default search action
9th NEMS 2014: Waikiki Beach, HI, USA
- 9th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, NEMS 2014, Waikiki Beach, HI, USA, April 13-16, 2014. IEEE 2014, ISBN 978-1-4799-4726-3
M1A: Best Student Paper Award Finalists
- Nguyen Van Toan
, Tomohiro Kubota, Halubai Seknar, Seiji Samukawa
Fabrication and evaluation of silicon micromechanical resonator using neutral beam etching technology. 1-5 - Zheng Fan, Miao Yu, Gautham Dharuman, Xudong Fan, Lixin Dong
Nanorobotic end-effectors: Design, fabrication, and in situ characterization. 6-11 - Christoph Glacer, Alfons Dehe, David Tumpold, Rainer Laur:
Silicon microspeaker with out-of-plane displacement. 12-16 - Ferdi Hizal, Natthakan Rungraeng, Soojin Jun, Chang-Hwan Choi
Nano-engineered alumina surfaces for prevention of bacteria adhesions. 17-22 - Qili Zhao, Maosheng Cui, Chunyang Zhang, Jin Yu, Mingzhu Sun, Xin Zhao:
Robotic enuleation for oocytes. 23-27
M1B: Micro/Nano Sensors & Actuators (I)
- Xiaofeng Zhou
Design and fabrication of a micro-electromechanical system sandwich capacitive accelerometer. 28-31 - Hutomo Suryo Wasisto
In-plane-excited silicon nanowire arrays-patterned cantilever sensors for enhanced airborne particulate matter exposure detection. 32-37 - Hsu-Chao Hao, Ming-Chang Chiang, Da-Jeng Yao:
Detection of hazardous vapors including mixture in different conditions using surface acoustic wave device array. 38-41
M1C: Microfluidics & BioMEMS (I)
- Chung-Yao Yang, Kai-Wei Liao, Chao-Min Cheng, J. Andrew Yeh
Influences of locally mechanical stimulation on cellular behaviors via microfabrication approach. 42-46 - Xuan-Fu Chen, Ju-Nan Kuo:
Blood separation and plasma preparation on a compact disk microfluidic chip. 47-50 - Lung-Jieh Yang
Dynamic attachment of HepG2 in fractal microchannels. 51-54 - Taylor Busch, Bo Ma, Steve Tung:
Focus ion beam based nanofluidic system for biomolecule characterization. 55-59
M1E: Printed Electronics & MEMS Commercialization QED Cooling of Electronics
- Weiwei Huang, Yuekun Zheng, Jin Wei, Yihong Lin, Mingfeng Zhuang, Wei Wang, Jianyi Zheng, Yongqiang Hong, Daoheng Sun:
Electrosprayed membrane with heat treatment. 60-63 - Zhaojie Yu, Yihong Lin, Weiwei Huang, Mingfeng Zhuang, Yongqiang Hong, Gaofeng Zheng
Multi spinnerets electrospinning with assistant sheath gas. 64-67 - Aurelia Plihon, Vincent Fischer, Fabrice Domingues Dos Santos, Romain Gwoziecki:
Printed actuators made with electroactive polymers on flexible substrates. 68-71
M1F: Carbon Nanomaterials Based Devices
- Haider Al-Mumen, Lixin Dong
Highly stable chemical N-doping of graphene nanomesh FET. 72-76 - Federico Buja, Jaap Kokorian
First adhesion measurements of conductive ultrananocrystalline diamond MEMS sidewalls. 77-80 - Thomas Ackermann
Improved performance of transparent silver nanowire electrodes by adding carbon nanotubes. 81-85 - Jiaqi Wang, Kean C. Aw
Optimization of valveless micropump for drug delivery. 86-88
M2D: Micro/Nano Robotics, Assembly & Automation THE NANOWORKBENCH: Automated Nanorobotic system inside of Scanning Electron or89
- Ivo Burkart, Volker Klocke, Eva Maynicke:
The Nanoworkbench: Automated Nanorobotic system inside of scanning electron or focused ion beam microscopes. 89-92 - Xiang Wei, Bing Li, Lijiao Jia, Zhuangde Jiang, Lei Chen:
Reduction of machining motion error of an aspheric surface coordinate measuring machine by a new error compensation method. 93-96 - Yi-Chuan Lin, Kerwin Wang:
Position determination of a ball grid array by automated optical inspection method. 97-101 - Dongmyoung Shin, Sung Gil Park, Byung Soo Song, Eung Su Kim, Oleg Kupervasser
Precision improvement of MEMS gyros for indoor mobile robots with horizontal motion inspired by methods of TRIZ. 102-107
M2E: Micro/Nano/Molecular Fabrication
- Ho-Chiao Chuang, Wei-Hong Lai, Chih-Chung Huang, Ai-Ho Liao, Chih-Kuang Yeh
Fabrication of through-silicon vias (TSV) by nickel electroplating in supercritical CO2. 108-112 - Amarendra Kumar, Kunal Kashyap, Kai-Wei Liao, Max T. Hou, J. Andrew Yeh
Super hydrophobic/super hydrophilic transparent nanostructured glass fabricated by wet etching. 113-116 - Y. J. Chang, C. H. Chang, C. C. Ho, J. C. Hsu, C. L. Kuo:
Laser direct nano-structuring assisted by water droplets. 117-120 - Yuanqi Zeng, Bo Tao, Zhouping Yin:
Molecular dynamics simulation of molecular orientation transformation of pentacene on a-SiO2. 121-125 - Yuan-Jen Chang, Han-Kuan Huang:
Nano-scale tip fabricated by electro-chemical machining for nano lithography. 126-129
M2F: Micro/Nano Sensors & Actuators (II)
- Dorota Kwasny, Maria Dimaki
Nanoscaled biological gated field effect transistors for cytogenetic analysis. 130-134 - Kozaburo Takebe, Hidetoshi Miyashita, Keisuke Takano, Masanori Hangyo, Sang-Seok Lee:
Electromagnetic wave absorption characteristics of H-shaped fractal antenna for multi-band microbolometer. 135-138 - Mahesh Angira
A novel interdigitated, inductively tuned, capacitive shunt RF - MEMS switch for X and K bands applications. 139-142 - Dehui Xu, Guoqiang Wu, Bin Xiong, Yuelin Wang:
A resonant MEMS magnetic field sensor with electromagnetic induction sensing. 143-146
M2G: Microfluidics & BioMEMS (II) A Nano-Spike Electroporation Chip for Low Voltage Delivery of Molecules to Cancer Cells147
- K. Riaz
An Aluminum Nano-Spike electroporation chip for low voltage delivery of molecules to cancer cells. 147-151 - Wei-lun Kao, Hong-Yuan Huang, Da-Jeng Yao:
Oviduct-mimetic chip to improve in vitro fertilization for oligozoospermia. 152-156 - Gwendolyne Helle, Clarisse Mariet, Gérard Cote
Liquid-liquid two-phase microflow patterns and mass transfer of radionuclides. 157-162
M2G: Microfluidics & BioMEMS (II) A Nano-Spike Electroporation Chip for Low Voltage Delivery of Molecules to Cancer Cells147
- Ai-Ho Liao, Wan-Chun Ma, Ho-Chiao Chuang, Chih-Kuang Yeh
The efficiency of transdermal α-Arbutin delivery after albumin microbubbles treatment with ultrasound in mice. 163-167 - Asif Iqbal, Sabbir Ahmed Khan, Nafiz Ur Rahman, Tahsin Faraz
Epitaxial growth controlled tailoring of Metal-Insulator (MI) Transition properties of rare earth correlated oxides. 168-171 - Chih-Shuan Lu, Hsiang-Hao Hsu, Ting-Hsuan Chen
Nano-porous membranes mediate podocyte proliferation and morphology. 172-175 - Chun-Ting Lin, Mao-Nan Chang, Yu-Wei Chen, Shu-Hung Tung, Nancy Chu, Chien-Nan Hsiao, Ming-Hua Shiao:
Localized two-step galvanic replacement of a tip apex modification for field sensitive scanning probe microscopy. 176-179
PM1-B: MEMS Sensors
- Yanqing Zhu, Lei Han, Ming Qin, Qing-An Huang
Development of a novel bidirectional electrothermal actuator and its application to RF MEMS switch. 180-185 - Zhongliang Yu, Yulong Zhao, Lili Li, Cun Li, Guanwu Zhou, Bian Tian:
Achievement of a high-sensitive and high-overload sensor based on the bossed-diaphragm structure. 186-190 - Che-Hsin Lin, Lung-Ming Fu, Chia-Yen Lee:
MEMS-based humidity sensor based on thiol-coated gold nanoparticles. 191-194 - Qiang Shen, Weizheng Yuan, Beini Qu, Jianbing Xie, Honglong Chang
A virtual gyroscope based-on a single-chip four-microgyroscope array. 195-198 - Yuxian X. Liu, Weilei L. Feng, Chunhua H. He, Long Wang, Liguo G. Dong, Qiancheng C. Zhao, Zhenchuan C. Yang, Guizhen Yan:
Design of a digital closed control loop for the sense mode of a mode-matching MEMS vibratory gyroscope. 199-203 - Xiaodong Sun, Weizheng Yuan, Sen Ren, Jinjun Deng, Chengyu Jiang:
A low-noise CMOS interface circuit for resonant pressure sensor. 204-207 - Long Wang, Qiancheng Zhao, Minghao Nie, Dachuan Liu, Yuxian Liu, Junjie Yan, Zhenchuan Yang, Guizhen Yan:
Digital fast startup procedure for micro-machined vibratory gyroscopes using optimized fuzzy control strategy. 208-211 - Peigang Deng, Wei Ma:
Nonlinearity investigation of the MEMS scanning mirror with electrostatic comb drive. 212-215 - Meng Tang, Alberto Cagliani, Zachary J. Davis, Lin He:
Pulse mode actuation-readout system based on MEMS resonator for liquid sensing. 216-219 - Zhuoqi Li, Xinwu Xie
On-chip manipulating and impedance spectroscopy sensing of single mouse embryo. 220-224
PM2-B: Micro/Nano Sensors
- Jin You, Hyowon Moon, Boo Yong Lee, Ju Young Jin, Zi Eun Chang, Jun-Kyo Francis Suh, Jinseok Kim, Jungyul Park
Cardiomyocyte contractile force changes in response to chemical environments. 225-228 - Sen Ren, Weizheng Yuan, Xiaodong Sun, Jinjun Deng, Dayong Qiao, Chengyu Jiang:
Microfabricated SOI pressure sensor using dynamically balanced lateral resonator. 229-232 - X. Y. Liu, J. H. Shen, Fangmin Guo, M. J. Wang, L. Ding, S. H. Zhang:
The weak-light readout and display of lower dimension quantum effect photodetector. 233-236 - Yanxiao Li, Xiaobo Zou, Xiaowei Huang, Jiyong Shi, Jiewen Zhao:
A gas sensor based on natural dye-sensitized TiO2 thin film for pork-borne amines monitor. 237-242 - Zhenyu Luo, Deyong Chen, Junbo Wang:
Resonant pressure sensor with through-glass electrical interconnect based on SOI wafer technology. 243-246
PM2-C: Carbon Nanomaterials Based Devices
- Wang Pan, Yang Li, Wuzhu Deng, Yangyang Chen, Wenli Zhou:
A dual-gate ambipolar graphene field effect transistor. 247-250 - Matthias Goldsche, Tymofiy Khodkov, Pascal Kaienburg
Low-temperature compatible electrostatic comb-drive actuators with integrated graphene. 251-255 - Nirjhor Tahmidur Rouf, Ashfaqul Haq Deep, Rusafa Binte Hassan, Sabbir Ahmed Khan, Mahmudul Hasan, Sharif Mohammad Mominuzzaman:
Current-voltage characteristics of CNTFET considering non-ballistic conduction: Effect of dielectric constant. 256-259 - Chuan Chang, Liang-You Lin, Yi-Shiuan Wu, Fan-Gang Tseng
Enhancement of catalytic efficiency by partial replacement of ruthenium with platinum nanoparticles for direct methanol fuel cell. 260-264
T1A: Best Conference Paper Award Finalists
- San Yoon, Hankeun Lee, Arwa Fraiwan
A micro-sized microbial solar cell. 265-268 - Alireza Narimannezhad, Joshah Jennings, Marc H. Weber, Kelvin G. Lynn:
Microfabrication of high aspect ratio microtube arrays to store high density charged particles. 269-274 - Soren Zimmermann, Sergio Alfredo Garnica Barragan, Sergej Fatikow:
Nanorobotic processing of graphene for rapid device prototyping. 275-280 - Chi-Fan Chen, Kuo-Wei Chang, Ting-Ru Yueh, Hong-Yuan Huang, Chen-Shien Liu
A microfluidic device for automatic embryo trapping and coculture with stromal cells in vitro. 281-284 - Tuhin Subhra Santra
Nanolocalized single cell membrane nanoelectroporation. 285-288 - Zhuonan Miao, Christopher Y. H. Chao, Yi Chiu, Chia-Wei Lin, Yi-Kuen Lee:
Design and fabrication of micro hot-wire flow sensor using 0.35μm CMOS MEMS technology. 289-293
T1B: Microfluidics & BioMEMS (III) Design and Fabrication of Micro Hot-wire Flow Sensor Using 0.35mm CMOS MEMS Technology289
- Dong Kim, Kyung Chun Kim, Jasesool Shim:
Numerical simulation on the formation of a toroidal microvortex by the optoelectrokinetic effect. 294-297 - Ho-Cheng Lee, Che Hsin Lin:
Liquid-liquid phase separator for synthesizing gold nanoparticles in toluene. 298-301 - Qihui Fan, Wenqi Hu, Aaron T. Ohta:
Molecular delivery and transfection by laser-induced oscillating microbubbles. 302-305 - Yaqun Wang, Jun Zhang, Yi Shi, Lijia Pan
An accessible superhydrophobic coating with nanostructure for continuously oil/water separation. 306-310 - Peigang Deng, Hongbin Mei, Yi-Kuen Lee:
A nonlinear cell electroporation model and its verification using micro electroporation chips. 311-314 - Yue Chen, Aram J. Chung, Ting-Hsiang Wu, Michael A. Teitell, Dino Di Carlo, Pei-Yu Chiou:
Pulsed laser activated cell sorting with three dimensional sheathless inertial focusing. 315-318 - Sylvain Toru, François Buret, Marie Frénéa-Robin
Towards improved finite element modeling of SSAW-based acoustic tweezers. 319-322 - Héctor Hugo Pérez Garza
Enabling local deposition and controlled synthesis of Au-nanoparticles using a femtopipette. 323-328 - Po-Yu Peng, Wei-Chieh Hsu, Tung-Ming Pan, Yen-Heng Lin
Rapid detection of bladder cancer using an immunoassay transistor combined with DNA-labeling technique in a microfluidic chip. 329-332 - Wei Ma, Ronghao Zeng, Dayu Liu, Yitshak Zohar, Yi-Kuen Lee:
SOI technology-based microfiltration system for circulating tumor cells isolation and enumeration. 333-336
T1D: Micro/Nano Sensors & Actuators (III)
- J. G. Gao, H. Wang, P. C. Ma, Wengang Wu:
The phenomenon of "sharp corner" of Electrolyte-Oxide-Semiconductor structure for copper ions detection. 337-340 - Yangxi Zhang
A SOI sandwich differential capacitance accelerometer with low-stress package. 341-345 - Cun Li, Yulong Zhao, Rongjun Cheng:
A micro resonant acceleration sensor comprising silicon support with temperature isolator and quartz doubled ended tuning fork. 346-349 - Pei Chen, Yulong Zhao, Yiyao Li:
Fluid structure interaction analysis and simulation of micromachined cantilever-based flow sensor. 350-353 - Rongjun Cheng, Yulong Zhao, Cun Li:
Feasibility study of a pressure sensor based on double-ended tuning fork quartz resonator. 354-357 - Li Wen, Han Xie, Jiaru Chu, Hai Wang:
Development of microplasma devices arrays for maskless nanoscale material etching. 358-361
T1E: Micro/Nano/Molecular Fabrication (II)
- Tianyu Li, Yiming Zhang, Jin Luo, Jing Chen:
Field-assisted titanium-glass bonding. 362-365 - Chung-Han Lu, Kerwin Wang:
Filling through-silicon vias with conductive ferromagnetic silver-iron composite. 366-369 - Chung-Han Lu, Yi-Chuan Lin, Kerwin Wang, M. J. Dai, C. K. Liu, L. L. Liao, H. C. Chien, Y. S. Chen:
Capacitor discharge sintering with silver-nickel nano-composite in the interconnection of thermoelectric generators. 370-373 - Erwin Berenschot
Fabrication of 2D-extruded fractal structures using repeated corner lithography and etching. 374-377 - Shao-Yu Wang, K. H. Hung, Y. C. Chen, Cheng-Tang Pan, Chung-Kun Yen, W. C. Wang, Zong-Hsin Liu:
Fabrication of piezoelectric zinc oxide nanorods by Electrospraying method. 378-381 - Kun-Tse Tu, Chen-Kuei Chung
Selective patterning of indium tin oxide films using 1064 nm laser for micro parts processing. 382-385
T1F: Nanomaterials (I)
- Jeng Yi Lee, Ray-Kuang Lee
Quantum cloakings hide electronic devices. 386-389 - Kunal Kashyap, Amarendra Kumar, Chung-Yao Yang, Max T. Hou, J. Andrew Yeh
Silicon substrate strength enhancement depending on nanostructure morphology. 390-393 - Arwa Fraiwan
A paper-based bacteria-powered battery having high power generation. 394-397
T2A: CM Ho Best Paper Award in Micro/Nano Fluidics Finalists
- Song-Bin Huang, Yang Zhao
A clogging-free microfluidic platform for size independent single cancer cellular electrical property characterization. 398-402 - Pengcheng C. Ma, Kai Zhang, Wengang Wu:
Novel 3D nano-fence matrixes for integrated nanofluidic channels. 403-406 - Chih-Chung Chen, Yu-An Chen, Da-Jeng Yao:
Rare cells detection by selective enrichment with a novel multilayer concentric filter device. 407-410 - Puwanan Chumtong, Masaru Kojima, Mitsuhiro Horade, Kenichi Ohara, Kazuto Kamiyama, Yasushi Mae, Yoshikatsu Akiyama
Analytical design and fabrication of thermal latch valve driven flexible microscaffold for applications in tissue engineering. 411-416 - Wei Hu, Wen Liu, Fu-Yun Zhu, Xiao-Sheng Zhang, Haixia Zhang
The fabrication of PDMS-based functional surface mimicking the namib desert beetle back for collecting water vapor in the air. 417-421 - Zheng Chen, Xinzhou Wu, T. Zhou, Zheng Cui:
Printed low temperature metal oxide thin film transistors. 422-425 - Yong-Yu Hsu, Kuo-Wei Chang, Tse-Shao Chen, Kang-Yun Lee, Chen-Shien Liu
An integrated microfluidic chip for the study of metastasis and angiogenesis. 426-429 - Hoa Le-Thanh, Nhut Tran-Minh, Hai Le The
A novel design of hollow microneedle for blood sample collection. 430-435 - Shih-Shaun Huang, Lien-Yu Hung, Gwo-Bin Lee
Nucleus extraction from cells by optical-induced cell lysis on a continuous flow platform. 436-439 - Yu-Jui Che, Huei-Wen Wu, Lein-Yu Hung, Hwan-You Chang, Kuan Wang, Gwo-Bin Lee
An integrated microfluidic system for screening of peptides specific to colon cancer cells and colon cancer stem cells using the phage display technology. 440-443 - Yuting Li, Wentao Zhang, Fang Li:
A miniature Fabry-Perot pressure sensor for intracranial pressure measurement. 444-447 - Haider A. F. Almurib
A memristor-based LUT for FPGAs. 448-453 - Lidong Du
A SOI-MEMS atmosphere pressure sensor and its low stress packaging. 454-457 - Wen Liu, Mengdi Han
Fabrication of spiral-shaped PVDF cantilever based vibration energy harvester. 458-461
T2F: MEMS/NEMS Applications
- Rong Zhu, Zhe Cao, Rui-Yi Que:
Integration of micro sensors with mobile devices for monitoring vital signs of sleep apnea patients. 462-466 - Guanwu Zhou, Yulong Zhao, Fangfang Guo:
A temperature compensation system for silicon pressure sensor based on neural networks. 467-470 - Vaishnavi Nattar Ranganathan, Srihari Rajgopal, Mehran Mehregany
Analysis of practical scaling limits in nanoelectromechanical switches. 471-476 - P. H. Lin, C. T. Pan, Y. C. Chen, F. T. Hsu, S. C. Shen, J. C. Huang, C. M. Chang:
Design and fabrication of lens selectively coated with TFMG for uniform intensity of UV LED. 477-480 - Cong Liu, Quincy Zhuang, Hsin-Chih Yeh:
Three dimensional single-molecule tracking with confocal-feedback microscope. 481-484
PT1-A: Microfluidics
- Wei-Kai Wang, Ju-Nan Kuo:
Capillary kinetics of ferrofluid in hydrophilic microscope slide nanochannels. 485-489 - András József Laki, Lilla Botzheim, Kristóf Iván, Tamás Szabó, Viola Tamasi, Edit I. Buzás, Pierluigi Civera:
Microvesicle fractionation using deterministic lateral displacement effect. 490-493 - Yuan-Yuan Yang, Yi-Chi Wei, Che-Hsin Lin:
High performance thread-based CE-EC system with variable volume injection capability and 3D detection electrodes. 494-497 - Qian Mao
Study of micro-channel shape and material property on cooling performance of high power LED chips. 498-501
PT1-B: MEMS/NEMS Applications
- Lei Li, Kangfa Deng
A convenient wafer level bonding based on unpatterned BCB. 502-506 - Chia-Hui Li, Li-Huan Chieng, Irrigepalli Srinivasa Thimmaraju, Da-Jeng Yao:
Using TD-GC-MS to analyze coffee beans aromas of different roast levels. 507-512 - Danqi Zhao, Xian Huang, Jun He, Li Zhang, Peng Liu, Fang Yang, Dacheng Zhang:
Study on compatible CMOS-MEMS process with surface micromachining for the application of monolithic integration. 513-516
CMOS Technology
- Cheng Liu
A directional anemometer based on MEMS differential pressure sensors. 517-520 - Lu Zhou, Jinyong Zhuang
Enhanced light extraction of organic light emitting diodes by embedding printed polymethyl methacrylate dot array. 521-524 - Po-Li Chen, Wei-Jei Peng, Han-Ting Chen, Hui-Jean Kuo, Yu-Hsin Lin, Yu-Hsiang Tang, Chien-Nan Hsiao, Ming-Hua Shiao:
The illumination uniformity study of diffuser plates for reflective LED desk lighting. 525-529 - Yu-Min Fu, Yen-Ju Liang, Y. T. Cheng, Pu-Wei Wu:
Size scaling of printed microstructures using a lift-off printing (LoP) process. 530-531
PT2-A: Nanophotonics Infrared Absorption Enhancement Phenomenon on Nano Materials
- Yiting Yu, Hans Zappe:
Experimental investigation of 3D plasmon talbot effect. 532-535 - Cheng-Yang Liu
Photonic nanojet in non-spherical micro-particles. 536-539 - Etsuo Maeda:
Fabrication technology for three dimensional metallic photonic crystal slab. 540-543 - Mingyang Xie, Yong Wang, Dong Sun:
Optical manipulation of pairing biological cells using an artificial potential field based controller. 544-548
PT2-B: Micro/Nano Fabrication
- Jae Hong Park, Hyun Ik Jang, Jun Yong Park
Reversible nano-lithography between materials. 549-550 - Mao-Jung Huang, Nien-Nan Chu, Chun-Ming Chang, Ming-Hua Shiao, Chien-Nan Hsiao:
Development of catalytic etching using dual materials. 551-554 - T. Lin, T. Huang, Y. Yang, K. Tseng, C. Fu:
Throughput comparison of multi-exposure and multi-beam laser interference lithography on nano patterned sapphire substrate process. 555-559 - Xian Huang, Jun He, Li Zhang, Fang Yang, Dacheng Zhang:
Evaluation of Au/a-Si eutectic wafer level bonding process. 560-563 - Mao-Jung Huang, Chun-Ming Chang, Nien-Nan Chu, Yu-Hsiang Tang, Chii-Rong Yang:
Development of composite vertical wet etching for silicon material. 564-567 - Jun He, Xian Huang, Li Zhang, Danqi Zhao, Fang Yang, Wei Wang, Dacheng Zhang:
Mechanical strength measurement of micro anchor-beam combined structure fabricated by silicon-on-glass process. 568-571 - Zong-Ming Su, Xiao-Sheng Zhang, Haixia Zhang
Self-assembly of colloid nano particle by evaporation-induced method. 572-577 - Peng Liu, Yiyang Chang, Jinwen Zhang:
The SWCNTs film-silicon vertical heterojunction fabricated by drop-casting technique. 578-581 - Tao Yu, Mengge Li, Yu Xiang, Jinwen Zhang:
Large scale and high yield assembly of SWNTs by sacrificial electrode method. 582-585
W1A: Micro/Nano Sensors & Actuators (V)
- S. Amir Mousavi Lajimi, Glenn R. Heppler, Eihab M. Abdel-Rahman
The application of a new beam-rigid body MEMS gyroscope in the frequency-modulation mode. 586-591 - Kuo-Chun Tseng, Te-Hsun Lin, Norbert Modsching, Weileun Fang, Chien-Chung Fu
Polymer material grating used on contactless sub-wavelength MEMS physical sensors. 592-595 - Po-Fat Chong, Xiaomei Shi, Ching-Hsiang Cheng
A capacitive micromachined ultrasonic transducer (CMUT) array with nickel membranes in a convex shape. 596-599 - Zhikang Li, Libo Zhao, Zhuangde Jiang, Zhiying Ye, Yulong Zhao:
Capacitive micromachined ultrasonic transducer for ultra-low pressure detection. 600-603 - Cheng-Hsin Chuang
Immunosensor with well-separated polyaniline nanowires for determination of isoelectric point based on electrochemical impedance spectroscopy. 604-608 - Chung-Kun Yen, C. H. Tsao, Cheng-Tang Pan, H. C. Wu, Y. C. Lai, Zong-Hsin Liu, Y. L. Lin, Liwei Lin
Electrospun PVDF fibers on bio-wings using multi-spinnerets. 609-613
W1B: Micro/Nano Sensors & Actuators (VI)
- Y. C. Lai, H. C. Wu, C. T. Pan, C. K. Yen, C. H. Tsao, Liwei Lin
Co-axially electrospun PVDF fibers with hollow wall to enhance potential output. 614-617 - Hai Wang, Xuan Zhou, Wanqun Qiu, Bangchen Fu, Li Wen:
Simulation and experiments of broadband piezoelectric energy harvesting devices. 618-621 - Hai Wang, Yang An, Zhan Wang, Han Li, Li Wen:
Simulation of piezoelectric plasma micro-thruster. 622-625 - Cheng-Hsin Chuang
Multi-antibody array chip for immunoassay of different-grade bladder cancer cell lysates based on DEP manipulations of nanoprobes. 626-627 - Nurul Amziah Md Yunus
The demand model of electric field strength on microelectrode designed for AC electrokinetic applications. 628-632 - Yung-Chiang Chung, Po-Wen Chen, Chao-Ming Fu, Jyun-Hong Jheng:
Particles sorting in micro-channel using magnetic tweezers and optical tweezers. 633-634 - Arwa Fraiwan
A micro-sized microbial fuel cell with electrochemical sensing functionality. 635-638 - Simeng Chen, Chunhui Dai
A miniaturized parallel analyses platform for rapid electrochemical discoveries of microbial activities. 639-642
W1D: Microfluidics & BioMEMS (VII)
- Suwen Li
Multi-walled carbon nanotube coated microelectrode array for high-throughput, sensitive dopamine detection. 643-646 - Ko-Wei Chang, Jing-Lun Li, Ching-Hsuan Yang, Shu-Chu Shiesh, Gwo-Bin Lee
Measurement of glycated hemoglobin using an aptamer/antibody assay on an integrated microfluidic system. 647-650 - Hai Le The
A novel micromixer with multimixing mechanisms for high mixing efficiency at low Reynolds number. 651-654
W1E: Nanomaterials (II)
- Chung-Yao Yang, Amarendra Kumar, J. Andrew Yeh
Cellular behaviors on chemically/physically modified SiO2 surfaces. 655-659 - Akihiro Tomioka, Kenji Ozasa, Mizuki Hirayama, Hayami Tsukamoto, Akihiro Masuda, Shougo Maeda:
Lowered melting point of polyvinyl pyrrolidone bound 1D silver nanowires. 660-663 - Anju Toor, Jim C. Cheng, Albert P. Pisano:
Synthesis and characterization of gold nanoparticle/SU-8 polymer based nanocomposite. 664-668
W1F: Nanomedicine & Nanobiology
- Haijiao Liu, Jun Wen, Jun Liu
Mechanical characterization of cancer cell nuclei in situ. 669-673 - Tzu-Chun Liao, Kai-Wei Liao, Wen-Shiang Chen
Fibroblasts connection on nano/micro silicon. 674-677 - Ting-Hsuan Chen
Characterization of cellular mechanical torque by rotation of ferromagnetic nanowire. 678-681 - Mi Jung
Plasmonic properties of metal nanodot arrays with same diameter utilizing nanoporous alumina mask. 682-683
manage site settings
To protect your privacy, all features that rely on external API calls from your browser are turned off by default. You need to opt-in for them to become active. All settings here will be stored as cookies with your web browser. For more information see our F.A.Q.
last updated on 2024-12-27 21:33 CET by the dblp team
all metadata released as open data under CC0 1.0 license
see also: Terms of Use | Privacy Policy | Imprint
dblp was originally created in 1993 at:
since 2018, dblp has been operated and maintained by:
the dblp computer science bibliography is funded and supported by: