44 products
44 products
Cortex Conform Matte Black BMX Scooter Helmet
Regular price $85.00
Tax included.
Shipping calculated at checkout.
A poor fitting helmet can compromise it’s effectiveness. By optimising the fit of your helmet you not only improve the comfort, but also the safety and function of the helmet.
That is why each CORTEX CONFORM helmet comes with 4 sets of pads. As the name suggests this helmet is designed to CONFORM perfectly to all head types by mixing and matching the different pad thickness until you find the PERFECT FIT THAT IS RIGHT FOR YOU!
FEATURES
4 Sets of CORTEX CONFORM anti-sweat and bacterial pads included: 3mm, 6mm, 9mm and 12mm thickness.
Super lightweight inmould shell construction.
A thicker polycarbonate outer shell improves impact protection and assists in dent prevention.
A deep fitting liner that sits low, providing lower coverage protection.
Simple quick release side strap adjustment secured by internal anchors.
HOW TO MEASURE
A good-fitting helmet should be snug but not annoyingly tight. It should sit level on your head (not tilted back) with the front edge one inch or less above your eyebrows so that your forehead is protected.
Push the helmet from side to side and back to front. If it shifts noticeable or you can feel pressure points on your head, you need to adjust the fit by mix and matching the different pad thickness’s until you find the best firm and conformed fit!
MACRO SIZE SELECTION
SMALL, MEDIUM OR LARGE
To find your head circumference wrap a flexible tape measure around the largest portion of your head – about one inch above your eyebrows, or wrap your phone cable around your head, then measure the length of cable with a ruler.
MICRO SIZE SELECTION
3MM, 6MM, 9MM OR 12MM PADS
Once you have determined your general macro size, make the micro adjustments to gain the perfect conformed fit by mix and matching the different pad thickness.
SIZING CHART
CHANGE YOUR PADS AS YOU GROW!
If you are still growing make sure you hang onto the extra pads so that you can change them out as you grow.
We recommend rechecking the conformity of the helmet every 6 months to ensure you maintain the optimum fit!
FULLY CERTIFIED
Cortex Conform Matte Teal BMX Scooter Helmet
Regular price $85.00
Tax included.
Shipping calculated at checkout.
CUSTOMISE, CONFORM, PROTECT
A poor fitting helmet can compromise it’s effectiveness. By optimising the fit of your helmet you not only improve the comfort, but also the safety and function of the helmet.
That is why each CORTEX CONFORM helmet comes with 4 sets of pads. As the name suggests this helmet is designed to CONFORM perfectly to all head types by mixing and matching the different pad thickness until you find the PERFECT FIT THAT IS RIGHT FOR YOU!
FEATURES
4 Sets of CORTEX CONFORM anti-sweat and bacterial pads included: 3mm, 6mm, 9mm and 12mm thickness.
Super lightweight inmould shell construction.
A thicker polycarbonate outer shell improves impact protection and assists in dent prevention.
A deep fitting liner that sits low, providing lower coverage protection.
Simple quick release side strap adjustment secured by internal anchors.
HOW TO MEASURE
A good-fitting helmet should be snug but not annoyingly tight. It should sit level on your head (not tilted back) with the front edge one inch or less above your eyebrows so that your forehead is protected.
Push the helmet from side to side and back to front. If it shifts noticeable or you can feel pressure points on your head, you need to adjust the fit by mix and matching the different pad thickness’s until you find the best firm and conformed fit!
MACRO SIZE SELECTION
SMALL, MEDIUM OR LARGE
To find your head circumference wrap a flexible tape measure around the largest portion of your head – about one inch above your eyebrows, or wrap your phone cable around your head, then measure the length of cable with a ruler.
MICRO SIZE SELECTION
3MM, 6MM, 9MM OR 12MM PADS
Once you have determined your general macro size, make the micro adjustments to gain the perfect conformed fit by mix and matching the different pad thickness.
SIZING CHART
CHANGE YOUR PADS AS YOU GROW!
If you are still growing make sure you hang onto the extra pads so that you can change them out as you grow.
We recommend rechecking the conformity of the helmet every 6 months to ensure you maintain the optimum fit!
FULLY CERTIFIED
SG1 ADULT ULTRA HELMET SHOTGUN MATT BLACK/COOL GREY
Regular price $159.95
Tax included.
Shipping calculated at checkout.
DESCRIPTION
SG1 ULTRA SHOTGUN MATT BLACK/COOL GREY
Suitable for BMX Racing
Please choose helmet sizing carefully - Returns/Refunds will not be accepted due to hygiene reasons - sizing chart in with the helmet images.
RXT SG1 ULTRA MX helmet has “Ultra Flow” ventilation and a light weight ABS Shell. With its removable/washable 3D liner, you can keep your helmet fresh and clean with a simple wash after your day at the track. It has a large eye port for a clear view and adjustable peak. Designed in Australia by Australian riders.
- Ultra Flow Ventilation System
- Large Eye port to accept large frame goggles
- Adjustable Peak
- Double D Rings
- Lightweight ABS Construction
- 3D Fully Washable / Removable Liner
- DRS) Dynamic Rotational System
- ECE 22.05 Standards