Skip to main content
Anoda

Vibe hardware.

Describe the board you want. Your AI builds it from blocks that already power on.

Join the waitlist
Claude Code, connected to Anoda
YouBuild a sensor logger with an IMU, a barometer, SD logging and USB-C. 36 by 36 mm.Your AI, building with Anoda
  • Added an MCU
  • Added a 6-axis IMU
  • Added a barometer
  • Added power, 5 V to 3.3 V
  • Added a microSD slot
  • Added a USB-C connector
  • Connected the IMU to the MCU over SPI
  • Connected the barometer over I2C
  • Connected the microSD slot over SPI
  • Connected USB power to the regulator
  • Connected the 3.3 V rail to the MCU
  • Checked every connection
Waiting for a description
U1ESP32-S3U2 IMUU3 BAROU4 POWERJ2 SDJ1 USB-CD1VerifiedVerifiedVerifiedVerifiedVerified

Your AI picks the blocks. We make sure they fit.

Anoda plugs into the AI you already use through MCP. It never draws traces from scratch, so far less can go wrong.

  1. 1

    Describe what you need

    In Claude Code, in plain words: sensors, interfaces, size, power.

  2. 2

    Your AI composes verified blocks

    It chooses blocks from the Anoda library and decides how they connect.

  3. 3

    Anoda checks every connection

    Voltage, current, bus addresses and required pins, then routing and manufacturing rules.

  4. 4

    Order the board

    Download fabrication files with a verification report, or order fabrication and assembly directly.

YouAdd a barometer to my board.
Your AIAdding a BMP581 barometer and connecting it to the 5 V rail.
AnodaThis barometer runs on 3.3 V. The rail supplies 5 V.
Your AIMoving it to the 3.3 V rail.
AnodaAll checks passed. 4-layer board routed, DRC and DFM clean.

Why the boards power on.

Blocks keep their layout

The inside of each block is placed exactly as it was when we tested it. Routing only happens between blocks, like hard macros on a chip.

imu.spiSPI, 3.3 V logic
baro.vddneeds 3.3 V
usb.vbussupplies 5 V

Type checks for hardware

Every port declares its voltage, current budget and protocol. Mismatches fail before anything is routed, and your AI gets an error it can fix.

gerber.zipbom.csvpick-and-place.csvverification-report.pdf

Files any factory accepts

Standard fabrication outputs with real, purchasable part numbers, plus a report of every check the board passed.

Design free. Pay when you build.

Exploring, composing and checking cost nothing. You pay when you take the files to a factory.

Free

$0
  • The full block library
  • Compose and check designs
  • One simple board export a month

Per board

$19–49per design
  • Gerber, BOM and pick-and-place files
  • Verification report
  • First power-on guarantee

Pro

$39a month
  • Monthly board exports
  • Free revisions
  • KiCad source files

First power-on guarantee

If a board built only from verified blocks does not power on because of its design, we fix it and pay for the next prototype run.

Build your first board.

Early access opens to the waitlist first, at a founding price.