Interceptor – 160
₹10,000.00 – ₹12,500.00
Offers Ultra fast, jet-like performance in a 1645mm EPP Forward swept design that looks great in the air.
- Description
- Additional information
Description
Interceptor – 160
Offers Ultra fast, jet-like performance in a 1645mm EPP Forward swept design that looks great in the air.
SPECIFICATIONS
- WingSpan: 1645MM
- All-Up-Weight: 2500 gms
- CG Location: 20 MM back from mid panel & side panel join of wing.
RECOMMENDED EQUIPMENT
- 4-6 Channel Programmable Radio (Tx-Rx)
- 8000-12000 mah 4S Lipo
- 70-90 Amp Brushless ESC
- 2 Nos Servo (Metal gear recommended) Min Torque 4kg-cm
- Brushless Motor 900-1200KV Min 700Watts.
- 9-11 inch Propellor
- FPV Equipment ( Optional )
- Autopilot Equipment ( Optional )
BUILDING TOOLS
- Hot Glue Gun and Glue Sticks
- Cyanoacrylate Glue ( FeviKwik etc )
- Screwdrivers & Allen Key
- Paper Tape & Clear Packing Tape
- An Iron ( For Laminating )
- Soldering Iron and Solder Wire
- Ruler , Pen and a Flat Working Table
WHATS INCLUDED IN THE KIT
Epp Foam Part’s
-
- 2 Main EPP Wing Panels in Wing Beds
- 2 Shoulder EPP Wing Panels in Wing Beds
- 1 Center Fuselage EPP Wing Panel
Aeroply Part’s
- 3MM Laser Cut Aeroply Motor Mount
- 3MM Laser Cut Aeroply Battery Tray
- 2MM Laser Cut Aeroply Wing Strap retainers ( 4Pcs )
Corrugated plastic Part’s
- Corrugated plastic Winglets (2 pcs)
- Corrugated plastic Fuselage Cover
- Corrugated plastic Winglets
Lamination Roll
- 1.5ft x 15ft 3 Mil Lamination Film.
Battery Strap’s
- 220MM Non-Slip Battery Straps for wing (2Pcs)
- Non Slip Main Battery Strap 300mm
Alphaboard Part’s
- Root Jigs 4 Pcs Alphaboard
- Tip Jigs 4 Pcs Alphaboard
- 14 degree Elevon Throw Gauge
Elevon Part’s
- 36″ Balsa Elevon
- 2 sets 95 Threaded Steel Pushrods with 2 Steel Clevis ( and nuts )
- 2 Sets Nylon Control Horns with 2 screws each.
Carbon Fiber Part’s
- 12x10MM 1 Meter Length Roll Wrapped Carbon Fiber Spar
- 10x6MM 1 Meter Length Roll Wrapped Carbon Fiber Spar
- 10x8MM 1 Meter Length Roll Wrapped Carbon Fiber Spar
- 8x4MM 1 Meter Length Roll Wrapped Carbon Fiber Spar
- 2 Pcs 10x8MM 40Cm Length Roll Wrapped Carbon Fiber Spar
INTRO VIDEO
BUILD VIDEO
Packaging & Shipping
All our kits are securely packaged to ensure they reach you safely. Lasercut Sheets are first shrink wrapped, small parts are sealed in plastic bags, and then the entire kit is bubble wrapped, before being put in a custom made 5-ply corrugated Box.
Shrink Wrapped for Protection
Bubble Wrapped for Further Protection
Shipped in Strong Corrugated box
All Kits are shipped via India Post. This is because, Private couriers charge based on Volumetric Pricing, which is often very expensive. We stand by our kits and guarantee that in case of any major damages during transit, or any manufacturing defects , we shall gladly help arrange replacements.
IndiaPost Service is a Trackable service, and we provide tracking details, usually within 1 working day.
Image Gallery
Unbelieveble Value for Money. One of the cheapest ways to get in flying. Very stable, easy flying too. Extremely Happy. Thank you Vortex-RC
Additional information
| Weight | 6 kg |
|---|---|
| Build Option | Foam Cut Cores, Spars Installed |