7 Valve Repair Jobs nearby Vapi

Job Profile (Mechanical Engineer):   Around 5-10 years of Experience in Design & Engineering for Water, Waste water, Pharma & process technology for Mechanical Design of the projects.   Responsibilities Technical Selection & Detailed Design Engineering of EPC Projects. Preparation of Engineering Documents, Review of Drawings, Data Sheets, PFD, P&ID, Mass Balance, Process Calculations, Piping & Valve selection etc. Preparation of Material Requisition, Technical Bid Evaluation, checking and validation of engineering documents. Participate Design Input Review, conduct meeting with client, Value Engineering Prospects for equipments/packages of Projects. Customer & Vendor Coordination for technical discussion and quarry resolution, Vendor Document Review. Preparation of RFQ, Vendor coordination, Vendor Technical Query (TQ) resolution during pre-bid & post bid, Technical Bid Evaluation, rating & recommendation   Qualifications: -B.E / Diploma in Mechanical stream. -Experience in Design Software like AutoCAD & ROSA. -Excellent problem solving and time management skills.   Experience & Strength Water Treatment company backgrounds are more preferable Familiar with Microsoft Office Package Ability to make tailor made software on excel basis

As an Instrumentation Technician at our company in Gandhidham, Gujarat, your role will involve installing, calibrating, and maintaining instrumentation and control devices. You will be responsible for troubleshooting and repairing instrumentation systems, including sensors, transmitters, and control valves. Additionally, you will perform routine inspections and preventive maintenance on instruments. Furthermore, you will assist in the commissioning and testing of new instrumentation equipment, ensuring compliance with safety standards and operational procedures. It will be essential for you to maintain accurate records of maintenance activities and instrument status, while collaborating with maintenance and production teams for smooth operations. Key Responsibilities: - Install, calibrate, and maintain instrumentation and control devices - Troubleshoot and repair instrumentation systems including sensors, transmitters, and control valves - Perform routine inspections and preventive maintenance on instruments - Assist in commissioning and testing of new instrumentation equipment - Ensure compliance with safety standards and operational procedures - Maintain accurate records of maintenance activities and instrument status - Collaborate with maintenance and production teams for smooth operations Qualifications Required: - Diploma or ITI in Instrumentation or Electrical Engineering As an Instrumentation Technician, you must have hands-on experience with process control instruments and PLCs. You should possess a good understanding of instrumentation circuits and calibration techniques, along with the ability to read and interpret technical drawings and manuals. Strong troubleshooting and problem-solving skills are essential, along with awareness of safety and quality standards. For any further details, you can contact 9904582301 or 6358812301. To apply for this position, please email your resume to resume@theactivegroup.in. This is a full-time job with a rotational shift schedule, requiring in-person work at the designated location.,

As an Instrumentation Reliability Engineer in the oil and gas, manufacturing industry, Polyester, Polymer, Petrochemical, Refinery industry, your role involves maintaining and maximizing the reliability & availability of DCS, PLC, Analysers, and various other field instruments at the site. Your key responsibilities will include: - Improving reliability through Continuous Improvement techniques, up-gradation, projects, and implementation of advanced diagnostic and online condition monitoring techniques. - Standardizing best practices specific to site instrumentation equipment and implementing Group guidelines and LFIs for reliability improvement. - Providing inputs to standardize best practices specific to site instrumentation equipment and incorporating significant Reliability shared lessons learned into Engineering Technical Procedures. - Troubleshooting and supporting major & critical failures/issues occurring at the site. - Participating in reliability & Integrity studies and analyzing obsolescence to implement asset renewal plans. - Reviewing and maintaining interlocks and Shutdown systems and maintaining the Instrumentation testing laboratory. - Participating in turnaround & shutdown activities and identifying/implementing energy conservation initiatives. - Supporting Technical Due Diligence for major activities, minor projects, plant expansions, and modifications. - Following and enforcing applicable HSEF procedures/practices and RIL Group Safety Standards. - Participating in and reviewing RCAs, liquidating RCA recommendations, and supporting REAM functions with reliability standards & defect elimination efforts. - Conducting periodic audits to identify gaps and ensure instrumentation system operation and maintenance adherence to Group Standards and Best Maintenance Practices. - Managing Repair & Refurbishment activities and interacting with various support services and vendor/equipment manufacturers for the Instrumentation discipline. - Managing learning & development of self & subordinates and ensuring HSEF compliance. - Supporting Knowledge management and Documentation management and providing inputs for plant maintenance cost budgeting and resource optimization. In addition to the above, you should have a BE/ME/BTech/MTech in Instrumentation/Electronics Engineering and at least 6 years of experience as an Instrumentation Reliability Engineer. You should possess skills in deploying best maintenance practices, energy conservation measures, project management, strong troubleshooting capabilities, knowledge of Reliability Centered Maintenance, FMEA reliability tools, Instrumentation operation and maintenance, decision-making ability, analytical thinking, managing ambiguity, knowledge of SAP PM/MM modules, good communication skills, familiarity with relevant codes and standards, and teaming, leading, and developing people. This is a full-time, permanent position with a rotational shift schedule, and the work location is in person. The expected start date is 03/06/2025.,

As a Line Manager for Powertrain Transaxle Testing & Engine Assy Maintenance at Tata Motors, your role will involve the following key responsibilities: - Knowledge of S7-300, S7-200 HMI Siemens HMI, PLC programming modification, fault finding & diagnosis - Capacity improvements through debottlenecking and improvements - Maintenance of conveyors - Knowledge of SAP system data entering - Revenue cost reduction initiatives for implementation and practice improvement idea generation and implementation - Interaction with all support functions and concern resolution with the help of CFT - Generate safety working culture - Develop improvement culture - Knowledge of TPM and manpower handling, power cost reduction & productivity improvement projects - Daily breakdown analysis with ICA and PCA - Work allocation to team members as per their skill - SAP knowledge for material procurement, spare management in SAP - MTTR and MTBF analysis and improvement actions - Daily maintenance planning for line operation, PM, and repair activities - Performing inspections of equipment to ensure that it is in good working order and that safety precautions are being followed - Conducting research on new technology or techniques that may be applied in the workplace - Maintaining and repairing machinery, equipment, and tools used in manufacturing processes - Performing preventive maintenance and repair work on machinery, equipment, tools, and other items used in manufacturing processes - Installing and repairing equipment such as motors, pumps, valves, and cylinders - Helping to develop a maintenance plan for equipment to ensure that it stays in good working condition over time - Evaluating possible causes of machinery failures and taking corrective action where needed - Scheduling maintenance activities to ensure that machinery is in good working order at all times In addition to the responsibilities outlined above, you will also be responsible for developing a safety working culture, improvement culture, and ensuring the implementation of revenue cost reduction initiatives.,

As a Maintenance Technician at Marriott International, your role involves responding and attending to guest repair requests and communicating with guests/customers to resolve maintenance issues. You will be responsible for performing preventive maintenance on tools, kitchen equipment, and mechanical room equipment, including cleaning and lubrication. It is essential to visually inspect tools, equipment, or machines, carry equipment, and identify, locate, and operate all shut-off valves for equipment and utility shut-offs for buildings. Key Responsibilities: - Maintain maintenance inventory and requisition parts and supplies as needed - Communicate each day's activities and problems to other shifts using approved communication programs and standards - Display basic knowledge or ability to acquire knowledge in various categories such as air conditioning, refrigeration, electrical, mechanical, plumbing, carpentry, and more - Perform various tasks including surface preparation, painting, minor repairs, light bulb replacement, and thorough cleanup - Test, troubleshoot, and perform basic repairs on equipment, plumbing, electrical components, and guestroom items - Program TV's, perform general housekeeping, and handle engineering-related inventory duties - Utilize the Lockout/Tagout system before performing any maintenance work - Perform repairs on interior and exterior landscaping, as well as external landscaping sprinklers - Display basic computer skills for scheduling and temperature changes Qualifications Required: - High school diploma or G.E.D equivalent - Some experience in general maintenance, exterior and interior surface preparation, and painting - Experience in hotel engineering or maintenance is a plus - Driver's License required At Marriott International, we are committed to providing equal opportunities and valuing the unique backgrounds of our associates. We foster an inclusive environment where diversity is celebrated, and non-discrimination is upheld on all protected bases. Join us in creating a workplace where culture, talent, and experiences are embraced and respected.,

Position Summary: You will be responsible for ensuring that residents have safe and clean water in accordance with federal, territorial, and municipal legislation, policies, and standards. Your main tasks will include monitoring and maintaining the Effluent Treatment Plant as per Pollution Control Board guidelines, as well as performing skilled and semi-skilled technical and maintenance work in the operation, maintenance, and repair of wastewater treatment facilities and systems. Responsibilities and Accountabilities: - Manage the Key Performance Areas (KPAs) of subordinates to ensure their performance meets agreed-upon KPAs and maintain ETP operation costs. - Fully implement training and development plans for all subordinates and coordinate with shop floor staff to achieve desired end quality. - Manage the ETP Plant to meet GPCB specifications and standards for effluent water quality. - Support the ETP Chemist in ensuring effluent water quality complies with relevant GPCB and water reclamation plant requirements. - Plan, organize, and manage overall activities of ETP and Filter press operation, including preparing shift schedules and updating ETP manuals. - Develop operators in the ETP and Filter press area to meet McCain's standards. Plant and Mechanical Operations: - Monitor equipment performance, gauges, and charts in the treatment plant and pump stations. - Record statistical data on plant operations and maintain, operate, repair, and replace equipment as necessary. - Operate, maintain, and repair malfunctions at the wastewater treatment plant, including gauges, pumps, filters, and other controls. - Maintain and repair instrumentation and control equipment, clean wet wells, and operate pumps and valves to control treatment processes. Neatness of Workplace: - Ensure cleanliness of walls, walkways, floors, and equipment in the ETP area. - Dispose of waste in correct containers and maintain a clean workplace environment. Maintenance & General Duties: - Report equipment defects to the Supervisor, make adjustments to optimize efficiency, and replace consumable parts as required. - Perform other reasonable work-related tasks as instructed by the QC Manager and ensure plant operations meet standards. Safety: - Ensure all equipment/motor covers are securely fitted, no loose wires are exposed, and floors are kept dry to prevent slips. Other Duties: - Calibrate instruments, add new procedures in QA, attend training as necessary, and perform other assigned duties. Requirements: Academic: - Must have a minimum of ITI or Degree in science or relevant field. Related Work Experience: - Minimum 4-5 years of experience in an ETP Plant. Competencies: Critical TECHNICAL Competencies: - Effective report writing skills, analytical abilities, awareness of ISO and GMP practices, and proficiency in MS Office. - Good leadership capabilities, ability to run ETP plant machines, knowledge of general boiler operation, plumbing, electrical work, and pump styles. Critical CORE Competencies: - Analytical and decision-making skills, communication, teamwork, ability to work weekends/holidays, produce quality work, and utilize time productively. Additional Information: You will have working relationships with internal contacts like Manager QA/ETP Executive, Plant Manager, Maintenance Manager/Executive/Area Leader, and external contacts with Govt. Authority and External Auditor. Travel requirements may vary based on job responsibilities.,

As an Engineer Workshop - Mechanical at the company located in Jamnagar, your primary responsibility is to execute workshop services related to machining, valve/PSV repairing & calibration, onsite support service, coordination of machining activity through outside vendors, and mechanical equipment overhauling. Your role is crucial in ensuring seamless and smooth operations while adhering to statutory compliance and organization's policies. Key Responsibilities: - Execute workshop services as per job planning for machining, valve/PSV repairing & calibration - Provide onsite support service related to machining - Coordinate machining activity through outside vendors - Perform mechanical equipment overhauling activities - Ensure zero HSEF incidents in Workshop and areas under CES workshop ownership - Timely completion of machining, overhauling (gear box & blowers)/repair work as per plant requirements (Routine & Shutdown) - Maintain availability of Heavy Equipment & heavy equipment allotment as per plan Qualifications Required: - Bachelor's degree in Engineering/ Technology (Mechanical stream) - 1-3 years of experience in industrial/Mechanical workshop maintenance field, with ~2 years of on-the-job experience preferred - Knowledge of mechanical maintenance management, inspection management, machining/production technology, various codes, standards, AutoCAD & metrology, workshop maintenance methodology, material handling equipment, and Health and Safety standards In this role, you will collaborate with internal teams such as Human Resource, Administration, Workshop, Planning, Security, and external stakeholders like Vendors, Equipment Manufacturers, and Contractors. Your knowledge and competencies in mechanical maintenance management, inspection, machining technology, and Health and Safety standards will be crucial for your success in this position.,

Diagnostics and Inspection Examine vehicles to ascertain the nature and location of defects, either by running the engine, driving the vehicle, or performing detailed inspections. Use diagnostic tools and testing equipment (including computerized systems) to identify and troubleshoot mechanical and electrical faults. Repair, Overhaul, and Assembly Dismantle partially or completely defective units or parts, such as the engine, gear box, clutch, rear axle, front axle, steering assembly, or braking systems. Measure essential parts like cylinder bores, pistons, and crankpins using precision tools (e.g., micrometers, gauges). Repair or overhaul and assemble engine components (e.g., replacing defective parts, grinding valves, setting timing). Replace or repair defective parts of the gear box, rear axle, steering mechanism, etc., ensuring correct alignment, clearance, and specified operations. Work on vehicle electrical systems, including batteries, starter motors, alternators, lighting, and wiring. Relining and rebuilding brakes, setting wheel alignment, and adjusting steering, clutch, and hand brakes.

Job Purpose The Procurement Engineer is responsible for sourcing, evaluating, negotiating, and procuring materials, equipment, spares, and subcontracted services required for ship repair and marine engineering projects. The role ensures the timely availability of all resources at optimal cost, supporting operational teams in meeting project deadlines, dry-docking schedules, and client requirements. Key Responsibilities 1. Procurement & Sourcing Operations Review material requisitions (MRs), repair lists, specifications, and technical requirements from engineering and operations teams. Source marine spares, consumables, class-approved materials, steel, piping, valves, machinery parts, electrical items, paints/coatings, and subcontract services. Prepare RFQs, evaluate bids, and recommend technically and commercially compliant suppliers. Ensure adherence to marine/class standards (DNV, ABS, BV, Lloyds, etc.) for all procured items. 2. Vendor Management Identify, qualify, and maintain a strong supplier network for local and international sourcing. Develop relationships with OEMs, ship chandlers, machine shops, fabricators, subcontractors, and logistics providers. Maintain vendor performance evaluations based on delivery reliability, pricing, quality, and compliance. Negotiate long-term agreements and price contracts to reduce procurement costs. 3. Project Coordination & Support Coordinate closely with ship repair coordinators, production supervisors, planners, and project engineers. Track project schedules to ensure timely delivery of materials during dry-docking and afloat repair periods. Expedite urgent and emergency supply requirements during breakdown or port-call repairs. Ensure accurate communication on delivery status, lead times, variations, and delays. 4. Cost Control & Commercial Responsibilities Conduct cost comparison, price benchmarking, and value engineering to optimize procurement spending. Support creation of project budgets and provide cost inputs for estimation and tendering teams. Maintain compliance with company commercial policies and cost-control guidelines. Support timely processing of purchase orders, invoices, and payment follow-ups. 5. Quality, Compliance & Documentation Ensure documentation compliance (certificates, test reports, traceability documents, MSDS, class approvals). Verify supplier conformity to quality requirements and manage necessary inspections. Maintain records of RFQs, offers, purchase orders, delivery notes, inspection reports, and contracts. Follow HSE guidelines related to hazardous materials, chemicals, and shipping logistics. 6. Logistics & Delivery Coordination Arrange transportation, customs clearance, port passes, and delivery to vessel or shipyard. Coordinate with warehouse teams for receiving, inspection, and inventory control. Track international shipments, maintain required customs documentation, and manage freight forwarding. Key Skills & Competencies Strong understanding of ship repair materials, marine equipment, machinery systems, and class requirements. Negotiation, commercial analysis, and supplier management skills. Ability to read technical drawings, specifications, and equipment datasheets. Excellent communication and coordination abilities. Strong time management skills, particularly during fast-track or emergency repairs. Working knowledge of ERP systems, procurement software, and MS Office. Qualifications & Experience Bachelors degree in Mechanical Engineering, Marine Engineering, or a related field. 3-8 years of experience in procurement within ship repair, marine engineering, or industrial maintenance. Experience sourcing marine equipment, spares, steel, piping, and technical services. Knowledge of international logistics, INCOTERMS, and GCC import regulations. Oman/GCC shipyard or port experience is preferred.

As a Valve Repair Technician, your role involves performing repair and testing of various valves such as Gate, Globe, Check, Ball, Plug, Triple offset Butterfly, safety relief valves, Choke, control valves, both inhouse and at client locations. You will be responsible for disassembly, cleaning, inspection, measuring, reassembly, and testing of valves. Your familiarity with industry standards and regulations related to valve maintenance and repair will be crucial for this role. Key Responsibilities: - Perform valve assembly and testing, which includes hydrotesting, pneumatic seat leak testing, gas leak testing, and all other applicable pressure testing for a variety of valves. - Ability to set up electric actuator, pneumatic actuator, and controls. Knowledge in Valve actuator Automation, understanding schematic, and control panel tubing. - Utilize hand tools, power tools, and specialized equipment for valve repair efficiently. - Read and interpret technical drawings, schematics, and manuals, ensuring compliance with company quality control procedures. - Complete all documentation associated with testing and repairs thoroughly. - Travel to job sites and adhere to all site safety and performance requirements. - Transport valves to and from sites when required. Qualifications Required: - Total work experience of 3 years is preferred. - Ability to work in person at the designated work location. Join us as a Valve Repair Technician and contribute to the efficient repair and maintenance of various valves. As a Valve Repair Technician, your role involves performing repair and testing of various valves such as Gate, Globe, Check, Ball, Plug, Triple offset Butterfly, safety relief valves, Choke, control valves, both inhouse and at client locations. You will be responsible for disassembly, cleaning, inspection, measuring, reassembly, and testing of valves. Your familiarity with industry standards and regulations related to valve maintenance and repair will be crucial for this role. Key Responsibilities: - Perform valve assembly and testing, which includes hydrotesting, pneumatic seat leak testing, gas leak testing, and all other applicable pressure testing for a variety of valves. - Ability to set up electric actuator, pneumatic actuator, and controls. Knowledge in Valve actuator Automation, understanding schematic, and control panel tubing. - Utilize hand tools, power tools, and specialized equipment for valve repair efficiently. - Read and interpret technical drawings, schematics, and manuals, ensuring compliance with company quality control procedures. - Complete all documentation associated with testing and repairs thoroughly. - Travel to job sites and adhere to all site safety and performance requirements. - Transport valves to and from sites when required. Qualifications Required: - Total work experience of 3 years is preferred. - Ability to work in person at the designated work location. Join us as a Valve Repair Technician and contribute to the efficient repair and maintenance of various valves.

Role Overview: You will be responsible for working on projects and operations to implement standard valve specifications and datasheets, providing technical input on behalf of the Valve Global Product Team. Your role will involve supporting projects in completing call offs and ensuring the correct standardization activities are carried out for valves. Additionally, you will contribute to the improvement and development of the valve procurement strategy and associated technical and quality requirements. Key Responsibilities: - Provide technical input and evaluation of valve packages and other piping materials to support Projects and Operations. - Review vendor documents. - Offer engineering support to Projects throughout the complete life cycle. - Assist in GIS interpretation for valve design and procurement. - Provide advice on detailed design to ensure alignment with Project requirements and standardization agenda. - Ensure rigorous engineering processes are followed. - Proactively identify opportunities for Continuous Improvement and Discipline Excellence. - Participate in key Engineering Design Reviews, Project HSSE Reviews, and HAZID/HAZOP reviews. - Take part in valve incident investigations. - Demonstrate compliance with HSSE expectations. - Actively engage in the Mechanical Network and Valve Community of Practice. - Support Front End Engineering (FEED) activities. - Supervise 3rd party activities and contractors on behalf of the team. Qualifications Required: - Degree in Mechanical Engineering or equivalent. - Chartered Engineer or Professional Engineer or equivalent certification. - 8 years of relevant experience in oil and gas/petrochemical/refining/chemical industry or equivalent. - Total experience of 8-12 years. - Strong technical understanding of engineering, maintenance, and operation of valves, piping, and static mechanical equipment in oil & gas processing facilities. - Knowledge of valves design, selection, testing, and operation. - Familiarity with governing codes, industry standards (e.g., API, ASME, ISO, ASTM), and local regulations relevant to mechanical engineering. - Proven track record in applying engineering standards and practices for mechanical equipment. - Experience working with OEMs and vendors on valves and piping systems. - Ability to work collaboratively as part of a remote team. - Proficient in risk management in projects and operating facilities. - Track record of driving engineering improvements across teams and functions. - Experience in piping designs, piping stress analysis, flanged joint designs, integrity assessment, repairs, and industry codes and standards (API, ASME, ISO). - Familiarity with brownfield modifications, front end engineering, scoping, and technical evaluation. Additional Company Details: Omit this section as there are no additional details mentioned in the provided job description.,

As a mechanical fitter at our company, your role will involve carrying out repairs and maintenance work on Ship/Marine equipment and afloat repairs in Mangalore Port. You will work closely with the Supervisor/Engineer to repair Ship equipment such as pumps, valves, motors, and more. Key Responsibilities: - Collaborate with the Supervisor/Engineer to conduct repairs on Ship equipment like pumps, valves, motors, etc. Qualifications Required: - ITI - Diploma in Mechanical/Electrical If you are interested in this opportunity, you can apply for the position by sending your resume to shashank@amarmarine.com.,

Role Overview: You will be joining Gayatri Power Private Limited as an Electrical & Mechanical Technician based in Alingapuram. Your primary responsibilities will include equipment maintenance, troubleshooting, preventive maintenance, and repair tasks for electrical and mechanical systems to enhance reliability and performance. Key Responsibilities: - Safety & Inspection: - Complete safety walkthrough and PPE check - Review previous shift logs and handover notes - Inspect emergency systems and communication equipment - Operational Monitoring: - Record hourly readings of critical parameters - Monitor turbine-generator performance and cooling systems - Check oil levels, water flow, and system pressures - Track grid parameters and energy generation data - Mechanical Maintenance: - Inspect rotating equipment and bearings - Check hydraulic systems and governors - Maintain cooling and lubrication systems - Service valves, gates, and auxiliary equipment - Electrical Maintenance: - Monitor generator and excitation systems - Check switchyard equipment and transformers - Maintain protection and control systems - Verify battery banks and DC systems - Preventive Maintenance: - Execute scheduled maintenance tasks - Perform routine cleaning and adjustments - Conduct basic calibration checks - Replace consumables and filters as needed - Documentation: - Complete log sheets and maintenance records - Report abnormalities and defects - Update equipment registers - Prepare shift handover reports - Emergency Preparedness: - Maintain readiness for unit trips and grid disturbances - Monitor weather and operational conditions - Coordinate with grid operators as required - Respond to alarms and protection system operations Qualifications: - Skills in Equipment Maintenance and Maintenance & Repair - Experience with Preventive Maintenance techniques - Proficiency in Troubleshooting issues and problems - Strong analytical and problem-solving skills - Technical certification or diploma in Electrical or Mechanical engineering - Ability to read and interpret technical manuals and blueprints - Time management and organizational skills - Ability to use Google Sheets/Excel, ChatGPT - Previous experience in a similar role is a plus,

Role Overview: As a Refrigeration Technician at our dairy processing facility in Dewas, Madhya Pradesh, you will be responsible for the installation, maintenance, and repair of refrigeration systems. Your role is crucial in ensuring that milk and dairy products are stored, processed, and distributed at optimal temperatures, meeting industry and safety standards. Key Responsibilities: - Install, inspect, maintain, and repair industrial refrigeration equipment, including both ammonia and Freon systems. - Troubleshoot issues in compressors, condensers, evaporators, valves, and related controls. - Perform routine preventive maintenance to uphold system reliability and efficiency. - Monitor temperatures, pressures, and system functions to guarantee proper operation of refrigeration equipment. - Maintain accurate refrigeration logs and documentation as per regulatory requirements like HACCP and GMP. - Ensure all work adheres to safety codes and industry regulations such as OSHA, EPA, and FDA. - Uphold knowledge and application of ammonia safety protocols and emergency response procedures. - Support maintenance of utility systems like chilled water, glycol systems, and air compressors. - Engage in energy-saving and efficiency-improvement initiatives. - Collaborate with production, quality, and sanitation teams to ensure continuous operation and provide insights on equipment upgrades and new installations. Qualification Required: - High School Diploma or equivalent is required; Technical certification in Refrigeration or HVAC is preferred. - Possess a minimum of 3 years of experience in industrial refrigeration, with a preference for experience in the dairy or food processing industry. - Highly desirable to have experience with ammonia systems (NH).,

Keshav Encon is hiring Instrument Engineer for L&T (PFCCU Unit) - LTEH on a 1-year TPC contract Position Details: - Role: Instrument Engineer - Client: L&T - PFCCU UNIT - Experience: 5 - 10 years - Location: Rajasthan - Barmer - Qualification: B.E./B.Tech degree in Instrumentation Engineering / Electronics & Communication Engineering - Key Skills: Instrumentation Commissioning, Loop Checking, Calibration, DCS/PLC Operations, Control Valves, P&ID Reading, Field Instrument Maintenance, Safety Compliance, Pre-commissioning & Startup Support. - Allowance: Bachelor shared accommodation, transportation, and food at platform provided by the end user - Role Type: TPC - 1 Year Contract (Payroll of Keshav Encon / extendable based on performance) To Apply: Kindly share your updated CV with either: - Jignasha Makwana - hrexec12@keshavencon.com | WhatsApp: +91 8780017417- Nirali Chauhan - hrexec2@keshavencon.com | WhatsApp: +91 9023185694- Minal Parmar - hrexec4@keshavencon.com | WhatsApp: +91 9016845384 About Keshav Encon: Keshav Encon began its journey in November 2010, established by industry enthusiast Engineer Mr. Vinod Viradiya, who brings over 16 years of first-hand field experience in Refineries and Petrochemicals.An ISO 9001:2015 certified company, Keshav Encon is headquartered in Vadodara, Gujarat - a hub for process and manufacturing industries.The company provides specialized solutions and services across industries such as Petrochemicals, Refineries, Oil & Gas, Power Generation, Metals, and Minerals.With a professional approach and a strong commitment to creating value for clients, Keshav Encon has earned the trust of 20+ leading industry partners across India since its inception.  

As a Maintenance Technician at our company, your role will involve calibrating, troubleshooting, repairing, and replacing process instruments as part of the plant's maintenance program. You will also be responsible for maintaining process instruments such as valves, vibration monitors, and other instruments. Key Responsibilities: - Calibrate, troubleshoot, repair, and replace process instruments - Maintain process instruments including valves, vibration monitors, and other instruments - Perform required environmental compliance testing and documentation - Reduce the cost of repairing equipment while maintaining or increasing the quality of repairs - Work closely with plant operations to evaluate routine and emergency instrument work - Wear proper safety equipment in appropriate areas - Be able to move in and around process equipment and confined spaces Qualifications Required: - Previous experience in calibrating, troubleshooting, and repairing process instruments - Knowledge of environmental compliance testing procedures - Ability to work effectively in collaboration with plant operations - Proficiency in wearing proper safety equipment in designated areas If you are looking for a Full-time job that requires you to be on-site, this position might be a great fit for you.,

As an Insulation Works Manager or Engineer with 15 to 20 years of field experience in supervising and handling insulation works of Piping Systems, Mechanical Equipment, Valves, and Package equipment, you will be expected to demonstrate the following key Proficiency: - Insulation Work Experience in Oil & Gas industries, Petrochemical Plants, and Power projects is mandatory. - Basic overview knowledge of P&ID, Line Schedule, Line list, and Isometrics to understand insulation requirements of the Piping Systems, Mechanical Equipment, Valves, and Package equipment. - Sound knowledge in all types of insulation including Hot Insulation (Heat Conservation), Cold Insulation (Cold Conservation), PUF Insulation, Personal Protection Insulation, Electric Tracing, etc. - Sound knowledge in Specialty Insulation such as Aerogel Blankets, Acoustic Insulation, Fireproofing Wraps, etc. - Familiarity with all types of insulation materials, their specifications, and required thickness. - Ample Knowledge in PUF Insulation for Support Blocks for Pipes. - Sound knowledge of all types of jacketing materials specifications, installation, including Inspection Plug Windows. - Experience in installation, inspection, modification, repair, and optimized usage of insulation materials, along with reconciliation. - Planning and Preparation of construction schedule for insulation works & monitoring. - Co-ordination with vendors, clients, and other interdisciplinary teams for the smooth execution of insulation works. - Knowledge in Scaffolding requirements for Insulation Works. - Proficiency in the preparation of Insulation installation procedures and obtaining approval from the client. - Understanding the inspection procedures & measurement methods for all types of insulation works. If there are any additional details about the company provided in the job description, please provide them separately. As an Insulation Works Manager or Engineer with 15 to 20 years of field experience in supervising and handling insulation works of Piping Systems, Mechanical Equipment, Valves, and Package equipment, you will be expected to demonstrate the following key Proficiency: - Insulation Work Experience in Oil & Gas industries, Petrochemical Plants, and Power projects is mandatory. - Basic overview knowledge of P&ID, Line Schedule, Line list, and Isometrics to understand insulation requirements of the Piping Systems, Mechanical Equipment, Valves, and Package equipment. - Sound knowledge in all types of insulation including Hot Insulation (Heat Conservation), Cold Insulation (Cold Conservation), PUF Insulation, Personal Protection Insulation, Electric Tracing, etc. - Sound knowledge in Specialty Insulation such as Aerogel Blankets, Acoustic Insulation, Fireproofing Wraps, etc. - Familiarity with all types of insulation materials, their specifications, and required thickness. - Ample Knowledge in PUF Insulation for Support Blocks for Pipes. - Sound knowledge of all types of jacketing materials specifications, installation, including Inspection Plug Windows. - Experience in installation, inspection, modification, repair, and optimized usage of insulation materials, along with reconciliation. - Planning and Preparation of construction schedule for insulation works & monitoring. - Co-ordination with vendors, clients, and other interdisciplinary teams for the smooth execution of insulation works. - Knowledge in Scaffolding requirements for Insulation Works. - Proficiency in the preparation of Insulation installation procedures and obtaining approval from the client. - Understanding the inspection procedures & measurement methods for all types of insulation works. If there are any additional details about the company provided in the job description, please provide them separately.

Role Overview: As a Thermographer for electrical distribution panels and motor control, your main responsibility will be to troubleshoot problems by analyzing power quality data. You will play a crucial role in ensuring the longer life of obsolete equipment and saving funds through detailed troubleshooting down to component levels. Your tasks will include maintenance, installation, repair, and troubleshooting of control centers, de-energized higher voltage equipment, and 480-volt motors. Additionally, you will be responsible for the repair and maintenance of engine generators and related control circuit equipment, as well as building circuits and similar equipment. Your role will also involve the maintenance of alarm and SCADA systems, electrical pneumatic and electronic controls, programmable controls, and other similar equipment. Furthermore, you will be expected to perform necessary carpentry, welding, valve repair, cement, and pipe fitting work. Your responsibilities will also include preparing reports, maintaining records, requisitioning supplies and parts, as well as inspecting and supervising work done by external vendors. Key Responsibilities: - Carry out thermography of electrical distribution panels and motor control - Troubleshoot problems by gathering and analyzing power quality data - Ensure longer life of obsolete equipment and save funds by carrying out detailed troubleshooting down to component levels - Perform maintenance, installation, repair, and troubleshooting of control centers, de-energized higher voltage equipment, and 480-volt motors - Repair and maintain engine generators and carry out work on related control circuit equipment - Carry out maintenance, repair, and installation of building circuits and similar equipment - Perform maintenance of alarm and SCADA systems, electrical pneumatic and electronic controls, programmable controls, and other similar equipment - Carry out necessary carpentry, welding, valve repair, cement, and pipe fitting work - Prepare reports, maintain records, and requisition supplies and parts - Inspect and supervise work done by external vendors Qualifications Required: - 1 year of total work experience preferred,

As an experienced professional with 3 to 5 years of experience in a steel plant and possessing JNTVTI Certification, you will be responsible for the following: - Operate and monitor pumps, valves, and pipelines to ensure pressure and flow are maintained. - Record readings of pressure, flow, and water levels accurately. - Start, stop, and adjust pumps based on operational requirements. - Inspect equipment regularly for leaks, noise, or any abnormal performance indicators. - Coordinate with the maintenance team for necessary repairs and servicing. - Promptly report any faults or irregularities to the supervisor. You will be entitled to Provident Fund benefits in this full-time, permanent position. The work location is in person. As an experienced professional with 3 to 5 years of experience in a steel plant and possessing JNTVTI Certification, you will be responsible for the following: - Operate and monitor pumps, valves, and pipelines to ensure pressure and flow are maintained. - Record readings of pressure, flow, and water levels accurately. - Start, stop, and adjust pumps based on operational requirements. - Inspect equipment regularly for leaks, noise, or any abnormal performance indicators. - Coordinate with the maintenance team for necessary repairs and servicing. - Promptly report any faults or irregularities to the supervisor. You will be entitled to Provident Fund benefits in this full-time, permanent position. The work location is in person.

Role Overview: You will be responsible for performing fitting, assembly, repair, and maintenance of machinery, as well as carrying out routine checks and preventive maintenance. Additionally, you will need to read technical drawings, use hand tools, maintain workshop equipment and mechanical parts, assist in machine alignment, installation, and fabrication, and ensure safe working practices at all times. Key Responsibilities: - Perform fitting, assembly, repair, and maintenance of machinery - Carry out routine checks and preventive maintenance - Read technical drawings and use hand tools - Maintain workshop equipment and mechanical parts - Assist in machine alignment, installation, and fabrication - Ensure safe working practices at all times Qualification Required: - Minimum 5 years of experience - Strong knowledge of industrial machinery fitting - Experience in field jobs preferred - Ability to work independently and troubleshoot effectively Company Details: Food provided, Health insurance, and Provident Fund are some of the benefits offered. The work location is in person.,