SS Frank C. Ball

The freighter Frank C. Ball on a trial run
History
United States
Name	Frank C. Ball 1905-1931 J.R. Sensibar 1931-1981 Conallison 1981-1984
Operator	Globe Steamship Company 1906-1930 Construction Materials Corporation 1930-1931 Sensibar Transportation Company 1931-1936 Midwest Vessel Corporation 1936-1937 Construction Aggregates Company 1937-1941 Columbia Transportation Company 1941-1957 Oglebay Norton Corporation 1957-1981 Johnstone Shipping Ltd. 1981-1981 Westdale Shipping Ltd. 1981-1984
Port of registry	United States, Duluth, Minnesota 1905-1931 Gary, Indiana 1931-1939 Wilmington, Delaware 1936-1981 Toronto, Ontario 1981-1984
Builder	Great Lakes Engineering Works, Ecorse, Michigan
Yard number	14
Launched	December 9, 1905
In service	1906
Out of service	1984
Identification	U.S. Registry #202770 IMO number: 5166938
Fate	Scrapped in Avilés, Spain in 1984
General characteristics
Class and type	Bulk Freighter
Tonnage	6,909 gross 5,459 net
Length	550 ft (170 m) 1905-1961 611 ft (186 m) 1961-1984
Beam	56.2 ft (17.1 m)
Height	32 ft (9.8 m)
Installed power	2 x Scotch marine boilers
Propulsion	1,700 horsepower triple expansion steam engine attached to a single fixed pitch propeller
Speed	10 knots

The Frank C. Ball was an American Bulk carrier that was built by the Great Lakes Engineering Works of Ecorse, Michigan, for the Globe Steamship Company (managed by G. A. Tomlinson, Mgr.) of Duluth, Minnesota. She was launched on December 9, 1905, as hull #14. She was powered by a 1,700 horsepower triple expansion steam engine and fueled by two coal-fired Scotch marine boilers. Even though Ball was built in 1905, she only entered service in 1906.

The Ball when she was named J.R. Sensibar

In 1930 the Ball was sold to the Construction Materials Corporation of Chicago, Illinois. She was converted to a self-unloading sand dredge, and repowered by a steam powered Turbo-electric engine at American Shipbuilding Company of Lorain, Ohio. She was the first commercial vessel on the lakes to use this form of propulsion. Her original engine was installed in the Ford Motor Company's former barge, the Lake Frugality, when she was requisitioned for salt water service in World War II.

J.R. Sensibar

In 1931 the Ball was transferred to the Sensibar Transportation Company of Chicago, Illinois and renamed J.R. Sensibar. She was purchased to dredge the material for Chicago World's Fair. In 1936 the Sensibar was sold to the Midwest Vessel Corporation of Cleveland, Ohio where she served for only one year. In 1937 she was sold to the Construction Aggregates Company of Chicago, Illinois. In 1941 the Sensibar was sold to the Columbia Transportation Company of Cleveland, Ohio. She was converted to a self-unloading freighter that same year. In 1957 the fleet owned by Columbia Transportation Company merged with the Oglebay Norton Corporation. In 1960 the Sensibar had a new diesel engine installed, she also had her cargo hatches raised by Christy Corporation of Sturgeon Bay, Wisconsin. In 1961 the Sensibar was lengthened to 611 feet (186 meters) by American Shipbuilding Company of South Chicago, Illinois.

In 1981 the Sensibar was sold to Johnstone Shipping Ltd. of Toronto, Ontario affiliate of Ship Repairs & Supplies Ltd., and renamed Conallison. She was primarily used for carrying coal from Lake Erie ports to ports on the St. Lawrence River. She did not operate through the 1982 shipping season.

Layup

In 1983 the Conallison was laid up and sold for scrap to Marine Salvage Ltd. of Port Colborne, Ontario. She was later resold to a Spanish scrapyard, leaving Quebec with the steamer George M. Carl towed by the Polish tug Koral. The vessels arrived in Avilés, Spain on September 17, 1984.