1 Loop Diagrams Jobs nearby Coimbatore

As a potential candidate, you will be expected to fulfill the following responsibilities: - Become fully familiar with the Contract Scope of Work, specifications, schedule, and all inter-discipline requirements, including identifying concerns early and addressing them promptly. - Study and understand the E&I design scope of work, being conversant with Company and Client procedures, standards, and applicable international codes and standards. - Identify changes to scope and raise change notification in the Change Management System promptly, providing necessary supporting documentation and estimates. Support Variation Orders similarly. - Interface with all disciplines to develop clash-free designs and obtain input for discipline designs and drawings from other disciplines. - Liaise with other discipline support groups to ensure clearly defined interfaces, deliverables, and schedules are met, documenting substantive communications. - Assist Discipline Lead in preparing estimates for proposals and job scope changes, including execution statements, work schedules, and man-hour requirements. - Set up and maintain the Discipline Master design drawing and document files, including final archiving. - Prepare and review Discipline deliverables such as 3D model, detailed design drawings, as-built drawings, MTO extraction, and Preparation. - Support the import and export of reference models to PDMS / E3D from vendor inputs. - Review vendor drawings deliverables in line with project requirements. - Maintain state-of-the-art knowledge in its discipline according to applicable codes and standards. - Knowledge of AVEVA Electrical and AVEVA Instrumentation will be an added advantage. Qualifications Required: - Diploma in Electrical and Electronics Engineering or Diploma in Electronics and Instrumentation Engineering or Diploma in Instrumentation and Control Engineering. Experience: - 10+ years of Industry experience. - Prior work experience in the design of Oil & Gas production facilities, skid-based design deliverables, site engineering support for construction, precommissioning, and commissioning activities. Expertise: - Prepare / Review Electrical Design Deliverables such as 3D model E&I scopes, one-line diagrams, schematics, interconnection and wiring diagrams, block diagrams, area classification drawings, conduit and cable schedules, power layout drawings, cable tray layouts, earthing and lightning protection layout drawings, lighting layout drawings, electrical cable tray drawings, electrical equipment layouts, E&I support drawings, cable blocks diagram, cable & Junction Box schedule, instrument hook up (pneumatic and process) diagram, installation standards, loop diagram, fire & gas equipment layout, PA system, MCT arrangements, etc. - Thorough understanding of Interdisciplinary interfaces.,

Role Overview: As an Instrumentation Designer with experience in SP3D/E3D, you will play a crucial role in our team working on cutting-edge projects in the Oil & Gas and Power Plant sectors. Your qualifications should include a Diploma in Electronics & Instrumentation or a B.E./B.Tech degree. Immediate joiners to 3 months notice period are preferred. Your industry experience in Oil & Gas/Power Plant design & detail engineering will be valuable. Key Responsibilities: - Preparing Cable Block Diagrams, JB Wiring, and Loop Drawings - 3D Modelling of instruments, valves, cable trays/trenches, flow meters, etc. using SP3D/E3D - Creating Instrument Location Layouts and Control Room Layouts - Cable Tray/Trench Routing and layout extraction - Designing F&G, CCTV, and Telecom Layouts - Conducting Inter-Discipline Checks and addressing model review comments (30%, 60%, 90%) - Delivering Cable Schedules, Hook-Ups, and Material Take-Offs (MTO) Qualification Required: - Diploma in Electronics & Instrumentation or B.E./B.Tech degree Join our team in Chennai or Bangalore and be a part of exciting projects in the field of Instrumentation design.,

Role Overview: You have an exciting full-time opportunity as an Instrumentation Designer at Tecnicas Reunidas group (TR), a leading Oil & Gas International Engineering and Construction Company. As an organized and motivated team player, you will be responsible for Instrumentation Design tasks such as Instrument / JB Modelling, Cable tray modelling, Trench and Duct Bank Routing, and preparation of various layouts and diagrams. Key Responsibilities: - Perform Instrument / JB Modelling using SP3D and/or PDS. - Model cable tray including tray supports using SPBD and/or PDS. - Route Trench and Duct Banks in SP3D and/or PDS. - Prepare Electronic Instrument Layout and pneumatic Layout. - Create Main cable tray routing layout and extract 2D from 3D model. - Set up wiring in SP-INTools for Instruments and Control/Safety Systems. - Develop Loop diagram, Termination Diagram, Instrument Segment Diagrams, and Instrument Installation Drawing. - Generate Junction Box Schedule, Cable Schedule, Drum Schedule, Control room Cable Routing, Equipment Layout, Cable Block Diagram, and Bulk MTO. - Complete Hookup assignment in SP and generate drawings. Qualification Required: - Diploma in Engineering with a minimum of 10-15 years of relevant design experience in oil & gas, petrochemical, and Refinery. - Experience in Instrumentation design, including 3D/2D modeling, wiring, and hook-up activities. - Familiarity with ASME, API, ISA, TEC, and other industry-related standards. Additional Details: Tecnicas Reunidas group (TR) specializes in the design, construction, and management of Industrial plants worldwide, with a focus on projects related to hydrogen, biomass, biofuels, decarbonization, artificial intelligence, and digitization. The company's culture revolves around sustainable growth, decarbonization, and energy transition. Note: Benefits & Perks like Exposure to International Assignments & clients, Flexible work time, Full-time role, and Attractive salary and packages are also offered.,

As an Instrumentation Technician at Piramal Pharma Solutions (PPS), your role involves assisting in routine maintenance, calibration, and troubleshooting of instruments such as pressure transmitters, flow meters, temperature sensors, level transmitters, and control valves. You will support the team in the installation and commissioning of new instrumentation and control systems. Additionally, you will learn to interpret P&IDs (Piping & Instrumentation Diagrams) and loop diagrams. It is crucial to maintain documentation related to instrumentation activities, calibration reports, and maintenance logs as per cGMP standards. Adhering to safety protocols and quality compliance in all maintenance activities is paramount in this role. You will also gain exposure to automation systems such as PLCs, SCADA, and DCS. Participation in continuous improvement and other initiatives in the maintenance department is expected from you. In the three decades of its existence, Piramal Group has pursued a twin strategy of both organic and inorganic growth. Driven by its core values, Piramal Group steadfastly pursues inclusive growth, while adhering to ethical and values-driven practices. Equal employment opportunity is a fundamental principle at Piramal Group. Employment decisions are based on merit, considering qualifications, skills, performance, and achievements. The organization endeavors to ensure that all applicants and employees receive equal opportunity in personnel matters, including recruitment, selection, training, placement, promotion, demotion, compensation and benefits, transfers, terminations, and working conditions, including reasonable accommodation for qualified individuals with disabilities as well as individuals with needs related to their religious observance or practice. Piramal Pharma Solutions (PPS) is a Contract Development and Manufacturing Organization (CDMO) offering end-to-end development and manufacturing solutions across the drug life cycle. The organization serves its customers through a globally integrated network of facilities in North America, Europe, and Asia. This enables PPS to offer a comprehensive range of services including: - Drug discovery solutions - Process & pharmaceutical development services - Clinical trial supplies - Commercial supply of APIs and finished dosage forms - Specialized services such as the development and manufacture of highly potent APIs, antibody-drug conjugations, sterile fill/finish, peptide products & services, and potent solid oral drug products - Development and manufacturing services for biologics including vaccines, gene therapies, and monoclonal antibodies, facilitated through Piramal Pharma Limited's investment in Yapan Bio Private Limited The track record of PPS as a trusted service provider with experience across varied technologies makes it a partner of choice for innovators and generic companies worldwide.,

As an Instrumentation Engineer, your role involves reading and interpreting Piping and Instrumentation Diagrams (P&ID) for system design, troubleshooting, and project execution. You will design, maintain, and improve instrumentation systems used in industrial processes to ensure smooth and efficient operation of equipment. Your key responsibilities include: - Reading, interpreting, and analyzing Piping & Instrumentation Diagrams (P&ID) for system design and troubleshooting. - Developing and implementing instrumentation specifications, including sensors, controllers, transmitters, and control valves. - Collaborating with design and project engineering teams to ensure alignment with project requirements and safety standards. - Conducting field inspections and technical evaluations for correct installation and operation. - Assisting in the commissioning and start-up of instrumentation systems in new facilities. - Ensuring compliance with safety and regulatory standards. - Troubleshooting and resolving instrumentation issues during maintenance or projects. - Participating in safety assessments and collaborating with other engineering disciplines to optimize system performance. - Maintaining accurate documentation and providing training and support to operators and maintenance teams. Qualifications required for this position include: - Bachelor's degree in Instrumentation Engineering, Electrical Engineering, or a related field. - Minimum 2 years of experience in instrumentation engineering, with a focus on reading and interpreting P&IDs. - Strong knowledge of process control systems, instrumentation devices, and industrial automation. - Familiarity with CCOE requirements, industry standards (ISA, API, IEC), and software tools for instrumentation design. - Excellent problem-solving skills, attention to detail, communication, and team collaboration skills. - Knowledge of Hazardous Area Classification and related safety regulations is a plus. Preferred skills for this role include hands-on experience in DCS, PLC, and SCADA systems, proficiency in instrumentation calibration and loop checking, and experience in the oil & gas, chemical, or power plant industry. The company offers a competitive salary based on experience, along with benefits such as health insurance, retirement plans, and paid leave. Additionally, the job is full-time with benefits including commuter assistance, provided food, health insurance, leave encashment, life insurance, and provident fund. The work location is in person.,