Screen print drying rack diy

News from the Pyramid Atlantic Letterpress Studio

DIY Screen Drying Rack for Screen Printing - Holds 20 x 24 inch Aluminum Screens

Well, my plan for today was to build myself a screen rack but the weather here in Las Vegas did not cooperate with me. Since I moved my screen printing shop to the garage I can't use my tools in there because of the dust. I was planning to build my rack in the back yard but it is VERY windy and cold. The cold is fine but I did not feel like having saw dust blown in my face and eyes. The weather is supposed to be bad for a few days so my screen rack will have to wait. At the moment, my drying…

paard studios on Instagram: “Lovely winter sunset on my drying rack, awwww. .. . . . . #printmaking #art #print #printmaker #printing #linocut #artist #etching…”

Finally getting to print some editions in my little print shop. Take the tour! This little building used to house garden tools and a lawnmower. Now it’s the perfect little print shop. I picke…

I was in Dire need of Screen Drying racks and thought I might buy the little roll around one with the tray on top due to my limited space. Man, I just...

Kjuly's Project

Drying Rack: If you need to paint in a confined space, it can be helpful to build a drying rack. The one pictured is built from 2 sheets of 1/2" birch plywood. It can hold up to 25 paintings at a maximum size of 18" x 24" per painting. As you can see from the se…

The finished drying rack in use. In this picture, the springs are three inches apart for smaller cards. I made a second unit where the springs are 5" apart for larger printed pieces. The spring was stretched about 1" so the rings would separate allowing for paper insertion. if I were remaking this, I'd stretch the springs a bit more.

Amazon.com: art drying rack for classroom