118 Fabrication Supervisor Jobs in Gurgaon

You will be responsible for operating, programming, and maintaining SAW (Submerged Arc Welding) and Plasma cutting machines used in the fabrication of LGFS (Light Gauge Framing System) and PEB (Pre-Engineered Building) components. Your role will involve ensuring precision machining, smooth operations, and adherence to quality and safety standards. - Operate and monitor SAW and Plasma machines for cutting, welding, and fabrication of LGFS and PEB materials. - Set up machines, load raw materials, and ensure correct parameters as per design and drawing. - Perform machine programming, calibration, and preventive maintenance. - Inspect finished components for accuracy, quality, and dimensional tolerance. - Identify and resolve any process or mechanical issues during operation. - Maintain daily production logs and follow all safety and quality compliance procedures. - Coordinate with production, maintenance, and quality control teams for process improvement. - Proficient in SAW and Plasma machine operation, programming, and maintenance. - Hands-on experience with LGFS and PEB fabrication processes. - Ability to interpret technical drawings and welding parameters. - Strong knowledge of fabrication standards and industrial safety. - Good troubleshooting and problem-solving skills. Qualifications: - ITI / Diploma in Mechanical, Production, or Fabrication Technology. - Minimum 2 years of experience in machine operation within LGFS / PEB industry. Please note that the benefits include Provident Fund. The work location is in person.,

As a Graduate Engineer Trainee at CRA, you will be supporting the engineering and production teams in the Energy and Defence sectors. You will receive hands-on training in manufacturing processes, quality control, and cross-functional collaboration. Key Responsibilities: - Assist in production, quality, and design activities. - Learn fabrication, machining, and assembly processes. - Interpret 2D/3D engineering drawings and technical documents. - Support process improvements (5S, Lean, Kaizen). - Coordinate across departments and prepare documentation. Qualifications Required: - Bachelor's/Diploma in Mechanical, Electrical, or Process Engineering. - Basic knowledge of manufacturing and engineering concepts. - Good communication, problem-solving, and learning attitude. - CAD and MS Office proficiency is a plus. In addition to the above responsibilities and qualifications, at CRA, you can expect structured training & mentorship, a competitive stipend/salary, career growth opportunities, and exposure to high-impact engineering projects.,

As a Fabrication Shop Head at Goodflame Appliances, your role will involve overseeing daily fabrication operations, ensuring optimal resource allocation, and implementing production plans to meet project deadlines. You will be responsible for managing manufacturing workflows, maintaining quality standards, enforcing compliance with Good Manufacturing Practices (GMP), and driving continuous improvement initiatives. In addition, you will need to supervise teams and coordinate with cross-functional departments to achieve operational goals. Key Responsibilities: - Oversee daily fabrication operations - Ensure optimal resource allocation - Implement production plans to meet project deadlines - Manage manufacturing workflows - Maintain quality standards - Enforce compliance with Good Manufacturing Practices (GMP) - Drive continuous improvement initiatives - Supervise teams - Coordinate with cross-functional departments to achieve operational goals Qualifications: - Expertise in Production Planning and Manufacturing processes - Strong skills in Operational Excellence and Operations Management - Knowledge of and adherence to Good Manufacturing Practices (GMP) - Ability to lead teams and foster collaboration in a manufacturing environment - Experience in implementing process improvements for increased efficiency and quality - Strong problem-solving skills and a focus on achieving operational objectives As a Fabrication Shop Head at Goodflame Appliances, your role will involve overseeing daily fabrication operations, ensuring optimal resource allocation, and implementing production plans to meet project deadlines. You will be responsible for managing manufacturing workflows, maintaining quality standards, enforcing compliance with Good Manufacturing Practices (GMP), and driving continuous improvement initiatives. In addition, you will need to supervise teams and coordinate with cross-functional departments to achieve operational goals. Key Responsibilities: - Oversee daily fabrication operations - Ensure optimal resource allocation - Implement production plans to meet project deadlines - Manage manufacturing workflows - Maintain quality standards - Enforce compliance with Good Manufacturing Practices (GMP) - Drive continuous improvement initiatives - Supervise teams - Coordinate with cross-functional departments to achieve operational goals Qualifications: - Expertise in Production Planning and Manufacturing processes - Strong skills in Operational Excellence and Operations Management - Knowledge of and adherence to Good Manufacturing Practices (GMP) - Ability to lead teams and foster collaboration in a manufacturing environment - Experience in implementing process improvements for increased efficiency and quality - Strong problem-solving skills and a focus on achieving operational objectives

As part of Arabelle Solutions, a proud member of EDF Group, you will be working alongside passionate and bright individuals dedicated to designing services and solutions that will benefit not only the present but also future generations. We believe in fostering a supportive culture that values diversity and inclusivity to achieve common goals. **Role Overview:** You will be responsible for driving quality for assigned suppliers, implementing quality plans, selecting suppliers through qualification processes, and owning supplier results. Your role will involve driving improvements utilizing supplier scorecards, conducting supplier audits for compliance, and developing conceptual knowledge in your professional discipline. You may also provide support with specialized expertise or technical knowledge in a specific area. **Key Responsibilities:** - Drive a strong culture of EHS, Nuclear Safety, CFSI, Quality, Compliance, and Lean principles at supplier works. - Track key performance indicators (KPIs) such as Documentation and inspection FPY, on-time delivery, NCR, Cost of Poor Quality (CoPQ), etc., and drive continuous improvement. - Implement internal procedures during qualification and coordinate with sourcing, project quality, and engineering teams during execution. - Lead Supplier Quality Improvement Programs to enhance supplier performance. - Conduct proactive supplier audits to minimize risks and eliminate product/process issues. - Maintain detailed reports on supplier quality, defect rates, and areas needing improvement. - Conduct tests and assessments on products to identify quality issues and encourage a culture of support, cooperation, trust, and open reporting. **Qualifications Required (SQE):** - Bachelor's degree in mechanical engineering. - 10-12 years of proven experience in manufacturing and vendor development. - Strong statistical analysis and quality assurance skills. - Ability to provide guidance for improving process efficiency. - Excellent communication skills. - ASNT Level-II and/or ISO 9712 Level-II in UT, RT, MT & PT. - Proficiency in Microsoft Office, Smart Sheet, Tableau, SAP, etc. - Knowledge of international codes and standards such as ASME, EN, ISO, ASTM, DIN, BIS, etc. Join our global teams at Arabelle Solutions, where diversity is celebrated with team members from over 49 nationalities across 16 countries. Together, we make teams and businesses stronger.,

A Fabrication Specialist transforms raw materials into finished products by cutting, shaping, and assembling components according to technical specifications. Their role involves interpreting blueprints and using a variety of tools and machinery to produce items for diverse industries like construction, automotive, and aerospace A Fabrication Specialist transforms raw materials into finished products by cutting, shaping, and assembling components according to technical specifications. Their role involves interpreting blueprints and using a variety of tools and machinery to produce items for diverse industries like construction, automotive, and aerospace A Fabrication Specialist transforms raw materials into finished products by cutting, shaping, and assembling components according to technical specifications. Their role involves interpreting blueprints and using a variety of tools and machinery to produce items for diverse industries like construction, automotive, and aerospace A Fabrication Specialist transforms raw materials into finished products by cutting, shaping, and assembling components according to technical specifications. Their role involves interpreting blueprints and using a variety of tools and machinery to produce items for diverse industries like construction, automotive, and aerospace A Fabrication Specialist transforms raw materials into finished products by cutting, shaping, and assembling components according to technical specifications. Their role involves interpreting blueprints and using a variety of tools and machinery to produce items for diverse industries like construction, automotive, and aerospace

Job Title: CNC Operator / Machinist (HMC / VMC) Industry: Manufacturing Location: Faridabad Employment Type: Permanent Role Overview As a CNC Operator/Machinist (HMC/VMC), you will work with minimal supervision to set up and operate CNC machines for precision machining tasks involving the fabrication and modification of machine parts, tools, and equipment. Key Responsibilities Setup and operate CNC-controlled heavy machinery to produce precision parts Perform machining operations including cutting, grinding, drilling, etc. Adjust machine settings (speed, feed, tooling, etc.) for quality output Inspect finished components to ensure they meet tolerance and quality standards Use measuring instruments such as gauges, micrometers, and calipers Safely handle tools, fixtures, and machining accessories Analyze issues and modify setups if required Work closely with engineering and production teams to resolve machining challenges Follow ISO guidelines, safety procedures, and 5S housekeeping requirements Support continuous improvement practices using lean tools Qualification Required Diploma / ITI in Mechanical Engineering OR BE / Equivalent Minimum 1+ year experience in CNC machining (HMC/VMC preferred) How to Apply Email: Contact: +91 9643058270 , 9821783627 HR NAAM Consultancy  

 key Responsibilities:Handle complete production process (from raw material to final dispatch)Strong knowledge of Casting, Forging, Fabrication, and Sheet Metal processes when, where, and why to use eachUnderstand production capacity and cycle times per machine/processTrack Planned vs. Actual production progress, ensure quality checksCreate and review BOM (Bill of Material) from production drawingsExpertise in Drawing Reading, Drawing Creation & AutoCADCoordinate with shop floor workers & supervisors, ensuring discipline and productivityApply material grade knowledge to achieve product reliabilityExperience in CNC Machine, Lathe Machine, Milling Machine, and CNC ProgrammingKnowledge of Casting, Forging, Material Knowledge, and MetallurgyHands-on with Measuring Instruments @Vernier Caliper, @Micrometer, @Hardness TesterUnderstanding of Cutting, Bending, Welding, Finishing processesSkilled in GA Drawing, Manufacturing Drawing, and BOM CreationAbility to handle multi-product manufacturing (1000-5000 products) and process understanding  Profile: Production Engineer Salary: up to 4LPA Location: Sihani Chungi- Ghaziabad Working days: 6days Industry: Industrial equipment & machinery Working days: 6days Experience: up to 4 years  Interested Candidate Can Contact Us Contact No: 7011387599 Mail Id: hr.nehasrexpert@gmail.com Sandhya ( HR Executive )  

As an ITI Welder at Tetrahedron Manufacturing Services Pvt. Ltd., you will be responsible for assisting in various operations including fabrication, welding, quality control (QC), and other shop-floor activities. The ideal candidate should be technically sound, a good team player, and capable of working in a fast-paced industrial environment. Key Responsibilities: - Perform welding operations as per project requirements (MIG, TIG, Arc welding, etc.) - Assist the fabrication team in cutting, assembling, and shaping metal structures - Support the Quality Control team in ensuring welding and fabrication meet quality standards - Read and interpret technical drawings, blueprints, and welding symbols - Maintain welding equipment and ensure a safe working environment - Follow safety procedures and protocols at all times - Assist in regular maintenance and housekeeping of workshop machinery and tools - Coordinate with other departments for timely completion of tasks - Report defects, deviations, or safety concerns to supervisors Qualifications Required: - ITI in Welding (mandatory) - Experience: 02 years (freshers with hands-on training can apply) - Ability to read and understand engineering drawings - Familiarity with different welding techniques and materials - Physically fit and able to work in challenging conditions - Strong work ethic, punctuality, and attention to detail - Team-oriented with good communication skills About Company: Tetrahedron Manufacturing Services Pvt. Ltd., founded in 2014, is one of India's largest end-to-end service providers for manufacturing companies. With a strong focus on Manufacturing Excellence, Training Services, High-Tech Consulting, Industry 4.0 solutions, and Low-Cost Automation (LCA), we are revolutionizing Indian manufacturing with smart, scalable, and sustainable solutions. Our team comprises passionate professionals from premier institutes dedicated to providing innovative solutions to our 150+ active clients across India. As an ITI Welder at Tetrahedron Manufacturing Services Pvt. Ltd., you will be responsible for assisting in various operations including fabrication, welding, quality control (QC), and other shop-floor activities. The ideal candidate should be technically sound, a good team player, and capable of working in a fast-paced industrial environment. Key Responsibilities: - Perform welding operations as per project requirements (MIG, TIG, Arc welding, etc.) - Assist the fabrication team in cutting, assembling, and shaping metal structures - Support the Quality Control team in ensuring welding and fabrication meet quality standards - Read and interpret technical drawings, blueprints, and welding symbols - Maintain welding equipment and ensure a safe working environment - Follow safety procedures and protocols at all times - Assist in regular maintenance and housekeeping of workshop machinery and tools - Coordinate with other departments for timely completion of tasks - Report defects, deviations, or safety concerns to supervisors Qualifications Required: - ITI in Welding (mandatory) - Experience: 02 years (freshers with hands-on training can apply) - Ability to read and understand engineering drawings - Familiarity with different welding techniques and materials - Physically fit and able to work in challenging conditions - Strong work ethic, punctuality, and attention to detail - Team-oriented with good communication skills About Company: Tetrahedron Manufacturing Services Pvt. Ltd., founded in 2014, is one of India's largest end-to-end service providers for manufacturing companies. With a strong focus on Manufacturing Excellence, Training Services, High-Tech Consulting, Industry 4.0 solutions, and Low-Cost Automation (LCA), we are revolutionizing Indian manufacturing with smart, scalable, and sustainable solutions. Our team comprises passionate professionals from premier institutes dedicated to providing innovative solutions to our 150+ active clients across India.

As a QA Manager for the Fabrication department at Primate Consulting, your role will involve overseeing quality assurance processes to ensure that all products meet industry standards and regulations. You will be responsible for planning and executing quality control systems, leading a team of quality inspectors, addressing quality concerns, and implementing corrective action plans. Additionally, you will collaborate with production and engineering teams to maintain optimal standards in processes and outcomes. Key Responsibilities: - Plan and execute quality control systems in the fabrication unit - Lead a team of quality inspectors to ensure adherence to quality standards - Address quality concerns and implement corrective action plans - Liaise with production and engineering teams to maintain optimal standards Qualifications: - Strong expertise in Quality Assurance, Quality Control, and managing operational standards in fabrication or related industries - Knowledge of fabrication processes, inspection methods, and industry-specific standards - Leadership and team management skills, with experience in coordinating with cross-functional teams - Analytical, problem-solving, and decision-making skills, with the ability to develop and enforce corrective action plans - Familiarity with quality management systems and regulatory compliance - Relevant experience in manufacturing or engineering is highly desirable - Educational background in Engineering, Quality Management, or a related field preferred,

Role Overview: You will be joining the Lab on chip & Biosensors Group led by Prof. Sandeep K. Jha at Centre for Biomedical Engineering, IIT Delhi as a full-time on-site Microfabrication Engineer/Scientist specializing in Microfluidics development. Your daily tasks will involve Photolithography or Direct Maskless lithography based glass-PDMS and SU-8 moulding type rapid Microfluidic prototyping, with a focus on applications in Biomedical or Biotech domains. Immobilization within microchannel knowledge or experience will be an added advantage. This position is based at the IIT Delhi campus in Delhi, India. Key Responsibilities: - Hands-on experience with Photolithographic techniques - Proficiency in Microfluidics development - Strong analytical and problem-solving skills - Excellent communication and collaboration abilities Qualifications: - M.Tech. degree in any Engineering with Microfabrication experience Additional Company Details: The Lab on chip & Biosensors Group at Centre for Biomedical Engineering, IIT Delhi is a leading research team in India specializing in microfluidics, point-of-care biosensors, and embedded systems for clinical applications. Established in 1961, IIT Delhi is recognized as a National Centre of Excellence for training, research, and development in science, engineering, and technology in India. In 2018, it was granted the special status of Institution of Eminence (IoE) by the Govt. of India, allowing for greater autonomy in academic pursuits and collaborations. Note: Candidates who have completed a Ph.D. degree and those lacking hands-on experience in Microfab and Photolithography will not be considered for this position.,

As a Senior Engineer in Offshore Renewable Structures at InSolare Energy Ltd., you will play a crucial role in leading the design and construction of various floating bodies and auxiliaries for offshore renewable projects such as floating solar platforms, service pontoons, and near-shore structures. Your responsibilities will encompass a wide range of tasks including design, materials engineering, fabrication oversight, and mooring system development from the initial concept phase to the final commissioning stage. Key Responsibilities: - Design various components of floating structures including frames, decks, bulkheads, joints, stability, and buoyancy. - Develop and conduct testing on welded, bolted, and polymer joints using materials such as MS, SS, HDPE, and composites. - Create designs and sizes for mooring and anchoring systems based on metocean conditions. - Optimize structures for factors such as weight, cost, stiffness, and corrosion protection. - Supervise fabrication processes, quality assurance/quality control procedures, non-destructive testing, and integration at the yard/site. Essential Qualifications: - B.E./B.Tech degree in Marine, Mechanical, or Naval Architecture. - 4-12 years of experience in shipbuilding, offshore, or floating-solar fabrication. - Demonstrated hands-on expertise in joining materials like MS and HDPE, designing leakproof compartments, and conducting structural calculations. - Proficiency in mooring design and its practical implementation. - Willingness to travel to yards/sites and collaborate closely with fabricators. Preferred Qualifications: - Postgraduate degree in Naval Architecture or Offshore Engineering. - Exposure to projects involving floating solar, near-shore structures, or workboats. - Knowledge of composites, metocean loads, corrosion mechanisms, and fatigue properties. - Familiarity with vendor development processes for offshore components. About InSolare Energy Ltd.: With a rich history of over 16 years in the renewable energy sector, InSolare is at the forefront of developing Net-Zero solutions encompassing floating solar, offshore wind, and marine-integrated systems. The R&D team at InSolare specializes in designing and deploying robust floating platforms and hardware that meet both Indian and global standards. If you are passionate about renewable energy and possess the required qualifications and experience, we encourage you to apply for the position of Senior Engineer in Offshore Renewable Structures at InSolare Energy Ltd. Send your resume (and any optional project/portfolio files) to hr@insolare.com with the subject line "Application - Senior Engineer, Offshore Renewable Structures".,

As a Glass, Aluminium & SS Railing Supervisor at Shankar Fenestrations and Glasses (India) Pvt. Ltd., your role involves overseeing material, receiving products from the factory, site execution, installation, and ensuring quality assurance for railing projects. Your technical expertise, on-site management skills, and coordination abilities will be crucial in ensuring timely and accurate project delivery. **Key Responsibilities:** - Supervise and coordinate the material, production, and installation of stainless steel, glass, and aluminium railings at project sites. - Review and interpret technical drawings, fabrication details, and installation plans. - Manage site teams, allocate manpower, and monitor daily progress to meet project timelines. - Ensure adherence to safety standards, quality benchmarks, and company guidelines. - Coordinate with project managers, contractors, and clients for smooth execution. - Inspect materials and installation quality to ensure compliance with specifications. - Maintain accurate records of site work, material consumption, and manpower utilization. - Identify and resolve technical or site-related issues proactively. - Report progress updates and challenges to the Project Manager regularly. **Required Skills & Qualifications:** - Minimum qualification of 12th grade and above. - Diploma/ITI/Graduation in Civil, Mechanical, or related field (preferred). - 3-7 years of experience in site supervision of SS, glass, or aluminium railing projects. - Strong knowledge of materials, fittings, and installation methods. - Ability to read and understand technical drawings. - Good communication, leadership, and coordination skills. - Willingness to travel to sites within Delhi NCR and occasionally outside regions. - Proficient in basic reporting and MS Office tools. At Shankar Fenestrations and Glasses (India) Pvt. Ltd., we are a top provider of premium glass, aluminium, and stainless-steel railing solutions for residential, commercial, and industrial projects. With a strong reputation for quality craftsmanship and timely delivery, we specialize in architectural glazing, aluminium doors/windows, and faade/door-window/railing systems installations across India. If you meet the qualifications and are ready to take on this challenging yet rewarding role, we encourage you to apply by sending your updated resume to info@shankarglass.com, hr@shankarglass.com, or ashutoshpratap@shankarglass.com with the subject line "Application for SS, Glass & Aluminium Railing Supervisor [Your Name]".,

As a Project Execution Manager - Piping Fabrication for a company in Delhi, India, your role will involve overseeing project execution activities. You will ensure that timelines are met, coordinate with various stakeholders, and manage the implementation of fabrication processes. Your responsibilities will include supervising logistics, inspections, expediting, and reporting to ensure the smooth progression of piping fabrication projects while upholding quality and safety standards. Key Responsibilities: - Oversee project execution activities for piping fabrication projects - Ensure timelines are met and coordinate with stakeholders - Manage the implementation of fabrication processes - Supervise logistics, inspections, expediting, and reporting Qualifications Required: - Proficiency in expediting and prior experience as an Expeditor - Strong skills in Project Management and Inspection - Competence in Logistics Management - Excellent organizational, communication, and leadership abilities - Bachelor's degree in Engineering or a related field preferred - Relevant work experience in the piping fabrication or manufacturing industry - Ability to work on-site and effectively coordinate across multiple teams,

As a skilled and experienced SAW (Submerged Arc Welding) Operator, you will join the fabrication team at ENGKO Engineering Pvt. Ltd. in Ghaziabad. Your primary responsibility will be to operate SAW machines for welding structural steel components according to design and quality standards. Key Responsibilities: - Operate and maintain SAW welding machines efficiently. - Read and interpret fabrication drawings and welding symbols. - Perform setup, alignment, and fitting of steel components before welding. - Inspect welded joints for quality and accuracy. - Ensure adherence to safety protocols and company welding standards. - Maintain cleanliness and organization of the work area. Requirements: - Minimum 12 years of experience as a SAW Welder Operator in a fabrication or PEB industry. - Knowledge of welding parameters, consumables, and equipment troubleshooting. - Ability to work in a team-oriented, fast-paced production environment. In addition to the above, ENGKO Engineering Pvt. Ltd. is a leading manufacturer of Pre-Engineered Buildings (PEB), Prefabricated Structures, Factory Sheds, and Warehouses across India. Committed to quality, precision, and value-driven construction solutions, we offer competitive salary based on experience, overtime, and performance-based incentives. Join us for career growth opportunities in a reputed engineering organization. Interested candidates can send their resume to: Email ID: shuklaankit7084@gmail.com Mobile: 7084433669 To learn more about us, visit our website at www.engko.co.in.,

As a Mechanical Engineer or Diploma holder with 8-10 years of experience in a fabrication unit or a Graduate Engineer with 6-8 years of experience in a fabrication unit, you are expected to have the following skills: - Knowledge of production planning and control and ASME Codes - Knowledge of all Fabrication activities including raw material (Flanges, Fittings, Gasket, Fastener, Pipe etc.) and process (Welding, assembly, painting, Radiography etc.) Your key responsibilities will include: - Preparing, issuing, scheduling, and controlling schedules and material requirements in compliance with approved manufacturing drawings/documents - Managing manpower and supervising the manufacturing process - Developing best manufacturing practices to reduce quality and time - Working towards assigned production targets to meet project delivery timelines Qualifications Required: - Mechanical Engineering/Diploma holders with 8-10 years of experience in a fabrication unit or Graduate Engineers with 6-8 years of experience in a fabrication unit. Please note that this is a full-time position with a day shift schedule.,

Role Overview: As a candidate for this position, you will be expected to have experience in Solid Works and AutoCAD. Candidates with a background in Conveyor Industries and Automation Industries will be given preference. Key Responsibilities: - Solid Works Part Modeling, Assembly Modeling, nesting, drawing Creation, etc. - Knowledge of Sheet metal Fabrication, Machining processes, symbols dimensional tolerance, and GD &T. - Understanding and creation of complex fabrication & Machining Drawings. - Experience in special purpose machines. - 3D Modeling, Drafting, Product Data Generation. - Project Coordination and task Distribution. - BOM Preparation, Project Management. Qualifications Required: - Proficiency in Solid Works and AutoCAD. - Experience in Conveyor Industries or Automation Industries. - Knowledge of Sheet metal Fabrication and Machining processes. - Familiarity with dimensional tolerance, GD &T, and complex fabrication drawings. - Previous experience with special purpose machines. Please note that this is a full-time position with a day shift schedule and the work location is in person.,

As a Production Supervisor for heavy fabrication with MIG WELDING knowledge, your role will involve overseeing the production process and ensuring efficiency. Your responsibilities will include: - Implementing 5S and Kaizen principles to improve production efficiency - Handling manpower effectively to meet production targets - Ensuring safety protocols are followed in the production area Qualifications required for this role: - Prior experience in heavy fabrication and MIG WELDING - Knowledge of 5S and Kaizen principles - Ability to effectively handle manpower and prioritize tasks The company provides benefits such as health insurance and Provident Fund. The work location for this role is in person.,

You will be responsible for creating detailed 3D digital sculptures, reliefs, and wall murals using ZBrush to bring concepts to life. Your role will involve refining forms, anatomy, drapery, and intricate detailing to meet aesthetic and technical requirements. Additionally, you will collaborate closely with concept artists, 3D modelers, and architects to ensure visual consistency and style. Your contribution to artistic reviews will be crucial in maintaining quality, realism, and adherence to project timelines. It is important for you to work with production pipelines, adhere to naming conventions, and follow file management standards. Your ability to conceptualize references into models with proper scale, perspective, and proportions will be essential, while knowledge of architectural scale is a plus. Key Responsibilities: - Create high-resolution 3D sculpts in ZBrush for characters, creatures, environments, or products. - Refine forms, anatomy, drapery, and intricate detailing to meet aesthetic and technical requirements. - Collaborate closely with concept artists, 3D modelers, and architects to maintain visual consistency and style. - Contribute to artistic reviews, ensuring quality, realism, and adherence to project timelines. - Work with production pipelines and adhere to naming conventions and file management standards. - Ability to conceptualize references into models with proper scale, perspective, and proportions. - Knowledge of architectural scale is a plus. Required Skills & Experience: - Proficiency in ZBrush. - Solid understanding of human/creature anatomy, gesture, expressions, and proportion. - Experience with hard-surface and organic sculpting. - Familiarity with software such as Maya, Blender, 3ds Max, and KeyShot. - Understanding of 3D printing workflows, with CNC stone carving preferred. - Artistic eye for form, silhouette, texture, and surface detail. - Strong portfolio showcasing sculpting proficiency. Preferred Qualifications: - Bachelors degree or diploma in Fine Arts, 3D Design, Animation, or a related field. - 2+ years of experience in a professional 3D production environment. - Experience working with render-ready assets or digital fabrication projects. - Knowledge of Marvelous Designer or Nomad Sculpt is a plus. Soft Skills: - Excellent attention to detail and a passion for craftsmanship. - Ability to take and apply feedback constructively. - Strong communication and collaboration skills. - Organized and deadline-oriented mindset. Note: This job is full-time and permanent with benefits including paid sick time. The work location is in person. You will be responsible for creating detailed 3D digital sculptures, reliefs, and wall murals using ZBrush to bring concepts to life. Your role will involve refining forms, anatomy, drapery, and intricate detailing to meet aesthetic and technical requirements. Additionally, you will collaborate closely with concept artists, 3D modelers, and architects to ensure visual consistency and style. Your contribution to artistic reviews will be crucial in maintaining quality, realism, and adherence to project timelines. It is important for you to work with production pipelines, adhere to naming conventions, and follow file management standards. Your ability to conceptualize references into models with proper scale, perspective, and proportions will be essential, while knowledge of architectural scale is a plus. Key Responsibilities: - Create high-resolution 3D sculpts in ZBrush for characters, creatures, environments, or products. - Refine forms, anatomy, drapery, and intricate detailing to meet aesthetic and technical requirements. - Collaborate closely with concept artists, 3D modelers, and architects to maintain visual consistency and style. - Contribute to artistic reviews, ensuring quality, realism, and adherence to project timelines. - Work with production pipelines and adhere to naming conventions and file management standards. - Ability to conceptualize references into models with proper scale, perspective, and proportions. - Knowledge of architectural scale is a plus. Required Skills & Experience: - Proficiency in ZBrush. - Solid understanding of human/creature anatomy, gesture, expressions, and proportion. - Experience with hard-surface and organic sculpting. - Familiarity with software such as Maya, Blender, 3ds Max, and KeyShot. - Understanding of 3D printing workflows, with CNC stone carving preferred. - Artistic eye for form, silhouette, texture, and surface detail. - Strong portfolio showcasing sculpting proficiency. Preferred Qualifications: - Bachelors degree or diploma in Fine Arts, 3D Design, Animation, or a related field. - 2+ years of experience in a professional 3D production environment. - Experience working with render-ready assets or digital fabrication projects. - Knowledge of Marvelous Designer or Nomad Sculpt is a plus. Soft Skills: - Excellent attention to detail and a passion for craftsmanship. - Ability to take

As a Principal Engineer - Piping on mining projects, your role involves in-depth knowledge of piping design codes and standards such as ASME B31.3, ASME B31.4, and ASME B31.8. You will be responsible for designing and developing piping systems and components, reviewing detailed piping layout drawings, and collaborating with the project team to ensure compliance with project specifications and industry standards. Your responsibilities will also include reviewing design specifications, vendor management, technical evaluations, and ensuring compliance with industry standards for piping items. Key Responsibilities: - Design and develop piping systems and components - Review detailed piping layout drawings and bill of materials - Collaborate with the project team to ensure compliance with specifications and standards - Review design specifications, manage vendors, conduct technical evaluations - Prepare valve material specifications and RFQs for piping bulk items Qualifications Required: - 14-18 years of experience in piping, static, rotary equipment engineering - Bachelor's degree in mechanical engineering, preferred master's degree - PG diploma or certificate in Piping engineering would be an asset - Strong organizational, technical, and communication skills - Familiarity with working in a LEAN environment - Excellent written and verbal communication skills in English - C. Eng, P. Eng qualification would be an added advantage About the Company: WSP is a leading professional services consulting firm dedicated to local communities and driven by international expertise. With a focus on technical solutions in various sectors, including Transportation & Infrastructure, Property & Buildings, Earth & Environment, Power & Energy, Resources, and Industry, WSP is committed to engineering projects for sustainable growth. With a global presence and a diverse team of experts, WSP aims to tackle complex challenges and provide innovative solutions for the future. Joining WSP means being part of a collaborative team that thrives on challenges and unconventional thinking. You will have the opportunity to work on landmark projects, connect with industry leaders, and shape a fulfilling career in a culture that values diversity, inclusion, and personal growth. Apply today to be a part of a global network of passionate professionals dedicated to making a positive impact in communities worldwide.,

As a Mechanical Engineer in this role, you will be responsible for designing, prototyping, and developing mechanical components and systems integral to the product. You will collaborate with cross-functional teams spanning product development, electronics, biology, materials, and manufacturing to drive the project from concept to implementation. Additionally, you will take a leadership role in building and managing the mechanical engineering team, ensuring the successful delivery of innovative solutions that meet and exceed product expectations. This position requires adaptability and a proactive approach to integrating cutting-edge mechanical design principles into a transformative 3D fabrication system. **Responsibilities:** - Lead the design and development of the 3D printer machine from concept to completion. - Collaborate with international experts from various fields, including biology, material science, and electronics, to ensure the machine meets project requirements. - Oversee the implementation of manufacturing processes to produce the machine. - Analyze and apply principles of fluid dynamics and microscale fabrication to enhance machine functionality. - Optimize the machine with automation features with an easy-to-use interface. - Use CAD software (e.g., SolidWorks, AutoCAD) to create 3D models, assemblies, and detailed drawings, incorporating prototyping capabilities. - Identify opportunities for design optimization, cost reduction, and performance enhancements, with a focus on manufacturability. Manage both mechanical-specific tasks and interdisciplinary projects, ensuring smooth integration across departments. **Qualifications:** - Bachelors, Masters, or Ph.D. in Mechanical Engineering, Mechatronics, Manufacturing, or a related field. - Minimum of 3 years of industrial experience in relevant areas. - Strong expertise in CAD design, manufacturing standards, and 3D prototyping. - Knowledge and practical experience in manufacturing processes. - Strong understanding of fluid dynamics and microscale fabrication. - Experience in the 3D printing or biofabrication industry is a significant advantage. - Effective communication skills, with the ability to collaborate across multidisciplinary teams and articulate technical and non-technical information clearly. - Experience with rapid prototyping techniques, including additive manufacturing, traditional manufacturing, and machining technologies. - Familiarity with regulatory requirements and standards relevant to product design and development is a plus.,