Gutters & Fascia Suppliers

At CMI we’re proud to stock high quality COLORBOND® metal guttering supplies and fascia for residential and commercial projects throughout Western Australia.

We’re one of Perth’s leading gutter manufacturing companies and COLORBOND® roof gutters and downpipes suppliers. Since 1985, we have been manufacturing each and every one of our high quality metal products in our own factory. Our in-house quality control systems deliver high quality metal guttering supplies, downpipes & fascia products to your exact specifications. 

You can rest assured that whatever your gutter or fascia you require, we have the materials to match and complement your existing materials, or to create a whole new look for your home or building. We’re expert rain gutter manufacturers, with a design team on-hand that specialise in all types of rainwater products who will ensure that the materials and coatings used in the manufacture of our guttering supplies are highly water and corrosion resistant.

Check out some of the metal guttering supplies we offer below:

Settlers Gutter Profile

CMI offers builders a solution for our Settlers Gutter by adding a compliant slot to the gutter. By adding the correctly dimensioned and positioned slots to the front face of our gutters, they achieve full compliance with the requirements set out in table 3.5.2.4 Acceptable Overflow Measures in the National Construction Code of Australia Volume 2. (subject to correct stormwater drainage system design and installation as per this code).

Our Settlers Gutter does not come slotted as a standard. Please ensure you request a slotted gutter at the time of ordering to get the fully compliant gutter.

Note: The requirements detailed the NCC 2016 Building Code of Australia Vol II are in full effect as of 1st May 2017. These requirements apply to all construction activities undertaken under Building License Applications made to permit authorities on or after May 1st 2017.

FEATURES:

  • Available in 0.40 – 0.55 Galvanised, COLORBOND® or ZINCALUME®  – rolled to length
  • We will roll 8m lengths but will need to be delivered to site
  • Available slotted
  • Mitre corners – internal and external
  • Stop ends – left and right
  • Timber or metal fix clips/straps

Streamline Gutter Profile

CMI offers builders a solution for our Streamline Gutter by adding a compliant slot to the gutter. By adding the correctly dimensioned and positioned slots to the front face of our gutters, they achieve full compliance with the requirements set out in table 3.5.2.4 Acceptable Overflow Measures in the National Construction Code of Australia Volume 2. (subject to correct stormwater drainage system design and installation as per this code).

Our Streamline Gutter does not come slotted as a standard. Please ensure you request a slotted gutter at the time of ordering to get the fully compliant gutter.

Note: The requirements detailed the NCC 2016 Building Code of Australia Vol II are in full effect as of 1st May 2017. These requirements apply to all construction activities undertaken under Building License Applications made to permit authorities on or after May 1st 2017.

FEATURES:

  • Available in 0.40 – 0.55 Galvanised, COLORBOND® or ZINCALUME®  – rolled to length
  • We will roll 8m lengths but will need to be delivered to site
  • Available slotted
  • Mitre corners – internal and external
  • Stop ends – left and right
  • Timber or metal fix clips/straps
  • External clips

Quarter Round Gutter Profile

The CMI Quarter Round Slotted Gutter system is the most stylish and robust quarter round available on the market. Designed and manufactured by our stainless steel guttering suppliers and specialist engineering team in Perth, our system ensures both good looks and BCA compliance.

FEATURES:

  • Available in 0.4mm and 0.55mm Galvanised, COLORBOND® or ZINCALUME® – Rolled to length
  • We will roll 8m lengths but will need to be delivered to site
  • Available slotted
  • Mitre corners – internal and external
  • Stop ends – left and right
  • Timber or metal fix clips/straps

Quad Gutter Profile

FEATURES:

  • Available in 0.55 Galvanised, COLORBOND® or ZINCALUME®
  • Mitre corners – internal and external
  • Stop ends – left and right
  • Timber or Metal fix clips/straps

Half Round Gutter Profile

FEATURES:

  • Available in 0.55 COLORBOND®, Galvanised or ZINCALUME®
  • Mitre corners – internal and external
  • Stop ends – left and right
  • Timber or Metal fix clips/straps

Patio Gutter Profile

Our patio gutters come in the full range of COLORBOND® colours to complement your patio roof.

FEATURES:

  • Available in 0.55 Galvanised, COLORBOND® or ZINCALUME®
  • Mitre corners – internal and external
  • Stop ends – left and right
  • Universal Gutter Clip

Comline Gutter Profile

The Comline Gutter Profile is the ideal gutter profile for commercial applications.

FEATURES:

  • Available in 0.55 Galvanised, ZINCALUME® or COLORBOND®
  • Mitre corners – internal and external
  • Stop ends – left and right
  • Universal Gutter Clip

CMI stocks the full range of accessories to suit gutters including:

  • Gutter Clips
  • Stop Ends
  • Mitres (pre-made corners)
  • Full COLORBOND® range

CMI are a leading fascia supplier and manufacturer in Perth. Our fascia is manufactured, shaped and cut into standard lengths using the very latest computer aided design and production techniques. Our facia not only fits perfectly, it also looks good and is produced to match our other roofing and rainwater components.

Whether you need a full new roof and rainwater system or you are just replacing your fascia, get in touch with us today. We can take care of everything that you need, including a comprehensive range of fixings and accessories.

Our fascia is available in COLORBOND® or ZINCALUME® and is rolled in any length up to 9.5m.

COLORBOND®Colours

Classic Finish

Matt Finish