Diy pool skimmer

I saw a remote controlled skimmer at the pool store and thought I could make something similar. I've made a few different versions. I thought I'd put the various parts here in case someone was looking to make something like it. When I added the "sweep" sections, which also hold the weir door, I just solvent welded them to net holder parts with MEK (they were printed in PETG). The frame of my skimmer is 1/2 inch PVC. The various 3D printed parts are designed to slide onto the PVC. I…

Skimmer Leaf Trap: The Problem: Leaves floating on the surface of the pool will clog your skimmers. The tannins in the leaves turn your skimmer basket and piping brown. And then, when you clean out the skimmer, stray leaves get sucked down the pipe. The Solution: I us…

I have an above ground pool and keeping it clean is often difficult because there are trees hanging over it as you can see by the shade in the picture. I have the pump nozzle set to make the water…

UnCommonSense: HOW TO MAKE A CHEAP HOMEMADE KOI POND SKIMMER

Cracks or breaks in a pool skimmer can waste a lot of water; fortunately, leaks in the skimmer are easy to fix with epoxy putty and silicone caulk.

Transform pool maintenance with Skim-eeze – an innovative, symmetrical device that effortlessly collects debris, giving you more time to swim. Get yours today!

DIY Pool Vacuum: I had a pole from a broken skimmer. Used a small pump from a smaller pool. Add pool hose to the end of the pump that sucks water in. I used tuck tape to tape the hose and the pump to the pole. Make sure there is a filter in the pump. Submerse the pu…

Our DIY Pool Heater is under $150.00 and it's a perfect addition to your above ground pool. It’s sure to keep you warm and swimming all summer long.