37 Development Design Jobs in Meerut

Job Tital  We are seeking a dynamic Petroleum engineer to join our team. Petroleum engineers design and develop methods for extracting oil and gas from deposits below the earths surface. Petroleum engineers also find new ways to extract oil and gas from older wells.  Duties Petroleum engineers typically do the following:  Design equipment to extract oil and gas in the most profitable way Develop ways to inject water, chemicals, gases, or steam into an oil reserve to force out more of the oil Develop plans to drill in oil and gas fields, and then to recover the oil and gas Make sure that wells, well testing, and well surveys are completed and evaluated Use computer-controlled drilling or fracturing to connect a larger area of an oil and gas deposit to a single well Make sure that oil field equipment is installed, operated, and maintained properly Oil and gas deposits, or reservoirs, are located deep in rock formations underground. These reservoirs can only be accessed by drilling wells, either on land or at sea from offshore oil rigs.  Once oil and gas are discovered, petroleum engineers work with geologists and other specialists to understand the geologic formation of the rock containing the reservoir. They then determine drilling methods, design and implement the drilling equipment, and monitor operations.  The best techniques currently being used recover only a portion of the oil and gas in a reservoir, so petroleum engineers also research and develop new ways to recover the oil and gas. This helps to lower the cost of drilling and production.  The following are examples of types of petroleum engineers:  Completions engineers decide the optimal way to finish building a well so that the oil or gas will flow up from underground. They oversee well-completions work, which might involve the use of tubing, hydraulic fracturing, or pressure-control techniques.  Drilling engineers determine the best way to drill an oil or gas well, taking into account a number of factors, including cost. They also ensure that the drilling process is safe, efficient, and minimally disruptive to the environment.  Production engineers take over after a well is completed. They typically monitor the wells oil and gas production. If a well is not producing as much as it was expected to, production engineers figure out ways to increase the amount being extracted.  Reservoir engineers estimate how much oil or gas can be recovered from underground deposits, known as reservoirs. They study a reservoirs characteristics and determine which methods will get the most oil or gas out of the reservoir. They also monitor operations to ensure that the optimal levels of these resources are being recovered.  Mail me resume - hr.kanikasharma99@gmail.com  call me - 8376003046

As a Graphic Designer intern at SKU Creations (Managed by Techno Brainz), you will have the opportunity to work on exciting projects and develop your skills in Adobe Illustrator and Adobe Photoshop. If you are a creative graphics designer, this is the perfect role for you. **Key Responsibilities:** - Create visually appealing designs for product packaging and labels. - Assist in the development of marketing materials such as social media graphics and email campaigns. - Collaborate with the marketing team to brainstorm and execute creative concepts. - Ensure all designs adhere to brand guidelines and maintain a consistent aesthetic. - Support the production team in preparing files for print and digital distribution. - Stay up to date with industry trends and incorporate new techniques into your designs. - Take ownership of projects from concept to completion, showcasing your unique design style. **Qualifications Required:** - Proficiency in Adobe Illustrator and Adobe Photoshop. - Creative mindset with a keen eye for detail. - Strong communication and teamwork skills. - Ability to work in a fast-paced environment and meet deadlines. If you are a passionate and driven individual looking to gain hands-on experience in a dynamic environment, apply now and unleash your creativity with SKU Creations. (Note: Additional details about the company providing digital solutions and expertise in YouTube and Instagram marketing have been omitted for brevity.),

As a Lead QA Engineer, you will be responsible for overseeing the quality assurance processes for projects, leading a team, and ensuring seamless functionality and user satisfaction in enterprise applications. Your key responsibilities include: - Test Automation and Manual Testing: - Lead and execute test automation using Cypress / Selenium, Java, and JavaScript. - Plan and execute manual testing to ensure thorough test coverage and identify potential issues. - STLC Implementation: - Gather and analyze requirements to design effective testing strategies. - Define and oversee input requirements, process timelines, and testing plans. - Ensure adherence to STLC phases: requirement gathering, planning, execution, reporting, and closure. - Infrastructure Management: - Set up and maintain QA environments, tools, machines, and platforms. - Identify and resolve infrastructure bottlenecks to streamline the testing process. - Execution and Reporting: - Develop detailed execution plans for testing cycles. - Monitor and report testing progress and results. - Process Management: - Define and maintain Standard Operating Procedures (SOPs) and testing processes. - Continuously optimize QA processes for better efficiency and effectiveness. - Team Leadership: - Lead and mentor a team of QA engineers. - Assign tasks, monitor team performance, and provide timely feedback. - Coordinate with cross-functional teams to ensure seamless project execution. - Project Management: - Collaborate with stakeholders to ensure testing aligns with project goals and timelines. - Support: - Interface with the Support team for Customer Queries / Bugs and their resolution. In addition to your responsibilities, you must have distinguished skills in Domain Knowledge, Technical Skills, and Cultural Fit. Some of the key requirements include: Domain Knowledge: - Understanding of SDLC (Software Development Life Cycle). - Good understanding of Scrum. - Expertise in web and android Application Testing. Technical Skills: - Deep knowledge of STLC (Software Testing Life Cycle) and testing methodologies. - Experience in writing clear, concise, and comprehensive Test Plans and Test Cases. - Knowledge of Test-driven development (TDD) and Behavior-driven development (BDD). - Hands-on programming experience. - Proficiency in programming languages like Java or JavaScript to build and customize test scripts. - Hands-on experience with API testing tools such as Postman. - Strong understanding of QA environments, platforms, and tools. - Experience in test automation tools like Selenium, Cypress, Page Object Model. Cultural Fit: - Good IQ Level and logical thinking. - Team player and facilitator. - Good communication skills. It would be good to have working experience on ERP modules, experience in testing Responsive designs, experience with creating reusable automation frameworks, familiarity with tools like JMeter OR LoadRunner for performance and load testing, knowledge of GIT Repository, knowledge of CI/CD pipeline, Jenkins, GIT Runner, and experience working with Product Based Companies.,

As a Product Manager for the next-generation ERP system, your role will involve the following key responsibilities: - Deep Dive into Market Needs: - Conduct in-depth market research to identify opportunities for innovative features specific to your assigned business process. - Bridge the Gap: - Translate your expertise in business processes into clear and actionable product requirements for the development team. - Champion User Experience: - Lead user testing sessions, gather feedback, and drive usability improvements to enhance the overall user experience. - Product Documentation Master: - Craft and maintain comprehensive user manuals, release notes, and FAQs to ensure users have the necessary resources for utilizing the ERP system effectively. - Market Maven (Collaboration): - Partner with the marketing team to develop compelling product messaging and create effective presentations and demos to showcase the product's capabilities. - Tech Trend Tracker: - Stay updated on industry trends and technologies related to ERP systems and your assigned business process to ensure the product remains competitive in the market. Qualifications required for this role include: - Bachelor's degree in CS, IT, Business Administration, or a related field. - Extensive experience in product management, business analysis, or a related field, with a focus on ERP systems. - In-depth understanding of the challenges and opportunities associated with the chosen business process. - Ability to translate business needs into technical specifications, with programming experience considered a significant advantage. - Strong analytical and problem-solving skills with a focus on process optimization. - Attention to detail and a commitment to delivering high-quality products. - Excellent communication, collaboration, and interpersonal skills. - Ability to thrive in a fast-paced environment and manage multiple priorities effectively. As a Product Manager for the next-generation ERP system, your role will involve the following key responsibilities: - Deep Dive into Market Needs: - Conduct in-depth market research to identify opportunities for innovative features specific to your assigned business process. - Bridge the Gap: - Translate your expertise in business processes into clear and actionable product requirements for the development team. - Champion User Experience: - Lead user testing sessions, gather feedback, and drive usability improvements to enhance the overall user experience. - Product Documentation Master: - Craft and maintain comprehensive user manuals, release notes, and FAQs to ensure users have the necessary resources for utilizing the ERP system effectively. - Market Maven (Collaboration): - Partner with the marketing team to develop compelling product messaging and create effective presentations and demos to showcase the product's capabilities. - Tech Trend Tracker: - Stay updated on industry trends and technologies related to ERP systems and your assigned business process to ensure the product remains competitive in the market. Qualifications required for this role include: - Bachelor's degree in CS, IT, Business Administration, or a related field. - Extensive experience in product management, business analysis, or a related field, with a focus on ERP systems. - In-depth understanding of the challenges and opportunities associated with the chosen business process. - Ability to translate business needs into technical specifications, with programming experience considered a significant advantage. - Strong analytical and problem-solving skills with a focus on process optimization. - Attention to detail and a commitment to delivering high-quality products. - Excellent communication, collaboration, and interpersonal skills. - Ability to thrive in a fast-paced environment and manage multiple priorities effectively.

Role Overview: As a Network Engineer at Tryndbuy Fashion, you will be responsible for designing, implementing, and maintaining the network infrastructure to ensure seamless operation of computer networks. Your role will involve troubleshooting issues, optimizing network efficiency, and providing technical support to the team. Key Responsibilities: - Design, configure, and maintain network devices such as routers, switches, and firewalls - Monitor network performance, identify bottlenecks, and implement solutions for optimal network efficiency - Troubleshoot network issues, conduct root cause analysis, and apply necessary fixes - Collaborate with other IT teams for the integration of network infrastructure with other systems - Develop and enforce network security policies and procedures - Provide technical support and training to end-users - Stay updated with the latest networking technologies and trends Qualifications Required: - Bachelor's degree in Computer Science, Information Technology, or a related field - 1-3 years of experience in network engineering or a related field - Strong knowledge of networking protocols (TCP/IP, DNS, DHCP) and technologies (LAN, WAN, WLAN) - Experience in network hardware configuration and troubleshooting - Proficiency in network monitoring and troubleshooting tools - Excellent problem-solving and analytical skills - Strong communication and teamwork skills - Relevant certifications such as CCNA, CCNP are a plus Additional Details: Tryndbuy Fashion offers opportunities for growth and career advancement. Training and development opportunities may also be available to enhance your skills and knowledge in the field. Note: Work Location is in person.,

As a Lead PHP Developer at our Corporate Office in Meerut, you will play a crucial role in our Development Team by utilizing your strong core technical skills and innovative mindset. You will have the opportunity to take ownership of projects, work independently, and contribute to the success of the team. Here is a breakdown of what will be expected from you: Key Responsibilities: - Collaborate with Product Managers to architect application class diagrams, methods, and user flow. - Write efficient program code, provide unit tested working solutions, and maintain a well-documented codebase. - Lead and mentor a team of software developers to ensure the successful delivery of projects. - Contribute significantly to technical specification, architecture, and decision-making processes. Qualification Required: - Bachelor's degree in Computer Science or higher in IT fields. - Strong knowledge and experience in Object-Oriented Programming (OOPs) and Model-View-Controller (MVC) development. - Proficiency in web application development using PHP and Web 2.0 technologies. - Experience working with Yii PHP framework and developing ERP modules. Additionally, you should have an understanding of the software development life cycle (SDLC) and be passionate about the art of programming. Your resourcefulness, innovation, and extensive experience in application layout, design, and coding will be invaluable assets to our team.,

You are a talented Senior Software Engineer/Developer with 5-12 years of experience, seeking to join a team in Meerut, UP. You should have extensive knowledge in Core PHP and MySql, with additional expertise in Node.js, React, JavaScript, Python, C/C++, and Yii-Framework being preferred. Your main responsibilities will involve designing, developing, and maintaining software applications using various technologies like Core PHP, Node.js, React, JavaScript, Python, C/C++, and Yii-Framework. Collaboration with cross-functional teams to define and deliver new features, writing clean and efficient code, troubleshooting and resolving issues, as well as conducting code reviews to ensure quality and standards adherence are crucial aspects of your role. - Design, develop, and maintain software applications using Core PHP, Node.js, React, JavaScript, Python, C/C++, and Yii-Framework. - Collaborate with cross-functional teams to define and deliver new features. - Write clean and efficient code, troubleshoot and resolve issues. - Conduct code reviews to ensure quality and standards adherence. - Bachelor's or Master's degree in Computer Science, Engineering, or a related field. - Strong proficiency in Core PHP and MySql. - Knowledge of Node.js, React, JavaScript, Python, C/C++, Yii-Framework would be advantageous. - Deep understanding of software engineering principles, database design, and optimization. - Problem-solving skills and effective communication abilities. This position offers the opportunity to stay updated with emerging technologies and industry trends, mentor junior developers, and provide technical guidance and support. The role is full-time and includes benefits such as health insurance. If you are passionate about software development, possess the required qualifications, and enjoy working in a fast-paced, collaborative environment, this role may be the perfect fit for you.,

As a Data & Reporting Specialist at our company, you will be entrusted with the responsibility of designing and maintaining interactive dashboards in Looker Studio. You will also be tasked with building automated data pipelines across various platforms such as GHL, AR, CallTools, and Google Sheets to ensure data accuracy and reporting consistency. Collaboration with internal stakeholders to define KPIs and enhance insights will be a key part of your role. Key Responsibilities: - Develop and maintain engaging dashboards in Looker Studio to visualize key metrics effectively. - Blend and transform data from diverse sources, including GHL, Aesthetic Record, CallTools, and Google Sheets. - Design and maintain automated workflows using tools like Zapier, Make.com, Google Apps Script, or ETL tools like Fivetran or Stitch. - Ensure data integrity, accuracy, and compliance with governance standards such as GDPR and HIPAA. - Optimize BigQuery queries and data structures for cost efficiency through techniques like partitioning and materialized views. - Document dashboard logic, metrics, calculations, and pipeline processes clearly. - Collaborate with the founder and clients to refine KPIs and enhance performance tracking. - Propose and implement process improvements to reduce manual effort and enhance reporting scalability. - Utilize version control systems like Git to manage scripts and documentation effectively. Required Skills & Qualifications: - 4+ years of hands-on experience with Looker Studio (Google Data Studio). - Proficiency in BigQuery, SQL, and Google Apps Script for data processing and automation. - Advanced Google Sheets skills including queries, pivot tables, and complex formulas. - Experience with automation platforms like Zapier, Make.com, or similar. - Familiarity with ETL tools such as Fivetran, Stitch, or OWOX BI for robust data pipeline development. - Knowledge of API integrations, webhooks, and token-based authentication. - Understanding of digital marketing metrics like leads, revenue, ROAS, and attribution. - Experience with BigQuery optimization techniques like partitioning and materialized views for cost management. - Familiarity with Git or similar version control systems for code and documentation management. - Strong problem-solving skills with a focus on data accuracy and attention to detail. - Comfortable working across different time zones using platforms like Slack, Zoom, Trello, or Notion. - Excellent English communication and documentation skills. Bonus Skills (Preferred, Not Mandatory): - Experience with platforms like GoHighLevel (GHL), Aesthetic Record, or CallTools. - Exposure to industries such as medical or beauty services, including compliance knowledge (e.g., GDPR, HIPAA). - Past experience in syncing CRM, booking, or call data into dashboards. - Basic statistical analysis skills or familiarity with BigQuery ML for predictive insights. - Knowledge of other BI tools like Power BI, Tableau for cross-platform reporting. - Ability to translate technical concepts for non-technical stakeholders. In addition to the job responsibilities and required skills, the role details are as follows: - Position: Full-Time (40 hours/week) - Start Date: Immediate - Time Zone: Must have at least 4 hours of overlap with U.S. EST for collaboration - Compensations: Competitive (Negotiable),

Role Overview: As an Executive - Quality Assurance (Field Quality), your primary responsibility will be to oversee and ensure the quality of seed production. You will play a critical role in ensuring that all field practices adhere to the highest standards. This position will require extensive knowledge of field production for various crops and will involve frequent travel to different locations. Key Responsibilities: - Design and generate robust standard operating processes (SOPs) for monitoring field production of various vegetable and field crops. - Develop and implement detailed inspection plans and checklists for field quality evaluations. - Conduct regular audits of field operations to assess crop quality and adherence to established protocols. - Analyze data from field inspections to identify areas for improvement and ensure corrective actions are taken. - Work closely with field production teams to ensure proper procedures are followed during all stages of crop growth and development. - Implement best practices for field production to optimize quality and yield. - Maintain accurate records of all field activities and production data, design and generate reports on a regular basis. Qualification Required: - M.Sc. in Seed Science and Technology or a closely related field. - Minimum of 2-3 years of demonstrably successful experience in field quality assurance. - Proven experience in conducting field audits and inspections. - Excellent knowledge of production practices, including planting, fertilization, pest management, and harvesting. - Ability to identify and diagnose potential problems with vegetable and field crops. - Excellent communication, interpersonal, and organizational skills. - Ability to travel to field locations.,

As a Mechanical Design Engineer at PCB Must, you will play a crucial role in the design and development of mechanical equipment. Your responsibilities will include: - Generating General Assembly drawings, Manufacturing drawings, Detail Drawings, and visualizing concepts. - Preparing detailed working diagrams/P&ID of mechanical devices, including dimensions and other engineering information. - Developing detailed design drawings and specifications for mechanical equipment using drafting CAD equipment. - Reviewing and analyzing specifications, sketches, drawings, and related data to assess factors affecting component designs and determine the procedures and instructions to be followed. - Preparing drawings in AutoCAD. - Modifying and revising designs to correct operating shortages and reduce production problems. - Bringing an innovative mindset to the design process. - Proficiency with modeling tools like Solidworks, Unigraphics, etc. - Being proficient in simulation techniques. Qualifications required for this role: - Minimum 1+ years of experience in mechanical design engineering. - Proficiency in AutoCAD and other relevant software. - Strong understanding of mechanical design principles. - Ability to work effectively both independently and as part of a team. - Excellent problem-solving skills and attention to detail. Join PCB Must to enjoy a supportive learning environment, ample opportunities for growth, and recognition through competitive salaries and career advancement. As a Mechanical Design Engineer at PCB Must, you will play a crucial role in the design and development of mechanical equipment. Your responsibilities will include: - Generating General Assembly drawings, Manufacturing drawings, Detail Drawings, and visualizing concepts. - Preparing detailed working diagrams/P&ID of mechanical devices, including dimensions and other engineering information. - Developing detailed design drawings and specifications for mechanical equipment using drafting CAD equipment. - Reviewing and analyzing specifications, sketches, drawings, and related data to assess factors affecting component designs and determine the procedures and instructions to be followed. - Preparing drawings in AutoCAD. - Modifying and revising designs to correct operating shortages and reduce production problems. - Bringing an innovative mindset to the design process. - Proficiency with modeling tools like Solidworks, Unigraphics, etc. - Being proficient in simulation techniques. Qualifications required for this role: - Minimum 1+ years of experience in mechanical design engineering. - Proficiency in AutoCAD and other relevant software. - Strong understanding of mechanical design principles. - Ability to work effectively both independently and as part of a team. - Excellent problem-solving skills and attention to detail. Join PCB Must to enjoy a supportive learning environment, ample opportunities for growth, and recognition through competitive salaries and career advancement.

You are a skilled and detail-oriented Mid-Level Electronics Engineer who will be responsible for designing and developing analog and digital electronic circuits for products and systems. Your role will involve developing embedded firmware for microcontrollers, creating schematics and PCB layouts, conducting prototyping and testing, collaborating with cross-functional teams, and preparing technical documentation. Additionally, you will support production teams, improve existing products, and ensure quality, cost-effective, and reliable designs. Key Responsibilities: - Design and develop analog and digital electronic circuits - Develop embedded firmware for microcontrollers - Create schematics and PCB layouts using tools such as Altium, Eagle, or KiCad - Conduct prototyping, testing, debugging, and validation - Collaborate with mechanical and software teams - Prepare technical documentation including design reports and test cases - Support production teams and troubleshoot issues - Continuously improve product performance, cost, and reliability Qualifications Required: - Bachelor's degree in Electronics Engineering, Electrical Engineering, or related field - 2-5 years of relevant experience in circuit design and embedded development - Proficiency in C/C++ for embedded systems - Strong understanding of microcontrollers, ADCs, sensors, and communication protocols - Experience with PCB layout and simulation tools - Hands-on experience with lab equipment - Ability to read and interpret datasheets and technical documents The company also prefers candidates with the following skills: - Experience with FreeRTOS or other real-time operating systems - Knowledge of IoT protocols such as MQTT, BLE, and Wi-Fi - Familiarity with EMI/EMC and product certification processes - Exposure to Python or MATLAB for signal processing or testing automation This is a full-time, permanent position with an in-person work location. You are a skilled and detail-oriented Mid-Level Electronics Engineer who will be responsible for designing and developing analog and digital electronic circuits for products and systems. Your role will involve developing embedded firmware for microcontrollers, creating schematics and PCB layouts, conducting prototyping and testing, collaborating with cross-functional teams, and preparing technical documentation. Additionally, you will support production teams, improve existing products, and ensure quality, cost-effective, and reliable designs. Key Responsibilities: - Design and develop analog and digital electronic circuits - Develop embedded firmware for microcontrollers - Create schematics and PCB layouts using tools such as Altium, Eagle, or KiCad - Conduct prototyping, testing, debugging, and validation - Collaborate with mechanical and software teams - Prepare technical documentation including design reports and test cases - Support production teams and troubleshoot issues - Continuously improve product performance, cost, and reliability Qualifications Required: - Bachelor's degree in Electronics Engineering, Electrical Engineering, or related field - 2-5 years of relevant experience in circuit design and embedded development - Proficiency in C/C++ for embedded systems - Strong understanding of microcontrollers, ADCs, sensors, and communication protocols - Experience with PCB layout and simulation tools - Hands-on experience with lab equipment - Ability to read and interpret datasheets and technical documents The company also prefers candidates with the following skills: - Experience with FreeRTOS or other real-time operating systems - Knowledge of IoT protocols such as MQTT, BLE, and Wi-Fi - Familiarity with EMI/EMC and product certification processes - Exposure to Python or MATLAB for signal processing or testing automation This is a full-time, permanent position with an in-person work location.

In this role, you will be responsible for designing and developing professional, appealing, high-conversion WordPress websites. Your key responsibilities will include: - Ensuring top-tier performance scores in Core Web Vitals, GTMetrix, and Google PageSpeed. - Managing daily content uploads, blogs, landing pages, and product pages. - Implementing SEO best practices, technical fixes, caching, and performance optimization. - Integrating Google Analytics, Search Console, heatmaps, and tracking tools. - Working closely with the CEO to drive website-based client conversions and lead generation. - Suggesting improvements that directly impact sales, inquiries, and digital presence. Qualifications required for this role include: - 1+ year hands-on experience in WordPress Website Development. - Strong understanding of UI/UX, SEO, and digital performance optimization. - Experience using Elementor, Divi, Custom themes, and plugins. - Ability to create landing pages focused on lead conversion. - Basic knowledge of graphic design (Canva/Adobe XD optional). - Knowledge of GA4, website tracking, lead capture tools. - Self-driven, creative thinker who understands business impact. - Familiarity with Mailchimp, CRM integration, and marketing automation (preferred). Additionally, you will have the opportunity to work with a rapidly growing global tech company where you can have a direct impact on website performance and revenue. You will have the freedom to experiment, suggest ideas, and innovate in a flexible work environment that focuses on results rather than hours. Please note that this position is available as Full-time, Part-time, Permanent, Internship, or Contractual / Temporary, with an expectation of working no less than 30 hours per week. Location: Meerut city, Uttar Pradesh Education: Bachelor's degree preferred Experience: 1 year of experience in WordPress required Work Location: In person,

As a CAD Designer in our company, your role involves creating detailed 2D drawings using AutoCAD and 3D models using SolidWorks for both new and existing products. Your responsibilities will include: - Preparing production-ready technical drawings and design documentation. - Collaborating with production, engineering, and quality teams to ensure accuracy of designs. - Converting product concepts and ideas into visual representations and final designs. - Modifying and revising designs based on feedback from production or clients. - Ensuring all designs comply with industry standards, tolerances, and manufacturing feasibility. - Conducting simulations, stress analysis, and BOM (Bill of Materials) creation in SolidWorks when required. - Maintaining proper documentation of design files, revisions, and version control. - Assisting in prototyping and development of product samples. You will be working full-time on a permanent basis with benefits such as health insurance, yearly bonus, and a day shift schedule at our in-person work location. Please note that this role requires proficiency in AutoCAD and SolidWorks, attention to detail, and the ability to collaborate effectively with cross-functional teams to bring product designs to life.,

Role Overview: As a Mechanical Design Engineer, you will be responsible for designing and developing mechanical components, assemblies, and systems using SolidWorks and AutoCAD. Your key role will involve creating detailed 2D and 3D models and drawings for manufacturing and assembly purposes. Additionally, you will focus on developing and designing moldings with precision and functionality. Collaboration with cross-functional teams to ensure designs meet specific requirements and specifications will be a crucial aspect of your job. Conducting design reviews, providing technical support throughout the product development cycle, analyzing design issues, and offering solutions to enhance product performance and reliability will also be part of your responsibilities. It is essential to maintain accurate documentation of designs, modifications, and specifications. Key Responsibilities: - Design and develop mechanical components, assemblies, and systems using SolidWorks and AutoCAD. - Create detailed 2D and 3D models and drawings for manufacturing and assembly purposes. - Develop and design moldings with a focus on precision and functionality. - Collaborate with cross-functional teams to ensure designs meet specific requirements and specifications. - Conduct design reviews and provide technical support throughout the product development cycle. - Analyze design issues and provide solutions to enhance product performance and reliability. - Maintain accurate documentation of designs, modifications, and specifications. Qualifications: - Bachelor's degree in Mechanical Engineering or a related field. - Proven experience in mechanical design, specifically using SolidWorks and AutoCAD. - Strong knowledge of molding design and manufacturing processes. - Excellent understanding of engineering principles and materials. - Strong problem-solving skills and attention to detail. - Ability to work collaboratively in a team environment and communicate effectively. - Proficiency in CAD software and MS Office Suite. (Note: The job is full-time with benefits such as Provident Fund. The work schedule is during the day shift, with a performance bonus provided. The preferred total work experience required is 8 years, and the work location is in person.),

As an experienced PLC Programmer, your role will involve proficiency in PLC Programming with expertise in ladder logic, structured text, and programming of leading PLC brands like Siemens, Honeywell, or Omron. You will be responsible for integrating SCADA systems, developing HMIs, and ensuring seamless integration with PLC systems. Your experience in troubleshooting and understanding of industrial communication protocols such as Modbus will be crucial for the role. Additionally, your strong technical skills in instrumentation, motion controllers, and servo systems will be essential for successful project execution. You will be expected to read electrical drawings and actively contribute to control systems design. A Bachelors degree in Electrical Engineering, Automation, or a related field will be required for this position. Your ability to work independently and provide on-site support to projects will be highly valued. Prior experience with turnkey projects or exposure to water treatment automation will be advantageous. Key Responsibilities: - Proficiency in PLC Programming with knowledge of ladder logic, structured text, and leading PLC brands - Integration of SCADA systems, HMI development, and PLC systems integration - Troubleshooting technical issues and understanding industrial communication protocols like Modbus - Strong technical skills in instrumentation, motion controllers, and servo systems - Reading electrical drawings and contributing to control systems design - Providing on-site support to projects and working independently - Prior experience with turnkey projects or water treatment automation is a plus Qualifications Required: - Diploma or B.Tech in Electrical, ECE, Instrumentation, Mechatronics, or related field Please note that the company requires candidates who are physically fit to work in industrial environments, comfortable with traveling for installation and site projects, and flexible to work in shifts during commissioning if required. Immediate joiners or those with a short notice period are preferred for this position.,

Role Overview: You will be responsible for developing Android applications to meet the needs of our clients. Key Responsibilities: - Design and build advanced applications for the Android platform - Collaborate with cross-functional teams to define, design, and ship new features - Work with outside data sources and APIs - Unit-test code for robustness, including edge cases, usability, and general reliability - Work on bug fixing and improving application performance Qualifications Required: - Minimum 1 year of experience in Android application development - Proficient in Java, Kotlin, or other programming languages used for Android app development - Strong understanding of Android SDK, different versions of Android, and how to deal with different screen sizes Location: Meerut, Uttar Pradesh (Note: No additional details about the company were provided in the job description),

As a Textile CAD Designer at Sharda Exports Meerut, your primary role will involve designing and creating CADs for product development using the Adobe Photoshop tool. Your responsibilities will include: - Making patterns, sizes, and color options for items such as carpets, poufs, cushions, and benches. - Developing artwork based on images, ideas, and mood boards shared by International Buyers. Qualifications required for this role include: - Experience: 0 to 4 years - Industry Type: Import & Export - Department: Designing - Employment Type: Full Time, Permanent - CTC: 2 to 3.5 LPA Join Sharda Exports and be a part of a dynamic team in the import and export industry, where your creativity and design skills will be put to the test in creating visually appealing textile CADs.,

As a Graphic Designer at our company, you will play a crucial role in creating visually appealing materials for both print and digital media. Your designs will directly impact various campaigns, product launches, and user engagement initiatives. Key Responsibilities: - Design brand-aligned materials such as brochures, banners, UI graphics, and social media content - Create compelling visual assets for digital platforms including websites, social media, ads, dashboards, and presentations - Develop high-quality print materials such as brochures, flyers, posters, banners, and event collaterals - Collaborate with marketing, product, and development teams to transform concepts into effective designs - Ensure visual consistency across all media channels and adhere to brand guidelines - Adapt and optimize designs for different platforms and formats, considering print and digital requirements - Coordinate with printers and vendors to guarantee accurate and high-quality output for physical materials - Manage multiple projects simultaneously and meet tight deadlines consistently Qualifications Required: - Proficiency in Adobe Creative Suite (Photoshop, Illustrator, InDesign) and Figma - Understanding of design principles, typography, color theory, and layout techniques - Experience in creating graphics for websites, social platforms, and email campaigns - Familiarity with print production processes and best practices - Strong communication and collaboration skills - Attention to detail and ability to follow creative direction effectively In addition to the responsibilities and qualifications outlined above, our company offers Provident Fund as a benefit for this full-time position. The work schedule is during the day shift with the possibility of a performance bonus. If you have at least 3 years of professional design experience and possess the necessary skills, we encourage you to apply for this exciting opportunity.,

Role Overview: As a Professor/Associate Professor/Assistant Professor in the Computer Science Engineering Department at the School of Engineering & Technology, your primary responsibility will be to lead and supervise research and teaching activities. This includes teaching a range of undergraduate and graduate courses, conducting independent research, publishing scholarly works, and taking on leadership roles within the department and university. Key Responsibilities: - Develop and deliver undergraduate and graduate courses in computer science engineering, covering areas such as computer systems design, computer networks, software engineering, algorithms, and related topics. - Engage in independent research and collaborate with colleagues and students on various research projects within the field of computer science engineering. - Publish research findings in esteemed academic journals and present research outcomes at national and international conferences. - Provide mentorship and guidance to undergraduate and graduate students involved in research projects and thesis preparation. - Take on leadership roles within the department and university, including leading research groups, participating in committees, and mentoring junior faculty members. - Stay updated with the latest developments and trends in computer science engineering by actively participating in professional organizations and conferences. - Contribute to service activities for the department, university, and profession, such as engaging in community outreach programs and serving on grant review panels. Qualifications: - A Ph.D. in Computer Science Engineering or a related field is mandatory. - Demonstrated excellence in teaching at both undergraduate and graduate levels. - A strong track record of research achievements, including publications in reputable academic journals and presentations at national and international conferences. - Ability to lead and supervise research projects, as well as mentor junior faculty members. - Exceptional communication and interpersonal skills. - Familiarity with current trends and developments in computer science engineering. (Note: This job description may entail additional responsibilities not listed here, as assigned by the department or university.),

As a Brand Development Specialist at Progressive Dynamix, you will play a key role in solidifying the brand identity, logo system, tone, and visual direction of our new brand. Your responsibilities will include: - Developing and implementing effective brand strategies - Managing brand identity and overseeing branding initiatives - Collaborating with cross-functional teams to align brand messaging - Ensuring cohesive branding efforts across various channels To excel in this role, you should possess the following qualifications: - Proficiency in Brand Strategy and Brand Development - Skills in Brand Management and Branding - Strong Communication skills - Creativity and an eye for detail - Ability to work independently while collaborating with teams - Experience with digital and offline branding campaigns is a plus - Bachelors degree in Marketing, Communications, Business, or a related field If you have experience in branding and identity design and are interested in working with early-stage brands, we would love to discuss how you can contribute to our team. We look forward to hearing from you!,