MotionController

Artifact: androidx.constraintlayout:constraintlayout

Kotlin |Java

class MotionController

Contains the picture of a view through a transition and is used to interpolate it. During an transition every view has a MotionController which drives its position.

All parameter which affect a views motion are added to MotionController and then setup() builds out the splines that control the view.

Summary

Constants
`const Int`	`DRAW_PATH_AS_CONFIGURED = 4`
`const Int`	`DRAW_PATH_BASIC = 1`
`const Int`	`DRAW_PATH_CARTESIAN = 3`
`const Int`	`DRAW_PATH_NONE = 0`
`const Int`	`DRAW_PATH_RECTANGLE = 5`
`const Int`	`DRAW_PATH_RELATIVE = 2`
`const Int`	`DRAW_PATH_SCREEN = 6`
`const Int`	`HORIZONTAL_PATH_X = 2`
`const Int`	`HORIZONTAL_PATH_Y = 3`
`const Int`	`PATH_PERCENT = 0`
`const Int`	`PATH_PERPENDICULAR = 1`
`const Int`	`ROTATION_LEFT = 2`
`const Int`	`ROTATION_RIGHT = 1`
`const Int`	`VERTICAL_PATH_X = 4`
`const Int`	`VERTICAL_PATH_Y = 5`

Public functions
`Unit`	`addKey(key: Key!)` Add a key to the MotionController
`Int`	`getAnimateRelativeTo()` Will return the id of the view to move relative to.
`Unit`	`getCenter(p: Double, pos: FloatArray!, vel: FloatArray!)` Get a center and velocities at the position p
`Float`	`getCenterX()` Get the center X of the motion at the current progress
`Float`	`getCenterY()` Get the center Y of the motion at the current progress
`Int`	`getDrawPath()` returns the draw path mode
`Float`	`getFinalHeight()` get the width of the widget at the end of the movement.
`Float`	`getFinalWidth()` get the width of the widget at the end of the movement.
`Float`	`getFinalX()` get the left most position of the widget at the end of the movement.
`Float`	`getFinalY()` get the top most position of the widget at the end of the movement.
`Int`	`getKeyFrameInfo(type: Int, info: IntArray!)` Get the keyFrames for the view controlled by this MotionController. the info data structure is of the form 0 length if your are at index i the [i+len+1] is the next entry 1 type 1=Attributes, 2=Position, 3=TimeCycle 4=Cycle 5=Trigger 2 position 3 x location 4 y location 5 ... length
`Int`	`getKeyFramePositions(type: IntArray!, pos: FloatArray!)` Get the keyFrames for the view controlled by this MotionController
`Float`	`getStartHeight()` get the width of the widget at the start of the movement.
`Float`	`getStartWidth()` get the width of the widget at the start of the movement.
`Float`	`getStartX()` get the left most position of the widget at the start of the movement.
`Float`	`getStartY()` get the top most position of the widget at the start of the movement.
`Int`	`getTransformPivotTarget()` Get the view to pivot around
`View!`	`getView()` Get the view that is being controlled
`Unit`	`remeasure()` During the next layout call measure then layout
`Unit`	`setDrawPath(debugMode: Int)`
`Unit`	`setPathMotionArc(arc: Int)`
`Unit`	`setStartState( rect: ViewState!, v: View!, rotation: Int, preWidth: Int, preHeight: Int )` configure the position of the view
`Unit`	`setTransformPivotTarget(transformPivotTarget: Int)` Set a view to pivot around
`Unit`	`setView(view: View!)`
`Unit`	`setup( parentWidth: Int, parentHeight: Int, transitionDuration: Float, currentTime: Long )` Called after all TimePoints &Cycles have been added; Spines are evaluated
`Unit`	`setupRelative(motionController: MotionController!)` This ties one motionController to another to allow relative pathes
`String!`	`toString()` Debug string

Constants

DRAW_PATH_AS_CONFIGURED

Added in 2.2.0-rc01

const val DRAW_PATH_AS_CONFIGURED = 4: Int

DRAW_PATH_BASIC

Added in 2.2.0-rc01

const val DRAW_PATH_BASIC = 1: Int

DRAW_PATH_CARTESIAN

Added in 2.2.0-rc01

const val DRAW_PATH_CARTESIAN = 3: Int

DRAW_PATH_NONE

Added in 2.2.0-rc01

const val DRAW_PATH_NONE = 0: Int

DRAW_PATH_RECTANGLE

Added in 2.2.0-rc01

const val DRAW_PATH_RECTANGLE = 5: Int

DRAW_PATH_RELATIVE

Added in 2.2.0-rc01

const val DRAW_PATH_RELATIVE = 2: Int

DRAW_PATH_SCREEN

Added in 2.2.0-rc01

const val DRAW_PATH_SCREEN = 6: Int

HORIZONTAL_PATH_X

Added in 2.2.0-rc01

const val HORIZONTAL_PATH_X = 2: Int

HORIZONTAL_PATH_Y

Added in 2.2.0-rc01

const val HORIZONTAL_PATH_Y = 3: Int

PATH_PERCENT

Added in 2.2.0-rc01

const val PATH_PERCENT = 0: Int

PATH_PERPENDICULAR

Added in 2.2.0-rc01

const val PATH_PERPENDICULAR = 1: Int

ROTATION_LEFT

Added in 2.2.0-rc01

const val ROTATION_LEFT = 2: Int

ROTATION_RIGHT

Added in 2.2.0-rc01

const val ROTATION_RIGHT = 1: Int

VERTICAL_PATH_X

Added in 2.2.0-rc01

const val VERTICAL_PATH_X = 4: Int

VERTICAL_PATH_Y

Added in 2.2.0-rc01

const val VERTICAL_PATH_Y = 5: Int

Public functions

Added in 2.2.0-rc01

fun addKey(key: Key!): Unit

Add a key to the MotionController

Parameters
`key: Key!`

getAnimateRelativeTo

Added in 2.2.0-rc01

fun getAnimateRelativeTo(): Int

Will return the id of the view to move relative to. The position at the start and then end will be viewed relative to this view -1 is the return value if NOT in polar mode

Returns
`Int`	the view id of the view this is in polar mode to or -1 if not in polar

getCenter

Added in 2.2.0-rc01

fun getCenter(p: Double, pos: FloatArray!, vel: FloatArray!): Unit

Get a center and velocities at the position p

Parameters
`p: Double`
`pos: FloatArray!`
`vel: FloatArray!`

getCenterX

Added in 2.2.0-rc01

fun getCenterX(): Float

Get the center X of the motion at the current progress

Returns
`Float`

getCenterY

Added in 2.2.0-rc01

fun getCenterY(): Float

Get the center Y of the motion at the current progress

Returns
`Float`

getDrawPath

Added in 2.2.0-rc01

fun getDrawPath(): Int

returns the draw path mode

Returns
`Int`

getFinalHeight

Added in 2.2.0-rc01

fun getFinalHeight(): Float

get the width of the widget at the end of the movement.

Returns
`Float`	the height at the end

getFinalWidth

Added in 2.2.0-rc01

fun getFinalWidth(): Float

get the width of the widget at the end of the movement.

Returns
`Float`	the width at the end

getFinalX

Added in 2.2.0-rc01

fun getFinalX(): Float

get the left most position of the widget at the end of the movement.

Returns
`Float`	the left most position

getFinalY

Added in 2.2.0-rc01

fun getFinalY(): Float

get the top most position of the widget at the end of the movement. Positive is down.

Returns
`Float`	the top most position

getKeyFrameInfo

Added in 2.2.0-rc01

fun getKeyFrameInfo(type: Int, info: IntArray!): Int

Get the keyFrames for the view controlled by this MotionController. the info data structure is of the form 0 length if your are at index i the [i+len+1] is the next entry 1 type 1=Attributes, 2=Position, 3=TimeCycle 4=Cycle 5=Trigger 2 position 3 x location 4 y location 5 ... length

Parameters
`info: IntArray!`	is a data structure array of int that holds info on each keyframe

Returns
`Int`	Number of keyFrames found

getKeyFramePositions

Added in 2.2.0-rc01

fun getKeyFramePositions(type: IntArray!, pos: FloatArray!): Int

Get the keyFrames for the view controlled by this MotionController

Parameters
`type: IntArray!`	is position(0-100) + 1000*mType(1=Attr, 2=Pos, 3=TimeCycle 4=Cycle 5=Trigger
`pos: FloatArray!`	the x&y position of the keyFrame along the path

Returns
`Int`	Number of keyFrames found

getStartHeight

Added in 2.2.0-rc01

fun getStartHeight(): Float

get the width of the widget at the start of the movement.

Returns
`Float`	the height at the start

getStartWidth

Added in 2.2.0-rc01

fun getStartWidth(): Float

get the width of the widget at the start of the movement.

Returns
`Float`	the width at the start

getStartX

Added in 2.2.0-rc01

fun getStartX(): Float

get the left most position of the widget at the start of the movement.

Returns
`Float`	the left most position

getStartY

Added in 2.2.0-rc01

fun getStartY(): Float

get the top most position of the widget at the start of the movement. Positive is down.

Returns
`Float`	the top most position

getTransformPivotTarget

Added in 2.2.0-rc01

fun getTransformPivotTarget(): Int

Get the view to pivot around

Returns
`Int`	id of view or UNSET if not set

getView

Added in 2.2.0-rc01

fun getView(): View!

Get the view that is being controlled

Returns
`View!`

remeasure

Added in 2.2.0-rc01

fun remeasure(): Unit

During the next layout call measure then layout

setDrawPath

Added in 2.2.0-rc01

fun setDrawPath(debugMode: Int): Unit

setPathMotionArc

Added in 2.2.0-rc01

fun setPathMotionArc(arc: Int): Unit

setStartState

Added in 2.2.0-rc01

fun setStartState(
    rect: ViewState!,
    v: View!,
    rotation: Int,
    preWidth: Int,
    preHeight: Int
): Unit

configure the position of the view

Parameters
`rect: ViewState!`
`v: View!`
`rotation: Int`
`preWidth: Int`
`preHeight: Int`

setTransformPivotTarget

Added in 2.2.0-rc01

fun setTransformPivotTarget(transformPivotTarget: Int): Unit

Set a view to pivot around

Parameters
`transformPivotTarget: Int`	id of view

setView

Added in 2.2.0-rc01

fun setView(view: View!): Unit

Parameters
`view: View!`

setup

Added in 2.2.0-rc01

fun setup(
    parentWidth: Int,
    parentHeight: Int,
    transitionDuration: Float,
    currentTime: Long
): Unit

Called after all TimePoints &Cycles have been added; Spines are evaluated

Added in 2.2.0-rc01

fun setupRelative(motionController: MotionController!): Unit

This ties one motionController to another to allow relative pathes

Parameters
`motionController: MotionController!`

toString

fun toString(): String!

Debug string

Returns
`String!`