Weather device

Overview

The weather device is basically a set of sensors that you can obtain from your weather station.

Example

async with XKNX() as xknx:
    weather = Weather(
        xknx,
        "Home",
        group_address_temperature="7/0/1",
        group_address_brightness_south="7/0/5",
        group_address_brightness_east="7/0/4",
        group_address_brightness_west="7/0/3",
        group_address_wind_speed="7/0/2",
        group_address_wind_bearing="7/0/6",
        group_address_day_night="7/0/7",
        group_address_rain_alarm="7/0/0",
    )
    xknx.devices.async_add(weather)

    await weather.sync(wait_for_result=True)
    print(weather)

Interface

• xknx is the XKNX object.
• name is the name of the object.
• group_address_temperature KNX address of current outside temperature. DPT 9.001
• group_address_brightness_south KNX address for the brightness to south DPT 9.004.
• group_address_brightness_west KNX address for the brightness to west DPT 9.004.
• group_address_brightness_east KNX address for the brightness to east DPT 9.004.
• group_address_wind_speed KNX address for current wind speed. DPT 9.005
• group_address_wind_bearing KNX address for current wind bearing. DPT 5.003
• group_address_rain_alarm KNX address for reading if rain alarm is on/off. DPT 1
• group_address_wind_alarm KNX address for reading if wind alarm is on/off. DPT 1
• group_address_frost_alarm KNX address for reading if frost alarm is on/off. DPT 1
• group_address_day_night KNX address for reading day/night state. By default the value True represents day and False represents night. DPT 1
• group_address_air_pressure KNX address reading current air pressure. DPT 9.006 or 14.058
• group_address_humidity KNX address for reading current humidity. DPT 9.007
• sync_state Periodically sync the state.
• device_updated_cb Callback for each update.
• invert_day_night Invert the day/night state.

async with XKNX() as xknx:
    weather = Weather(
        xknx,
        "Home",
        group_address_temperature="7/0/1",
        group_address_brightness_south="7/0/5",
        group_address_brightness_east="7/0/4",
        group_address_brightness_west="7/0/3",
        group_address_wind_speed="7/0/2",
        group_address_day_night="7/0/7",
        group_address_rain_alarm="7/0/0",
    )
    xknx.devices.async_add(weather)

    await weather.sync(wait_for_result=True)

    print(weather.humidity)  # get humidity
    print(
        weather.ha_current_state()
    )  # get the current state mapped as a WeatherCondition enum value. (for HA mainly)
    print(weather.wind_speed)  # get the current wind speed in m/s