0.120 3.0 1 16 0.250 6.4 2.81 71.37 3698 5503 7141 10627 398
16299.066200.CA 3 350 851 0.120 3.0 1 16 0.265 6.7 2.95 74.93 4287 6379 8061 11996 435
16299.066500.CA 3 500 1221 0.120 3.0 2/0 16 0.280 7.1 3.31 84.07 6500 9673 11514 17134 536
Stock items are available in long lengths for cutting to your specifications. All lengths are subject to a tolerance of +/-5%.
Dimensions and weights shown are nominal, subject to standard industry tolerances. Actual shipping weight may vary.
These ampacities are based on a conductor temperature of 90°C and an ambient air temperature of 40°C, per ICEA S-75-381,
NEMA WC58. For ampacities per National Electrical Code® requirements, refer to the latest NEC edition.

17
Mining-Grade Cable Mining

Anaconda Brand Type SHD-GC Power, Shielded Round

®

Portable w/Ground-Check, EPR/CPE 8000 Volts, 90˚C, Three Conductor

Product Construction Jacket: Features (cont’d):

• Reinforced, two-layer, extra-heavy-duty, lead- • Excellent heat, moisture, steam, oil, corona,
Conductor: cured Chlorinated Polyethylene (CPE) chemical and radiation resistance
• 4 AWG thru 500 kcmil coated annealed copper, • Flexible for easy handling
bunched wires, rope-lay-stranded per ASTM Jacket Marking: • High dielectric strength
B172 • GENERAL CABLE® ANACONDA® BRAND • Electrical stability under stress
(SIZE) 3/C TYPE SHD-GC 8000 VOLTS • Low dielectric loss
Extruded Strand Shield (ESS): P-7K-102-046 MSHA • Resists cutting, impact, abrasion, flame
• Extruded thermosetting semi-conducting stress and sunlight
control layer over conductor Options: • Excellent thermal stability and physical
• Colored jackets are available properties over a broad temperature range
Insulation: • TPU (Thermoplastic Polyurethane) jacket • Two-layer jacket is reinforced to provide
• Ethylene Propylene Rubber (EPR) insulation • Anamaxx® jacket maximum protection from mechanical
colored for contrast with black conducting layer damage—the cause of most portable
Applications: cable failures
Insulation Shield: • Designed for use as a trailing cable on AC
• A flexible coated copper/textile braid shield is mining equipment: Compliances:
applied over a conducting overlapped tape - Where service conditions are severe and • ICEA S-75-381 Portable and Power Feeder
maximum safety is mandatory (such as power Cables for use in mines and similar applications
Ground-Check Conductor: shovels and draglines in open-pit mines, • Meets flame test requirements and is accepted
• Annealed copper, rope-lay-stranded per ASTM quarries, gantry cranes and slag reclaiming) for listing by MSHA
B172, insulated with high-strength yellow - For high-voltage distribution in underground • Approved by the Pennsylvania Department of
polypropylene mines where frequent relocation is necessary Environmental Protection

Grounding Conductors: Features: Packaging:

• Coated copper, rope-lay-stranded per • Simultaneous extrusion and vulcanization of • Material cut to length and shipped on non-
ASTM B172 both strand shield and insulation form a virtually returnable reels
• Two conductors in contact with the flexible perfect electrode, eliminating unequal electrical
copper braid shield stresses

4 AWG THRU 500 KCMIL CONDUCTORS, THREE CONDUCTOR, SHIELDED ROUND

PORTABLE W/GROUND-CHECK, TYPE SHD-GC - 8000 VOLTS
NOMINAL NOMINAL NOMINAL COPPER NET
COND. INSULATION GRD. JACKET CABLE WEIGHT WEIGHT
SIZE THICKNESS COND. GRD-CHECK THICKNESS 0.D.
CATALOG NO. OF (AWG/ COND. SIZE COND. SIZE LBS/ kg/ LBS/ kg/
NUMBER COND. kcmil) STRAND INCHES mm (AWG) (AWG) INCHES mm INCHES mm 1000 FT km 1000 FT km AMPACITY

16243.310400 3 4 259 0.150 3.8 8 8 0.205 5.2 1.94 49.3 764 1138 2308 3594 122
16243.310200 3 2 259 0.150 3.8 6 8 0.220 5.6 2.12 53.8 1064 1583 2920 4554 159
16243.310100 3 1 259 0.150 3.8 5 8 0.220 5.6 2.21 56.1 1287 1915 3292 5104 184
16243.615100 3 1/0 259 0.150 3.8 4 8 0.220 5.6 2.32 58.9 1553 2311 3675 5700 211
16252.201837 3 2/0 329 0.150 3.8 3 8 0.235 6.0 2.46 62.5 1896 2822 4304 6593 243
16243.615300 3 3/0 413 0.150 3.8 2 8 0.250 6.4 2.62 66.5 2329 3466 5200 7738 279
16254.709412 3 4/0 532 0.150 3.8 1 8 0.250 6.4 2.75 69.8 2889 4299 5840 8713 321
16243.616000 3 250 608 0.150 3.8 1/0 6 0.250 6.4 2.89 73.4 3434 5111 6774 9948 355
16243.616100 3 300 741 0.150 3.8 1/0 6 0.265 6.7 3.04 77.2 3975 5915 7423 11384 398
16243.616200 3 350 851 0.150 3.8 2/0 6 0.280 7.1 3.21 81.3 4522 6730 8543 12739 435
16243.616500 3 500 1221 0.150 3.8 4/0 6 0.295 7.5 3.56 90.4 6566 9771 11260 16757 536
Stock items are available in long lengths for cutting to your specifications. All lengths are subject to a tolerance of +/-5%.
Dimensions and weights shown are nominal, subject to standard industry tolerances. Actual shipping weight may vary.
These ampacities are based on a conductor temperature of 90°C and an ambient air temperature of 40°C, per ICEA S-75-381,
NEMA WC58. For ampacities per National Electrical Code® requirements, refer to the latest NEC edition.

18
Mining Mining-Grade Cable

Anaconda Brand Type SHD-GC Power, Shielded Round

®

Portable w/Ground-Check, EPR/CPE 8000 Volts, 90˚C, Three Conductor

Product Construction Jacket: Features (cont’d):

• Reinforced, two-layer, extra-heavy-duty, lead- • Excellent heat, moisture, steam, oil, corona,
Conductor: cured Chlorinated Polyethylene (CPE) chemical and radiation resistance
• 4 AWG thru 500 kcmil coated annealed copper, • Flexible for easy handling
bunched wires, rope-lay-stranded per ASTM Jacket Marking: • High dielectric strength
B172 • GENERAL CABLE® ANACONDA® BRAND (SIZE) • Electrical stability under stress
3/C TYPE SHD-GC 8000 VOLTS (-50C) FT1 FT5 • Low dielectric loss
Extruded Strand Shield (ESS): CSA LR 27161 P-7K-102-046 MSHA • Resists cutting, impact, abrasion, flame
• Extruded thermosetting semi-conducting stress and sunlight
control layer over conductor Options: • Excellent thermal stability and physical
• Colored jackets are available properties over a broad temperature range
Insulation: • TPU (Thermoplastic Polyurethane) jacket • Two-layer jacket is reinforced to provide
• Ethylene Propylene Rubber (EPR) insulation • Anamaxx® jacket maximum protection from mechanical
colored for contrast with black conducting layer damage—the cause of most portable
Applications: cable failures
Insulation Shield: • Designed for use as a trailing cable on AC
• A flexible coated copper/textile braid shield is mining equipment: Compliances:
applied over a conducting overlapped tape - Where service conditions are severe and • ICEA S-75-381 Portable and Power Feeder
maximum safety is mandatory (such as power Cables for use in mines and similar applications
Ground-Check Conductor: shovels and draglines in open-pit mines, • Meets flame test requirements and is accepted
• Annealed copper, rope-lay-stranded per ASTM quarries, gantry cranes and slag reclaiming) for listing by MSHA
B172, insulated with high-strength yellow - For high-voltage distribution in underground • Approved by the Pennsylvania Department of
polypropylene mines where frequent relocation is necessary Environmental Protection
• Meets CAN/CSA C22.2 No. 96 Portable Power
Grounding Conductors: Features: Cables and is certified by Natural Resources
• Coated copper, rope-lay-stranded per • Simultaneous extrusion and vulcanization of Canada
ASTM B172 both strand shield and insulation form a virtually
• Two conductors in contact with the flexible perfect electrode, eliminating unequal electrical Packaging:
copper braid shield stresses • Material cut to length and shipped on non-
returnable reels

4 AWG THRU 500 KCMIL CONDUCTORS, THREE CONDUCTOR, SHIELDED ROUND

PORTABLE W/GROUND-CHECK, TYPE SHD-GC - 8000 VOLTS
NOMINAL NOMINAL NOMINAL COPPER NET
COND. INSULATION GRD. JACKET CABLE WEIGHT WEIGHT
SIZE THICKNESS COND. GRD-CHECK THICKNESS 0.D.
CATALOG NO. OF (AWG/ COND. SIZE COND. SIZE LBS/ kg/ LBS/ kg/
NUMBER COND. kcmil) STRAND INCHES mm (AWG) (AWG) INCHES mm INCHES mm 1000 FT km 1000 FT km AMPACITY

16243.310400.CA 3 4 259 0.150 3.8 8 8 0.205 5.2 1.94 49.3 764 1138 2308 3594 122
16243.310200.CA 3 2 259 0.150 3.8 6 8 0.220 5.6 2.12 53.8 1064 1583 2920 4554 159
16243.310100.CA 3 1 259 0.150 3.8 5 8 0.220 5.6 2.21 56.1 1287 1915 3292 5104 184
16243.615100.CA 3 1/0 259 0.150 3.8 4 8 0.220 5.6 2.32 58.9 1553 2311 3675 5700 211
16252.201837.CA 3 2/0 329 0.150 3.8 3 8 0.235 6.0 2.46 62.5 1896 2822 4304 6593 243
16243.615300.CA 3 3/0 413 0.150 3.8 2 8 0.250 6.4 2.62 66.5 2329 3466 5200 7738 279
16254.709412.CA 3 4/0 532 0.150 3.8 1 8 0.250 6.4 2.75 69.8 2889 4299 5840 8713 321
16243.616000.CA 3 250 608 0.150 3.8 1/0 6 0.250 6.4 2.89 73.4 3434 5111 6774 9948 355
16243.616100.CA 3 300 741 0.150 3.8 1/0 6 0.265 6.7 3.04 77.2 3975 5915 7423 11384 398
16243.616200.CA 3 350 851 0.150 3.8 2/0 6 0.280 7.1 3.21 81.3 4522 6730 8543 12739 435
16243.616500.CA 3 500 1221 0.150 3.8 4/0 6 0.295 7.5 3.56 90.4 6566 9771 11260 16757 536
Stock items are available in long lengths for cutting to your specifications. All lengths are subject to a tolerance of +/-5%.
Dimensions and weights shown are nominal, subject to standard industry tolerances. Actual shipping weight may vary.
These ampacities are based on a conductor temperature of 90°C and an ambient air temperature of 40°C, per ICEA S-75-381,
NEMA WC58. For ampacities per National Electrical Code® requirements, refer to the latest NEC edition.

19
Mining-Grade Cable Mining

Anaconda Brand Type SHD-GC Power, Shielded Round

®

Portable w/Ground-Check, EPR/CPE 15000 Volts, 90˚C, Three Conductor

Product Construction Jacket: Features (cont’d):

• Reinforced, two-layer, extra-heavy-duty, • Excellent heat, moisture, steam, oil, corona,
Conductor: lead-cured Chlorinated Polyethylene (CPE) chemical and radiation resistance
• 2 AWG thru 500 kcmil coated annealed copper, • Flexible for easy handling
bunched wires, rope-lay-stranded per ASTM Jacket Marking: • High dielectric strength
B172 • GENERAL CABLE® ANACONDA® BRAND • Electrical stability under stress
(SIZE) 3/C TYPE SHD-GC 15000 VOLTS • Low dielectric loss
Extruded Strand Shield (ESS): P-7K-102-046 MSHA • Resists cutting, impact, abrasion, flame
• Extruded thermosetting semi-conducting stress and sunlight
control layer over conductor Options: • Excellent thermal stability and physical
• Colored jackets are available properties over a broad temperature range
Insulation: • TPU (Thermoplastic Polyurethane) jacket • Two-layer jacket is reinforced to provide
• Ethylene Propylene Rubber (EPR) insulation • Anamaxx® jacket maximum protection from mechanical damage—
colored for contrast with black conducting layer the cause of most portable cable failures
Applications:
Insulation Shield: • Designed for use as a trailing cable on AC Compliances:
• A flexible coated copper/textile braid shield is mining equipment: • ICEA S-75-381 Portable and Power Feeder
applied over a conducting overlapped tape - Where service conditions are severe and Cables for use in mines and similar applications
maximum safety is mandatory (such as power • Meets flame test requirements and is accepted
Ground-Check Conductor: shovels and draglines in open-pit mines, for listing by MSHA
• Annealed copper, rope-lay-stranded per ASTM quarries,gantry cranes and slag reclaiming) • Approved by the Pennsylvania Department of
B172, insulated with high-strength yellow - For high-voltage distribution in underground Environmental Protection
polypropylene mines where frequent relocation is necessary
Packaging:
Grounding Conductors: Features: • Material cut to length and shipped on non-
• Coated copper, rope-lay-stranded per • Simultaneous extrusion and vulcanization of returnable reels
ASTM B172 both strand shield and insulation form a virtually
• Two conductors in contact with the flexible perfect electrode, eliminating unequal electrical
copper braid shield stresses

2 AWG THRU 500 KCMIL CONDUCTORS, THREE CONDUCTOR, SHIELDED

ROUND PORTABLE W/GROUND-CHECK, TYPE SHD-GC - 15000 VOLTS
NOMINAL NOMINAL NOMINAL COPPER NET
COND. INSULATION GRD. JACKET CABLE WEIGHT WEIGHT
SIZE THICKNESS COND. GRD-CHECK THICKNESS 0.D.
CATALOG NO. OF (AWG/ COND. SIZE COND. SIZE LBS/ kg/ LBS/ kg/
NUMBER COND. kcmil) STRAND INCHES mm (AWG) (AWG) INCHES mm INCHES mm 1000 FT km 1000 FT km AMPACITY

16245.310200 3 2 259 0.210 5.3 6 8 0.235 6.0 2.41 61.2 870 1295 3572 5529 164
16245.310100 3 1 259 0.210 5.3 5 8 0.235 6.0 2.52 64.0 1307 1946 4060 6042 187
16245.315100 3 1/0 259 0.210 5.3 4 8 0.250 6.4 2.64 67.0 1574 2342 4495 6927 215
16299.625200 3 2/0 329 0.210 5.3 3 8 0.250 6.4 2.73 69.3 1930 2872 5010 7783 246
16245.615300 3 3/0 413 0.210 5.3 2 8 0.265 6.7 2.90 73.7 2359 3511 5995 8922 283
16245.615400 3 4/0 532 0.210 5.3 1 8 0.265 6.7 3.05 77.5 2973 4425 6860 10209 325
16245.616000 3 250 608 0.210 5.3 1/0 6 0.265 6.7 3.10 78.74 3447 5129 7492 11149 359
16245.616200 3 350 851 0.210 5.3 2/0 6 0.280 7.1 3.39 85.98 4522 6731 8866 13194 437
16245.616500 3 500 1221 0.210 5.3 4/0 6 0.280 7.1 3.65 92.71 6706 9979 11735 17463 534
Stock items are available in long lengths for cutting to your specifications. All lengths are subject to a tolerance of +/-5%.
Dimensions and weights shown are nominal, subject to standard industry tolerances. Actual shipping weight may vary.
These ampacities are based on a conductor temperature of 90°C and an ambient air temperature of 40°C, per ICEA S-75-381,
NEMA WC58. For ampacities per National Electrical Code® requirements, refer to the latest NEC edition.

20
Mining Mining-Grade Cable

Anaconda Brand Type SHD-GC Power, Shielded Round

®

Portable w/Ground-Check, EPR/CPE 15000 Volts, 90˚C, Three Conductor

Product Construction Jacket: Features (cont’d):

• Reinforced, two-layer, extra-heavy-duty, • Excellent heat, moisture, steam, oil, corona,
Conductor: lead-cured Chlorinated Polyethylene (CPE) chemical and radiation resistance
• 2 AWG thru 500 kcmil coated annealed copper, • Flexible for easy handling
bunched wires, rope-lay-stranded per ASTM Jacket Marking: • High dielectric strength
B172 • GENERAL CABLE® ANACONDA® BRAND (SIZE) • Electrical stability under stress
3/C TYPE SHD-GC 15000 VOLTS (-50C) FT1 • Low dielectric loss
Extruded Strand Shield (ESS): FT5 CSA LR 27161 P-7K-102-046 MSHA • Resists cutting, impact, abrasion, flame
• Extruded thermosetting semi-conducting stress and sunlight
control layer over conductor Options: • Excellent thermal stability and physical
• Colored jackets are available properties over a broad temperature range
Insulation: • TPU (Thermoplastic Polyurethane) jacket • Two-layer jacket is reinforced to provide
• Ethylene Propylene Rubber (EPR) insulation • Anamaxx® jacket maximum protection from mechanical damage—
colored for contrast with black conducting layer the cause of most portable cable failures
Applications:
Insulation Shield: • Designed for use as a trailing cable on AC Compliances:
• A flexible coated copper/textile braid shield is mining equipment: • ICEA S-75-381 Portable and Power Feeder
applied over a conducting overlapped tape - Where service conditions are severe and Cables for use in mines and similar applications
maximum safety is mandatory (such as power • Meets flame test requirements and is accepted
Ground-Check Conductor: shovels and draglines in open-pit mines, for listing by MSHA
• Annealed copper, rope-lay-stranded per ASTM quarries,gantry cranes and slag reclaiming) • Approved by the Pennsylvania Department of
B172, insulated with high-strength yellow - For high-voltage distribution in underground Environmental Protection
polypropylene mines where frequent relocation is necessary • Meets CAN/CSA C22.2 No. 96 Portable Power
Cables and is certified by Natural Resources
Grounding Conductors: Features: Canada
• Coated copper, rope-lay-stranded per • Simultaneous extrusion and vulcanization of
ASTM B172 both strand shield and insulation form a virtually Packaging:
• Two conductors in contact with the flexible perfect electrode, eliminating unequal electrical • Material cut to length and shipped on non-
copper braid shield stresses returnable reels

2 AWG THRU 500 KCMIL CONDUCTORS, THREE CONDUCTOR, SHIELDED

ROUND PORTABLE W/GROUND-CHECK, TYPE SHD-GC - 15000 VOLTS
NOMINAL NOMINAL NOMINAL COPPER NET
COND. INSULATION GRD. JACKET CABLE WEIGHT WEIGHT
SIZE THICKNESS COND. GRD-CHECK THICKNESS 0.D.
CATALOG NO. OF (AWG/ COND. SIZE COND. SIZE LBS/ kg/ LBS/ kg/
NUMBER COND. kcmil) STRAND INCHES mm (AWG) (AWG) INCHES mm INCHES mm 1000 FT km 1000 FT km AMPACITY

16245.310200.CA 3 2 259 0.210 5.3 6 8 0.235 6.0 2.41 61.2 870 1295 3572 5529 164
16245.310100.CA 3 1 259 0.210 5.3 5 8 0.235 6.0 2.52 64.0 1307 1946 4060 6042 187
16245.315100.CA 3 1/0 259 0.210 5.3 4 8 0.250 6.4 2.64 67.0 1574 2342 4495 6927 215
16299.625200.CA 3 2/0 329 0.210 5.3 3 8 0.250 6.4 2.73 69.3 1930 2872 5010 7783 246
16245.615300.CA 3 3/0 413 0.210 5.3 2 8 0.265 6.7 2.90 73.7 2359 3511 5995 8922 283
16245.615400.CA 3 4/0 532 0.210 5.3 1 8 0.265 6.7 3.05 77.5 2973 4425 6860 10209 325
16245.616000.CA 3 250 608 0.210 5.3 1/0 6 0.265 6.7 3.10 78.74 3447 5129 7492 11149 359
16245.616200.CA 3 350 851 0.210 5.3 2/0 6 0.280 7.1 3.39 85.98 4522 6731 8866 13194 437
16245.616500.CA 3 500 1221 0.210 5.3 4/0 6 0.280 7.1 3.65 92.71 6706 9979 11735 17463 534
Stock items are available in long lengths for cutting to your specifications. All lengths are subject to a tolerance of +/-5%.
Dimensions and weights shown are nominal, subject to standard industry tolerances. Actual shipping weight may vary.
These ampacities are based on a conductor temperature of 90°C and an ambient air temperature of 40°C, per ICEA S-75-381,
NEMA WC58. For ampacities per National Electrical Code® requirements, refer to the latest NEC edition.

21
Mining-Grade Cable Mining

Anaconda Brand Type SHD-GC Power, Shielded Round

®

Portable w/Ground-Check, EPR/CPE 25000 Volts, 90˚C, Three Conductor

Product Construction Jacket: Features (cont’d):

• Reinforced, two-layer, extra-heavy-duty, lead- • Flexible for easy handling
Conductor: cured Chlorinated Polyethylene (CPE) • High dielectric strength
• 1 AWG thru 350 kcmil coated annealed copper, • Electrical stability under stress
bunched wires, rope-lay-stranded per ASTM Jacket Marking: • Low dielectric loss
B172 • GENERAL CABLE® ANACONDA® BRAND • Resists cutting, impact, abrasion, flame
(SIZE) 3/C TYPE SHD-GC 25000 VOLTS and sunlight
Extruded Strand Shield (ESS): P-7K-102-046 MSHA • Excellent thermal stability and physical
• Extruded thermosetting semi-conducting stress properties over a broad temperature range
control layer over conductor Options: • Two-layer jacket is reinforced to provide
• Colored jackets are available maximum protection from mechanical
Insulation: • TPU (Thermoplastic Polyurethane) jacket damage—the cause of most portable
• Ethylene Propylene Rubber (EPR) insulation • Anamaxx® jacket cable failures
colored for contrast with black conducting layers
Applications: Compliances:
Insulation Shield: • Designed for use as a trailing cable on AC • ICEA S-75-381 Portable and Power Feeder
• An extruded conducting layer covered by a mining equipment: Cables for use in mines and similar applications
conducting tape, and a flexible coated copper/ - Where service conditions are severe and • Meets flame test requirements and is accepted
textile braid shield overall provides greater maximum safety is mandatory (such as power for listing by MSHA
mechanical protection than an equal thickness shovels and draglines in open-pit mines, • Approved by the Pennsylvania Department of
of insulation quarries, gantry cranes and slag reclaiming) Environmental Protection
- For high-voltage distribution in underground
Ground-Check Conductor: mines where frequent relocation is necessary Packaging:
• Annealed copper, rope-lay-stranded per ASTM • Material cut to length and shipped on non-
B172, insulated with high-strength yellow Features: returnable reels
polypropylene • Simultaneous extrusion and vulcanization of the
strand shield, insulation and insulation shield
Grounding Conductors: form a virtually perfect electrode, eliminating
• Coated copper, rope-lay-stranded per ASTM unequal electrical stresses
B172 • Excellent heat, moisture, steam, oil, corona,
• Two conductors in contact with the flexible chemical and radiation resistance
copper braid shield

1 AWG THRU 350 KCMIL CONDUCTORS, THREE CONDUCTOR,

SHIELDED ROUND PORTABLE W/GROUND-CHECK, TYPE SHD-GC - 25000 VOLTS
NOMINAL NOMINAL NOMINAL COPPER NET
COND. INSULATION GRD. JACKET CABLE WEIGHT WEIGHT
SIZE THICKNESS COND. GRD-CHECK THICKNESS 0.D.
CATALOG NO. OF (AWG/ COND. SIZE COND. SIZE LBS/ kg/ LBS/ kg/
NUMBER COND. kcmil) STRAND INCHES mm (AWG) (AWG) INCHES mm INCHES mm 1000 FT km 1000 FT km AMPACITY

16247.310100 3 1 259 0.260 6.6 5 8 0.265 6.7 2.95 74.93 1306 1943 5290 7872 191
16247.315100 3 1/0 259 0.260 6.6 4 8 0.265 6.7 3.05 77.47 1556 2315 5800 8631 218
16247.315200 3 2/0 329 0.260 6.6 3 8 0.280 7.1 3.20 81.28 1888 2810 6515 9695 249
16247.615300 3 3/0 413 0.260 6.6 2 8 0.280 7.1 3.33 84.58 2303 3428 7215 10737 286
16247.615400 3 4/0 532 0.260 6.6 1 8 0.295 7.5 3.50 88.90 2889 4300 8250 12277 327
16247.616000 3 250 608 0.260 6.6 1/0 6 0.295 7.5 3.54 89.92 3486 5188 9066 13491 360
16247.956200 3 350 851 0.260 6.6 2/0 6 0.295 7.5 3.79 96.37 4579 6815 10118 15057 439
Stock items are available in long lengths for cutting to your specifications. All lengths are subject to a tolerance of +/-5%.
Dimensions and weights shown are nominal, subject to standard industry tolerances. Actual shipping weight may vary.
These ampacities are based on a conductor temperature of 90°C and an ambient air temperature of 40°C, per ICEA S-75-381,
NEMA WC58. For ampacities per National Electrical Code® requirements, refer to the latest NEC edition.

22
Mining Mining-Grade Cable

Anaconda Brand Type SHD-GC Power, Shielded Round

®

Portable w/Ground-Check, EPR/CPE 25000 Volts, 90˚C, Three Conductor

Product Construction Jacket: Features (cont’d):

• Reinforced, two-layer, extra-heavy-duty, lead- • Flexible for easy handling
Conductor: cured Chlorinated Polyethylene (CPE) • High dielectric strength
• 1 AWG thru 350 kcmil coated annealed copper, • Electrical stability under stress
bunched wires, rope-lay-stranded per ASTM Jacket Marking: • Low dielectric loss
B172 • GENERAL CABLE® ANACONDA® BRAND (SIZE) • Resists cutting, impact, abrasion, flame
3/C TYPE SHD-GC 25000 VOLTS (-50C) FT1 and sunlight
Extruded Strand Shield (ESS): FT5 CSA LR 27161 P-7K-102-046 MSHA • Excellent thermal stability and physical
• Extruded thermosetting semi-conducting stress properties over a broad temperature range
control layer over conductor Options: • Two-layer jacket is reinforced to provide
• Colored jackets are available maximum protection from mechanical
Insulation: • TPU (Thermoplastic Polyurethane) jacket damage—the cause of most portable
• Ethylene Propylene Rubber (EPR) insulation • Anamaxx® jacket cable failures
colored for contrast with black conducting layers
Applications: Compliances:
Insulation Shield: • Designed for use as a trailing cable on AC • ICEA S-75-381 Portable and Power Feeder
• An extruded conducting layer covered by a mining equipment: Cables for use in mines and similar applications
conducting tape, and a flexible coated copper/ - Where service conditions are severe and • Meets flame test requirements and is accepted
textile braid shield overall provides greater maximum safety is mandatory (such as power for listing by MSHA
mechanical protection than an equal thickness shovels and draglines in open-pit mines, • Approved by the Pennsylvania Department of
of insulation quarries, gantry cranes and slag reclaiming) Environmental Protection
- For high-voltage distribution in underground • Meets CAN/CSA C22.2 No. 96 Portable Power
Ground-Check Conductor: mines where frequent relocation is necessary Cables and is certified by Natural Resources
• Annealed copper, rope-lay-stranded per ASTM Canada
B172, insulated with high-strength yellow Features:
polypropylene • Simultaneous extrusion and vulcanization of the Packaging:
strand shield, insulation and insulation shield • Material cut to length and shipped on non-
Grounding Conductors: form a virtually perfect electrode, eliminating returnable reels
• Coated copper, rope-lay-stranded per ASTM unequal electrical stresses
B172 • Excellent heat, moisture, steam, oil, corona,
• Two conductors in contact with the flexible chemical and radiation resistance
copper braid shield

1 AWG THRU 350 KCMIL CONDUCTORS, THREE CONDUCTOR,

SHIELDED ROUND PORTABLE W/GROUND-CHECK, TYPE SHD-GC - 25000 VOLTS
NOMINAL NOMINAL NOMINAL COPPER NET
COND. INSULATION GRD. JACKET CABLE WEIGHT WEIGHT
SIZE THICKNESS COND. GRD-CHECK THICKNESS 0.D.
CATALOG NO. OF (AWG/ COND. SIZE COND. SIZE LBS/ kg/ LBS/ kg/
NUMBER COND. kcmil) STRAND INCHES mm (AWG) (AWG) INCHES mm INCHES mm 1000 FT km 1000 FT km AMPACITY

16247.310100.CA 3 1 259 0.260 6.6 5 8 0.265 6.7 2.95 74.93 1306 1943 5290 7872 191
16247.315100.CA 3 1/0 259 0.260 6.6 4 8 0.265 6.7 3.05 77.47 1556 2315 5800 8631 218
16247.315200.CA 3 2/0 329 0.260 6.6 3 8 0.280 7.1 3.20 81.28 1888 2810 6515 9695 249
16247.615300.CA 3 3/0 413 0.260 6.6 2 8 0.280 7.1 3.33 84.58 2303 3428 7215 10737 286
16247.615400.CA 3 4/0 532 0.260 6.6 1 8 0.295 7.5 3.50 88.90 2889 4300 8250 12277 327
16247.616000.CA 3 250 608 0.260 6.6 1/0 6 0.295 7.5 3.54 89.92 3486 5188 9066 13491 360
16247.956200.CA 3 350 851 0.260 6.6 2/0 6 0.295 7.5 3.79 96.37 4579 6815 10118 15057 439
Stock items are available in long lengths for cutting to your specifications. All lengths are subject to a tolerance of +/-5%.
Dimensions and weights shown are nominal, subject to standard industry tolerances. Actual shipping weight may vary.
These ampacities are based on a conductor temperature of 90°C and an ambient air temperature of 40°C, per ICEA S-75-381,
NEMA WC58. For ampacities per National Electrical Code® requirements, refer to the latest NEC edition.

23
Mining-Grade Cable Mining

Anaconda Brand Type VFD-BGC Power, Shielded Round

®

Portable w/Extensible Ground-Check, EPR/CPE

2000 Volts, 90°C, Three Conductor

Product Construction Jacket Marking: Features (cont’d):

• GENERAL CABLE® ANACONDA® BRAND • Flexible for easy handling
Conductor: (SIZE) 3/C TYPE VFD-BGC 2000 VOLTS • Resists cutting, impact, abrasion, flame and
• 2 AWG thru 500 kcmil coated annealed copper, 07-KA140006 MSHA sunlight
bunched wires, rope-lay-stranded per ASTM B172 • Excellent thermal stability and physical
Options: properties over a broad temperature range
Insulation:
• Ethylene Propylene Rubber (EPR) insulation, • Colored jackets are available • Two-layer jacket is reinforced to provide
colored • Anamaxx® jacket maximum protection from mechanical damage—
the cause of most portable cable failures
Ground-Check Conductor: Applications:
• Designed for use as a trailing cable on AC Compliances:
• Coated copper, specially stranded to provide
extensibility without sustaining tensile load, thereby mining equipment: • Meets flame test requirements and is accepted
providing maximum resistance to flex fatigue - From the inverter to the motor on variable for listing by MSHA
• Insulated with high-strength polypropylene and frequency drive (PWM) systems • Approved by the Pennsylvania Department of
placed in the center interstice - Where radiated EMI is causing interference Environmental Protection
with nearby systems
Grounding Conductors: - Where a ground-check conductor is required Packaging:
• Three coated copper, rope-lay-stranded per for fail-safe ground monitoring • Material cut to length and shipped on
ASTM B172 - With wireless ground monitoring systems non-returnable reels

Shield: Features:
• A flexible coated copper braid shield under an • Flexible overall shield provides shock hazard
aluminum tape provides protection from radiated protection
noise and a low transfer impedance path for the • Symmetrical grounding system does not
high frequency components of PWM signals produce induced voltages when operating in a
balanced three-phase system and minimizes
Jacket: common mode current in PWM drive systems
• Reinforced, two-layer, extra-heavy-duty, • Enhanced ground-check conductor has longer
lead-cured Chlorinated Polyethylene (CPE) flex life and durability
• Excellent heat, moisture, steam, oil, chemical
and radiation resistance

2 AWG THRU 500 KCMIL CONDUCTORS, THREE CONDUCTOR, SHIELDED ROUND

PORTABLE W/EXTENSIBLE GROUND-CHECK, TYPE VFD-BGC - 2000 VOLTS
NOMINAL NOMINAL NOMINAL COPPER NET
COND. INSULATION GRD. JACKET CABLE WEIGHT WEIGHT
SIZE THICKNESS COND. GRD-CHECK THICKNESS 0.D.
CATALOG NO. OF (AWG/ COND. SIZE COND. SIZE LBS/ kg/ LBS/ kg/
NUMBER COND. kcmil) STRAND INCHES mm (AWG) (AWG) INCHES mm INCHES mm 1000 FT km 1000 FT km AMPACITY

13373.030200 3 2 259 0.070 1.8 8 16 0.155 3.9 1.45 35.6 914 612 1620 2410 159
13373.030100 3 1 259 0.080 2.0 7 16 0.170 4.3 1.64 41.6 1135 761 2050 3050 184
13373.035100 3 1/0 259 0.080 2.0 6 16 0.170 4.3 1.74 44.2 1407 943 2420 3600 211
13373.035200 3 2/0 329 0.080 2.0 5 16 0.170 4.3 1.81 46.0 1739 1165 2790 4160 243
13373.035300 3 3/0 413 0.080 2.0 4 16 0.170 4.3 1.93 49.0 2149 1440 3850 5730 279
13373.035400 3 4/0 532 0.080 2.0 3 16 0.190 4.8 2.09 53.2 2746 1840 4170 6210 321
13373.036000 3 250 608 0.095 2.4 3 16 0.190 4.8 2.32 59.0 3102 2078 5660 8425 355
13373.036200 3 350 851 0.095 2.4 1 16 0.220 5.6 2.64 67.0 4384 2937 7480 11132 435
13373.036500 3 500 1221 0.095 2.4 1/0 16 0.220 5.6 2.95 75.0 6072 4068 9250 13770 536
Stock items are available in long lengths for cutting to your specifications. All lengths are subject to a tolerance of +/-5%.
Dimensions and weights shown are nominal, subject to standard industry tolerances. Actual shipping weight may vary.
These ampacities are based on a conductor temperature of 90°C and an ambient air temperature of 40°C, per ICEA S-75-381,
NEMA WC58. For ampacities per National Electrical Code® requirements, refer to the latest NEC edition.

24
Mining Mining-Grade Cable

Anaconda Brand Type MP-GC (Uniblend EPR), Mine Power

® ®

Feeder w/Ground-Check, EPR/CPE 5000 Volts, 90˚C, Three Conductor

Product Construction Grounding Conductors: Features:

• Two coated annealed copper conductors, • Excellent heat, moisture, oil, corona, chemical
Conductor: Class B strand and radiation resistance
• 6 AWG thru 500 kcmil annealed bare copper, • High dielectric strength
Compact Class B strand Jacket: • Electrical stability under stress
• Lead-cured Chlorinated Polyethylene (CPE) • Low dielectric loss
Extruded Strand Shield (ESS): • Triple extrusion forms a virtually perfect
• Extruded thermosetting semi-conducting stress Jacket Marking: electrode, eliminating unequal electrical stresses
control layer over conductor • GENERAL CABLE® ANACONDA® BRAND • Tough and reliable
(SIZE) 3/C TYPE MP-GC 5000 VOLTS • Highly resistant to tearing, punctures, abrasions,
Insulation: P-07-KA110019-MSHA oil and flame
• Ethylene Propylene Rubber (EPR) insulation
colored for contrast with black conducting layers Options: Compliances:
• Colored jackets are available • ICEA S-75-381 Portable and Power Feeder
Extruded Insulation Shield (EIS): • CSA compliance available upon request Cables for use in mines and similar applications
• Extruded thermosetting semi-conducting layer, • Meets flame test requirements and is accepted
free stripping from insulation with color-coded Applications: for listing by MSHA
(black, white and red) marker strip placed under • Provides high-voltage distribution intended for • Approved by the Pennsylvania Department of
the copper tape permanent installations Environmental Protection
• Designed for use: • Meets CAN/CSA C22.2 No. 96.1 Mine Power
Insulation Shield: - In underground mining and bore holes Feeder Cables
• Overlapped annealed copper tape - In aerial installations, ducts or direct burial
Packaging:
Ground-Check Conductor: • Material cut to length and shipped on non-
• Annealed copper Class B strand, insulated with returnable reels
yellow polypropylene

6 AWG THRU 500 KCMIL CONDUCTORS, THREE CONDUCTOR, MINE POWER FEEDER
W/GROUND-CHECK, TYPE MP-GC (UNIBLEND® EPR) - 5000 VOLTS*
NOMINAL NOMINAL NOMINAL COPPER NET
COND. INSULATION GRD. GRD- JACKET CABLE WEIGHT WEIGHT
SIZE THICKNESS COND. SIZE CHECK THICKNESS 0.D.
CATALOG NO. OF (AWG/ COND. (AWG)/ COND. SIZE LBS/ kg/ LBS/ kg/
NUMBER COND. kcmil) STRAND INCHES mm COND. STRAND (AWG) INCHES mm INCHES mm 1000 FT km 1000 FT km AMPACITY

16361.910600 3 6 7 0.090 2.3 10 7 8 0.110 2.8 1.30 33.0 468 696 1060 1577 93
16361.910400 3 4 7 0.090 2.3 8 7 8 0.110 2.8 1.41 35.8 664 988 1325 1972 122
16361.910200 3 2 7 0.090 2.3 6 7 8 0.110 2.8 1.47 37.3 970 1444 1651 2457 159
16361.910100 3 1 19 0.090 2.3 5 7 8 0.110 2.8 1.54 39.1 1186 1764 1918 2854 184
16361.915100 3 1/0 19 0.090 2.3 4 7 8 0.110 2.8 1.63 41.4 1453 2162 2244 3339 211
16361.915200 3 2/0 19 0.090 2.3 3 7 8 0.110 2.8 1.72 43.7 1623 2415 2644 3935 243
16361.915300 3 3/0 19 0.090 2.3 2 7 8 0.140 3.6 1.89 48.0 2215 3296 3265 4859 279
16361.915400 3 4/0 19 0.090 2.3 1 19 8 0.140 3.6 2.01 51.0 2749 4091 3890 5789 321
16361.916000 3 250 37 0.090 2.3 1/0 19 8 0.140 3.6 2.10 53.3 3263 4857 4474 6658 355
16361.916200 3 350 37 0.090 2.3 2/0 19 8 0.140 3.6 2.31 58.7 4401 6549 5765 8579 435
16361.916500 3 500 37 0.090 2.3 4/0 19 8 0.140 3.6 2.59 65.8 6335 9428 7906 11765 536
Stock items are available in long lengths for cutting to your specifications. All lengths are subject to a tolerance of +/-5%.
Dimensions and weights shown are nominal, subject to standard industry tolerances. Actual shipping weight may vary.
These ampacities are based on a conductor temperature of 90°C and an ambient air temperature of 40°C, per ICEA S-75-381,
NEMA WC58. For ampacities per National Electrical Code® requirements, refer to the latest NEC edition.
*100% insulation level, grounded.

25
Mining-Grade Cable Mining

Anaconda Brand Type MP-GC (Uniblend EPR), Mine Power

® ®

Feeder w/Ground-Check, EPR/CPE 8000 Volts, 90˚C, Three Conductor

Product Construction Grounding Conductors: Features:

• Two coated annealed copper conductors, • Excellent heat, moisture, oil, corona, chemical
Conductor: Class B strand and radiation resistance
• 6 AWG thru 500 kcmil annealed bare copper, • High dielectric strength
Compact Class B strand Jacket: • Electrical stability under stress
• Lead-cured Chlorinated Polyethylene (CPE) • Low dielectric loss
Extruded Strand Shield (ESS): • Triple extrusion forms a virtually perfect
• Extruded thermosetting semi-conducting stress Jacket Marking: electrode, eliminating unequal electrical stresses
control layer over conductor • GENERAL CABLE® ANACONDA® BRAND • Tough and reliable
(SIZE) 3/C TYPE MP-GC 8000 VOLTS • Highly resistant to tearing, punctures, abrasions,
Insulation: P-07-KA110019-MSHA oil and flame
• Ethylene Propylene Rubber (EPR) insulation
colored for contrast with black conducting layers Options: Compliances:
• Colored jackets are available • ICEA S-75-381 Portable and Power Feeder
Extruded Insulation Shield (EIS): • CSA compliance available upon request Cables for use in mines and similar applications
• Extruded thermosetting semi-conducting layer, • Meets flame test requirements and is accepted
free stripping from insulation with color-coded Applications: for listing by MSHA
(black, white and red) marker strip placed under • Provides high-voltage distribution intended for • Approved by the Pennsylvania Department of
the copper tape permanent installations Environmental Protection
• Designed for use: • Meets CAN/CSA C22.2 No. 96.1 Mine Power
Insulation Shield: - In underground mining and bore holes Feeder Cables
• Overlapped annealed copper tape - In aerial installations, ducts or direct burial
Packaging:
Ground-Check Conductor: • Material cut to length and shipped on non-
• Annealed copper Class B strand, insulated with returnable reels
yellow polypropylene

6 AWG THRU 500 KCMIL CONDUCTORS, THREE CONDUCTOR,

MINE POWER FEEDER W/GROUND-CHECK, TYPE MP-GC (UNIBLEND® EPR) - 8000 VOLTS*
NOMINAL NOMINAL NOMINAL COPPER NET
COND. INSULATION GRD. GRD- JACKET CABLE WEIGHT WEIGHT
SIZE THICKNESS COND. SIZE CHECK THICKNESS 0.D.
CATALOG NO. OF (AWG/ COND. (AWG)/ COND. SIZE LBS/ kg/ LBS/ kg/
NUMBER COND. kcmil) STRAND INCHES mm COND. STRAND (AWG) INCHES mm INCHES mm 1000 FT km 1000 FT km AMPACITY

16363.910600 3 6 7 0.115 2.9 10 7 8 0.110 2.8 1.41 35.8 478 712 1175 1749 93
16363.910400 3 4 7 0.115 2.9 8 7 8 0.110 2.8 1.52 38.6 674 1003 1455 2165 122
16363.910200 3 2 7 0.115 2.9 6 7 8 0.110 2.8 1.58 40.1 981 1459 1787 2659 159
16363.910100 3 1 19 0.115 2.9 5 7 8 0.110 2.8 1.66 42.2 1196 1780 2059 3064 184
16363.915100 3 1/0 19 0.115 2.9 4 7 8 0.110 2.8 1.74 44.2 1463 2177 2378 3539 211
16363.915200 3 2/0 19 0.115 2.9 3 7 8 0.140 3.6 1.90 48.3 1801 2681 2912 4334 243
16363.915300 3 3/0 19 0.115 2.9 2 7 8 0.140 3.6 2.00 50.8 2225 3311 3432 5107 279
16354.552364 3 4/0 19 0.115 2.9 1 19 8 0.140 3.6 2.12 53.8 2671 3975 4056 6035 321
16363.916000 3 250 37 0.115 2.9 1/0 19 8 0.140 3.6 2.22 56.4 2909 4330 4647 6915 355
16363.916200 3 350 37 0.115 2.9 2/0 19 8 0.140 3.6 2.43 61.7 4411 6565 5979 8898 435
16363.916500 3 500 37 0.115 2.9 4/0 19 8 0.140 3.6 2.70 68.6 6346 9443 8150 12129 536
Stock items are available in long lengths for cutting to your specifications. All lengths are subject to a tolerance of +/-5%.
Dimensions and weights shown are nominal, subject to standard industry tolerances. Actual shipping weights may vary.
These ampacities are based on a conductor temperature of 90°C and an ambient air temperature of 40°C, per ICEA S-75-381,
NEMA WC58. For ampacities per National Electrical Code® requirements, refer to the latest NEC edition.
*100% insulation level, grounded.

26
Mining Mining-Grade Cable

Anaconda Brand Type MP-GC (Uniblend EPR), Mine Power

® ®

Feeder w/Ground-Check, EPR/CPE 15000 Volts, 90˚C, Three Conductor

Product Construction Grounding Conductors: Features:

• Two coated annealed copper conductors, • Excellent heat, moisture, oil, corona, chemical
Conductor: Class B strand and radiation resistance
• 2 AWG thru 500 kcmil annealed bare copper, • High dielectric strength
Compact Class B strand Jacket: • Electrical stability under stress
• Lead-cured Chlorinated Polyethylene (CPE) • Low dielectric loss
Extruded Strand Shield (ESS): • Triple extrusion forms a virtually perfect
• Extruded thermosetting semi-conducting stress Jacket Marking: electrode, eliminating unequal electrical stresses
control layer over conductor • GENERAL CABLE® ANACONDA® BRAND • Tough and reliable
(SIZE) 3/C TYPE MP-GC 15000 VOLTS • Highly resistant to tearing, punctures, abrasions,
Insulation: P-07-KA110019-MSHA oil and flame
• Ethylene Propylene Rubber (EPR) insulation
colored for contrast with black conducting layers Options: Compliances:
• Colored jackets are available • ICEA S-75-381 Portable and Power Feeder
Extruded Insulation Shield (EIS): • CSA compliance available upon request Cables for use in mines and similar applications
• Extruded thermosetting semi-conducting layer, • Meets flame test requirements and is accepted
free stripping from insulation with color-coded Applications: for listing by MSHA
(black, white and red) marker strip placed under • Provides high-voltage distribution intended for • Approved by the Pennsylvania Department of
the copper tape permanent installations Environmental Protection
• Designed for use: • Meets CAN/CSA C22.2 No. 96.1 Mine Power
Insulation Shield: - In underground mining and bore holes Feeder Cables
• Overlapped annealed copper tape - In aerial installations, ducts or direct burial
Packaging:
Ground-Check Conductor: • Material cut to length and shipped on non-
• Annealed copper Class B strand, insulated with returnable reels
yellow polypropylene

2 AWG THRU 500 KCMIL CONDUCTORS, THREE CONDUCTOR,

MINE POWER FEEDER W/GROUND-CHECK, TYPE MP-GC (UNIBLEND® EPR) - 15000 VOLTS*
NOMINAL NOMINAL NOMINAL COPPER NET
COND. INSULATION GRD. JACKET CABLE WEIGHT WEIGHT
SIZE THICKNESS COND. GRD-CHECK THICKNESS 0.D.
CATALOG NO. OF (AWG/ COND. SIZE COND. SIZE LBS/ kg/ LBS/ kg/
NUMBER COND. kcmil) STRAND INCHES mm (AWG) (AWG) INCHES mm INCHES mm 1000 FT km 1000 FT km AMPACITY

16365.910200 3 2 7 0.175 4.4 6 8 0.140 3.6 1.90 48.3 938 1395 2248 3345 164
16365.910100 3 1 19 0.175 4.4 5 8 0.140 3.6 1.99 50.6 1122 1669 2552 3798 187
16365.915100 3 1/0 19 0.175 4.4 4 8 0.140 3.6 2.07 52.6 1490 2218 2901 4317 215
16365.915200 3 2/0 19 0.175 4.4 3 8 0.140 3.6 2.16 54.9 1808 2691 3341 4972 246
16365.915300 3 3/0 19 0.175 4.4 2 8 0.140 3.6 2.27 57.7 2252 3352 3878 5771 283
16354.396889 3 4/0 19 0.175 4.4 1 8 0.140 3.6 2.39 60.7 2688 4000 4541 6758 325
16365.916000 3 250 37 0.175 4.4 1/0 8 0.140 3.6 2.48 63.0 3269 4865 5145 7657 359
16362.279989 3 350 37 0.175 4.4 2/0 8 0.140 3.6 2.70 68.6 4309 6412 6517 9698 438
16365.916500 3 500 37 0.175 4.4 4/0 8 0.170 4.3 3.08 78.2 6208 9239 9058 13480 536
Stock items are available in long lengths for cutting to your specifications. All lengths are subject to a tolerance of +/-5%.
Dimensions and weights shown are nominal, subject to standard industry tolerances. Actual shipping weight may vary.
These ampacities are based on a conductor temperature of 90°C and an ambient air temperature of 40°C, per ICEA S-75-381,
NEMA WC58. For ampacities per National Electrical Code® requirements, refer to the latest NEC edition.
*100% insulation level, grounded.

27
Mining-Grade Cable Mining

Anaconda Brand Type MP-GC (Uniblend EPR), Mine Power

® ®

Feeder w/Ground-Check, EPR/CPE 25000 Volts, 90˚C, Three Conductor

Product Construction Grounding Conductors: Features:

• Two coated annealed copper conductors, • Excellent heat, moisture, oil, corona, chemical
Conductor: Class B strand and radiation resistance
• 1 AWG thru 500 kcmil annealed bare copper, • High dielectric strength
Compact Class B strand Jacket: • Electrical stability under stress
• Lead-cured Chlorinated Polyethylene (CPE) • Low dielectric loss
Extruded Strand Shield (ESS): • Triple extrusion forms a virtually perfect
• Extruded thermosetting semi-conducting stress Jacket Marking: electrode, eliminating unequal electrical stresses
control layer over conductor • GENERAL CABLE® ANACONDA® BRAND • Tough and reliable
(SIZE) 3/C TYPE MP-GC 25000 VOLTS • Highly resistant to tearing, punctures, abrasions,
Insulation: P-07-KA110019-MSHA oil and flame
• Ethylene Propylene Rubber (EPR) insulation
colored for contrast with black conducting layers Options: Compliances:
• Colored jackets are available • ICEA S-75-381 Portable and Power Feeder
Extruded Insulation Shield (EIS): • CSA compliance available upon request Cables for use in mines and similar applications
• Extruded thermosetting semi-conducting layer, • Meets flame test requirements and is accepted
free stripping from insulation with color-coded Applications: for listing by MSHA
(black, white and red) marker strip placed under • Provides high-voltage distribution intended for • Approved by the Pennsylvania Department of
the copper tape permanent installations Environmental Protection
• Designed for use: • Meets CAN/CSA C22.2 No. 96.1 Mine Power
Insulation Shield: - In underground mining and bore holes Feeder Cables
• Overlapped annealed copper tape - In aerial installations, ducts or direct burial
Packaging:
Ground-Check Conductor: • Material cut to length and shipped on non-
• Annealed copper Class B strand, insulated with returnable reels
yellow polypropylene

1 AWG THRU 500 KCMIL CONDUCTORS, THREE CONDUCTOR,

MINE POWER FEEDER W/GROUND-CHECK, TYPE MP-GC (UNIBLEND® EPR) - 25000 VOLTS*
NOMINAL NOMINAL NOMINAL COPPER NET
COND. INSULATION GRD. JACKET CABLE WEIGHT WEIGHT
SIZE THICKNESS COND. GRD-CHECK THICKNESS 0.D.
CATALOG NO. OF (AWG/ COND. SIZE COND. SIZE LBS/ kg/ LBS/ kg/
NUMBER COND. kcmil) STRAND INCHES mm (AWG) (AWG) INCHES mm INCHES mm 1000 FT km 1000 FT km AMPACITY

16367.910100 3 1 19 0.260 6.4 5 8 0.140 3.6 2.37 60.2 1261 1877 3435 5112 187
16367.915100 3 1/0 19 0.260 6.4 4 8 0.140 3.6 2.45 62.2 1528 2275 3815 5677 218
16367.915200 3 2/0 19 0.260 6.4 3 8 0.140 3.6 2.54 64.5 1866 2778 4290 6384 249
16367.915300 3 3/0 19 0.260 6.4 2 8 0.140 3.6 2.65 67.3 2290 3409 4875 7255 286
16367.915400 3 4/0 19 0.260 6.4 1 8 0.140 3.6 2.81 71.4 2825 4204 5665 8430 327
16367.916000 3 250 37 0.260 6.4 1/0 8 0.170 4.3 2.97 75.4 3339 4969 6495 9666 360
16367.916200 3 350 37 0.260 6.4 2/0 8 0.170 4.3 3.18 80.8 4326 6439 7970 11860 438
16367.916500 3 500 37 0.260 6.4 4/0 8 0.170 4.3 3.45 87.6 6411 9541 10300 15328 536
Stock items are available in long lengths for cutting to your specifications. All lengths are subject to a tolerance of +/-5%.
Dimensions and weights shown are nominal, subject to standard industry tolerances. Actual shipping weight may vary.
These ampacities are based on a conductor temperature of 90°C and an ambient air temperature of 40°C, per ICEA S-75-381,
NEMA WC58. For ampacities per National Electrical Code® requirements, refer to the latest NEC edition.
*100% insulation level, grounded.

28
Mining Mining-Grade Cable

Anaconda Brand Type MP-GC, Mine Power Feeder

®

w/Ground-Check, XLPE/PVC 8000 Volts, 90˚C, Three Conductor

Product Construction Grounding Conductors: Features:

• Two bare annealed copper conductors, • Excellent moisture, oil, chemical and corona
Conductor: Class B strand resistance
• 2 AWG thru 500 kcmil annealed compact bare • High dielectric strength
copper, in accordance with ASTM B8 Jacket: • Electrical stability under stress
• Heavy-duty Polyvinyl Chloride (PVC) • Low dielectric loss
Extruded Strand Shield (ESS): • Tough and reliable
• Extruded thermosetting semi-conducting stress Jacket Marking: • Highly resistant to tearing, punctures, abrasions
control layer over the conductor • GENERAL CABLE® ANACONDA® BRAND and oils
(SIZE) 3/C TYPE MP-GC 8000 VOLTS
Insulation: P-125-25 MSHA Compliances:
• Cross-Linked Polyethylene (XLPE) insulation • ICEA S-75-381 Portable and Power Feeder
Options: Cables for use in mines and similar applications
Extruded Insulation Shield (EIS): • Colored jackets are available • Meets flame test requirements and is accepted
• Extruded thermosetting semi-conducting layer, • CSA compliance available upon request for listing by MSHA
free stripping from insulation with a color-coded • Meets CAN/CSA C22.2 No. 96.1 Mine Power
(black, white and red) marker strip placed under Applications: Feeder Cables
the copper tape • Provides high-voltage distribution intended for
permanent installations Packaging:
Insulation Shield: • Designed for use: • Material cut to length and shipped on
• Overlapped annealed copper tape -In underground mining and bore holes non-returnable reels
-In aerial installations, ducts or direct burial
Ground-Check Conductor:
• Annealed copper Class B strand, insulated with
yellow compound

2 AWG THRU 500 KCMIL CONDUCTORS, THREE CONDUCTOR,

MINE POWER FEEDER W/GROUND-CHECK, TYPE MP-GC - 8000 VOLTS
NOMINAL NOMINAL COPPER NET
INSULATION GRD. GRD- JACKET NOMINAL WEIGHT WEIGHT
COND. THICKNESS COND. CHECK THICKNESS CABLE O.D.
CATALOG NO. OF SIZE COND. SIZE COND. SIZE LBS/ kg/ LBS/ kg/
NUMBER COND. (AWG) STRAND INCHES mm (AWG) (AWG) INCHES mm INCHES mm 1000 FT km 1000 FT km AMPACITY

37017.99.01 3 2 7 0.115 2.92 6 8 0.110 2.8 1.58 40.13 827 1231 1774 2640 159
37019.99.01 3 2/0 19 0.115 2.92 3 8 0.140 3.6 1.88 47.75 1791 2665 2737 4073 243
37021.99.01 3 4/0 19 0.115 2.92 1 8 0.140 3.6 2.12 53.80 2613 3888 3815 5677 321
37022.99.01 3 250 37 0.115 2.92 1/0 8 0.140 3.6 2.25 57.15 3288 4893 4575 6808 355
37024.99.01 3 350 37 0.115 2.92 2/0 8 0.140 3.6 2.46 62.48 4426 6586 5872 8738 435
37026.99.01 3 500 37 0.115 2.92 4/0 8 0.140 3.6 2.75 69.85 6295 9368 7962 11348 536
Stock items are available in long lengths for cutting to your specifications. All lengths are subject to a tolerance of +/-5%.
Dimensions and weights shown are nominal, subject to standard industry tolerances. Actual shipping weight may vary.
These ampacities are based on a conductor temperature of 90°C and an ambient air temperature of 40°C, per ICEA S-75-381,
NEMA WC58. For ampacities per National Electrical Code® requirements, refer to the latest NEC edition.

29
Mining-Grade Cable Mining

Anaconda Brand Type MP-GC, Mine Power Feeder

®

w/Ground-Check, XLPE/PVC 15000 Volts, 90˚C, Three Conductor

Product Construction Grounding Conductors: Features:

• Two bare annealed copper conductors, • Excellent moisture, oil, chemical and corona
Conductor: Class B strand resistance
• 2 AWG thru 500 kcmil annealed compact bare • High dielectric strength
copper, in accordance with ASTM B8 Jacket: • Electrical stability under stress
• Heavy-duty Polyvinyl Chloride (PVC) • Low dielectric loss
Extruded Strand Shield (ESS): • Tough and reliable
• Extruded thermosetting semi-conducting stress Jacket Marking: • Highly resistant to tearing, punctures, abrasions
control layer over the conductor • GENERAL CABLE® ANACONDA® BRAND and oils
(SIZE) 3/C TYPE MP-GC 15000 VOLTS
Insulation: P-125-25 MSHA Compliances:
• Cross-Linked Polyethylene (XLPE) insulation • ICEA S-75-381 Portable and Power Feeder
Options: Cables for use in mines and similar applications
Extruded Insulation Shield (EIS): • Colored jackets are available • Meets flame test requirements and is accepted
• Extruded thermosetting semi-conducting layer, • CSA compliance available upon request for listing by MSHA
free stripping from insulation with a color-coded • Meets CAN/CSA C22.2 No. 96.1 Mine Power
(black, white and red) marker strip placed under Applications: Feeder Cables
the copper tape • Provides high-voltage distribution intended for
permanent installations Packaging:
Insulation Shield: • Designed for use: • Material cut to length and shipped on
• Overlapped annealed copper tape -In underground mining and bore holes non-returnable reels
-In aerial installations, ducts or direct burial
Ground-Check Conductor:
• Annealed copper Class B strand, insulated with
yellow compound

2 AWG THRU 500 KCMIL CONDUCTORS, THREE CONDUCTOR,

MINE POWER FEEDER W/GROUND-CHECK, TYPE MP-GC - 15000 VOLTS
NOMINAL NOMINAL COPPER NET
INSULATION GRD. GRD- JACKET NOMINAL WEIGHT WEIGHT
COND. THICKNESS COND. CHECK THICKNESS CABLE O.D.
CATALOG NO. OF SIZE COND. SIZE COND. SIZE LBS/ kg/ LBS/ kg/
NUMBER COND. (AWG) STRAND INCHES mm (AWG) (AWG) INCHES mm INCHES mm 1000 FT km 1000 FT km AMPACITY

37032.99.01 3 2 7 0.175 4.46 6 8 0.140 3.6 1.95 49.50 938 1396 1972 2935 164
37035.99.01 3 2/0 19 0.175 4.46 3 8 0.140 3.6 2.13 54.10 1808 2691 3105 4621 246
37037.99.01 3 4/0 19 0.175 4.46 1 8 0.140 3.6 2.36 59.90 2688 4000 4150 6176 325
37038.99.01 3 250 37 0.175 4.46 1/0 8 0.140 3.6 2.50 63.58 3317 4936 4997 7436 359
37040.99.01 3 350 37 0.175 4.46 2/0 8 0.140 3.6 2.75 69.85 4311 6415 6270 9330 438
37042.99.01 3 500 37 0.175 4.46 4/0 8 0.170 4.3 3.10 78.74 6330 9420 8682 12920 536
Stock items are available in long lengths for cutting to your specifications. All lengths are subject to a tolerance of +/-5%.
Dimensions and weights shown are nominal, subject to standard industry tolerances. Actual shipping weight may vary.
These ampacities are based on a conductor temperature of 90°C and an ambient air temperature of 40°C, per ICEA S-75-381,
NEMA WC58. For ampacities per National Electrical Code® requirements, refer to the latest NEC edition.

30
Mining Industrial-Grade Cable

Carol Brand Industrial-Grade Cables

®
2

Index Page

Super Vu-Tron®
Single Conductor 32

Super Vu-Tron®
Multi-Conductor
Carol® Brand industrial-grade The advantage of General Type W Round 33
portable cables provide cost- Cable’s experience and expertise
Super Vu-Tron® Type G
effective yet dependable in mining cable technology and Type G-GC Round 34
performance over the life of the continues to provide practical
cable for all power and control benefits over the entire life Carolprene® 105°C
cable applications where the cycle of a particular cable in Welding Cable 35
cables will not encounter a high a specific application. Better
degree of flexing and physical design and construction, more Carolprene® Welding Cable 36
abuse. advanced materials and process Super Vu-Tron®
technology, and more reliable Welding Cable 37
For these low-flex, stationary performance over a longer
and/or non-critical uses, Carol® time result in lower cost per Super Vu-Tron® Single
Brand mining cables offer a ton. Carol® Brand cables are Conductor Type W Extra Flex 38
viable, rugged, reliable option, engineered to complement the
along with significant cost Anaconda® Brand product line.
savings. A heavy-duty-grade,
single-layer, CV-cured thermoset Whatever the specific
jacket ensures performance requirement, General Cable can
exceeding requirements for provide the best performance,
standard applications including best fit, best cost solution for any
pumps, belt drives, battery packs application.
and other general-purpose uses.

Our industrial-grade cables

carry a full range of listings and
certifications with Underwriters
Laboratories, Inc. and the
Canadian Standard Association.
In addition, many products meet
or exceed the requirements of
MSHA and other relevant industry
standards.

31
Industrial-Grade Cable Mining
®
Super Vu-Tron Single Conductor
90ºC (UL), Type W, 2000 Volt and Type RHH/RHW
600 Volt Portable Power Cable
Product Construction:
Conductor:
• 8 AWG through 500 kcmil fully annealed stranded
bare copper
Insulation:
• Premium-grade 90ºC EPDM
Jacket:
• Super Vu-Tron® 90ºC, black
• Temperature range: -40ºC to +90ºC
• Voltage rating: TYPE W 2000 VOLT (UL) AND TYPE RHH/RHW 600 VOLT (UL)
600 volts Type RHH/RHW APPROX.
NOMINAL NOMINAL INS. CURRENT
2000 volts Type W NO. AWG NET WT.
COND. O.D. THICKNESS NOMINAL O.D. AMPS
• An open polyester braid reinforcement is applied CATALOG OF OR COND. LBS/
between the insulation and jacket for mechanical NUMBER COND. kcmil STRAND INCHES mm INCHES mm INCHES mm (1) (2) M'(S)
strength
Jacket Marking: 83008* 1 8 133 0.167 4.24 0.070 1.78 0.485 12.32 55 80 150
• 8-1 AWG: CAROL SUPER VU-TRON® TYPE
W PORTABLE POWER CABLE (UL) DRY 90°C
83006 1 6 259 0.210 5.33 0.070 1.78 0.565 14.35 75 105 214
WET 75°C 2000 V SUNLIGHT RESISTANT P-7K- 83004 1 4 259 0.245 6.22 0.070 1.78 0.605 15.37 95 140 277
123049-MSHA (SIZE) TYPE RHH OR RHW (UL)
600 V MADE IN USA (TRU-MARK SEQUENTIAL 83002 1 2 259 0.334 8.48 0.070 1.78 0.680 17.27 130 190 387
FOOTAGE)
• 1/0-500 kcmil: CAROL SUPER VU-TRON® TYPE 83001 1 1 259 0.375 9.53 0.090 2.29 0.765 19.43 150 220 485
W PORTABLE POWER CABLE (UL) DRY 90°C
83010 1 1/0† 259 0.385 9.78 0.090 2.29 0.810 20.57 170 260 563
WET 75°C 2000 V SUNLIGHT RESISTANT P-7K-
123049-MSHA (SIZE) TYPE RHH OR RHW (UL) 83020 1 2/0† 259 0.475 12.07 0.090 2.29 0.885 22.48 195 300 679
600 V FOR CT USE --- CSA TYPE W (-40°C)
2 KV FT5 MADE IN USA (TRU-MARK 83030 1 3/0† 259 0.480 12.19 0.090 2.29 0.930 23.62 225 350 809
SEQUENTIAL FOOTAGE)
83040 1 4/0† 259 0.570 14.48 0.090 2.29 0.980 24.89 260 405 973
Applications:
• Portable power systems 83250 1 250† 627 0.615 15.62 0.105 2.67 1.045 26.54 290 455 1155
• Entertainment industry activities such as theatre,
television, night clubs, motion pictures, mobile 83350 1 350† 855 0.725 18.42 0.105 2.67 1.145 29.08 350 570 1492
communication vans, spotlights and sound 83500 1 500† 1235 0.880 22.35 0.105 2.67 1.310 33.27 430 700 2048
systems
• Other similar applications that would require * Non-stock item; minimum quantity purchase required.
permanent or temporary power (1)
Ampacities based on 90°C conductor and 30°C ambient temperature based on Table 310-16 in the National
• Permanent wiring of 600 volt power supplies, Electrical Code® for RHH/RHW with not more than three current-carrying conductors in raceway, cable or earth.
hoists, cranes and other applications where (2)
Ampacities based on 90°C conductor and 30°C ambient temperature based on Table 310-17 and Table 400.5(A)(2)
flexible power leads must be installed in conduit in the National Electrical Code® for single-conductor cables.
(S)
or raceways Actual shipping weight may vary.
† Designated for CT use.
Features:
• Water-resistant*
• Sunlight-resistant
• Designed to withstand severe environmental
conditions
• Withstands exposure to oil, acids, alkalies, heat,
flame, moisture and chemicals
• Meets or exceeds flame test requirements of
MSHA and UL
• TRU-Mark® sequential footage marking
Industry Approvals:
• ICEA S-75-381 NEMA WC58
• UL Type W
• UL Type RHH or RHW
• MSHA Approved
• RoHS Compliant
Packaging:
• Lengths cut to order
* Suitable for immersion in water if properly sealed and
terminated.

32
Mining Industrial-Grade Cable

Super Vu-Tron Multi-Conductor Type W Round ®

90ºC (UL), Type W, 2000 Volt Portable Power Cable

Product Construction:
Conductor:
• 8 AWG through 500 kcmil fully annealed stranded
bare copper
Insulation:
• Premium-grade, color-coded 90ºC EPDM
• Color code: See chart below
Jacket:
• Super Vu-Tron® 90ºC, black
• Temperature range: -40ºC to +90ºC
NOMINAL NOMINAL INS. Jacket Marking:
AWG COND. O.D. THICKNESS NOMINAL O.D. APPROX. • SIZES SMALLER THAN 2-1/4" – CAROL SUPER
CATALOG NO. OF OR COND. CURRENT NET WT. VU-TRON® (SIZE) TYPE W PORTABLE POWER
NUMBER COND. kcmil STRAND INCHES mm INCHES mm INCHES mm AMPS LBS/M'(S)
(1)
CABLE (UL) 2000 V DRY 90°C WET 75°C SUN
2 CONDUCTOR – TYPE W – 2000 VOLT RES P-7K-123049-MSHA---CSA TYPE W
81312 2 8 133 0.160 4.06 0.060 1.52 0.770 19.56 74 325 (-40°C) 2 KV FT5 MADE IN USA (TRU-MARK
SEQUENTIAL FOOTAGE)
81622 2 6 259 0.198 5.03 0.060 1.52 0.910 23.11 99 470 • SIZES 2-1/4" AND LARGER – (SIZE) TYPE W
81642 2 4 259 0.245 6.22 0.060 1.52 1.020 25.91 130 620 CAROL SUPER VU-TRON® 90°C DRY AND
81662 2 2 259 0.297 7.54 0.080 2.03 1.210 30.73 174 935 WATER RESISTANT 75°C 2000 V SUN RES (UL)
81372* 2 1 259 0.353 8.97 0.080 2.03 1.370 34.80 202 1305 P-7K-123049 MSHA LR27161 MADE IN USA
(TRU-MARK SEQUENTIAL FOOTAGE)
81382* 2 1/0 259 0.385 9.78 0.080 2.03 1.435 36.45 234 1555
81392* 2 2/0 259 0.442 11.23 0.080 2.03 1.555 39.50 271 1860 Applications:
• Industrial and light- to medium-duty mining
81402* 2 3/0 259 0.480 12.19 0.080 2.03 1.670 42.42 313 2230
applications
81412* 2 4/0 259 0.555 14.10 0.080 2.03 1.815 46.10 361 2655 • Heavy-duty service as power supply cable
3 CONDUCTOR – TYPE W – 2000 VOLT • AC systems (grounded and ungrounded)
81313 3 8 133 0.160 4.06 0.060 1.52 0.925 23.50 74 470 • Mobile and portable electrical equipment
• Motor and battery leads
81623 3 6 259 0.198 5.03 0.060 1.52 0.995 25.27 99 625 • 2-conductor cables—use on DC or AC single-
81643 3 4 259 0.245 6.22 0.060 1.52 1.095 27.81 130 810 phase systems where grounding is not required
81663 3 2 259 0.297 7.54 0.080 2.03 1.285 32.64 174 1190 • 3-conductor cables—use on AC systems where
81373* 3 1 259 0.353 8.97 0.080 2.03 1.445 36.70 202 1655 no grounding is required or on DC systems with
one conductor for grounding
81383 3 1/0 259 0.385 9.78 0.080 2.03 1.555 39.50 234 1965 • 4-conductor cables—use on two- or three-
81393 3 2/0 259 0.442 11.23 0.080 2.03 1.670 42.42 271 2350 phase AC systems with one conductor used for
81403* 3 3/0 259 0.480 12.19 0.080 2.03 1.815 46.10 313 2890 grounding
81413* 3 4/0 259 0.555 14.10 0.080 2.03 1.930 49.02 361 3285 • 5-conductor cables—use in applications where
separating the system neutral from the frame
81423* 3 250 627 0.615 15.62 0.095 2.41 2.390 60.71 402 5070 ground is required
81443* 3 350 855 0.725 18.42 0.095 2.41 2.680 68.07 495 6570
81473* 3 500 1235 0.880 22.35 0.095 2.41 3.030 76.96 613 8700 Features:
• Withstands severe environmental conditions
4 CONDUCTOR – TYPE W – 2000 VOLT • Suitable for immersion in water*
81314 4 8 133 0.160 4.06 0.060 1.52 0.980 24.89 65 615 • Indent-printed for easy identification
81624 4 6 259 0.198 5.03 0.060 1.52 1.070 27.18 87 800 • Withstands exposure to oil, acids, alkalies, heat,
moisture and most chemicals
81644 4 4 259 0.245 6.22 0.060 1.52 1.210 30.73 114 1040 • Rope lay stranding for maximum flex life
81664 4 2 259 0.297 7.54 0.080 2.03 1.435 36.45 152 1580 • Excellent impact resistance
81374 4 1 259 0.353 8.97 0.080 2.03 1.595 40.51 177 2045 • Cable core bound for superior flexibility and
81384 4 1/0 259 0.385 9.78 0.080 2.03 1.705 43.31 205 2430 toughness
• Sunlight-resistant
81394 4 2/0 259 0.442 11.23 0.080 2.03 1.845 46.86 237 2950 • TRU-Mark® sequential footage marking
81404 4 3/0 259 0.480 12.19 0.080 2.03 1.965 49.91 274 3430
Industry Approvals:
81414 4 4/0 259 0.555 14.10 0.080 2.03 2.145 54.48 316 3885
• CSA
5 CONDUCTOR – TYPE W – 2000 VOLT • MSHA Approved
81315 5 8 133 0.160 4.06 0.060 1.52 1.030 26.16 52 650 • UL Type W
81625 5 6 259 0.198 5.03 0.060 1.52 1.170 29.72 69 915 • RoHS Compliant
81645 5 4 259 0.245 6.22 0.060 1.52 1.360 34.54 91 1320 Packaging:
81665 5 2 259 0.297 7.54 0.080 2.03 1.595 40.51 121 1925 • Lengths cut to order
81375* 5 1 259 0.353 8.97 0.080 2.03 1.820 46.23 141 2675 * Suitable for immersion in water if properly sealed and
terminated.
81385 5 1/0 259 0.385 9.78 0.080 2.03 1.900 48.26 164 2885
81395* 5 2/0 259 0.442 11.23 0.080 2.03 2.060 52.32 189 3630 COLOR CODE CHART
81405* 5 3/0 259 0.480 12.19 0.080 2.03 2.260 57.40 219 4900
NO. OF
81415* 5 4/0 259 0.555 14.10 0.080 2.03 2.460 62.48 252 5980 CONDUCTORS COLOR**
(1)
Ampacities based on 90°C conductor and 30°C ambient temperature per Table 400.5(A)(2) of the National Electrical Code®. 2 Black, White
* Non-stock item; minimum quantity purchase required.
** Green conductor for grounding only. 3 Black, White, Green
(S)
Actual shipping weight may vary. 4 Black, White, Red, Green
5 Black, White, Red, Green, Orange

33
Industrial-Grade Cable Mining

Super Vu-Tron Type G and Type G-GC Round ®

90ºC (UL), 2000 Volt Portable Power Cable

Product Construction:
Conductor:
• 8 AWG through 500 kcmil fully annealed stranded
bare copper
Insulation:
• Premium-grade, color-coded 90ºC EPDM
• Color code: See chart below
• Insulated grounds and ground checks
Jacket:
• Super Vu-Tron® 90ºC, black
• Temperature range: -40ºC to +90ºC 3 CONDUCTOR – TYPE G-GC – 2000 VOLT
Jacket Marking: NOMINAL YELLOW GREEN NOMINAL INS. NOMINAL
• TYPE G-GC (4/0 AND SMALLER) – NO. AWG COND. O.D. GROUND GROUND THICKNESS O.D. APPROX.
CAROL SUPER VU-TRON® SIZE (mm2) TYPE CATALOG OF OR COND. CHECK COND. CURR. NET WT.
G-GC PORTABLE POWER CABLE (UL) 2000 V NUMBER COND. kcmil STRAND INCHES mm AWG SIZE AWG SIZE INCHES mm INCHES mm AMPS LBS/M'(S)
(1)

DRY 90°C WET 75°C SUN RES P-7K-123049-

MSHA --- CSA TYPE G-GC (-40°C) 2 KV FT5 82313 3 8 133 0.160 4.06 10 2#10 0.060 1.52 0.965 24.51 65 600
MADE IN USA (TRU-MARK SEQUENTIAL
FOOTAGE) 82623 3 6 259 0.198 5.03 10 2#10 0.060 1.52 1.020 25.91 87 770
• TYPE G-GC (LARGER THAN 4/0) -
(SIZE) TYPE G-GC CAROL SUPER VU-TRON®
82643 3 4 259 0.245 6.22 10 2#8 0.060 1.52 1.125 28.58 114 1005
90°C DRY AND WATER RESISTANT 75°C 2000 82663 3 2 259 0.297 7.54 10 2#7 0.080 2.03 1.315 33.40 152 1480
V SUN RES (UL) P-7K-123049 MSHA LR27161
MADE IN USA (TRU-MARK SEQUENTIAL 82373 3 1 259 0.353 8.97 8 2#6 0.080 2.03 1.445 36.70 177 1815
FOOTAGE)
• TYPE G - 82383 3 1/0 259 0.385 9.78 8 2#5 0.080 2.03 1.570 39.88 205 2205
CAROL SUPER VU-TRON® SIZE (mm2) TYPE G
PORTABLE POWER CABLE (UL) 600/2000 V
82393 3 2/0 259 0.442 11.23 8 2#4 0.080 2.03 1.660 42.16 237 2545
DRY 90°C WET 75°C SUN RES P-7K-123049 82403 3 3/0 259 0.480 12.19 8 2#3 0.080 2.03 1.810 45.97 274 3230
MHSA --- CSA TYPE G (-40°C) 2 KV FT5 MADE
IN USA (TRU-MARK SEQUENTIAL FOOTAGE) 82413 3 4/0 259 0.555 14.10 8 2#2 0.080 2.03 1.920 48.77 316 3675
Applications: 82423 * 3(2)
250 627 0.615 15.62 8 2#2 0.095 2.41 2.390 60.71 352 6060
• Industrial and light- to medium-duty mining
(2)
applications 82443 * 3 350 855 0.725 18.42 8 2#1/0 0.095 2.41 2.680 68.07 433 7400
• Heavy-duty service as power supply cable (2)
• Mobile and portable electrical equipment 82473 * 3 500 1235 0.880 22.35 8 2#2/0 0.095 2.41 3.030 76.96 536 10100
• 3- and 4-conductor—use on three-phase AC
systems where grounding is required 4 CONDUCTOR – TYPE G – 600/2000 VOLT
Features: NOMINAL GREEN NOMINAL INS.
• Excellent impact and abrasion resistance NO. AWG COND. O.D. COND. THICKNESS NOMINAL O.D. APPROX.
• Withstands exposure to oil, acids, alkalies, heat, CATALOG OF OR COND. AWG CURRENT NET WT.
moisture and most chemicals NUMBER COND. kcmil STRAND INCHES mm SIZE INCHES mm INCHES mm AMPS LBS/M'(S)
(1)
• Suitable for immersion in water*
• Indent-printed for easy identification
• Rope lay stranding for maximum flex life
82314 4 8 133 0.160 4.06 4#12 0.060 1.52 1.045 26.54 52 690
• Cable core bound for superior flexibility and 82624 4 6 259 0.198 5.03 4#12 0.060 1.52 1.125 28.58 70 880
toughness
• Non-wicking rubber fillers (G-GC) 82644 4 4 259 0.245 6.22 4#10 0.060 1.52 1.225 31.12 91 1160
• Canadian color code available upon request
• Sunlight-resistant 82664 4 2 259 0.297 7.54 4#9 0.080 2.03 1.435 36.45 122 1720
• TRU-Mark® sequential footage marking
82374* 4 1 259 0.353 8.97 4#8 0.080 2.03 1.595 40.51 142 2200
Industry Approvals:
• UL Type G, G-GC 82384 4 1/0 259 0.385 9.78 4#7 0.080 2.03 1.730 43.94 164 2705
• CSA 82394 4 2/0 259 0.442 11.23 4#6 0.080 2.03 1.855 47.12 190 3190
• MSHA Approved
• RoHS Compliant 82404 4 3/0 259 0.480 12.19 4#5 0.080 2.03 2.040 51.82 219 4005
Packaging: 82414 4 4/0 259 0.555 14.10 4#4 0.080 2.03 2.145 54.48 253 4560
• Lengths cut to order
(1)
Ampacities based on 90°C conductor and 30°C ambient temperature per Table 400.5(A)(2) of the National Electrical Code®.
* Suitable for immersion in water if properly sealed and (2)
UL Listed and c(UL) Certified.
terminated.
* Non-stock item; minimum quantity purchase required.
(S)
Actual shipping weight may vary.
COLOR CODE CHART
NO. OF
CONDUCTORS COLOR
3 Black, White, Red
4 Black, White, Red, Orange

34
Mining Industrial-Grade Cable

Carolprene 105˚C Welding Cable ®

105˚C, 600 Volt, MSHA Approved

Product Construction:
Conductors:
• 6 AWG through 4/0 AWG fully annealed
stranded bare copper
Jacket:
• Carolprene® 105°C, black
• Temperature range: -50°C to +105°C
Jacket Marking:
• CAROLPRENE (SIZE) AWG 105°C WELDING
CAROLPRENE 105°C WELDING CABLE – 600 VOLT – 30 AWG STRANDING
®
CABLE 600 VOLT P-07-KA100015-MSHA MADE
IN USA (TRU-MARK SEQUENTIAL FOOTAGE)
NOMINAL O.D. APPROX.
CATALOG AWG NOMINAL NET WT. STD. Applications:
NUMBER SIZE STRAND INCHES mm LBS/M'(S) CTN. • Secondary voltage resistance welding leads in
heavy duty or mining applications
01758* 6 259/30 0.430 10.92 152 1000' • Power supply applications not exceeding 600
volts AC
01757* 4 416/30 0.475 12.07 215 1000' • Sizes 1/0 and larger for permanent wiring in
conduit or tray of 600 V power supplies, hoists,
01756* 2 655/30 0.540 13.72 296 1000' cranes or other applications where flexible power
01755* 1 827/30 0.580 14.73 360 1000' leads must be installed in conduit, raceways or
trays
01754* 1/0 1042/30 0.615 15.62 424 1000' Features:
01753* 2/0 1316/30 0.655 16.64 513 1000' • Water-resistant
• Sunlight-resistant
01752* 3/0 1660/30 0.720 18.29 644 1000' • Designed to withstand severe environmental
conditions
01751* 4/0 2062/30 0.780 19.81 824 1000' • Withstands exposure to oil, acids, alkalies, heat,
flame, moisture and chemicals
* Non-stock item; minimum quantity required.
• Meets or exceeds flame test requirements of
Actual shipping weight may vary.
(S)
MSHA
• TRU-Mark® marking system and indent printed
MSHA number
Industry Approvals:
• MSHA Approved
• RoHS Compliant

WELDING CABLE AMPACITIES Packaging:

• 250' (76.2 m), 1000' (304.8 m) reels
• Other put-ups available on special order

SINGLE CONDUCTOR
Required Cable Sizes: For Welding Cable Application Suggested Ampacities
For 600 Volt In-Line Applications
length in feet for total circuit for secondary voltages only – do not use this table for 600 Volt in-line applications
AWG AMPERES AWG AMPERES
AMPS 100' 150' 200' 250' 300' 350' 400'
100 4 4 2 2 1 1/0 1/0 4/0 405 1 220
150 4 2 1 1/0 2/0 3/0 3/0 3/0 350 2 190
200 2 1 1/0 2/0 3/0 4/0 4/0 2/0 300 4 140
250 1 1/0 2/0 3/0 4/0
1/0 260 6 105
300 1/0 2/0 3/0 4/0
Ampacities for portable cable in accordance with NEC Table
350 1/0 3/0 4/0 400.5(A)(2).
400 2/0 3/0 May not be suitable for all installations per National Electrical
Code®.
450 2/0 4/0
500 3/0 4/0
550 3/0 4/0
600 4/0 REQUIRED CABLE SIZES SHOWN IN AWG NUMBERS
The total circuit length includes both welding and ground leads (based on 4-volt drop) 60% duty cycle.
These values for current-carrying capacity are based on a copper temperature of 60°C (140°F), an ambient temperature
of 40°C (104°F) and yield load factors from approximately 32% for the No. 2 AWG cable to approximately 23% for
the No. 3/0 AWG cable, and higher for the smaller sizes. The sizes of cables generally used range from No. 2 AWG to
No. 3/0 AWG. In actual service, the load factor may be much higher than indicated without overheating the cable, as the
ambient temperature will generally be substantially lower than 40°C.

(01/2015) 35
Industrial-Grade Cable Mining
NOW RED
Carolprene 90°C Welding Cable ®
A STO
ITEM CK
600 Volt

Product Construction:
Conductor:
• 6 AWG through 500 kcmil fully annealed stranded
bare copper Class K
Jacket:
• Premium-grade 90ºC EPDM, black or red
• Temperature range: -40ºC to +90ºC
Jacket Marking:
• CAROLPRENE (SIZE) WELDING CABLE 600
VOLT MADE IN USA (TRU-MARK SEQUENTIAL CAROLPRENE® WELDING CABLE – 600 VOLT – CLASS K – 30 AWG STRANDING
FOOTAGE)
NOMINAL O.D. APPROX.
Applications: CATALOG AWG OR CONDUCTOR NET WT. STD.
• Secondary voltage resistance welding leads NUMBER kcmil STRAND INCHES mm LBS/M'(S) CTN.
• Power supply applications not exceeding 600
volts AC 01778 6 259/30 0.380 9.65 135 250'
Features: 01777 4 406/30 0.400 10.16 172 250'
• Good flexibility
• Abrasion-resistant 01776 2 646/30 0.465 11.81 260 250'
• Good color retention
• TRU-Mark® sequential footage marking 01775 1 812/30 0.495 12.57 317 250'
Packaging: 01774 1/0 1025/30 0.560 14.22 400 250'
• 250' (76.2 m), 500' (152.4 m), and 1000' (304.8 m)
reels 01773 2/0 1274/30 0.615 15.62 487 250'
• MCM sizes cut to length
• Other put-ups available on special order
01772 3/0 1613/30 0.670 17.02 605 250'

Industry Approvals: 01771 4/0 2029/30 0.750 19.05 827 250'

• RoHS Compliant 99142* 250 kcmil 2496/30 0.830 21.08 976 250'
99432* 350 kcmil 3441/30 0.960 24.38 1338 250'
Suggested Ampacities 99202* 500 kcmil 5054/30 1.200 30.48 1995 250'
For 600 Volt In-Line Applications (S)
Actual shipping weight may vary.

AWG OR kcmil AMPERES AWG AMPERES * Non-stock item; minimum quantity required.

500 kcmil 695 1/0 190

350 kcmil 552 1 160 WELDING CABLE AMPACITIES
250 kcmil
4/0
445
310
2
4
140
100
SINGLE CONDUCTOR
3/0 265 6 75 Required Cable Sizes: For Welding Cable Application
2/0 223
length in feet for total circuit for secondary voltages only – do not use this table for 600 Volt in-line applications
Ampacities for portable cable, continuous-duty
(ambient temperature of 40°C). AMPS 100' 150' 200' 250' 300' 350' 400'
May not be suitable for all installations per 100 4 4 2 2 1 1/0 1/0
National Electrical Code®.
150 4 2 1 1/0 2/0 3/0 3/0
200 2 1 1/0 2/0 3/0 4/0 4/0
250 1 1/0 2/0 3/0 4/0
Ordering Part Number Example
300 1/0 2/0 3/0 4/0
01771.38.03 350 1/0 3/0 4/0
4/0 500' put-up in red 400 2/0 3/0
.03 for red jacket 450 2/0 4/0
500 3/0 4/0
550 3/0 4/0
600 4/0 REQUIRED CABLE SIZES SHOWN IN AWG NUMBERS
The total circuit length includes both welding and ground leads (based on 4-volt drop) 60% duty cycle.
These values for current-carrying capacity are based on a copper temperature of 60°C (140°F), an ambient temperature
of 40°C (104°F) and yield load factors from approximately 32% for the No. 2 AWG cable to approximately 23% for
the No. 3/0 AWG cable, and higher for the smaller sizes. The sizes of cables generally used range from No. 2 AWG to
No. 3/0 AWG. In actual service, the load factor may be much higher than indicated without overheating the cable, as the
ambient temperature will generally be substantially lower than 40°C.

36
Mining Industrial-Grade Cable

Super Vu-Tron Welding Cable ®

90ºC, 600 Volt, UL /CSA, RHH/RHW

Product Construction:
Conductor:
• 6 AWG through 4/0 AWG fully annealed stranded
bare copper per ASTM B172 Class M
Jacket:
• Super Vu-Tron®, orange
• Temperature range: -50ºC to +90ºC
Jacket Marking:
®
• #6 - #1 AWG: CAROL SUPER VU-TRON®
SUPER VU-TRON WELDING CABLE—UL/CSA—CLASS M—34 AWG STRANDING WELDING CABLE–EXTRA FLEXIBLE (UL)
600 VOLT (-50°C to +90°C) OIL RESISTANT
NOMINAL O.D. APPROX. P-123-141 MSHA (SIZE) --- CSA 90°C ARC
CATALOG AWG CONDUCTOR NET WT. STD. WELDING CABLE FT1 MADE IN USA
NUMBER SIZE STRAND INCHES mm LBS/M'(S) CTN. (TRU-MARK SEQUENTIAL FOOTAGE)
• 1/0 - 4/0 AWG: CAROL SUPER VU-TRON®
01768* 6 660/34 0.370 9.40 125 250' WELDING CABLE (SIZE) EXTRA FLEXIBLE (UL)
600 VOLT (-50°C to +90°C) OIL RESISTANT
01767* 4 1045/34 0.415 10.54 191 250' P-123-141 MSHA --- CSA 90°C ARC WELDING
01766 2 1634/34 0.475 12.07 259 250' CABLE FT1 --- TYPE RHH OR RHW (UL)
600 V FOR CT USE MADE IN USA (TRU-MARK
01765 1 2090/34 0.530 13.46 331 250' SEQUENTIAL FOOTAGE)

01764† 1/0 2597/34 0.575 14.61 401 250' Applications:

• Secondary voltage resistance welding leads
01763† 2/0 3300/34 0.630 16.00 511 250' • Power supply applications not exceeding
600 volts AC
01762† 3/0 4214/34 0.700 17.78 615 250' • Sizes 1/0 and larger for permanent wiring
in conduit or tray of 600 V power supplies, hoists,
01761† 4/0 5225/34 0.800 20.32 844 250'
cranes or other applications where flexible power
*Not MSHA approved. leads must be installed in conduit, raceways or
(S)
Actual shipping weight may vary. trays
† Type RHH/RHW - 600 V for CT use.
Features:
• UL Listed
• CSA Certified
• Excellent flexibility to last longer in flex
applications
• Abrasion-resistant
• Resists oils and solvents
WELDING CABLE AMPACITIES • Rated -50ºC for use in cold environments
• Weather-resistant
• Ozone-resistant
SINGLE CONDUCTOR • Safety-colored for high visibility
• Assured longer service life, saving money
Required Cable Sizes: For Welding Cable Application in replacement costs, maintenance cost
and downtime
• MSHA Approved for flame resistance
length in feet for total circuit for secondary voltages only – do not use this table for 600 Volt in-line applications • Sunlight-resistant
• TRU-Mark® sequential footage marking
AMPS 100' 150' 200' 250' 300' 350' 400'
100 4 4 2 2 1 1/0 1/0 Industry Approvals:
• UL Listed
150 4 2 1 1/0 2/0 3/0 3/0 • CSA Certified
200 2 1 1/0 2/0 3/0 4/0 4/0 • MSHA Approved
250 1 1/0 2/0 3/0 4/0 • Meets UL Vertical Flame Test per UL 854
• RoHS Compliant
300 1/0 2/0 3/0 4/0
350 1/0 3/0 4/0 Packaging:
• 250' (76.2 m), 500' (152.4 m), and 1000' (304.8 m)
400 2/0 3/0 reels
450 2/0 4/0 • Other put-ups available on special order
500 3/0 4/0
550 3/0 4/0 Suggested Ampacities
600 4/0 REQUIRED CABLE SIZES SHOWN IN AWG NUMBERS For 600 Volt In-Line Applications
The total circuit length includes both welding and ground leads (based on 4-volt drop) 60% duty cycle.
AWG AMPERES AWG AMPERES
These values for current-carrying capacity are based on a copper temperature of 60°C (140°F), an ambient temperature of
40°C (104°F) and yield load factors of from approximately 32% for the No. 2 AWG cable to approximately 23% for the 4/0 405 1 220
No. 3/0 AWG cable, and higher for the smaller sizes. The sizes of cables generally used range from No. 2 AWG to 3/0 350 2 190
No. 3/0 AWG. In actual service, the load factor may be much higher than indicated without overheating the cable as the
ambient temperature will generally be substantially lower than 40°C. 2/0 300 4 140
1/0 260 6 105
Appendix J Ampacities for portable cable in accordance with
NEC Table 400.5(A)(2).
May not be suitable for all installations per National Electrical
Code ®.

37
Industrial-Grade Cable Mining

Super Vu-Tron Single Conductor Type W Extra Flex

®

90ºC, 2000 Volt, UL Listed

Product Construction:
Conductor:
• 8 AWG through 250 kcmil fully annealed stranded
bare copper per ASTM B172
Insulation:
• Premium-grade 90ºC EPDM
Jacket:
• Super Vu-Tron® 90ºC, black (standard)
Other Available Colors:
– Gray, red, orange, yellow, green, blue TYPE W - 2000 VOLT - UL
– See color code chart
NOMINAL NOMINAL INS.
• Temperature range: -40ºC to +90ºC APPROX.
COND. O.D. THICKNESS NOMINAL O.D.
• An open polyester braid reinforcement is applied CATALOG AWG OR NOMINAL NET WT. CURRENT
between the insulation and jacket for mechanical NUMBER kcmil STRAND INCHES mm INCHES mm INCHES mm LBS/M'(S) AMPS (1)
strength
Jacket Marking: 80611* 8 168/30 0.165 4.19 0.060 1.52 0.440 11.18 149 80
• CAROL SUPER VU-TRON® TYPE W PORTABLE
POWER CABLE (SIZE) 2000 V 90°C DRY AND
80621* 6 259/30 0.198 5.03 0.060 1.52 0.530 13.46 205 105
WATER RESISTANT 75°C SUN RES (UL) P-7K- 80631* 4 416/30 0.233 5.92 0.060 1.52 0.585 14.86 264 140
123049-MSHA---CSA TYPE W (-40°C) FT5
(TRU-MARK SEQUENTIAL FOOTAGE) 80641 2 655/30 0.293 7.44 0.070 1.78 0.650 16.51 370 190
• Custom print available by special order with
minimum quantity purchase 80651* 1 827/30 0.330 8.38 0.090 2.29 0.730 18.54 479 220
Applications: 80661* 1/0 1042/30 0.369 9.37 0.090 2.29 0.750 19.05 535 260
• Portable power systems
• Entertainment industry activities such as theater, 80671* 2/0 1316/30 0.412 10.46 0.090 2.29 0.825 20.96 653 300
television, nightclubs, motion pictures, mobile 80681* 3/0 1660/30 0.490 12.45 0.090 2.29 0.855 21.72 755 350
communication vans, spotlights and sound
systems 80691 4/0 2062/30 0.530 13.46 0.090 2.29 0.980 24.89 1056 405
• Other similar applications that would require
temporary power 80701* 250 kcmil 2496/30 0.606 15.39 0.105 2.67 1.000 25.40 1150 455
Features: (1)
Ampacities based on 90°C conductor and 30°C ambient temperature, based on Table 310-17 and Table 400.5(A)(2) in
• Water-resistant the National Electrical Code for single conductor cables.
• Sunlight-resistant * Non-stock item; minimum quantity purchase required.
(S)
• Designed to withstand severe environmental Actual shipping weight may vary.
conditions
• Flexible and easier to work with in cold
temperatures ORDERING INFORMATION
• Withstands exposure to oil, acids, alkalies, heat, Three easy steps to ordering your Super Vu-Tron Type W Extra Flex Cable:
flame, moisture and chemicals
• No “memory” effect when coiling and uncoiling
Catalog Number Put-Up Code Color Code
for use
• Meets or exceeds flame test requirements of
Choose Catalog Choose Put-Up Code Choose Color
MSHA and UL
• TRU-Mark® sequential footage marking Number from from Packaging Code from the
Catalog Table Information Color
Industry Approvals: above (99 for cut-to-order – Code Chart
• UL Listed
please specify length
• MSHA Approved
needed)
• RoHS Compliant
(41 for 1000 ft reel
• CSA Certified
put-up size)
Packaging: COLOR CODE CHART Examples:
• Lengths cut to order (99 put-up code) 80691.41.01 Type W Extra Flex, 4/0 size, 1,000 ft. reel put-up, black
• 1000' reel (41 put-up code) COLOR COLOR CODE
80691.99.17 Type W Extra Flex, 4/0 size, long-length reel put-up, blue
Black 01 Make It Yours: Custom print legends available for recurring stock
Gray 10 and special orders - ask for details

Red 03
Orange 04
Yellow 05
Green 06
Blue 17

38
Mining Rubber Cord Products

Carol Brand Rubber Cord Products

®
3

Index Page

Carol® Double Jacket

Drill Cord 40

Super Vu-Tron® Supreme

Types SJOOW/SOOW 41
Thermoset rubber cord Our rubber cord products
products have evolved during carry a full range of listings and Carolprene® Jacketed
Type SOOW 42
the last 50 years from simple certifications with Underwriters
and unsophisticated to a Laboratories, Inc. and the
Carolprene® Jacketed
product line where specialized, Canadian Standard Association. Type SJOOW 43
technologically advanced In addition, many products meet
products are in demand for or exceed the requirements of Carolprene® Jacketed
exacting commercial and OSHA, MSHA and other relevant Type SOOW, Non-UL 44
industrial applications. industry standards.
Super Vu-Tron®
No longer are rubber cord The Carol® Brand is simply the Multi-Conductor
products used only in most accepted in the industry, Type SOOW 45-46
applications where flexibility having proven itself on the job
is needed; today, typical time after time. Our rubber cord
applications require cord to line is the most comprehensive
perform well in environments of in the industry, ensuring that the
extreme heat and cold, and on proper Carol® Brand product can
job sites and factory floors where always be specified.
resistance to oil, chemicals and
abrasion is mandatory.
General Cable’s role as the
producer of premier Carol® Brand
rubber cord products is to ensure
that new product development,
product innovation and quality
not only keep pace with industry
requirements, but also set the
trends.

39
Rubber Cord Products Mining

Carol Double Jacket Drill Cord

®

90˚C, 600 Volt, MSHA Approved Remote Control & Drill Cord

Product Construction:
Conductors:
• 14 through 10 AWG fully annealed stranded bare
copper
• ASTM B3/B174
Insulation
• Premium-grade, color-coded 90˚C EPDM
• Color code: See chart below
Jacket Applications: Features:
• 90˚C, black, CPE or neoprene • Industrial and light- to medium-duty mining • Withstands severe environmental conditions
• Temperature range: -40°C to +90°C applications • Indent-printed for easy identification
• An open polyester braid reinforcement is applied • Heavy-duty service as power supply cable • Withstands exposure to oil, acids, alkalies, heat,
between layers for mechanical strength • AC systems (grounded and ungrounded) moisture and most chemicals
• Heavy-duty and long service life applications • Flexible stranding
Jacket Marking • Mobile and portable electrical equipment • Excellent impact, crush and tear resistance
• CPE jacket - • Motor and battery leads • Sunlight-resistant
CAROL (SIZE & NO. OF CONDS.) DOUBLE • Wet or dry locations in underground mines in • Reinforced jacket for increased durability
JACKET REMOTE CONTROL AND DRILL CORD accordance with Schedule 26 of the U.S. Bureau • TRU-Mark® sequential footage marking
600 V 90°C P-07-KA110003-MSHA MADE IN USA of Mines
• Neoprene jacket - • 3-conductor cables – use on AC systems where
Industry Approvals:
CAROL (SIZE & NO. OF CONDS.) NEOPRENE no grounding is required or on DC systems with • RoHS Compliant
DOUBLE JACKET REMOTE CONTROL AND one conductor for grounding • Passes MSHA Flame Test
DRILL CORD 600 V 90°C P-07-KA110006-MSHA • 4-conductor cables – use on two- or three- • Additional rating available upon request
MADE IN USA phase AC systems with one conductor used for • Other sizes and numbers of conductors available
grounding upon request
• 5-conductor cables – use in applications where Applicable Standards:
separating the system neutral from the frame • ICEA S-75-381
ground is required
Packaging:
• Lengths cut to order
COLOR CODE CHART
NO. OF NOMINAL NOMINAL INS.
CONDUCTORS COLOR** COND. O.D. THICKNESS NOMINAL O.D. APPROX.
CATALOG NO. OF AWG COND. CURRENT NET WT.
2 Black, White NUMBER COND. SIZE STRAND INCHES mm INCHES mm INCHES mm AMPS LBS/M'(S)
(1)

3 Black, White, Green CPE JACKET

4 Black, White, Red, Green 02861 2 14 41/30 0.072 1.96 0.045 1.14 0.640 16.26 18 210
5 Black, White, Red, Green, Orange 02862 3 14 41/30 0.072 1.96 0.045 1.14 0.670 17.02 18 240
6 Black, White, Red, Green, Orange, 02868 4 14 41/30 0.072 1.96 0.045 1.14 0.715 18.16 15 285
Blue
02835 5 14 41/30 0.072 1.96 0.045 1.14 0.785 19.94 12 345
** Green conductor for grounding only.
02845 5 12 65/30 0.096 2.44 0.045 1.14 0.840 21.34 16 405
02806 6 12 65/30 0.096 2.44 0.045 1.14 0.890 22.61 16 470
02855 5 10 104/30 0.117 2.97 0.045 1.14 0.895 22.73 20 495
NEOPRENE JACKET
02961* 2 14 41/30 0.072 1.96 0.045 1.14 0.640 16.26 18 220
02962* 3 14 41/30 0.072 1.96 0.045 1.14 0.670 17.02 18 260
02968* 4 14 41/30 0.072 1.96 0.045 1.14 0.715 18.16 15 300
02935* 5 14 41/30 0.072 1.96 0.045 1.14 0.785 19.94 12 365
02945* 5 12 65/30 0.096 2.44 0.045 1.14 0.840 21.34 16 425
02906* 6 12 65/30 0.096 2.44 0.045 1.14 0.890 22.61 16 490
02955* 5 10 104/30 0.117 2.97 0.045 1.14 0.895 22.73 20 515
* Non-stock item; minimum quantity purchase required.
(1)
Ampacities based on 90°C conductor and 30°C ambient temperature per NEC Table 400.5(A)(1) of the National Electrical Code®.
(S)
Actual shipping weight may vary.

40
Mining Rubber Cord Products

Super Vu-Tron Supreme Types SJOOW/SOOW ®

105ºC, 300 and 600 Volt, UL /CSA Portable Cord

Product Construction:
Conductors:
• 18 through 10 AWG fully annealed stranded
tinned copper
Insulation:
• Premium-grade, color-coded, oil-resistant 105ºC
EPDM
• Color code: See chart below
TYPE SJOOW – 300 VOLT – UL/CSA Jacket:
• Super Vu-Tron® Supreme, yellow
NOM. INS. JACKET • Temperature range:
THICKNESS NOMINAL O.D. APPROX. COPPER
CATALOG NO. OF AWG COND. STRAND CURRENT NET WT. WT. STD. –50ºC to +105ºC UL/CSA
NUMBER COND. SIZE STRAND O.D. INCHES mm INCHES mm AMPS †
LBS/M'(S) LBS/M' CTN. • Voltage rating:
300 volts Type SJOOW
02601 2 18 41/34 .048" 0.030 0.76 0.310 7.87 10 56 10 1000' 600 volts Type SOOW
02602 3 18 41/34 .048" 0.030 0.76 0.320 8.13 10 66 15 1000' Jacket Marking:
02603 4 18 41/34 .048" 0.030 0.76 0.345 8.76 7 79 20 250' • SUPER VU-TRON® SUPREME SJOOW -
CAROL SUPER VU-TRON® SUPREME (SIZE)
02604 2 16 65/34 .057" 0.030 0.76 0.315 8.00 13 62 16 1000' (mm2) 105°C (UL) WATER RESISTANT SJOOW
02605 3 16 65/34 .057" 0.030 0.76 0.335 8.51 13 77 24 250' CSA (-50°C) FT1 --- P-07-KA120015-MSHA
300 VOLT ROHS MADE IN USA (TRU-MARK
02606 4 16 65/34 .057" 0.030 0.76 0.370 9.40 10 98 32 250' SEQUENTIAL FOOTAGE)
02607 2 14 105/34 .077" 0.030 0.76 0.370 9.40 18 75 24 250' • SUPER VU-TRON® SUPREME SOOW -
CAROL SUPER VU-TRON® SUPREME (SIZE)
02608 3 14 105/34 .077" 0.030 0.76 0.375 9.53 18 99 36 250' (mm2) 105°C (UL) WATER RESISTANT SOOW
02609 4 14 105/34 .077" 0.030 0.76 0.405 10.29 15 122 48 250' CSA (-50°C) FT1 --- P-07-KA120015-MSHA
600 VOLT ROHS MADE IN USA (TRU-MARK
TYPE SOOW – 600 VOLT – UL/CSA SEQUENTIAL FOOTAGE)
NOM. INS. JACKET Applications:
THICKNESS NOMINAL O.D. APPROX. COPPER • Machine tools
CATALOG NO. OF AWG COND. CURRENT NET WT. WT. STD. • Power tools
NUMBER COND. SIZE STRAND INCHES mm INCHES mm AMPS† LBS/M'(S) LBS/M' CTN. • Dockside power applications
• Motor leads
02631* 2 18 41/34 0.030 0.76 0.365 9.27 10 75 10 250' • Portable machinery
02632 3 18 41/34 0.030 0.76 0.375 9.53 10 84 15 250' • Cranes
02633* 4 18 41/34 0.030 0.76 0.400 10.16 7 110 21 250' • Submersible pumps
• Where water immersion is required
02634 2 16 65/34 0.030 0.76 0.370 9.40 13 80 16 250' • Severe environment OEM/MRO applications
02635 3 16 65/34 0.030 0.76 0.395 10.03 13 96 24 250' Features:
02636 4 16 65/34 0.030 0.76 0.425 10.80 10 118 32 250' • Excellent flexibility in cold temperatures
02621 5 16 65/34 0.030 0.76 0.515 13.08 8 166 40 250' • Lasts longer in flex applications (extra-flexible
Class M stranding)
02637* 2 14 105/34 0.045 1.14 0.510 12.95 18 153 24 250' • Integral Flexfill®
02638 3 14 105/34 0.045 1.14 0.525 13.34 18 164 36 250' • Ozone-, sunlight (UV)- and weather-resistant
• UL Listed and CSA Certified for indoor and
02639 4 14 105/34 0.045 1.14 0.575 14.61 15 204 48 250'
outdoor use
02622* 5 14 105/34 0.045 1.14 0.675 17.15 12 279 60 250' • Water-resistant*
• Safety-colored, with high-visibility yellow jacket
02641* 2 12 168/34 0.045 1.14 0.590 14.99 25 198 38 250' • High heat and flame resistance
02642 3 12 168/34 0.045 1.14 0.600 15.24 25 224 57 250' • Resistant to sunlight, oils, acids and chemicals
02643 4 12 168/34 0.045 1.14 0.650 16.51 20 270 76 250' • Excellent abrasion and cut resistance
02623* 5 12 168/34 0.045 1.14 0.730 18.54 16 308 96 250' • TRU-Mark® sequential footage marking
• Tinned copper conductors — corrosion/
02645 3 10 259/34 0.045 1.14 0.660 16.76 30 295 99 250' oxidation-resistant
02646 4 10 259/34 0.045 1.14 0.710 18.03 25 365 132 250' Industry Approvals:
02624* 5 10 259/34 0.045 1.14 0.770 19.56 20 422 168 250' • UL Flexible Cord - UL 62
• CSA Flexible Cord - C22.2-49
* Non-stock item; minimum quantity purchase required.
• MSHA Approved
TOP PERFORMANCE IN THE TOUGHEST ENVIRONMENTS † Green conductor for grounding only. Ampacities based on
• OSHA Acceptable
NEC Table 400.5(A)(1).
Volume change (%) of SUPER VU-TRON® SUPREME after 28 days (S)
• RoHS Compliant
Actual shipping weight may vary.
at room temperature in the following materials
ACETIC ACID (30%) +19.00 LINSEED OIL +1.04 COLOR CODE CHART Packaging:
AMMONIA HYDROXIDE +3.12 LUBE OIL -1.82 • 250' (76.2 m), 500' (152.4 m),
ASTM 3 OIL +0.26 MILK +4.16 NO. OF 1000' (304.8 m)
BEER +4.42 NITRIC ACID (10%) +7.29 CONDUCTORS COLOR • Other put-ups available on special order
BLEACH WATER +2.60 SAE 30 OIL -1.30
BUTYL ALCOHOL -1.82 SKYDROL 500 +17.10 * Suitable for immersion in water if properly sealed and
CORN OIL 0.00 SODIUM HYDROXIDE +10.90
2 Black, White
terminated.
FORMALDEHYDE
GLYCOL (ANTI-FREEZE)
+3.38
-2.60
SULFURIC ACID (10%)
TOLUENE
+2.34
+30.20
3 Black, White, Green/Yellow
HYDROCHLORIC ACID (20%) +10.60 UNLEADED GAS +22.10 4 Black, White, Red, Green/Yellow
JP-4 +10.90 WATER +2.86
KEROSENE +10.60 5 Black, White, Red, Green/Yellow, Orange

41
Rubber Cord Products Mining

Carolprene Jacketed Type SOOW ®

90ºC, 600 Volt, UL /CSA Portable Cord

Product Construction:
Conductors:
• 18 through 2 AWG fully annealed stranded bare
copper
Insulation:
• Premium-grade, color-coded 90ºC EPDM
• Color code: See chart below
Jacket:
• Carolprene®, black
• Temperature range: -40ºC to +90ºC TYPE SOOW – 600 VOLT – UL/CSA
Jacket Marking: NOMINAL INS.
THICKNESS NOMINAL O.D. APPROX.
• CAROL (SIZE) (mm2) 90°C (UL) WATER CATALOG NO. OF AWG COND. CURRENT NET WT. STD.
RESISTANT SOOW CSA (-40°C) FT2 NUMBER COND. SIZE STRAND INCHES mm INCHES mm AMPS †
LBS/M'(S) CTN.
P-7K-123033 MSHA 600 VOLT ROHS
MADE IN USA (TRU-MARK SEQUENTIAL 02763 2 18 16/30 0.030 0.76 0.345 8.76 10 65 250'
FOOTAGE)
Applications: 02769 3 18 16/30 0.030 0.76 0.365 9.27 10 80 250'
• Portable tools and equipment 02770 4 18 16/30 0.030 0.76 0.390 9.91 7 94 250'
• Portable appliances
• Small motors and associated machinery
02722 2 16 26/30 0.030 0.76 0.370 9.40 13 77 250'
Features:
• Excellent resistance to oil and moisture 02765 3 16 26/30 0.030 0.76 0.390 9.91 13 94 250'
• Good tensile strength, elongation and aging
characteristics
02766 4 16 26/30 0.030 0.76 0.420 10.67 10 114 250'
• High flexibility
• Excellent abrasion resistance 02723 2 14 41/30 0.045 1.14 0.510 12.95 18 154 250'
• Water-resistant*
• UL Listed and CSA Certified for indoor and
02762 3 14 41/30 0.045 1.14 0.535 13.59 18 171 250'
outdoor use 02768 4 14 41/30 0.045 1.14 0.575 14.61 15 209 250'
• Ozone-, sunlight (UV)- and weather-resistant
• TRU-Mark® sequential footage marking
02724 2 12 65/30 0.045 1.14 0.570 14.48 25 168 250'
Industry Approvals:
• UL Flexible Cord - UL 62 02725 3 12 65/30 0.045 1.14 0.595 15.11 25 223 250'
• CSA Flexible Cord - C22.2-49
• MSHA Approved
02726 4 12 65/30 0.045 1.14 0.650 16.51 20 276 250'
• RoHS Compliant
02767 2 10 104/30 0.045 1.14 0.620 15.75 30 230 250'
Packaging:
• 250' (76.2 m), 500' (152.4 m), 02728 3 10 104/30 0.045 1.14 0.660 16.76 30 289 250'
1000' (304.8 m)
• Other put-ups available on special order 02727 4 10 104/30 0.045 1.14 0.715 18.16 25 351 250'
* Suitable for immersion in water if properly sealed and
terminated. 16063 3 8 133/29 0.060 1.52 0.840 21.33 40 450 250'
16064 4 8 133/29 0.060 1.52 0.945 24.00 35 580 250'
COLOR CODE CHART
16065 5 8 133/29 0.060 1.52 1.030 26.16 28 700 250'
NO. OF
CONDUCTORS COLOR 16073 3 6 133/27 0.060 1.52 0.980 24.89 55 637 250'
2 Black, White 16074 4 6 133/27 0.060 1.52 1.080 27.43 45 830 250'
3 Black, White, Green 16075 5 6 133/27 0.060 1.52 1.200 30.48 36 1015 250'
4 Black, White, Red, Green
16083 3 4 133/25 0.060 1.52 1.140 28.96 70 926 250'
5 Black, White, Red, Green, Orange
16084 4 4 133/25 0.060 1.52 1.260 32.00 60 1145 250'
16085 5 4 133/25 0.060 1.52 1.365 34.67 48 1419 250'

16093 3 2 133/23 0.060 1.52 1.330 33.78 95 1367 250'

16094 4 2 133/23 0.060 1.52 1.460 37.08 80 1699 250'
16095* 5 2 133/23 0.060 1.52 1.580 40.13 64 2066 250'
Cord furnished with UL and CSA labels.
* Non-stock item; minimum quantity purchase required.
† Green conductor for grounding only. Ampacities based on NEC Table 400.5(A)(1).
(S)
Actual shipping weight may vary.

42
Mining Rubber Cord Products

Carolprene Jacketed Type SJOOW ®

90ºC, 300 Volt, UL /CSA Portable Cord

Product Construction:
Conductors:
• 18 through 10 AWG fully annealed stranded bare
copper
Insulation:
• Premium-grade, color-coded 90ºC EPDM
• Color code: See chart below
Jacket:
• Carolprene®, black
TYPE SJOOW – 300 VOLT – UL/CSA • Temperature range: -40ºC to +90ºC
NOMINAL INS. Jacket Marking:
THICKNESS NOMINAL O.D. APPROX.
CATALOG NO. OF AWG COND. CURRENT NET WT. STD. • CAROL (SIZE) (mm2) 90°C (UL) WATER
NUMBER COND. SIZE STRAND INCHES mm INCHES mm AMPS †
LBS/M'(S) CTN. RESISTANT SJOOW CSA (-40°C) FT2
P-7K-123033 MSHA 300 VOLT ROHS
01310 2 18 16/30 0.030 0.76 0.285 7.24 10 46 1000' MADE IN USA (TRU-MARK SEQUENTIAL
FOOTAGE)
01311 3 18 16/30 0.030 0.76 0.305 7.75 10 60 1000' Applications:
01344 4 18 16/30 0.030 0.76 0.330 8.38 7 72 250' • Portable tools and equipment
• Portable appliances
• Small motors and associated machinery
01312 2 16 26/30 0.030 0.76 0.310 7.87 13 56 1000'
Features:
01342 3 16 26/30 0.030 0.76 0.330 8.38 13 72 250' • Excellent resistance to oil and moisture
• Good tensile strength, elongation and aging
01343 4 16 26/30 0.030 0.76 0.365 9.27 10 89 250'
characteristics
• High flexibility
01358 2 14 41/30 0.030 0.76 0.340 8.64 18 75 250' • Excellent abrasion resistance
• Water-resistant*
01360 3 14 41/30 0.030 0.76 0.370 9.40 18 100 250' • UL Listed and CSA Certified for indoor and
01364 4 14 41/30 0.030 0.76 0.410 10.41 15 128 250' outdoor use
• Ozone-, sunlight (UV)- and weather-resistant
• TRU-Mark® sequential footage marking
01379 2 12 65/30 0.030 0.76 0.410 10.41 25 108 250'
Industry Approvals:
01380 3 12 65/30 0.030 0.76 0.430 10.92 25 136 250' • UL Flexible Cord - UL 62
• CSA Flexible Cord - C22.2-49
01381 4 12 65/30 0.030 0.76 0.475 12.07 20 177 250'
• MSHA Approved
• RoHS Compliant
01382* 2 10 104/30 0.045 1.14 0.560 14.22 30 190 250'
Packaging:
01383 3 10 104/30 0.045 1.14 0.580 14.73 30 236 250' • 250' (76.2 m), 500' (152.4 m),
1000' (304.8 m)
01384 4 10 104/30 0.045 1.14 0.655 16.64 25 296 250' • Other put-ups available on special order
Cord furnished with UL and CSA labels. * Suitable for immersion in water if properly sealed and
* Non-stock item; minimum quantity purchase required. terminated.
† Green conductor for grounding only. Ampacities based on NEC Table 400.5(A)(1).
(S)
Actual shipping weight may vary. COLOR CODE CHART
NO. OF
CONDUCTORS COLOR
2 Black, White
3 Black, White, Green
4 Black, White, Red, Green

43
Rubber Cord Products Mining

Carolprene Jacketed Type SOOW ®

90ºC, 600 Volt, Non-UL Portable Cord

Product Construction:
Conductors:
• 8 through 2 AWG fully annealed stranded bare
copper
Insulation:
• Premium-grade, color-coded 90ºC EPDM
• Color code: See chart below
Jacket:
• Carolprene®, black
• Temperature range: -40ºC to +90ºC TYPE SOOW, NON-UL – 600 VOLT
Jacket Marking: NOMINAL INS.
THICKNESS NOMINAL O.D. APPROX.
• CAROL (SIZE) TYPE SOOW 90°C P-7K-123033 CATALOG NO. OF AWG COND. CURRENT NET WT. STD.
MSHA 600 VOLT ROHS MADE IN USA NUMBER COND. SIZE STRAND INCHES mm INCHES mm AMPS †
LBS/M'(S) CTN.
Applications:
• Portable tools and equipment 01811* 2 8 65/26 0.050 1.27 0.660 16.76 40 278 250'
• Temporary and portable power
• Motors and associated machinery
01812 3 8 65/26 0.050 1.27 0.695 17.65 40 343 250'

Features: 01827 4 8 65/26 0.050 1.27 0.760 19.30 35 442 250'

• Excellent resistance to oil and moisture 98267 5 8 65/26 0.050 1.27 0.840 21.34 28 542 250'
• Good tensile strength, elongation and aging
characteristics
• High flexibility 01825 3 6 101/26 0.050 1.27 0.790 20.07 55 482 250'
• Excellent abrasion resistance
• Ozone-, sunlight (UV)- and weather-resistant
01824 4 6 101/26 0.050 1.27 0.865 21.97 45 599 250'
• Water-resistant* 98270 5 6 101/26 0.050 1.27 0.945 24.00 36 750 250'
Industry Approvals:
• MSHA Approved 01823* 2 4 119/25 0.050 1.27 0.870 22.09 70 515 250'
• RoHS Compliant
01822 3 4 119/25 0.050 1.27 0.925 23.49 70 683 250'
Packaging:
• 250' (76.2 m), 500' (152.4 m), 01821 4 4 119/25 0.050 1.27 1.015 25.78 60 851 250'
1000' (304.8 m)
• Other put-ups available on special order
98463 5 4 119/25 0.050 1.27 1.115 28.32 48 1039 250'
* Suitable for immersion in water if properly sealed and
terminated. 01819 3 2 133/.0211 0.055 1.40 1.085 27.56 95 1003 250'
01818 4 2 133/.0211 0.055 1.40 1.170 29.72 80 1248 250'
COLOR CODE CHART
98187 5 2 133/.0211 0.055 1.40 1.390 35.31 64 1684 250'
NO. OF
CONDUCTORS COLOR * Non-stock item; minimum quantity purchase required.
† Green conductor for grounding only. Ampacities based on NEC Table 400.5(A)(1).
2 Black, White (S)
Actual shipping weight may vary.

3 Black, White, Green

4 Black, White, Red, Green
5 Black, White, Red, Green, Orange

44
Mining Rubber Cord Products

Super Vu-Tron Multi-Conductor Type SOOW ®

90ºC, 600 Volt, UL /CSA Portable Cord

Product Construction:
Conductors:
• 18 and 16 AWG fully annealed stranded bare
copper
Insulation:
• Premium-grade, color-coded 90ºC EPDM
• Color code: See chart below
Jacket:
• Super Vu-Tron® 90ºC, black
TYPE S00W – 600 VOLT – UL/CSA • Temperature range: -40ºC to +90ºC
NOMINAL INS. Jacket Marking:
THICKNESS NOMINAL O.D. APPROX.
CATALOG NO. OF AWG COND. CURRENT NET WT. • CAROL SUPER VU-TRON® (SIZE) (mm2) 90°C
NUMBER COND. SIZE STRAND INCHES mm INCHES mm AMPS† LBS/M'(S) (UL) WATER RESISTANT SOOW CSA (-40°C)
FT2 P-7K-123033 MSHA 600 VOLT ROHS
09805 5 18 16/30 0.030 0.76 0.465 11.81 5.6 131 MADE IN USA
09806 6 18 16/30 0.030 0.76 0.495 12.57 5.6 142 Applications:
09807 7 18 16/30 0.030 0.76 0.520 13.21 5.6 161 • Control circuits
• Tools
09808 8 18 16/30 0.030 0.76 0.530 13.46 4.9 173
• Heavy industrial, processing and construction
09810 10 18 16/30 0.030 0.76 0.595 15.11 4.9 221 equipment
09812 12 18 16/30 0.030 0.76 0.600 15.24 3.5 235 Features:
09814 14 18 16/30 0.030 0.76 0.630 16.00 3.5 262 • Extra-flexible stranding
09816 16 18 16/30 0.030 0.76 0.700 17.78 3.5 306 • Abrasion-resistant
• Resists oils and solvents
09818* 18 18 16/30 0.030 0.76 0.760 19.30 3.5 341
• Flame-resistant
09820 20 18 16/30 0.030 0.76 0.795 20.19 3.5 377 • Ozone-resistant
09822* 22 18 16/30 0.030 0.76 0.805 20.45 3.1 400 • 90ºC rated conductors and jacket
09824 24 18 16/30 0.030 0.76 0.850 21.59 3.1 453 • Water-resistant*
• UL Listed and CSA Certified for indoor and
09827* 27 18 16/30 0.030 0.76 0.865 21.97 3.1 475 outdoor use
09830* 30 18 16/30 0.030 0.76 0.915 23.24 3.1 524 • Ozone-, sunlight (UV)- and weather-resistant

09605 5 16 26/30 0.030 0.76 0.495 12.57 8.0 152 Industry Approvals:
• UL Flexible Cord - UL 62
09606 6 16 26/30 0.030 0.76 0.520 13.21 8.0 184 • CSA Flexible Cord - C22.2-49
09607 7 16 26/30 0.030 0.76 0.540 13.72 8.0 210 • MSHA Approved
09608 8 16 26/30 0.030 0.76 0.575 14.61 7.0 228 • RoHS Compliant
09609 9 16 26/30 0.030 0.76 0.600 15.24 7.0 255 Packaging:
09610 10 16 26/30 0.030 0.76 0.620 15.75 5.0 260 • 5- through 8-conductor available on 250'
(76.2 m), 500' (152.4 m), and 1000' (304.8 m)
09612 12 16 26/30 0.030 0.76 0.660 16.76 5.0 319
reels
09614 14 16 26/30 0.030 0.76 0.730 18.54 5.0 343 • 9+ cond. available on long-length reels
09616 16 16 26/30 0.030 0.76 0.740 18.80 5.0 367 • Other put-ups available on special order
09618* 18 16 26/30 0.030 0.76 0.770 19.56 5.0 405 * Suitable for immersion in water if properly sealed and
terminated.
09620 20 16 26/30 0.030 0.76 0.810 20.57 5.0 444
09622* 22 16 26/30 0.030 0.76 0.900 22.86 4.5 510
09624 24 16 26/30 0.030 0.76 0.925 23.50 4.5 547
09626* 26 16 26/30 0.030 0.76 0.965 24.51 4.5 611
09630 30 16 26/30 0.030 0.76 1.010 25.65 4.5 685
† Values shown are for current-carrying conductors. A grounding conductor, or one which carries only the unbalance current from
other conductors, is NOT counted in determining current carrying capacity. Ampacities based on NEC Table 400.5(A)(1).
* Non-stock item; minimum quantity purchase required.
(S)
Actual shipping weight may vary.

COLOR CODE CHART

NO. OF NO. OF NO. OF
COND. COLOR TRACER COND. COLOR TRACER COND. COLOR TRACER
1 Black — 8 Red Black 15 Blue White
2 White — 9 Green Black 16 Black Red
3 Red — 10 Orange Black 17 White Red
4 Green — 11 Blue Black 18 Orange Red
5 Orange — 12 Black White 19 Blue Red
6 Blue — 13 Red White 20 Red Green
7 White Black 14 Green White 21 Orange Green
Note: Colors repeat after 21 conductors.

45
Rubber Cord Products Mining

Super Vu-Tron Multi-Conductor Type SOOW ®

90ºC, 600 Volt, UL /CSA Portable Cord

Product Construction:
Conductors:
• 14 through 10 AWG fully annealed stranded bare
copper
Insulation:
• Premium-grade, color-coded 90ºC EPDM
• Color code: See chart below
Jacket:
• Super Vu-Tron® 90ºC, black
• Temperature range: -40ºC to +90ºC TYPE S00W – 600 VOLT – UL/CSA
Jacket Marking: NOMINAL INS.
THICKNESS NOMINAL O.D. APPROX.
• CAROL SUPER VU-TRON® (SIZE) (mm2) 90°C CATALOG NO. OF AWG COND. CURRENT NET WT.
(UL) WATER RESISTANT SOOW CSA (-40°C) NUMBER COND. SIZE STRAND INCHES mm INCHES mm AMPS† LBS/M'(S)
FT2 P-7K-123033 MSHA 600 VOLT ROHS
MADE IN USA 09405 5 14 41/30 0.045 1.14 0.645 16.26 12.0 266
Applications: 09406 6 14 41/30 0.045 1.14 0.710 18.03 12.0 313
• Control circuits 09407 7 14 41/30 0.045 1.14 0.755 19.18 12.0 326
• Tools
• Heavy industrial, processing and construction 09408 8 14 41/30 0.045 1.14 0.810 20.57 10.5 366
equipment 09409* 9 14 41/30 0.045 1.14 0.860 21.84 10.5 419
Features: 09410 10 14 41/30 0.045 1.14 0.875 22.23 10.5 436
• Extra-flexible stranding 09412 12 14 41/30 0.045 1.14 0.900 22.86 7.5 516
• Abrasion-resistant 09414 14 14 41/30 0.045 1.14 1.000 25.40 7.5 597
• Resists oils and solvents
• Flame-resistant 09416 16 14 41/30 0.045 1.14 1.030 26.16 7.5 658
• Ozone-resistant 09418* 18 14 41/30 0.045 1.14 1.100 27.94 7.5 720
• 90ºC rated conductors and jacket
• Water-resistant*
09420 20 14 41/30 0.045 1.14 1.155 29.34 7.5 799
• UL Listed and CSA Certified for indoor and 09424 24 14 41/30 0.045 1.14 1.260 32.00 6.7 998
outdoor use 09428* 28 14 41/30 0.045 1.14 1.330 33.78 6.7 1080
• Ozone-, sunlight (UV)- and weather-resistant
09430* 30 14 41/30 0.045 1.14 1.335 33.97 6.0 1146
Industry Approvals:
• UL Flexible Cord - UL 62 09205 5 12 65/30 0.045 1.14 0.715 18.16 16.0 326
• CSA Flexible Cord - C22.2-49 09206 6 12 65/30 0.045 1.14 0.740 18.80 16.0 362
• MSHA Approved
• RoHS Compliant
09207 7 12 65/30 0.045 1.14 0.790 20.07 16.0 415
09208 8 12 65/30 0.045 1.14 0.825 20.96 14.0 464
Packaging:
• 5- through 8-conductor available on 250' 09209 9 12 65/30 0.045 1.14 0.900 22.86 14.0 510
(76.2 m), 500' (152.4 m), and 1000' (304.8 m) 09210 10 12 65/30 0.045 1.14 0.950 24.13 14.0 602
reels 09212 12 12 65/30 0.045 1.14 1.010 25.65 10.0 662
• 9+ cond. available on long-length reels
• Other put-ups available on special order 09214 14 12 65/30 0.045 1.14 1.020 25.91 10.0 724
* Suitable for immersion in water if properly sealed and 09216 16 12 65/30 0.045 1.14 1.135 28.83 10.0 869
terminated. 09218* 18 12 65/30 0.045 1.14 1.175 29.85 10.0 912
09220 20 12 65/30 0.045 1.14 1.175 29.84 10.0 977
COLOR CODE CHART 09224 24 12 65/30 0.045 1.14 1.360 34.54 9.0 1236
NO. OF NO. OF 09226 26 12 65/30 0.045 1.14 1.380 35.05 9.0 1309
COND. COLOR TRACER COND. COLOR TRACER 09227* 27 12 65/30 0.045 1.14 1.390 35.30 9.0 1335
1 Black — 12 Black White 09228* 28 12 65/30 0.045 1.14 1.455 36.95 9.0 1375
2 White — 13 Red White 09230 30 12 65/30 0.045 1.14 1.455 36.96 9.0 1512
3 Red — 14 Green White 09005 5 10 104/30 0.045 1.14 0.770 19.56 20.0 423
4 Green — 15 Blue White 09006 6 10 104/30 0.045 1.14 0.875 22.23 20.0 508
5 Orange — 16 Black Red 09007 7 10 104/30 0.045 1.14 0.900 22.86 20.0 549
6 Blue — 17 White Red 09008* 8 10 104/30 0.045 1.14 0.935 23.75 17.5 625
7 White Black 18 Orange Red 09010 10 10 104/30 0.045 1.14 1.020 25.91 17.5 755
8 Red Black 19 Blue Red 09012 12 10 104/30 0.045 1.14 1.070 27.18 12.5 867
09016* 16 10 104/30 0.045 1.14 1.230 31.24 12.5 1142
9 Green Black 20 Red Green
09020* 20 10 104/30 0.045 1.14 1.325 33.66 12.5 1445
10 Orange Black 21 Orange Green
† Values shown are for current-carrying conductors. A grounding conductor, or one which carries only the unbalance
11 Blue Black Note: Colors repeat after 21
current from other conductors, is NOT counted in determining current carrying capacity. Ampacities based on
conductors. Refer to page
45 for color diagram. NEC Table 400.5(A)(1).
* Non-stock item; minimum quantity purchase required.
(S)
Actual shipping weight may vary.

46
Mining

Technical Information 4

Index Page

Installation and Engineering

Information 48-49

AWG-to-Metric
Conversion Chart 49

As mining cable applications have This technical section is Why and How Mining
evolved, the process of specifying presented to aid in the selection Cables Fail 50-51
mining cables to meet these of the appropriate mining cable
requirements has become more that best suits the application for Catalog Number
Index 52-54
time consuming and complex. which it is used.
Notes 55-56
Today’s mine supervisors and For technical issues and
engineers must be aware of not questions, please contact your
only the type of power distribution local General Cable distributor or
utilized but also the physical, our customer service department.
environmental and electrical
capabilities of each type of cable
being specified. With this in mind,
General Cable offers the most
complete line of cables to serve
the mining industry.

47
Technical Information Mining

Installation and Engineering Information

Proper Splices AMPACITY CORRECTION FACTORS

While it is true that no splice is as good as a new cable, APPROXIMATE FOR ALL CABLE VOLTAGES
the use of quality materials and proven techniques can
dramatically improve the service life of the cable splice. Correction factors are listed below for various ambient
A well-made splice has the following characteristics: temperatures.
1. High tensile strength — the splice cannot be easily
pulled in two AMBIENT CORRECTION FACTORS FOR
2. Balanced conductors — equal tension on each TEMPERATURE INSULATIONS RATED AT:
conductor ˚C 90˚C
3. Small outside diameter — the splice can be passed 10 1.26
easily through existing cable guides 20 1.18
30 1.10
4. Low electrical resistance
40 1.00
5. Adequate insulation
50 0.90
6. High resistance to fatigue
7. A covering that is capable of keeping moisture from When cables are used with one or more layers wound on
entering the cable interior a reel, the ampacities should be derated as follows:

Shielding NUMBER OF LAYERS MULTIPLY AMPACITIES BY

Remember that an ungrounded shield is dangerous 1 0.85
and should be treated as an energized conductor. 2 0.65
The shield must be grounded at least at one end and 3 0.45
preferably at two or more locations. It is recommended 4 0.35
that shields be grounded at all cable terminations and
splices. Stress cones should be installed at all high-
voltage shield terminations. VOLTAGE DROP
Approximate for all cable voltages — three conductor cables
Working Tension
The maximum working tension per conductor should 90˚C
not exceed 10 percent of the rated conductor strength. 60-CYCLE PHASE-TO-PHASE VOLTAGE DROP PER AMPERE
To determine the approximate tensile strength of the PER 1,000 FT AT POWER FACTORS OF:
cable, multiply the total power conductor area (in2) by CONDUCTOR SIZE
(AWG or kcmil) 80% 90% 100%
30,000 psi.
6 0.82 0.90 0.95
4 0.54 0.58 0.60
Bending Radius
2 0.35 0.38 0.38
Industry standard guidelines vary slightly regarding
1 0.29 0.31 0.30
recommended bending radii for flexible cables. The
1/0 0.24 0.25 0.24
table below shows the recommended bending radii of
2/0 0.20 0.20 0.19
flexible mining cables from both ICEA and CSA:
3/0 0.16 0.17 0.15
4/0 0.14 0.14 0.12
ICEA S-75-381 CSA 22.2 96 250 0.12 0.12 0.10
Braid-shielded portable 6 times the 8 times the 300 0.11 0.11 0.08
cables ≤ 5000 V cable diameter cable diameter 350 0.10 0.09 0.07
Braid-shielded portable 8 times the 8 times the 400 0.09 0.08 0.06
cables > 5000 V cable diameter cable diameter 500 0.08 0.07 0.05
Non-shielded 6 times the 6 times the
portable cables cable diameter cable diameter
Flat non-shielded 6 times the 6 times the
cables minor dimension cable diameter

The ICEA and CSA agree that the recommended bend

radius of copper tape shielded mine power feeder cables
is 12 times the cable diameter.

48 08/2013
Mining Technical Information

Installation and Engineering Information &

AWG-to-Metric Conversion Chart
AMPACITIES FOR PORTABLE POWER CABLES, AMPERES PER CONDUCTOR
TWO THREE
POWER CONDUCTOR CONDUCTOR
CONDUCTOR ROUND ROUND THREE CONDUCTOR FOUR FIVE SIX
SIZE SINGLE CONDUCTOR AND FLAT AND FLAT ROUND CONDUCTOR CONDUCTOR CONDUCTOR
2001- 8001- 15001- 0-5000 8001- 15001-
0-2000 8000 15000 25000 VOLTS 0-8000 15000 25000
AWG VOLTS VOLTS* VOLTS* VOLTS* 0-2000 NON- VOLTS VOLTS VOLTS 0-2000 0-2000 0-2000
or kcmil NONSHIELDED SHIELDED SHIELDED SHIELDED VOLTS SHIELDED SHIELDED SHIELDED SHIELDED VOLTS VOLTS VOLTS
8 83 - - - 72 59 - - - 54 50 48
6 109 112 - - 95 79 93 - - 72 68 64
4 145 148 - - 127 104 122 - - 93 88 83
3 167 171 - - 145 120 140 - - 106 100 95
2 192 195 195 - 167 138 159 164 178 122 116 110
1 223 225 225 222 191 161 184 187 191 143 136 129
1/0 258 260 259 255 217 186 211 215 218 165 - -
2/0 298 299 298 293 250 215 243 246 249 192 - -
3/0 345 345 343 337 286 249 279 283 286 221 - -
4/0 400 400 397 389 328 287 321 325 327 255 - -
250 445 444 440 430 363 320 355 359 360 280 - -
300 500 496 491 480 400 357 398 - - 310 - -
350 552 549 543 529 436 394 435 - - 335 - -
400 600 596 590 572 470 430 470 - - 356 - -
450 650 640 633 615 497 460 503 - - 377 - -
500 695 688 678 659 524 487 536 - - 395 - -
550 737 732 - - - - - - - - - -
600 780 779 - - - - - - - - - -
650 820 817 - - - - - - - - - -
700 855 845 - - - - - - - - - -
750 898 889 - - - - - - - - - -
800 925 925 - - - - - - - - - -
900 1010 998 - - - - - - - - - -
1000 1076 1061 - - - - - - - - - -
*These ampacities are based on a single isolated cable in air, operated with an open-circuited shield.
NOTE – These ampacities are based on a conductor temperature of 90˚C and an ambient air temperature of 40˚C.
Copyright 1964 by the Insulated Cable Engineering Association (ICEA). Permission has been granted by ICEA to reproduce this material.

AWG-TO-METRIC
CONVERSION CHART
SIZE
SIZE (AWG or
2
(AWG) mm kcmil) mm2
18 0.82 1/0 53.5
16 1.31 2/0 64.4
14 2.08 3/0 85.0
12 3.31 4/0 107.0
10 5.26 250 127.0
9 6.63 300 152.0
8 8.37 350 177.0
6 13.30 500 253.0
4 21.15 600 304.0
2 33.62 750 380.0
1 42.40 1000 507.0

49
Technical Information Mining

Why and How Mining Cables Fail

Cable breakdowns are neither mysterious nor unaccountable and almost without exception can
be traced to one or more of the following causes:
1. Excessive tension
2. Mechanical damage
3. Current overload
4. Improper splicing and termination techniques
Excessive Tension
Many cable failures are the direct result of excessive tension. A cable that has been “stretched”
no longer has the balanced construction that is so vital to long life. Tension on the conductors
subjects the individual wires in the strand to compression and shear. These thin wires are
damaged and will break more easily when bent or flexed.
Tension also elongates the conductor insulation. The elongated insulation is then vulnerable
to compression cutting. It will rupture more easily when it is crushed against the stranded
conductor during runovers. The insulation will also have a tendency to creep over the conductor
at a splice.
Jackets under tension lose a considerable part of their resistance to mechanical damage. A
jacket under tension is much more likely to be cut or torn. Stretching also causes the copper
conductors to take a permanent set. Of course, the insulation and jacket are stretched as well,
but they will return to their original length when the tension is removed. This difference in the
properties of rubber and copper when subjected to tension will cause the conductors to be wavy
and fail prematurely.
To reduce tension on the cable:
1. Avoid backspooling, if possible.
2. If backspooling is unavoidable, locate the tie point as far back from the haulageway
as possible.
3. Tram slowly when passing the tie point.
4. Set hydraulic tension on the cable reel so that approximately 12-15 feet of cable is
picked up off the mine bottom when starting to tram.
Mechanical Damage
This is one of the most prevalent sources of trailing cable failures. Factors initiating mechanical
damage include cutting, compression (crushing), punctures and abrasion. In extreme cases of
mechanical damage, the failure is instant, and the cause can be assigned on the spot. Many
times, however, the cable components are merely “injured” and become latent failures. At that
point, it may be more difficult to pinpoint the exact cause and to take remedial action.

50
Mining Technical Information

Why and How Mining Cables Fail

Current Overload
The temperatures of the conductors, insulation and jacket are, of course, elevated when cables
are subjected to an electrical load. The resistance of the copper is increased, voltage drop in the
cable is increased, and therefore, a reduced voltage is supplied to the machine. As a result, the
machine calls for more current, which adds further to cable heating. A trailing cable’s insulation
and jacket materials exhibit maximum resistance to physical abuse at the rated conductor
temperature of 90°C or less. The ability of these components to withstand damage decreases
as the temperature increases. Conditions which normally cause few cable failures suddenly
become a problem. At elevated temperatures, the jacket has lost much of its resistance to
cutting, crushing, tearing and abrasion. The section of the cable that remains on the reel is most
likely to be damaged by electrical overload. Layering on the reel hinders ventilation and heat
dissipation. Continued exposure to elevated temperatures will age the jacket, making it hard and
brittle and causing crazing or cracking upon subsequent reeling.
Improper Splicing and Termination Techniques
Over the years, much work has been done to improve both splicing materials and techniques.
The following items have been found to be primarily responsible for unsatisfactory splice service:
1. Ending up with a grounding or ground-check conductor which is shorter than the power
conductors
2. Semi-conducting residue on the insulation surface was not removed
3. Gaps, voids or soft spots in insulating tape build-up
4. Improper termination of shielding system, leaving inward-pointing projections
5. Damage to factory insulation by improper removal of shielding systems
6. Excessive slack in one or more individual conductors
7. Splice has low tensile strength and is easily pulled in two
8. Individual wires are damaged during application of connector
9. Splice is too bulky — will not pass through cable guides or over sheaves
10. Improper application of the outer covering, allowing water to enter the cable interior
By choosing a cable with an adequate current rating, avoiding excessive tension and
mechanical damage, and using proper splicing techniques, it is not unreasonable to reduce
cable-related downtime by 50 percent or more. This will, of course, translate into increased
production and profits.

51
Technical Information Mining

Catalog Number Index

CATALOG CATALOG CATALOG CATALOG

NUMBER PAGE NUMBER PAGE NUMBER PAGE NUMBER PAGE

01310........................43 01824........................44 02835........................40 09418........................46

01311........................43 01825........................44 02845........................40 09420........................46
01312........................43 01827........................44 02855........................40 09424........................46
01342........................43 02601........................41 02861........................40 09428........................46
01343........................43 02602........................41 02862........................40 09430........................46
01344........................43 02603........................41 02868........................40 09605........................45
01358........................43 02604........................41 02906........................40 09606........................45
01360........................43 02605........................41 02935........................40 09607........................45
01364........................43 02606........................41 02945........................40 09608........................45
01379........................43 02607........................41 02955........................40 09609........................45
01380........................43 02608........................41 02961........................40 09610........................45
01381........................43 02609........................41 02962........................40 09612........................45
01382........................43 02621........................41 02968........................40 09614........................45
01383........................43 02622........................41 09005........................46 09616........................45
01384........................43 02623........................41 09006........................46 09618........................45
01751........................35 02624........................41 09007........................46 09620........................45
01752........................35 02631........................41 09008........................46 09622........................45
01753........................35 02632........................41 09010........................46 09624........................45
01754........................35 02633........................41 09012........................46 09626........................45
01755........................35 02634........................41 09016........................46 09630........................45
01756........................35 02635........................41 09020........................46 09805........................45
01757........................35 02636........................41 09205........................46 09806........................45
01758........................35 02637........................41 09206........................46 09807........................45
01761........................37 02638........................41 09207........................46 09808........................45
01762........................37 02639........................41 09208........................46 09810........................45
01763........................37 02641........................41 09209........................46 09812........................45
01764........................37 02642........................41 09210........................46 09814........................45
01765........................37 02643........................41 09212........................46 09816........................45
01766........................37 02645........................41 09214........................46 09818........................45
01767........................37 02646........................41 09216........................46 09820........................45
01768........................37 02722........................42 09218........................46 09822........................45
01771........................36 02723........................42 09220........................46 09824........................45
01772........................36 02724........................42 09224........................46 09827........................45
01773........................36 02725........................42 09226........................46 09830........................45
01774........................36 02726........................42 09227........................46 13101.629210.............5
01775........................36 02727........................42 09228........................46 13101.814061.............2
01776........................36 02728........................42 09230........................46 13102.177012.............6
01777........................36 02762........................42 09405........................46 13102.514941.............3
01778........................36 02763........................42 09406........................46 13102.830713.............5
01811........................44 02765........................42 09407........................46 13104.785463.............3
01812........................44 02766........................42 09408........................46 13106.824571.............3
01818........................44 02767........................42 09409........................46 13114.755200.............5
01819........................44 02768........................42 09410........................46 13115.550200.............2
01821........................44 02769........................42 09412........................46 13115.550300.............2
01822........................44 02770........................42 09414........................46 13115.550400.............2
01823........................44 02806........................40 09416........................46 13115.755300.............2

52
Mining Technical Information

Catalog Number Index

CATALOG CATALOG CATALOG CATALOG

NUMBER PAGE NUMBER PAGE NUMBER PAGE NUMBER PAGE

13115.755400.............2 13329.345100.............8 13354.646000.............7 16241.615100.CA.....15

13116.550300.............5 13329.645200.............8 13354.646500.............7 16243.310100...........18
13116.550400.............5 13329.645300.............8 13354.774063.............7 16243.310100.CA.....19
13116.755300.............5 13329.645400.............8 13362.315522...........10 16243.310200...........18
13116.755400.............5 13329.646000.............8 13362.315522.CA.....11 16243.310200.CA.....19
13151.499461.............2 13329.646200.............8 13373.030100...........24 16243.310400...........18
13151.752132.............5 13329.646500.............8 13373.030200...........24 16243.310400.CA.....19
13152.844840.............2 13340.340100...........12 13373.035100...........24 16243.615100...........18
13162.650400.............6 13340.340100.CA.....13 13373.035200...........24 16243.615100.CA.....19
13162.650600.............6 13340.355100...........12 13373.035300...........24 16243.615300...........18
13164.550100.............6 13340.355100.CA.....13 13373.035400...........24 16243.615300.CA.....19
13164.550300.............6 13340.645200...........12 13373.036000...........24 16243.616000...........18
13164.555100.............6 13340.645200.CA.....13 13373.036200...........24 16243.616000.CA.....19
13164.755200.............6 13340.645300...........12 13373.036500...........24 16243.616100...........18
13164.755300.............6 13340.645300.CA.....13 13790.025200.............9 16243.616100.CA.....19
13164.755400.............6 13340.645400...........12 13792.020100.............9 16243.616200...........18
13192.800100.............3 13340.645400.CA.....13 13792.020200.............9 16243.616200.CA.....19
13192.805100.............3 13340.646000...........12 13792.025100.............9 16243.616500...........18
13192.905200.............3 13340.646000.CA.....13 13792.025300.............9 16243.616500.CA.....19
13192.905300.............3 13340.646100...........12 16063........................42 16245.310100...........20
13192.905400.............3 13340.646100.CA.....13 16064........................42 16245.310100.CA.....21
13301.422060.............7 13340.646200...........12 16065........................42 16245.310200...........20
13301.814577...........10 13340.646200.CA.....13 16073........................42 16245.310200.CA.....21
13301.814577.CA.....11 13340.646500...........12 16074........................42 16245.315100...........20
13302.253396...........10 13340.646500.CA.....13 16075........................42 16245.315100.CA.....21
13302.253396.CA.....11 13349.340300...........10 16083........................42 16245.615300...........20
13302.440200.............4 13349.340300.CA.....11 16084........................42 16245.615300.CA.....21
13302.772159.............7 13349.645300...........10 16085........................42 16245.615400...........20
13304.440400.............4 13349.645300.CA.....11 16093........................42 16245.615400.CA.....21
13304.693196.............7 13349.646000...........10 16094........................42 16245.616000...........20
13306.240400...........10 13349.646000.CA.....11 16095........................42 16245.616000.CA.....21
13306.240400.CA.....11 13349.646100...........10 16201.396409...........14 16245.616200...........20
13306.240600...........10 13349.646100.CA.....11 16201.396409.CA.....15 16245.616200.CA.....21
13306.240600.CA.....11 13349.646500...........10 16202.317964...........14 16245.616500...........20
13306.340100.............4 13349.646500.CA.....11 16202.317964.CA.....15 16245.616500.CA.....21
13306.340300.............4 13351.179353...........10 16204.858221...........14 16247.310100...........22
13306.345100.............4 13351.179353.CA.....11 16204.858221.CA.....15 16247.310100.CA.....23
13306.426312.............4 13351.608053.............7 16241.210600...........14 16247.315100...........22
13306.644092.............7 13352.555382.............7 16241.210600.CA.....15 16247.315100.CA.....23
13306.645200.............4 13352.556200.............7 16241.215300...........14 16247.315200...........22
13306.645300.............4 13352.658076...........10 16241.215300.CA.....15 16247.315200.CA.....23
13306.645400.............4 13352.658076.CA.....11 16241.216000...........14 16247.615300...........22
13306.646000.............4 13354.340300.............7 16241.216000.CA.....15 16247.615300.CA.....23
13306.646200.............4 13354.490389...........10 16241.216300...........14 16247.615400...........22
13306.646500.............4 13354.490389.CA.....11 16241.216300.CA.....15 16247.615400.CA.....23
13329.340100.............8 13354.645300.............7 16241.615100...........14 16247.616000...........22

53
Technical Information Mining

Catalog Number Index

CATALOG CATALOG CATALOG CATALOG

NUMBER PAGE NUMBER PAGE NUMBER PAGE NUMBER PAGE

16247.616000.CA.....23 16361.916200...........25 80671........................38 82374........................34

16247.956200...........22 16361.916500...........25 80681........................38 82383........................34
16247.956200.CA.....23 16362.279989...........27 80691........................38 82384........................34
16252.201837...........18 16363.910100...........26 80701........................38 82393........................34
16252.201837.CA.....19 16363.910200...........26 81312........................33 82394........................34
16252.271926...........14 16363.910400...........26 81313........................33 82403........................34
16252.271926.CA.....15 16363.910600...........26 81314........................33 82404........................34
16252.530102...........16 16363.915100...........26 81315........................33 82413........................34
16252.530102.CA.....17 16363.915200...........26 81372........................33 82414........................34
16254.709412...........18 16363.915300...........26 81373........................33 82423........................34
16254.709412.CA.....19 16363.916000...........26 81374........................33 82443........................34
16254.730315...........14 16363.916200...........26 81375........................33 82473........................34
16254.730315.CA.....15 16363.916500...........26 81382........................33 82623........................34
16262.687414...........14 16365.910100...........27 81383........................33 82624........................34
16262.687414.CA.....15 16365.910200...........27 81384........................33 82643........................34
16265.570479...........14 16365.915100...........27 81385........................33 82644........................34
16265.570479.CA.....15 16365.915200...........27 81392........................33 82663........................34
16299.060100...........16 16365.915300...........27 81393........................33 82664........................34
16299.060100.CA.....17 16365.916000...........27 81394........................33 83001........................32
16299.065100...........16 16365.916500...........27 81395........................33 83002........................32
16299.065100.CA.....17 16367.910100...........28 81402........................33 83004........................32
16299.065300...........16 16367.915100...........28 81403........................33 83006........................32
16299.065300.CA.....17 16367.915200...........28 81404........................33 83008........................32
16299.065400...........16 16367.915300...........28 81405........................33 83010........................32
16299.065400.CA.....17 16367.915400...........28 81412........................33 83020........................32
16299.066000...........16 16367.916000...........28 81413........................33 83030........................32
16299.066000.CA.....17 16367.916200...........28 81414........................33 83040........................32
16299.066100...........16 16367.916500...........28 81415........................33 83250........................32
16299.066100.CA.....17 37017.99.01..............29 81423........................33 83350........................32
16299.066200...........16 37019.99.01..............29 81443........................33 83500........................32
16299.066200.CA.....17 37021.99.01..............29 81473........................33 98187........................44
16299.066500...........16 37022.99.01..............29 81622........................33 98267........................44
16299.066500.CA.....17 37024.99.01..............29 81623........................33 98270........................44
16299.625200...........20 37026.99.01..............29 81624........................33 98463........................44
16299.625200.CA.....21 37032.99.01..............30 81625........................33 99142........................36
16354.396889...........27 37035.99.01..............30 81642........................33 99202........................36
16354.552364...........26 37037.99.01..............30 81643........................33 99432........................36
16361.910100...........25 37038.99.01..............30 81644........................33
16361.910200...........25 37040.99.01..............30 81645........................33
16361.910400...........25 37042.99.01..............30 81662........................33
16361.910600...........25 80611........................38 81663........................33
16361.915100...........25 80621........................38 81664........................33
16361.915200...........25 80631........................38 81665........................33
16361.915300...........25 80641........................38 82313........................34
16361.915400...........25 80651........................38 82314........................34
16361.916000...........25 80661........................38 82373........................34

54
Mining Technical Information

Notes

55
Technical Information Mining

Notes

56
 You already know
it’s the best.
Now you
know where
to find it.
If you’ve been looking for the best-built
mining cable on the market, your search just
ended. General Cable offers a full line of
premium Anaconda® Brand cables engineered for
superior performance in the most challenging
applications. And they’re manufactured at the same
facility, to the same exacting specifications, that have
made the Anaconda® Brand name famous worldwide.
As always, specially designed conductors, insulation
and jackets that exceed industry standards have made
Anaconda® Brand cables the most reliable choice for
mining equipment. For over 50 years, they’ve been the
right cable. And now, they’re right here.
 Global Reach

General Cable, a leading wire and cable innovator for over 170 years, serves customers
through a global network of 57 manufacturing facilities in 26 countries and has worldwide
sales representation and distribution. The Company is dedicated to the production of
high-quality aluminum, copper and fiber optic wire and cable and systems solutions for the
energy, construction, industrial, specialty and communications sectors. In addition to our
strong brand recognition and strengths in technology and manufacturing, General Cable is
also competitive in such areas as distribution and logistics, marketing, sales and customer
service. This combination enables General Cable to better serve its customers as they
expand into new geographic markets.

General Cable
4 Tesseneer Drive 156 Parkshore Drive
Highland Heights, Kentucky 41076-9753 Brampton, Ontario L6T 5M1
Telephone: 800.424.5666 Telephone: 800.561.0649
859.572.8000 905.494.5300
Fax: 800.335.1270 Fax: 800.565.2529
Email: info@generalcable.com Email: infoca@generalcable.com
www.generalcable.com

Form No. INS-0044-R1014

46096