Spool holder

No credit for design!All credit goes to the creator in the link below!https://www.printables.com/model/815732-build-plate-cleaner-microfiber-holder/fi

This set of holders for filament spools can be mounted to the popular IKEA SKADIS pegboard. In order to hold one spool there are always a left and a right part which belong together. By selecting the appropiate distance (=holes) between the parts it can be adapted to spools of different width: * 0: 4 - 5,7 cm * 1: 6 - 8 cm * 2: 8 - 9,8 cm Due to the alternating and pattern of the mounting holes you should pay attention to the required parts (also to the corners). The second image above…

Spool Holder: I thought it would be a nice idea to make a spool holder for my wife. She likes to sew and the spool holders in stores are expensive and hold very few spools. For only a couple dollars, you can build one of these for yourself or someone else who enj…

Large Thread Spool Holder on the Cheap: While shopping for thread my wife came across large cone shape spools of thread on sale for half off. The price was to good to pass up and it was very high quality thread as well. We asked one of the workers at the store if that particular spool wo…

Wall mount bracket for 200mm spools, but works good with smaller. Print that many as you need to strong hold. I used 3 ABS brackets printed with 3 0.4

Nearly all Original Prusa i3 3D printers have a spool of filament placed in the original holder on the frame. This solution is trouble-free, practical, functional and mobile. However, if you want to print from special materials, which are hygroscopic, you...

So here's yet another cut of transforming empty spool holders into parts drawers!! This version builds on the ideas others have already submitte

"Universal Spool Holder 18-56mm II, 606ZZ/608ZZ" by cntrlV seemed like a nice design, but my spool had 60mm hole. I made a simple parametri