OpenSCAD project to parametrically build a fireplace mantel and visualize it in a room. Useful when planning a fireplace install or make over.

PAP (Powerbank Air Powered)

OpenSCAD designs for a 3D-Printed LiquidPiston engine using pneumatic.

AeraTM is an Open Source PAPR device (positive pressure air respirator) which is appropriate for emergency situations where properly certified commercial PAPRs are in short supply. It aims to be modular, customizable and easy-to-source, using as many off-the-shelf vitamins as possible and distributed production on 3DPrinters, Laser-Cutters, Mill…

Physical buttons for media control on the Sony WH-1000XM2, WH-1000XM3, WH-1000XM4 and possibly WH-1000XM5 wireless headphones

a work in progress corne inspired dactyl manuform style keyboard with addressible rgb leds using the raspberry pi pico and an io expander and KMK firmware

Controlling Solid Stay Relays with Capacitive Sensor (CAP1188) Board

A diy proportional heating valve, trv valve

Custom lathe controller with VFD integration, tachometer display, and 3D printable case. Complete DIY build guide included.

A 3D printed 100mm sized micro quad.

使用 openscad 建模设计的 3D 文件，用于 3D 打印。

A collection of my openscad scripts.

plans for raised beds

Projects contaning custom parts for HPI Baja 1/5 scale RC cars

Hossein Naderi's Dactyl-Manuform handwired mechanical keyboard

Mobile Synth and Augmentation Workshop at CCRMA 2017

Pi Stack project: http://lellep.xyz/pi-stack/

A eurorack prototype breadboard made in kicad

DIY 5" 3D printed FPV mini quad