Embedarium by SDD Labs
English Türkçe

Cloud IDE · SPICE · PCB designer

Circuits, microcontrollers and PCBs — in the browser.

Design circuits and analyze them with SPICE, build firmware in the browser (8051 family) or on the server (AVR, Arm Cortex-M0+, PIC), simulate nine microcontroller targets instruction by instruction with cycle counting, and teach embedded systems with automatic grading.

  • No installation — runs in the browser
  • English and Turkish interface
  • On-premises option by agreement
Code simulator: an 8051 assembly program in the editor, with the debugger’s registers, disassembly and SFR memory map
Code simulator with the 8051 example “Square wave — Timer 0 mode 2”, paused in the debugger.
Simulated targets: 8051 family, AVR, Cortex-M0+, PIC
9
Catalog examples with recorded execution traces
91
Reference simulators cross-checked: uCsim, simavr, QEMU, gpsim
4
Copper layers with auto-routing and Gerber export
2 / 4

One platform

From schematic to firmware and PCB

One platform for schematic design, SPICE analysis, firmware development, microcontroller simulation and PCB layout with fabrication-file export.

SPICE circuit analysis

Draw the schematic in the browser and analyze it with SPICE: operating point, DC sweep, transient and AC (magnitude and phase) run on the server in an isolated worker, with no plugins. The live oscilloscope solves the circuit in the browser while the firmware runs.

  • Semiconductor models: Shockley diode, Ebers–Moll BJT and Shichman–Hodges MOSFET; results compared with ngspice in tests.
  • Net labels and ERC: connect distant terminals by name without drawing wires; the electrical rules check flags missing ground, shorts and unconnected pins.
  • AC and transient: AC magnitude and phase, DC operating point and sweeps, and transient responses.
More about circuit analysis
Schematic editor with an ATmega328P blink board: parts palette with the processor parts, net labels and the connection list

Who it is for

Built for engineering classrooms and hardware teams

Whether you teach a large first-year embedded systems course or prototype firmware and circuits for a product, Embedarium fits your workflow.

Hardware startups and R&D

Shorten the loop from firmware concept to PCB files: try firmware against simulated circuits before prototype boards arrive.

Enterprise and defense

On-premises installation by agreement, secrets encrypted at rest, two-factor authentication and an audit log.

Under the hood

How Embedarium is built

Simulation in the browser, isolated server-side toolchains and tenant isolation.

  1. Tier 1 · Client

    Angular single-page app

    Zoneless Angular with signals, the Monaco code editor and SVG schematic, PCB and waveform views.

  2. Tier 2 · In the browser

    Browser core

    SDCC compiled to WebAssembly and a built-in assembler for the 8051 family, and the microcontroller simulators (with cycle counting) running in Web Workers.

  3. Tier 3 · Server

    SPICE matrix engine

    Modified nodal analysis solver on the server: operating point, DC sweep, transient and AC, with diode, BJT and MOSFET models.

  4. Tier 4 · Sandbox

    Toolchain worker

    Isolated toolchain container running avr-gcc, arm-none-eabi-gcc and SDCC (PIC14) without access to application secrets.

Validation status

The emulators are checked against reference simulators (uCsim, simavr, QEMU and gpsim) in automated tests. No target has been validated on physical hardware yet; uploading to a board is in beta.

Hosted, or on your own servers

Use the hosted service at app.embedarium.com or, by agreement, run Embedarium with Docker Compose on your own Linux server: SDD Labs provides the installer and read access; daily backups and an isolated toolchain container are included.

FAQ

Frequently asked questions

Common questions about Embedarium and installation.

More answers in the user guide

Do I need to install software, drivers or compilers?

No installation is needed: Embedarium runs in a modern web browser. 8051-family code compiles in the browser (SDCC in WebAssembly); AVR, Arm Cortex-M0+ and PIC code compiles on the server in an isolated toolchain container. Simulation needs no drivers, local toolchains or USB adapters; only uploading to a physical board (ATmega328P with the Arduino bootloader, ADuC841 and MS51; beta) uses a USB-serial adapter and a Chromium-based browser.

How do students get accounts?

There is no public sign-up. We set up your institution; administrators invite staff, instructors enroll students in bulk by email, or students arrive from your LMS via LTI 1.3.

Which microcontroller architectures and targets are supported?

Nine device packages: classic 8051 and 8052, Nuvoton MS51PC0AE (1T 8051), Analog Devices ADuC841 (dual DAC, ADC with DMA), Microchip ATmega328P (the Arduino Uno processor), ATmega2560 (the Arduino Mega processor) and ATtiny85 (8-pin, PLL timer, USI), Arm Cortex-M0+ (CMSDK reference system) and Microchip PIC16F877A. Platform administrators (the Embedarium team, or your IT team on a self-hosted installation) can add variants of these cores as new targets.

Can our university host Embedarium on its own servers?

Yes, by agreement. SDD Labs gives your IT team the installer (install.sh) and read access to the code; Embedarium then runs with Docker Compose on your own Linux server, with daily backups and an isolated build container. HTTPS can be provided by Cloudflare or by your own front end.

How does automatic grading of code and circuits work?

Instructors define the checks: build success, UART test cases with input and expected output (hidden cases supported), waveform checks on pins (frequency, duty cycle, edges) and netlist rules for circuit assignments. Submissions are simulated in isolated workers and each check is scored by the weight the instructor gives it; rubrics are used for manual and hybrid grading.

Can I export PCB files for fabrication houses such as JLCPCB or PCBWay?

Yes. The export produces RS-274X Gerber layers with X2 file attributes (copper, solder mask, silkscreen, board outline), Excellon drill files, a Gerber job file, a bill of materials (BOM) in CSV and a pick-and-place (CPL) file in the column layout JLCPCB and PCBWay use. Gerber output is checked with gerbv; it has not yet been submitted to a fabricator.

Bring Embedarium to your course or team

We set up a pilot for your department or company: we create your organization and invite its owner, and your administrators and instructors invite everyone else.