Upholstered box springs

i got tired of the sad looking dust ruffle on my bed so decided to dress it up a bit by "upholstering" my box spring. why the quotes around "upholster"? well, it has the look of being upholstered but really isn't. the project was pretty easy and only took about two hours or so. and, the end result looks pretty darn good--a much more finished look. see how i did it after the jump. 1. i dismantled my bed and got rid of the metal bed frame that had been hidden by the dust ruffle. 2. i picked…

Easy Way to Cover Box Springs - all you need is a staple gun and some fabric to cover that ugly box spring!

Our bed skirt was always super wrinkly and drug on the floor (aka hot mess). I made a diy nailhead trim headboard and had leftover fabric so figured why not cover the box spring with it. Here are some after pictures followed by instructions. "My cave is looking a bit different these days. I don't like it." Instructions: Measure your fabric. You'll need at least 12" for the width (make sure you can fold over 3" on each side) and then however long your box spring is. Our bed is a king which is…

DIY- upholstering your boxspring | Strangeness and Charm

the copper coconut: Easy Upholstered Box Spring

Your boxspring doesn't have to be ugly...

Hey folks, it's Brady here today on the blog. Don't worry, Em is still in charge. She is busy moving into her house while I bring you a fun DIY for your

I love the look of a full upholstered bed – the warmth, softness, and (you guessed it) coziness is everything I want for our primary bedroom. But do you want to know what I don’t like about u…

The bed in the guest room has rails which get in the way of a typical bed skirt. The bed is also higher than most, so a bed skirt doesn't cover all the things l…

Bedframe update: Covered box springs with bedding coordinate fabric using glue gun; built 3-sided wooden enclosure for metal frame foot including notch @ top to allow protrusion of metal; painted foot cover to match headboard; slipped into place. Voila!

Frames are craftsman-built from oak veneer and solid oak wood with a hand-applied finish and accented with upholstered panels. Bed frames accommodate for variances in mattress sizes and allow bedding to be tucked in. Darien beds do not require box springs.

Upholstered box spring with legs directly attached. I really wanted to remove the dry rot in my deck and replace it with new 2x4s today...

How to make a DIY upholstered Bed Frame. Step by step tutorial to make an upholstered bed frame that can be easily assembled and disassembled for moving. There is another tutorial for the DIY…

On a rainy Sunday morning I decided to get creative and make some finishing touches to my room. In March I moved to a new home and although ...

I am apologizing in advance. There are a few steps I failed to take pictures of. Apparently I got too busy and missed documenting a few st...

Make your own daybed out of a twin mattress set by adding wooden furniture legs to the bottom of the box spring. Paint legs, drill a hole into the center, insert a dowel screw, drill a hole in the box spring at each corner and screw in legs.

Our Bed. We FINALLY got our memory foam bed in… It took forever to get here, but all I can say is that patience is a virtue – and we definitely got to practice it while we eagerly await…