default search action
Computer-Aided Design, Volume 44
Volume 44, Number 1, January 2012
- Ameersing Luximon
, Vincent G. Duffy:
Preface. 1-2
- Guanglei Xiong, Gilwoo Choi, Charles A. Taylor:
Virtual interventions for image-based blood flow computation. 3-14 - Vinayak, Dibakar Sen:
A vision modeling framework for DHM using geometrically estimated FoV. 15-28 - Jared Gragg, Jingzhou (James) Yang
Hybrid method for driver accommodation using optimization-based digital human models. 29-39
- Yan Luximon
The 3D Chinese head and face modeling. 40-47 - Asanka S. Rodrigo, Ravindra S. Goonetilleke
Model based foot shape classification using 2D foot outlines. 48-55 - Seung-Yeob Baek
Parametric human body shape modeling framework for human-centered product design. 56-67
- Yuwei Meng, Charlie C. L. Wang
Flexible shape control for automatic resizing of apparel products. 68-76 - Ameersing Luximon
Sizing and grading for wearable products. 77-84
Volume 44, Number 2, February 2012
- Deok-Soo Kim, Jae-Kwan Kim, Youngsong Cho, Chong-Min Kim:
Querying simplexes in quasi-triangulation. 85-98 - Ravi Kumar Gupta
Automatic extraction of free-form surface features (FFSFs). 99-112 - Jarek Rossignac, Jay J. Kim:
HelSweeper: Screw-sweeps of canal surfaces. 113-122 - Sang-Uk Cheon, Byungchul Kim
A procedural method to exchange editable 3D data from a free-hand 2D sketch modeling system into 3D mechanical CAD systems. 123-131 - Ahmed-Jawad Qureshi, Jean-Yves Dantan
A statistical tolerance analysis approach for over-constrained mechanism based on optimization and Monte Carlo simulation. 132-142 - Jesús M. Carnicer, Jorge Delgado
Progressive iteration approximation and the geometric algorithm. 143-145 - Yong Chen, Ze-Lin Liu, You-Bai Xie:
A knowledge-based framework for creative conceptual design of multi-disciplinary systems. 146-153 - Jinggao Li, Byungchul Kim
Parametric exchange of round shapes between a mechanical CAD system and a ship CAD system. 154-161
Volume 44, Number 3, March 2012
- Tae-wan Kim, Richard Lee Storch, Hans Hopman, Stein Ove Erikstad:
Applications in ship and floating structure design and analysis. 163-165 - Rajiv Sharma
Challenges in computer applications for ship and floating structure design and analysis. 166-185 - Hao Cui, Osman Turan, Philip Sayer
Learning-based ship design optimization approach. 186-195 - H. Z. Yang, J. F. Chen, Ning Ma, D. Y. Wang:
Implementation of knowledge-based engineering methodology in ship structural design. 196-202 - Jean David Caprace
A real-time assessment of the ship design complexity. 203-208 - Timothy P. McDonald, David J. Andrews, Richard G. Pawling:
A demonstration of an advanced library based approach to the initial design exploration of different hullform configurations. 209-223 - Robert Ian Whitfield
A collaborative platform for integrating and optimising Computational Fluid Dynamics analysis requests. 224-240 - Ju-Hwan Cha
Development of a simulation framework and applications to new production processes in shipyards. 241-252 - Jang Hyun Lee, Seung-Hyun Kim, Kyung Ho Lee:
Integration of evolutional BOMs for design of ship outfitting equipment. 253-273
Volume 44, Number 4, April 2012
- Chun Yun Kee
B-spline scale-space of spline curves and surfaces. 275-288 - Patricia Chiang, Jianmin Zheng
Progressive surface reconstruction for heart mapping procedure. 289-299 - X. Y. Kou, Geoffrey T. Parks, Sooi-thor Tan:
Optimal design of functionally graded materials using a procedural model and particle swarm optimization. 300-310 - Ji-wung Choi, Renwick E. Curry, Gabriel Hugh Elkaim:
Minimizing the maximum curvature of quadratic Bézier curves with a tetragonal concave polygonal boundary constraint. 311-319 - Nana Wang, Chaoguang Men:
Reversible fragile watermarking for 2-D vector map authentication with localization. 320-330 - Herng Yi Cheng, Kang Hao Cheong
Designing crease patterns for polyhedra by composing right frusta. 331-342 - Ram Prasad Diwakaran, Michael D. Johnson
Analyzing the effect of alternative goals and model attributes on CAD model creation and alteration. 343-353
Volume 44, Number 5, May 2012
- Rafiq Ahmad
New computer vision based Snakes and Ladders algorithm for the safe trajectory of two axis CNC machines. 355-366 - B. Domínguez, Ángel Luis García-Fernández
Semiautomatic detection of floor topology from CAD architectural drawings. 367-378 - Robert J. Cripps, Glen Mullineux:
Constructing 3D motions from curvature and torsion profiles. 379-387 - Dan Wang
A virtual punching method for shape optimization of openings on curved panels using CAD-based Boolean operations. 388-399 - Jun Wang
Feature-sensitive tetrahedral mesh generation with guaranteed quality. 400-412 - Ata A. Eftekharian, Horea T. Ilies:
Medial zones: Formulation and applications. 413-423 - Chongyang Deng
Weighted progressive interpolation of Loop subdivision surfaces. 424-431 - Keyvan Rahmani
Ontology based interface design and control methodology for collaborative product development. 432-444 - Javier Sánchez-Reyes
Hermite approximation for free-form deformation of curves and surfaces. 445-456 - Sang-Hun Lee
Simultaneous and incremental feature-based multiresolution modeling with feature operations in part design. 457-483 - Orest Shardt
Surface parameterization of nonsimply connected planar Bézier regions. 484
Volume 44, Number 6, June 2012
- Gail M. Rodney
Publisher's note. 495 - Yuan Guo, Jie Hu, Ying-hong Peng:
A CBR system for injection mould design based on ontology: A case study. 496-508 - Massimiliano Annoni
A real-time configurable NURBS interpolator with bounded acceleration, jerk and chord error. 509-521 - Alan Sullivan, Hüseyin Erdim, Ronald N. Perry, Sarah F. Frisken:
High accuracy NC milling simulation using composite adaptively sampled distance fields. 522-536 - Manish Goyal, Sundar Murugappan, Cecil Piya, William Benjamin, Yi Fang, Min Liu, Karthik Ramani:
Towards locally and globally shape-aware reverse 3D modeling. 537-553 - Xiang Chen, Shuming Gao, Song Guo, Jing Bai:
A flexible assembly retrieval approach for model reuse. 554-574 - Raphael Barbau, Sylvère Krima, Rachuri Sudarsan
OntoSTEP: Enriching product model data using ontologies. 575-590 - Rushan Ziatdinov
Fitting G2 multispiral transition curve joining two straight lines. 591-596
Volume 44, Number 7, July 2012
- Jun Wang
A cascaded approach for feature-preserving surface mesh denoising. 597-610 - Aristomenis Antoniadis:
Gear skiving - CAD simulation approach. 611-616 - Pei Zhou, Wen-Han Qian:
Adding draft angle to B-spline and NURBS surfaces. 617-625 - Byoung-Keon Park, Jay J. Kim:
A sharable format for multidisciplinary finite element analysis data. 626-636 - Ergin Bayram
Parametric representation of a surface pencil with a common asymptotic curve. 637-643 - Mehmet Ersin Yümer, Levent Burak Kara
Surface creation on unstructured point sets using neural networks. 644-656 - Tomas Trescak
A shape grammar interpreter for rectilinear forms. 657-670 - Min-jae Oh
Constructing G1 Bézier surfaces over a boundary curve network with T-junctions. 671-686 - A. Rodríguez, Leonardo Fernández-Jambrina
Programmed design of ship forms. 687-696 - Yuki Kineri, Mingsi Wang, Hongwei Lin, Takashi Maekawa
B-spline surface fitting by iterative geometric interpolation/approximation algorithms. 697-708 - Marta R. Hidalgo
Computing parameter ranges in constructive geometric constraint solving: Implementation and correctness proof. 709-720
Volume 44, Number 8, August 2012
- Yuwei Meng, P. Y. Mok, Xiaogang Jin:
Computer aided clothing pattern design with 3D editing and pattern alteration. 721-734 - Jaewook Lee, Yongwook Jeong
User-centric knowledge representations based on ontology for AEC design collaboration. 735-748 - Renjiang Zhang:
Curve and surface reconstruction based on a set of improved interpolatory basis functions. 749-756 - Hao-Ming Hsiao, Yi-Hsiang Chiu, Kuang-Huei Lee, Chien-Han Lin:
Computational modeling of effects of intravascular stent design on key mechanical and hemodynamic behavior. 757-765 - André Kubagawa Sato, Thiago de Castro Martins, Marcos de Sales Guerra Tsuzuki:
An algorithm for the strip packing problem using collision free region and exact fitting placement. 766-777 - Yaping Zhao
Computerized simulation of tooth contact and error sensitivity investigation for ease-off hourglass worm drives. 778-790 - Wilhelm Frederik van der Vegte
Theoretical underpinning and prototype implementation of scenario bundle-based logical control for simulation of human-artifact interaction. 791-809
Volume 44, Number 9, September 2012
- C. G. Li, C. L. Li, Yusheng Liu, Yuanhao Huang:
A new C-space method to automate the layout design of injection mould cooling system. 811-823 - Yi-Jun Yang, Wei Zeng, Chenglei Yang, Xiangxu Meng, Jun-Hai Yong, Bailin Deng
G1 continuous approximate curves on NURBS surfaces. 824-834 - Deok-Soo Kim, Youngsong Cho, Jae-Kwan Kim, Joonghyun Ryu
QTF: Quasi-triangulation file format. 835-845 - Michal Bizzarri
A symbolic-numerical method for computing approximate parameterizations of canal surfaces. 846-857 - Jonathan E. Makem, Hengan Ou, Cecil G. Armstrong
A virtual inspection framework for precision manufacturing of aerofoil components. 858-874
Volume 44, Number 10, October 2012
- Yong Zeng
Fundamentals of next generation CAD/E systems. 875-878 - Ashok K. Goel, Swaroop Vattam, Bryan Wiltgen, Michael E. Helms:
Cognitive, collaborative, conceptual and creative - Four characteristics of the next generation of knowledge-based CAD systems: A study in biologically inspired design. 879-900 - Amitabha Mukerjee, Madan Mohan Dabbeeru:
Grounded discovery of symbols as concept-language pairs. 901-915 - Yan Liang, Ying Liu
Learning the "Whys": Discovering design rationale using text mining - An algorithm perspective. 916-930 - Hitoshi Komoto
A framework for computer-aided conceptual design and its application to system architecting of mechatronics products. 931-946 - Yun Seon Kim, Kyoung-Yun Kim
DCR-based causal design knowledge evaluation method and system for future CAD applications. 947-960 - Niccolò Becattini
Model and algorithm for computer-aided inventive problem analysis. 961-986 - Zhen Li, Derrick Tate, Christopher Lane, Christopher Adams:
A framework for automatic TRIZ level of invention estimation of patents using natural language processing, knowledge-transfer and patent citation metrics. 987-1010 - Ehsan Tarkesh Esfahani
Classification of primitive shapes using brain-computer interfaces. 1011-1019 - Mark D. Fuge
Conceptual design and modification of freeform surfaces using dual shape representations in augmented reality environments. 1020-1032 - Xiang Chen, Shuming Gao, Youdong Yang, Shuting Zhang:
Multi-level assembly model for top-down design of mechanical products. 1033-1048
Volume 44, Number 11, November 2012
- Feilong Fan, Xiao-Ming Zeng:
S-λ bases and S-λ curves. 1049-1055 - Yajuan Li, Chongyang Deng
C-shaped G2 Hermite interpolation with circular precision based on cubic PH curve interpolation. 1056-1061 - Jonathan A. Quinn, Feng Sun, Frank C. Langbein
Improved initialisation for centroidal Voronoi tessellation and optimal Delaunay triangulation. 1062-1071 - Dong-Ming Yan
Variational mesh segmentation via quadric surface fitting. 1072-1082 - Francesca Di Puccio, Simona Celi
A note on the use of first order quadrilateral elements in axisymmetric analysis. 1083-1089 - Yong Tsui Lee, Fen Fang:
A new hybrid method for 3D object recovery from 2D drawings and its validation against the cubic corner method and the optimisation-based method. 1090-1102 - Denys Plakhotnik
Computing of the actual shape of removed material for five-axis flat-end milling. 1103-1114 - Long Zeng, Yong-Jin Liu, Sang Hun Lee
Q--Complex: Efficient non-manifold boundary representation with inclusion topology. 1115-1126 - Wei-Cheng Xie, Xiu-Fen Zou, Jian-Dong Yang, Jie-Bin Yang:
Iteration and optimization scheme for the reconstruction of 3D surfaces based on non-uniform rational B-splines. 1127-1140 - Cong Yue, Hai-Jun Su
A hybrid computer-aided linkage design system for tracing open and closed planar curves. 1141-1150
Volume 44, Number 12, December 2012
- Johanna Senatore, Stéphane Segonds, Walter Rubio
Correlation between machining direction, cutter geometry and step-over distance in 3-axis milling: Application to milling by zones. 1151-1160 - Wenlan Ba, Lixin Cao, Jian Liu:
Research on 3D medial axis transform via the saddle point programming method. 1161-1172 - Evila L. Melgoza, Lídia Serenó, Antoni Rosell, Joaquim Ciurana:
An integrated parameterized tool for designing a customized tracheal stent. 1173-1181 - Lung-Chun Wang, Yen-Chu Hung:
Hole filling of triangular mesh segments using systematic grey prediction. 1182-1189 - Atul Thakur
Improving performance of rigid body dynamics simulation by removing inaccessible regions from geometric models. 1190-1204 - María José Rupérez
Simulation of the behavior of the calfskin used as shoe upper material in footwear CAD. 1205-1216 - Xiao-Diao Chen, Weiyin Ma
Geometric point interpolation method in R3 space with tangent directional constraint. 1217-1228 - Limin Zhu, Han Ding, Youlun Xiong:
Simultaneous optimization of tool path and shape for five-axis flank milling. 1229-1234 - Xiangzhi Wei, Ajay Joneja
Optimal uniformly monotone partitioning of polygons with holes. 1235-1252 - Chao Wang
Robust shape normalization of 3D articulated volumetric models. 1253-1268 - Xunnian Yang
Approximate R3-spline surface skinning. 1269-1276 - Gil Ho Yoon, Jae Chung Heo:
Constraint force design method for topology optimization of planar rigid-body mechanisms. 1277-1296
manage site settings
To protect your privacy, all features that rely on external API calls from your browser are turned off by default. You need to opt-in for them to become active. All settings here will be stored as cookies with your web browser. For more information see our F.A.Q.
last updated on 2024-12-27 21:15 CET by the dblp team
all metadata released as open data under CC0 1.0 license
see also: Terms of Use | Privacy Policy | Imprint
dblp was originally created in 1993 at:
since 2018, dblp has been operated and maintained by:
the dblp computer science bibliography is funded and supported by: