Tablesaw push stick

Table Saw Push-Shoe / Push-Stick Combo Free Download Link Below This works as your typical push stick, but with the added upper handle and the heel on the bottom, it doubles as a push shoe. I made it from 1/2″ plywood. I cut the flat parts on the bottom with the table saw, and the rest with my scroll saw. You could also use a ... Read More

thetinman's Project

Over the last few years I have tried a variety of push blocks and push sticks. And the one I still go to the most is my diy push block. So I wanted to show you how I made it and how it works. #pushblock #tablesaw #tools #diy

Woodchuck2010's Project

Bricofleur's Project

Safety is all about putting some distance between your body parts and the sharp metal bits that shape wood.

Saw Handle Push Stick: 10 Steps (with Pictures)

This push block's unique design increases safety & control.

Improve the safety and accurate of your table saw cuts with this adjustable, shop-made accessory.

Making an easy to use push stich from scrap plywood.

Construct a pair of these push sticks for guiding lumber when using table saws, band saws and jointers.

Many projects need thin strips of wood cut, and this is most accurate when done on the table saw. However, regular push-sticks are lacking in safety when making these cuts. This table saw push stick (or push shoe) works on various thicknesses of stock, an

When I teach, students want to make a tracing of the push stick that I use. In addition a reader noted my use of it in one of my DVDs and asked for the design. I had seen a pushstick of similar design, made one and found it useful as the placement of the handle allowed me to apply downward force to the front end of the stock. It also keeps the hands well clear of the cut. Here is the design, so you can make one yourself. I prefer to make these from good quality plywood, and rout the edges…

A good combination square, properly used, is worth its weight in gold. Let us show you eight practical uses.