Stere
The stere or stère (st) is a unit of volume in the original metric system equal to one cubic metre. The stere is typically used for measuring large quantities of firewood or other cut wood,[1] while the cubic meter is used for uncut wood.[2] The name was coined from the Greek στερεός stereós, "solid", in 1795 in France as a metric analogue to the cord. The unit was introduced to remove regional disparities of this former unit, for which the length could vary greatly from 6 to 13.5 m. It is not part of the modern metric system (SI) and is no longer a legal unit in France, but remains used in the commerce of firewood.
Background
[edit]The correspondence between stere and cubic meters of stacked wood is imprecise because it depends on the length of the logs used and on how irregular they are. The stere corresponds to 1 m3 (35.3 cu ft) of wood, made exclusively with logs of 1 m (3.3 ft) in length, all stacked parallel and neatly arranged. If the logs are less than 1 m, the volume of visible wood decreases because the voids are better occupied. Thus the "stere" no longer corresponds to 1 m3, but to 0.8 m3 (28.3 cu ft) for 50 cm (19.7 in) logs, 0.7 m3 (24.7 cu ft) for 33 cm (13.0 in) logs and 0.6 m3 (21.2 cu ft) for 25 cm (9.8 in) logs.
In Dutch and German, a closely related unit called kuub (Dutch), short for kubieke meter, or "Kubikmeter" (German) which differs from a stere. Whereas a "kuub" or "Kubikmeter" is a solid cubic metre, as it was traditionally used for wood, a stere (in German: Raummeter) is a cubic metre pile of woodblocks. A stere or Raummeter is less than a kuub or full cubic metre of wood, because the spaces between the woodblocks are included in a stere, while they do not count towards a kuub or Kubikmeter. In Finnish, the same unit is known as motti (from Swedish mått, "measure").
The stere as used in contexts outside the timber industry is not subject to the same ambiguity.[3] In particular, stere and kilostere are sometimes used in hydrology, as the kilostere (1,000 m3 (35,315 cu ft) or megalitre) is a slightly smaller metric analogue of an acre-foot (approximately 1,233 m3 (43,500 cu ft)), similar to the relationship of the metric tonne to the short ton.[4]
See also
[edit]References
[edit]- ^ Thierry Thomasset. "Le stère" (PDF). Tout sur les unités de mesure [All about the units of measure] (in French). Université de Technologie de Compiègne. Retrieved 21 March 2011.
- ^ For example:"Rough guide to calculating timber volumes" (PDF). Forestry Commission.
- ^ "kilostere". Webster. 1913.
- ^ McGee, W. J. (11 December 1915). "Principles of Water-Power Development" (PDF). Science. 34 (885): 813–825. doi:10.1126/science.34.885.813. PMID 17780383. S2CID 38160755. Archived from the original (PDF) on 27 October 2016.
You can help expand this article with text translated from the corresponding article in German. (May 2016) Click [show] for important translation instructions.
|
This standards- or measurement-related article is a stub. You can help Wikipedia by expanding it. |
This article about forestry is a stub. You can help Wikipedia by expanding it. |