功能與 API 總覽

Android 15 為開發人員推出了強大的新功能和 API。以下各節概略說明這些功能，協助您開始使用相關的 API。

相機與媒體

Android 15 內含多項功能來改善相機和媒體體驗，並提供各種工具和硬體，協助創作者將願景化為 Android 裝置。

如要進一步瞭解 Android 媒體和相機的最新功能與開發人員解決方案，請參閱 Google I/O 大會的 Building Modern Android Media and Camera Experiences (打造新型 Android 媒體和相機體驗) 講座。

低光源增強

Android 15 introduces Low Light Boost, an auto-exposure mode available to both Camera 2 and the night mode camera extension. Low Light Boost adjusts the exposure of the Preview stream in low-light conditions. This is different from how the night mode camera extension creates still images, because night mode combines a burst of photos to create a single, enhanced image. While night mode works very well for creating a still image, it can't create a continuous stream of frames, but Low Light Boost can. Thus, Low Light Boost enables camera capabilities, such as:

• Providing an enhanced image preview, so users are better able to frame their low-light pictures
• Scanning QR codes in low light

If you enable Low Light Boost, it automatically turns on when there's a low light level, and turns off when there's more light.

Apps can record off the Preview stream in low-light conditions to save a brightened video.

For more information, see Low Light Boost.

應用程式內相機控制項

Android 15 adds an extension for more control over the camera hardware and its algorithms on supported devices:

• Advanced flash strength adjustments enabling precise control of flash intensity in both SINGLE and TORCH modes while capturing images.

HDR 進步空間控制項

Android 15 chooses HDR headroom that is appropriate for the underlying device capabilities and bit-depth of the panel. For pages that have lots of SDR content, such as a messaging app displaying a single HDR thumbnail, this behavior can end up adversely influencing the perceived brightness of the SDR content. Android 15 lets you control the HDR headroom with setDesiredHdrHeadroom to strike a balance between SDR and HDR content.

音量控制項

Android 15 introduces support for the CTA-2075 loudness standard to help you avoid audio loudness inconsistencies and ensure users don't have to constantly adjust volume when switching between content. The system leverages known characteristics of the output devices (headphones and speaker) along with loudness metadata available in AAC audio content to intelligently adjust the audio loudness and dynamic range compression levels.

To enable this feature, you need to ensure loudness metadata is available in your AAC content and enable the platform feature in your app. For this, you instantiate a LoudnessCodecController object by calling its create factory method with the audio session ID from the associated AudioTrack; this automatically starts applying audio updates. You can pass an OnLoudnessCodecUpdateListener to modify or filter loudness parameters before they are applied on the MediaCodec.

// Media contains metadata of type MPEG_4 OR MPEG_D
val mediaCodec = …
val audioTrack = AudioTrack.Builder()
                                .setSessionId(sessionId)
                                .build()
...
// Create new loudness controller that applies the parameters to the MediaCodec
try {
   val lcController = LoudnessCodecController.create(mSessionId)
   // Starts applying audio updates for each added MediaCodec
}

AndroidX media3 ExoPlayer will also be updated to use the LoudnessCodecController APIs for a seamless app integration.

虛擬 MIDI 2.0 裝置

Android 13 added support for connecting to MIDI 2.0 devices using USB, which communicate using Universal MIDI Packets (UMP). Android 15 extends UMP support to virtual MIDI apps, enabling composition apps to control synthesizer apps as a virtual MIDI 2.0 device just like they would with an USB MIDI 2.0 device.

提高 AV1 軟體解碼效率

dav1d, the popular AV1 software decoder from VideoLAN is available for Android devices that don't support AV1 decode in hardware. dav1d is up to 3x more performant than the legacy AV1 software decoder, enabling HD AV1 playback for more users, including some low and mid tier devices.

Your app needs to opt-in to using dav1d by invoking it by name "c2.android.av1-dav1d.decoder". dav1d will be made the default AV1 software decoder in a subsequent update. This support is standardized and backported to Android 11 devices that receive Google Play system updates.

開發人員工作效率和工具

在改善效率提升中心的大部分工作中，我們都會以 Android Studio、Jetpack Compose 和 Android Jetpack 程式庫等工具為基礎，不斷尋找合適的方法來幫助您更輕鬆地實現願景。

OpenJDK 17 更新

Android 15 會繼續更新 Android 核心程式庫，以便與最新版 OpenJDK LTS 中的功能保持一致。

新功能和改善項目如下：

• 改善 NIO 緩衝區的生活品質
• 訊息串
• 其他 math 和 strictmath 方法
• util 套件更新，包括已排序的 collection、map 和 set
• 「Deflater」的「ByteBuffer」支援
• 安全性更新，例如 X500PrivateCredential 和安全金鑰更新

這些 API 是透過 Google Play 系統更新，在超過十億部搭載 Android 12 (API 級別 31) 以上版本的裝置上更新，因此您可以指定最新的程式設計功能。

改善 PDF

Android 15 includes substantial improvements to the PdfRenderer APIs. Apps can incorporate advanced features such as rendering password-protected files, annotations, form editing, searching, and selection with copy. Linearized PDF optimizations are supported to speed local PDF viewing and reduce resource use. The Jetpack PDF library uses these APIs to simplify adding PDF viewing capabilities to your app.

The PdfRenderer has been moved to a module that can be updated using Google Play system updates independent of the platform release, and we're supporting these changes back to Android 11 (API level 30) by creating a compatible pre-Android 15 version of the API surface, called PdfRendererPreV.

自動切換語言修正功能

Android 14 新增了裝置端的多語言辨識功能，支援自動切換語言，但這可能會導致字詞遭到捨棄，尤其是在語言切換時，兩個語音之間的停頓幅度較小。Android 15 新增了額外控制項，協助應用程式調整相關用途。EXTRA_LANGUAGE_SWITCH_INITIAL_ACTIVE_DURATION_TIME_MILLIS 會限制自動切換至音訊工作階段開頭，EXTRA_LANGUAGE_SWITCH_MATCH_SWITCHES 則會在經過指定數量的切換按鈕後停用語言切換功能。如果您預期會在工作階段應自動偵測單一語言，就很適合使用這些選項。

改良的 OpenType Variable Font API

Android 15 improves the usability of the OpenType variable font. You can create a FontFamily instance from a variable font without specifying weight axes with the buildVariableFamily API. The text renderer overrides the value of wght axis to match the displaying text.

Using the API simplifies the code for creating a Typeface considerably:

val newTypeface = Typeface.CustomFallbackBuilder(
            FontFamily.Builder(
                Font.Builder(assets, "RobotoFlex.ttf").build())
                    .buildVariableFamily())
    .build()

Typeface newTypeface = Typeface.CustomFallbackBuilder(
            new FontFamily.Builder(
                new Font.Builder(assets, "RobotoFlex.ttf").build())
                    .buildVariableFamily())
    .build();

Previously, to create the same Typeface, you would need much more code:

val oldTypeface = Typeface.CustomFallbackBuilder(
            FontFamily.Builder(
                Font.Builder(assets, "RobotoFlex.ttf")
                    .setFontVariationSettings("'wght' 400")
                    .setWeight(400)
                    .build())
                .addFont(
                    Font.Builder(assets, "RobotoFlex.ttf")
                        .setFontVariationSettings("'wght' 100")
                        .setWeight(100)
                        .build()
                )
                .addFont(
                    Font.Builder(assets, "RobotoFlex.ttf")
                        .setFontVariationSettings("'wght' 200")
                        .setWeight(200)
                        .build()
                )
                .addFont(
                    Font.Builder(assets, "RobotoFlex.ttf")
                        .setFontVariationSettings("'wght' 300")
                        .setWeight(300)
                        .build()
                )
                .addFont(
                    Font.Builder(assets, "RobotoFlex.ttf")
                        .setFontVariationSettings("'wght' 500")
                        .setWeight(500)
                        .build()
                )
                .addFont(
                    Font.Builder(assets, "RobotoFlex.ttf")
                        .setFontVariationSettings("'wght' 600")
                        .setWeight(600)
                        .build()
                )
                .addFont(
                    Font.Builder(assets, "RobotoFlex.ttf")
                        .setFontVariationSettings("'wght' 700")
                        .setWeight(700)
                        .build()
                )
                .addFont(
                    Font.Builder(assets, "RobotoFlex.ttf")
                        .setFontVariationSettings("'wght' 800")
                        .setWeight(800)
                        .build()
                )
                .addFont(
                    Font.Builder(assets, "RobotoFlex.ttf")
                        .setFontVariationSettings("'wght' 900")
                        .setWeight(900)
                        .build()
                ).build()
        ).build()

Typeface oldTypeface = new Typeface.CustomFallbackBuilder(
    new FontFamily.Builder(
        new Font.Builder(assets, "RobotoFlex.ttf")
            .setFontVariationSettings("'wght' 400")
            .setWeight(400)
            .build()
    )
    .addFont(
        new Font.Builder(assets, "RobotoFlex.ttf")
            .setFontVariationSettings("'wght' 100")
            .setWeight(100)
            .build()
    )
    .addFont(
        new Font.Builder(assets, "RobotoFlex.ttf")
            .setFontVariationSettings("'wght' 200")
            .setWeight(200)
            .build()
    )
    .addFont(
        new Font.Builder(assets, "RobotoFlex.ttf")
            .setFontVariationSettings("'wght' 300")
            .setWeight(300)
            .build()
    )
    .addFont(
        new Font.Builder(assets, "RobotoFlex.ttf")
            .setFontVariationSettings("'wght' 500")
            .setWeight(500)
            .build()
    )
    .addFont(
        new Font.Builder(assets, "RobotoFlex.ttf")
            .setFontVariationSettings("'wght' 600")
            .setWeight(600)
            .build()
    )
    .addFont(
        new Font.Builder(assets, "RobotoFlex.ttf")
            .setFontVariationSettings("'wght' 700")
            .setWeight(700)
            .build()
    )
    .addFont(
        new Font.Builder(assets, "RobotoFlex.ttf")
            .setFontVariationSettings("'wght' 800")
            .setWeight(800)
            .build()
    )
    .addFont(
        new Font.Builder(assets, "RobotoFlex.ttf")
            .setFontVariationSettings("'wght' 900")
            .setWeight(900)
            .build()
    )
    .build()
).build();

Here's an example of how a Typeface created with both the old and new APIs renders:

In this example, the Typeface created with the old API doesn't have the capability to create accurate font weights for the 350, 450, 550 and 650 Font instances, so the renderer falls back to the closest weight. So in this case, 300 is rendered instead of 350, 400 is rendered instead of 450, and so on. By contrast, the Typeface created with the new APIs dynamically creates a Font instance for a given weight, so accurate weights are rendered for 350, 450, 550, and 650 as well.

精細的換行符號控制項

Starting in Android 15, a TextView and the underlying line breaker can preserve the given portion of text in the same line to improve readability. You can take advantage of this line break customization by using the <nobreak> tag in string resources or createNoBreakSpan. Similarly, you can preserve words from hyphenation by using the <nohyphen> tag or createNoHyphenationSpan.

For example, the following string resource doesn't include a line break, and renders with the text "Pixel 8 Pro." breaking in an undesirable place:

<resources>
    <string name="pixel8pro">The power and brains behind Pixel 8 Pro.</string>
</resources>

In contrast, this string resource includes the <nobreak> tag, which wraps the phrase "Pixel 8 Pro." and prevents line breaks:

<resources>
    <string name="pixel8pro">The power and brains behind <nobreak>Pixel 8 Pro.</nobreak></string>
</resources>

The difference in how these strings are rendered is shown in the following images:

Layout for a line of text where the phrase "Pixel 8 Pro." isn't wrapped using a <nobreak> tag.

Layout for the same line of text where the phrase "Pixel 8 Pro." is wrapped using a <nobreak> tag.

應用程式封存

Android 和 Google Play 去年宣布支援應用程式封存功能，使用者可以在 Google Play 上使用 Android App Bundle 發布的應用程式，從裝置上部分移除不常使用的應用程式，藉此釋出空間。Android 15 提供應用程式封存和解封存的作業系統層級支援功能，讓所有應用程式商店更輕鬆地實作這項功能。

具有 REQUEST_DELETE_PACKAGES 權限的應用程式可以呼叫 PackageInstaller requestArchive 方法，要求封存 已安裝的應用程式套件，會移除 APK 和任何快取檔案，但會保留 使用者資料。系統會透過 LauncherApps API；使用者會看到 UI 樣式，藉此突顯這些 個應用程式已封存。使用者輕觸封存的應用程式時，負責的安裝程式 會收到取消封存的要求，而且還原程序可以 由 ACTION_PACKAGE_ADDED 廣播監控。

圖像

Android 15 提供最新的圖形改善功能，包括 ANGLE 和 Canvas 圖形系統新增功能。

翻新 Android 的 GPU 存取方式

Android hardware has evolved quite a bit from the early days where the core OS would run on a single CPU and GPUs were accessed using APIs based on fixed-function pipelines. The Vulkan® graphics API has been available in the NDK since Android 7.0 (API level 24) with a lower-level abstraction that better reflects modern GPU hardware, scales better to support multiple CPU cores, and offers reduced CPU driver overhead — leading to improved app performance. Vulkan is supported by all modern game engines.

Vulkan is Android's preferred interface to the GPU. Therefore, Android 15 includes ANGLE as an optional layer for running OpenGL® ES on top of Vulkan. Moving to ANGLE will standardize the Android OpenGL implementation for improved compatibility, and, in some cases, improved performance. You can test out your OpenGL ES app stability and performance with ANGLE by enabling the developer option in Settings -> System -> Developer Options -> Experimental: Enable ANGLE on Android 15.

The Android ANGLE on Vulkan roadmap

As part of streamlining our GPU stack, going forward we will be shipping ANGLE as the GL system driver on more new devices, with the future expectation that OpenGL/ES will be only available through ANGLE. That being said, we plan to continue support for OpenGL ES on all devices.

Recommended next steps

Use the developer options to select the ANGLE driver for OpenGL ES and test your app. For new projects, we strongly encourage using Vulkan for C/C++.

改善 Canvas

Android 15 continues our modernization of Android's Canvas graphics system with additional capabilities:

• Matrix44 provides a 4x4 matrix for transforming coordinates that should be used when you want to manipulate the canvas in 3D.
• clipShader intersects the current clip with the specified shader, while clipOutShader sets the clip to the difference of the current clip and the shader, each treating the shader as an alpha mask. This supports the drawing of complex shapes efficiently.

效能與電池

Android 會繼續致力協助您提升應用程式的效能和品質。Android 15 導入了新的 API，可協助您更有效率地執行應用程式工作、最佳化應用程式效能，以及收集應用程式深入分析資訊。

如要瞭解節約耗電量的最佳做法、對網路和耗電量進行偵錯，以及我們如何改善 Android 15 和新版 Android 中背景工作的電池效能，請參閱 Google I/O 大會的「改善 Android 上背景工作的電池效能」。

應用程式啟動資訊 API

In previous versions of Android, app startup has been a bit of a mystery. It was challenging to determine within your app whether it started from a cold, warm, or hot state. It was also difficult to know how long your app spent during the various launch phases: forking the process, calling onCreate, drawing the first frame, and more. When your Application class was instantiated, you had no way of knowing whether the app started from a broadcast, a content provider, a job, a backup, boot complete, an alarm, or an Activity.

The ApplicationStartInfo API on Android 15 provides all of this and more. You can even choose to add your own timestamps into the flow to help collect timing data in one place. In addition to collecting metrics, you can use ApplicationStartInfo to help directly optimize app startup; for example, you can eliminate the costly instantiation of UI-related libraries within your Application class when your app is starting up due to a broadcast.

詳細應用程式大小資訊

Since Android 8.0 (API level 26), Android has included the StorageStats.getAppBytes API that summarizes the installed size of an app as a single number of bytes, which is a sum of the APK size, the size of files extracted from the APK, and files that were generated on the device such as ahead-of-time (AOT) compiled code. This number is not very insightful in terms of how your app is using storage.

Android 15 adds the StorageStats.getAppBytesByDataType([type]) API, which lets you get insight into how your app is using up all that space, including APK file splits, AOT and speedup related code, dex metadata, libraries, and guided profiles.

應用程式代管剖析

Android 15 includes the ProfilingManager class, which lets you collect profiling information from within your app such as heap dumps, heap profiles, stack sampling, and more. It provides a callback to your app with a supplied tag to identify the output file, which is delivered to your app's files directory. The API does rate limiting to minimize the performance impact.

To simplify constructing profiling requests in your app, we recommend using the corresponding Profiling AndroidX API, available in Core 1.15.0-rc01 or higher.

改善 SQLite 資料庫

Android 15 推出 SQLite API，可公開基礎 SQLite 引擎的進階功能，針對應用程式可能出現的特定效能問題進行調整。這些 API 已隨 SQLite 更新至 3.44.3 版一併提供。

開發人員應參考提升 SQLite 效能的最佳做法 充分運用 SQLite 資料庫，尤其是處理大型資料集時 或執行容易受到延遲時間影響的查詢時

• 唯讀延遲交易：在發出唯讀交易 (不包含寫入陳述式) 時，請使用 beginTransactionReadOnly() 和 beginTransactionWithListenerReadOnly(SQLiteTransactionListener) 發出唯讀 DEFERRED 交易。這類交易可以同時執行，如果資料庫處於 WAL 模式，則可以與 IMMEDIATE 或 EXCLUSIVE 交易同時執行。
• 資料列計數與 ID：新增了 API 以擷取已變更的計數 資料列或上次插入的資料列 ID，且無須發出額外查詢。 getLastChangedRowCount() 會傳回資料列數量 最新的 SQL 陳述式已插入、更新或刪除 目前交易，而 getTotalChangedRowCount() 會傳回目前連線的計數。 getLastInsertRowId() 會傳回要在目前連線中插入的最後一列的 rowid。
• 原始陳述式：發布原始 SQlite 陳述式，略過便利性 以及可能會產生的任何額外處理負擔。

Android 動態效能架構更新

Android 15 持續投資於 Android 動態效能架構 (ADPF)，這是一組 API，可讓遊戲和效能密集的應用程式直接與 Android 裝置的電源和熱能系統互動。在支援的裝置上，Android 15 會新增 ADPF 功能：

• 提示工作階段的「省電模式」，用來表示相關聯的執行緒偏好省電而非效能，非常適合用於長時間執行的背景工作負載。
• 無論是在提示工作階段中，都能回報 GPU 和 CPU 工作持續時間，讓系統據此調整 CPU 和 GPU 頻率，以滿足工作負載需求。
• 熱力上升門檻：根據進步空間預測結果解釋可能的熱節保護狀態。

如要進一步瞭解如何在應用程式和遊戲中使用 ADPF，請參閱說明文件。

隱私權

Android 15 提供多項功能，可協助應用程式開發人員保護使用者隱私。

螢幕錄影偵測

Android 15 adds support for apps to detect that they are being recorded. A callback is invoked whenever the app transitions between being visible or invisible within a screen recording. An app is considered visible if activities owned by the registering process's UID are being recorded. This way, if your app is performing a sensitive operation, you can inform the user that they're being recorded.

val mCallback = Consumer<Int> { state ->
  if (state == SCREEN_RECORDING_STATE_VISIBLE) {
    // We're being recorded
  } else {
    // We're not being recorded
  }
}

override fun onStart() {
   super.onStart()
   val initialState =
      windowManager.addScreenRecordingCallback(mainExecutor, mCallback)
   mCallback.accept(initialState)
}

override fun onStop() {
    super.onStop()
    windowManager.removeScreenRecordingCallback(mCallback)
}

擴充的 IntentFilter 功能

Android 15 builds in support for more precise Intent resolution through UriRelativeFilterGroup, which contains a set of UriRelativeFilter objects that form a set of Intent matching rules that must each be satisfied, including URL query parameters, URL fragments, and blocking or exclusion rules.

These rules can be defined in the AndroidManifest XML file with the <uri-relative-filter-group> tag, which can optionally include an android:allow tag. These tags can contain <data> tags that use existing data tag attributes as well as the android:query and android:fragment attributes.

Here's an example of the AndroidManifest syntax:

<intent-filter>
  <action android:name="android.intent.action.VIEW" />
  <category android:name="android.intent.category.BROWSABLE" />
  <category android:name="android.intent.category.DEFAULT" />
  <data android:scheme="http" />
  <data android:scheme="https" />
  <data android:domain="astore.com" />
  <uri-relative-filter-group>
    <data android:pathPrefix="/auth" />
    <data android:query="region=na" />
  </uri-relative-filter-group>
  <uri-relative-filter-group android:allow="false">
    <data android:pathPrefix="/auth" />
    <data android:query="mobileoptout=true" />
  </uri-relative-filter-group>
  <uri-relative-filter-group android:allow="false">
    <data android:pathPrefix="/auth" />
    <data android:fragmentPrefix="faq" />
  </uri-relative-filter-group>
</intent-filter>

私人空間

Private space lets users create a separate space on their device where they can keep sensitive apps away from prying eyes, under an additional layer of authentication. The private space uses a separate user profile. The user can choose to use the device lock or a separate lock factor for the private space.

Apps in the private space show up in a separate container in the launcher, and are hidden from the recents view, notifications, settings, and from other apps when the private space is locked. User-generated and downloaded content (such as media or files) and accounts are separated between the private space and the main space. The system sharesheet and the photo picker can be used to give apps access to content across spaces when the private space is unlocked.

Users can't move existing apps and their data into the private space. Instead, users select an install option in the private space to install an app using whichever app store they prefer. Apps in the private space are installed as separate copies from any apps in the main space (new copies of the same app).

When a user locks the private space, the profile is stopped. While the profile is stopped, apps in the private space are no longer active and can't perform foreground or background activities, including showing notifications.

We recommend that you test your app with private space to make sure your app works as expected, especially if your app falls into one of the following categories:

• Apps with logic for work profiles that assumes that any installed copies of their app that aren't in the main profile are in the work profile.
• Medical apps
• Launcher apps
• App store apps

查詢最近所選相片存取權的使用者選項

Apps can now highlight only the most-recently-selected photos and videos when partial access to media permissions is granted. This feature can improve the user experience for apps that frequently request access to photos and videos. To use this feature in your app, enable the QUERY_ARG_LATEST_SELECTION_ONLY argument when querying MediaStore through ContentResolver.

val externalContentUri = MediaStore.Files.getContentUri("external")

val mediaColumns = arrayOf(
   FileColumns._ID,
   FileColumns.DISPLAY_NAME,
   FileColumns.MIME_TYPE,
)

val queryArgs = bundleOf(
   // Return only items from the last selection (selected photos access)
   QUERY_ARG_LATEST_SELECTION_ONLY to true,
   // Sort returned items chronologically based on when they were added to the device's storage
   QUERY_ARG_SQL_SORT_ORDER to "${FileColumns.DATE_ADDED} DESC",
   QUERY_ARG_SQL_SELECTION to "${FileColumns.MEDIA_TYPE} = ? OR ${FileColumns.MEDIA_TYPE} = ?",
   QUERY_ARG_SQL_SELECTION_ARGS to arrayOf(
       FileColumns.MEDIA_TYPE_IMAGE.toString(),
       FileColumns.MEDIA_TYPE_VIDEO.toString()
   )
)

Uri externalContentUri = MediaStore.Files.getContentUri("external");

String[] mediaColumns = {
    FileColumns._ID,
    FileColumns.DISPLAY_NAME,
    FileColumns.MIME_TYPE
};

Bundle queryArgs = new Bundle();
queryArgs.putBoolean(MediaStore.QUERY_ARG_LATEST_SELECTION_ONLY, true);
queryArgs.putString(MediaStore.QUERY_ARG_SQL_SORT_ORDER, FileColumns.DATE_ADDED + " DESC");
queryArgs.putString(MediaStore.QUERY_ARG_SQL_SELECTION, FileColumns.MEDIA_TYPE + " = ? OR " + FileColumns.MEDIA_TYPE + " = ?");
queryArgs.putStringArray(MediaStore.QUERY_ARG_SQL_SELECTION_ARGS, new String[] {
    String.valueOf(FileColumns.MEDIA_TYPE_IMAGE),
    String.valueOf(FileColumns.MEDIA_TYPE_VIDEO)
});

Android 版 Privacy Sandbox

Android 15 includes the latest Android Ad Services extensions, incorporating the latest version of the Privacy Sandbox on Android. This addition is part of our work to develop technologies that improve user privacy and enable effective, personalized advertising experiences for mobile apps. Our privacy sandbox page has more information about the Privacy Sandbox on Android developer preview and beta programs to help you get started.

Health Connect

Android 15 integrates the latest extensions around Health Connect by Android, a secure and centralized platform to manage and share app-collected health and fitness data. This update adds support for additional data types across fitness, nutrition, skin temperature, training plans, and more.

Skin temperature tracking allows users to store and share more accurate temperature data from a wearable or other tracking device.

Training plans are structured workout plans to help a user achieve their fitness goals. Training plans support includes a variety of completion and performance goals:

• Completion goals around calories burned, distance, duration, repetition, and steps.
• Performance goals around as many repetitions as possible (AMRAP), cadence, heart rate, power, perceived rate of exertion, and speed.

Learn more about the latest updates to Health Connect in Android in the Building adaptable experiences with Android Health talk from Google I/O.

分享局部螢幕畫面

Android 15 支援部分螢幕分享功能，因此使用者可以分享或錄製單一應用程式視窗，而非整個裝置畫面。這項功能最早在 Android 14 QPR2 中啟用，其中包含 MediaProjection 回呼，可讓應用程式自訂部分螢幕分享體驗。請注意，如要指定應用程式 Android 14 (API 級別 34) 以上版本， 必須徵得使用者同意 MediaProjection 擷取工作階段。

使用者體驗和系統 UI

Android 15 可讓應用程式開發人員和使用者更靈活地控管及設定裝置，以符合自身需求。

如要進一步瞭解如何使用 Android 15 的最新改善功能來改善應用程式的使用者體驗，請參閱 Google I/O 大會的改善 Android 應用程式的使用者體驗。

使用 Generated Previews API，讓小工具預覽更豐富

在 Android 15 之前，您只能指定 靜態圖片或版面配置資源。這些預覽畫面通常與實際小工具放置在主畫面時的外觀大不相同。此外，您無法使用 Jetpack Glance 建立靜態資源，因此 Glance 開發人員必須截取小工具的螢幕截圖，或建立 XML 版面配置，才能預覽小工具。

Android 15 開始支援產生的預覽畫面。這表示應用程式小工具供應者可以產生 RemoteViews，用於取用器預覽畫面，而非靜態資源。

推送 API

應用程式可以透過推送 API 提供產生的預覽畫面。應用程式可以在生命週期的任何時間點提供預覽畫面，且不會收到來自主機的明確要求，要求提供預覽畫面。預覽會保存在 AppWidgetService 中。 主機則可隨選要求叢集以下範例會載入 XML 小工具 版面配置資源並將其設為預覽：

AppWidgetManager.getInstance(appContext).setWidgetPreview(
   ComponentName(
       appContext,
       SociaLiteAppWidgetReceiver::class.java
   ),
   AppWidgetProviderInfo.WIDGET_CATEGORY_HOME_SCREEN,
   RemoteViews("com.example", R.layout.widget_preview)
)

預期的流程如下：

1. 小工具提供者隨時都會呼叫 setWidgetPreview。提供的 預覽內容會連同其他供應商資訊保留在 AppWidgetService 中。
2. setWidgetPreview 會透過 AppWidgetHost.onProvidersChanged 回呼通知主機已更新的預覽畫面。做為回應 主機重新載入所有供應商資訊。
3. 在顯示小工具預覽畫面時，主機會檢查 AppWidgetProviderInfo.generatedPreviewCategories，以及 類別可供使用，呼叫 AppWidgetManager.getWidgetPreview 到 會傳回這個供應商的儲存預覽畫面。

何時呼叫 setWidgetPreview

由於沒有回呼可提供預覽畫面，應用程式可以在執行期間隨時選擇傳送預覽畫面。預覽畫面的更新頻率取決於小工具的用途。

以下清單說明預先發布版用途的兩大類別：

• 供應商在小工具預覽畫面中顯示實際資料，例如個人化資料 或最新資訊這些供應商可在使用者登入或在應用程式中完成初始設定後，設定預覽畫面。之後，他們可以設定定期執行的作業，以所選頻率更新預覽畫面。例如相片、日曆、天氣或新聞
• 在預覽畫面中顯示靜態資訊，或在快速操作小工具中不顯示任何資料的供應商。這些供應商可以在應用程式首次啟動時設定預覽畫面。例如快速開車 動作小工具或 Chrome 捷徑小工具

部分供應商可能會在中心模式挑選器中顯示靜態預覽畫面，但實際上 主畫面上挑選器的資訊。這些供應商應依照這兩種用途設定預覽畫面。

子母畫面

Android 15 introduces changes in Picture-in-Picture (PiP) ensuring an even smoother transition when entering into PiP mode. This will be beneficial for apps having UI elements overlaid on top of their main UI, which goes into PiP.

Developers use the onPictureInPictureModeChanged callback to define logic that toggles the visibility of the overlaid UI elements. This callback is triggered when the PiP enter or exit animation is completed. Beginning in Android 15, the PictureInPictureUiState class includes another state.

With this UI state, apps targeting Android 15 (API level 35) will observe the Activity#onPictureInPictureUiStateChanged callback being invoked with isTransitioningToPip() as soon as the PiP animation starts. There are many UI elements that are not relevant for the app when it is in PiP mode, for example views or layout that include information such as suggestions, upcoming video, ratings, and titles. When the app goes to PiP mode, use the onPictureInPictureUiStateChanged callback to hide these UI elements. When the app goes to full screen mode from the PiP window, use onPictureInPictureModeChanged callback to unhide these elements, as shown in the following examples:

override fun onPictureInPictureUiStateChanged(pipState: PictureInPictureUiState) {
        if (pipState.isTransitioningToPip()) {
          // Hide UI elements
        }
    }

override fun onPictureInPictureModeChanged(isInPictureInPictureMode: Boolean) {
        if (isInPictureInPictureMode) {
          // Unhide UI elements
        }
    }

This quick visibility toggle of irrelevant UI elements (for a PiP window) helps ensure a smoother and flicker-free PiP enter animation.

改善「零打擾」規則

AutomaticZenRule lets apps customize Attention Management (Do Not Disturb) rules and decide when to activate or deactivate them. Android 15 greatly enhances these rules with the goal of improving the user experience. The following enhancements are included:

• Adding types to AutomaticZenRule, allowing the system to apply special treatment to some rules.
• Adding an icon to AutomaticZenRule, helping to make the modes be more recognizable.
• Adding a triggerDescription string to AutomaticZenRule that describes the conditions on which the rule should become active for the user.
• Added ZenDeviceEffects to AutomaticZenRule, allowing rules to trigger things like grayscale display, night mode, or dimming the wallpaper.

為通知管道設定 VibrationEffect

Android 15 支援使用 NotificationChannel.setVibrationEffect 為特定管道設定豐富的震動效果，讓使用者不必查看裝置，就能區分不同類型的通知。

大螢幕與板型規格

Android 15 可讓應用程式充分運用 Android 板型規格，包括大螢幕、折疊式裝置和折疊式裝置。

改善大螢幕多工處理效能

Android 15 gives users better ways to multitask on large screen devices. For example, users can save their favorite split-screen app combinations for quick access and pin the taskbar on screen to quickly switch between apps. This means that making sure your app is adaptive is more important than ever.

Google I/O has sessions on Building adaptive Android apps and Building UI with the Material 3 adaptive library that can help, and our documentation has more to help you Design for large screens.

遮蔽螢幕支援

Your app can declare a property that Android 15 uses to allow your Application or Activity to be presented on the small cover screens of supported flippable devices. These screens are too small to be considered as compatible targets for Android apps to run on, but your app can opt in to supporting them, making your app available in more places.

連線能力

Android 15 會更新平台，讓應用程式存取通訊和無線技術的最新進展。

衛星支援

Android 15 continues to extend platform support for satellite connectivity and includes some UI elements to ensure a consistent user experience across the satellite connectivity landscape.

Apps can use ServiceState.isUsingNonTerrestrialNetwork() to detect when a device is connected to a satellite, giving them more awareness of why full network services might be unavailable. Additionally, Android 15 provides support for SMS and MMS apps as well as preloaded RCS apps to use satellite connectivity for sending and receiving messages.

更順暢的 NFC 體驗

Android 15 is working to make the tap to pay experience more seamless and reliable while continuing to support Android's robust NFC app ecosystem. On supported devices, apps can request the NfcAdapter to enter observe mode, where the device listens but doesn't respond to NFC readers, sending the app's NFC service PollingFrame objects to process. The PollingFrame objects can be used to auth ahead of the first communication to the NFC reader, allowing for a one tap transaction in many cases.

In addition, apps can register a filter on supported devices so they can be notified of polling loop activity, which allows for smooth operation with multiple NFC-aware applications.

錢包角色

Android 15 導入了新的錢包角色，可更緊密地與使用者偏好的錢包應用程式整合。這個角色會取代 NFC 預設的感應支付設定。使用者可以依序前往「設定」>「應用程式」>「預設應用程式」，管理錢包角色持有人。

針對付款類別中註冊的 AID 進行 NFC 感應支付時，系統會使用「錢包」角色。除非在前景中執行註冊相同 AID 的另一個應用程式，否則感應功能會一律傳送至錢包角色持有者。

這個角色也能用來判斷在啟用錢包 QuickAccess 圖塊後應前往的位置。將角色設為「None」時，則無法使用 QuickAccess 設定方塊，且付款類別的 NFC 輕觸動作只會傳送至前景應用程式。

安全性

Android 15 可協助您提升應用程式安全性、保護應用程式資料，並讓使用者進一步掌握及控管自己的資料。請參閱 Google I/O 的「保護 Android 使用者安全」的演講，瞭解我們採取哪些措施來改善使用者保護措施，以及保護應用程式免受新的威脅。

將 Credential Manager 與自動填入功能整合

Starting with Android 15, developers can link specific views like username or password fields with Credential Manager requests, making it easier to provide a tailored user experience during the sign-in process. When the user focuses on one of these views, a corresponding request is sent to Credential Manager. The resulting credentials are aggregated across providers and displayed in autofill fallback UIs, such as inline suggestions or drop-down suggestions. The Jetpack androidx.credentials library is the preferred endpoint for developers to use and will soon be available to further enhance this feature in Android 15 and higher.

整合輕觸註冊與登入功能和生物特徵辨識提示

Credential Manager 會將生物特徵辨識提示訊息整合至憑證建立和登入程序，因此提供者不必管理生物特徵辨識提示訊息。因此，憑證提供者只需要專注於 建立和取得流量的結果，並透過生物特徵辨識流程結果增強。 這個簡化程序可建立更有效率且精簡的憑證建立和擷取程序。

端對端加密金鑰管理服務

We are introducing the E2eeContactKeysManager in Android 15, which facilitates end-to-end encryption (E2EE) in your Android apps by providing an OS-level API for the storage of cryptographic public keys.

The E2eeContactKeysManager is designed to integrate with the platform contacts app to give users a centralized way to manage and verify their contacts' public keys.

內容 URI 的權限檢查

Android 15 導入了一組新的 API，可對內容 URI 執行權限檢查：

• Context.checkContentUriPermissionFull：這會對內容 URI 執行完整權限檢查。
• Activity 資訊清單屬性 requireContentUriPermissionFromCaller：這會在活動啟動時對提供的內容 URI 強制執行指定權限。
• Activity 呼叫端的 ComponentCaller 類別：代表啟動活動的應用程式。

無障礙功能

Android 15 新增了多項功能，為使用者改善無障礙功能。

改善點字

在 Android 15 中，我們讓 TalkBack 能夠支援透過 USB 和安全藍牙採用 HID 標準的點字顯示器。

如同滑鼠和鍵盤所使用的標準，Android 日後將支援更多點字顯示器。

國際化

Android 15 新增了各種功能，可滿足以不同語言使用裝置時的使用者體驗。

CJK 變數字型

Starting with Android 15, the font file for Chinese, Japanese, and Korean (CJK) languages, NotoSansCJK, is now a variable font. Variable fonts open up possibilities for creative typography in CJK languages. Designers can explore a broader range of styles and create visually striking layouts that were previously difficult or impossible to achieve.

跨字元理由

Starting with Android 15, text can be justified utilizing letter spacing by using JUSTIFICATION_MODE_INTER_CHARACTER. Inter-word justification was first introduced in Android 8.0 (API level 26), and inter-character justification provides similar capabilities for languages that use the whitespace character for segmentation, such as Chinese, Japanese, and others.

Layout for Japanese text using JUSTIFICATION_MODE_NONE.

Layout for English text using JUSTIFICATION_MODE_NONE.

Layout for Japanese text using JUSTIFICATION_MODE_INTER_WORD.

Layout for English text using JUSTIFICATION_MODE_INTER_WORD.

Layout for Japanese text using the JUSTIFICATION_MODE_INTER_CHARACTER.

Layout for English text using the JUSTIFICATION_MODE_INTER_CHARACTER.

自動換行設定

Android started supporting phrase-based line breaks for Japanese and Korean in Android 13 (API level 33). However, while phrase-based line breaks improve the readability of short lines of text, they don't work well for long lines of text. In Android 15, apps can apply phrase-based line breaks only for short lines of text, using the LINE_BREAK_WORD_STYLE_AUTO option. This option selects the best word style option for the text.

For short lines of text, phrase-based line breaks are used, functioning the same as LINE_BREAK_WORD_STYLE_PHRASE, as shown in the following image:

For longer lines of text, LINE_BREAK_WORD_STYLE_AUTO uses a no line-break word style, functioning the same as LINE_BREAK_WORD_STYLE_NONE, as shown in the following image:

新日本亨塔加納字型

In Android 15, a font file for old Japanese Hiragana (known as Hentaigana) is bundled by default. The unique shapes of Hentaigana characters can add a distinctive flair to artwork or design while also helping to preserve accurate transmission and understanding of ancient Japanese documents.

VideoLAN cone Copyright (c) 1996-2010 VideoLAN，任何人都可以使用或修改此標誌或修改後的版本，以參照 VideoLAN 專案或 VideoLAN 團隊開發的任何產品，但不代表專案背書。

Vulkan 和 Vulkan 標誌是 Khronos Group Inc.的註冊商標。

OpenGL 是註冊商標，OpenGL ES 標誌是 Khronos 許可使用的 Hewlett Packard Enterprise 商標。