Vertebral level-dependent, angular, and linear translations of the spine have been measured in 2D and 3D using several imaging methods to quantify postural changes due to loading conditions and tasks. Here, we propose and validate a semiautomated method for measuring lumbar intervertebral angles and translations from upright MRI images using an endplate-based, joint coordinate system (JCS). This method was validated using 3D printed structures, representing intervertebral discs (IVD) at predetermined angles and heights, which were positioned between adjacent cadaveric vertebrae as a gold standard. Excellent agreement between our measurements and the gold standard was found for intervertebral angles in all anatomical planes (ICC > .997) and intervertebral distance measurements (ICC > .949). The proposed endplate-based JCS was compared with the vertebral body-based JCS proposed by the International Society of Biomechanics (ISB) using the 3D printed structures placed between 3 adjacent vertebrae from a cadaver with scoliosis. The endplate-based method was found to have better agreement with angles in the sagittal plane (ICC = 0.985) compared with the vertebral body-based method (ICC = .280). Thus, this method is accurate for measuring 3D intervertebral angles in the healthy and diseased lumbar spine.

Monitoring posture and movement accurately and efficiently is essential for both physical therapy and athletic training evaluation and interventions. Motion Tape (MT), a self-adhesive wearable skin-strain sensor made of piezoresistive graphene nanosheets (GNS), has demonstrated promise in capturing low back posture and movements. However, to address some of its limitations, this work explores alternative materials by replacing GNS with multi-walled carbon nanotubes (MWCNT). This study aimed to characterize the electromechanical properties of MWCNT-based MT. Cyclic load tests for different peak tensile strains ranging from 1% to 10% were performed on MWCNT-MT made with an aqueous ink of 2% MWCNT. Additional tests to examine load rate sensitivity and fatigue were also conducted. After characterizing the properties of MWCNT-MT, a human subject study with 10 participants was designed to test its ability to capture different postures and movements. Sets of six sensors were made from each material (GNS and MWCNT) and applied in pairs at three levels along each side of the lumbar spine. To record movement of the lower back, all participants performed forward flexion, left and right bending, and left and right rotation movements. The results showed that MWCNT-MT exceeded GNS-MT with respect to consistency of signal stability even when strain limits were surpassed. In addition, both types of MT could assess lower back movements.

BACKGROUND: Motion Tape (MT) is a low-profile, disposable, self-adhesive wearable sensor that measures skin strain. Preliminary studies have validated MT for measuring lower back movement. However, further analysis is needed to determine if MT can be used to measure lower back muscle engagement. The purpose of this study was to measure differences in MT strain between conditions in which the lower back muscles were relaxed versus maximally activated. METHODS: Ten participants without low back pain were tested. A matrix of six MTs was placed on the lower back, and strain data were captured under a series of conditions. The first condition was a baseline trial, in which participants lay prone and the muscles of the lower back were relaxed. The subsequent trials were maximum voluntary isometric contractions (MVICs), in which participants did not move, but resisted the examiner force in extension or rotational directions to maximally engage their lower back muscles. The mean MT strain was calculated for each condition. A repeated measures ANOVA was conducted to analyze the effects of conditions (baseline, extension, right rotation, and left rotation) and MT position (1-6) on the MT strain. Post hoc analyses were conducted for significant effects from the overall analysis. RESULTS: The results of the ANOVA revealed a significant main effect of condition (p < 0.001) and a significant interaction effect of sensor and condition (p = 0.01). There were significant differences in MT strain between the baseline condition and the extension and rotation MVIC conditions, respectively, for sensors 4, 5, and 6 (p = 0.01-0.04). The largest differences in MT strain were observed between baseline and rotation conditions for sensors 4, 5, and 6. CONCLUSIONS: MT can capture maximal lower back muscle engagement while the trunk remains in a stationary position. Lower sensors are better able to capture muscle engagement than upper sensors. Furthermore, MT captured muscle engagement during rotation conditions better than during extension.

BACKGROUND: Low back pain (LBP) is a significant public health problem that can result in physical disability and financial burden for the individual and society. Physical therapy is effective for managing LBP and includes evaluation of posture and movement, interventions directed at modifying posture and movement, and prescription of exercises. However, physical therapists have limited tools for objective evaluation of low back posture and movement and monitoring of exercises, and this evaluation is limited to the time frame of a clinical encounter. There is a need for a valid tool that can be used to evaluate low back posture and movement and monitor exercises outside the clinic. To address this need, a fabric-based, wearable sensor, Motion Tape (MT), was developed and adapted for a low back use case. MT is a low-profile, disposable, self-adhesive, skin-strain sensor developed by spray coating piezoresistive graphene nanocomposites directly onto commercial kinesiology tape. OBJECTIVE: The objectives of this study were to (1) validate MT for measuring low back posture and movement and (2) assess the acceptability of MT for users. METHODS: A total of 10 participants without LBP were tested. A 3D optical motion capture system was used as a reference standard to measure low back kinematics. Retroreflective markers and a matrix of MTs were placed on the low back to measure kinematics (motion capture) and strain (MT) simultaneously during low back movements in the sagittal, frontal, and axial planes. Cross-correlation coefficients were calculated to evaluate the concurrent validity of MT strain in reference motion capture kinematics during each movement. The acceptability of MT was assessed using semistructured interviews conducted with each participant after laboratory testing. Interview data were analyzed using rapid qualitative analysis to identify themes and subthemes of user acceptability. RESULTS: Visual inspection of concurrent MT strain and kinematics of the low back indicated that MT can distinguish between different movement directions. Cross-correlation coefficients between MT strain and motion capture kinematics ranged from -0.915 to 0.983, and the strength of the correlations varied across MT placements and low back movement directions. Regarding user acceptability, participants expressed enthusiasm toward MT and believed that it would be helpful for remote interventions for LBP but provided suggestions for improvement. CONCLUSIONS: MT was able to distinguish between different low back movements, and most MTs demonstrated moderate to high correlation with motion capture kinematics. This preliminary laboratory validation of MT provides a basis for future device improvements, which will also involve testing in a free-living environment. Overall, users found MT acceptable for use in physical therapy for managing LBP.

Study design

Retrospective chart analysis of 199 individuals aged 18 to 80 years scheduled for lumbar spine surgery.

Objective

The purpose of this study was to quantify changes in muscle cross-sectional area (CSA) and fat signal fraction (FSF) with age in men and women with lumbar spine pathology and compare them to published normative data.

Summary of background data

Pathological changes in lumbar paraspinal muscle are often confounded by age-related decline in muscle size (CSA) and quality (fatty infiltration). Individuals with pathology have been shown to have decreased CSA and fatty infiltration of both the multifidus and erector spinae muscles, but the magnitude of these changes in the context of normal aging is unknown.

Methods

Individuals aged 18 to 80 years who were scheduled for lumbar surgery for diagnoses associated with lumbar spine pain or pathology were included. Muscle CSA and FSF of the multifidus and erector spinae were measured from preoperative T2-weighted magnetic resonance images at the L4 level. Univariate and multiple linear regression analyses were performed for each outcome using age and sex as predictor variables. Statistical comparisons of univariate regression parameters (slope and intercept) to published normative data were also performed.

Results

There was no change in CSA with age in either sex (P > 0.05), but women had lower CSAs than men in both muscles (P < 0.0001). There was an increase in FSF with age in erector spinae and multifidus muscles in both sexes (P < 0.0001). Multifidus FSF values were higher in women with lumbar spine pathology than published values for healthy controls (P = 0.03), and slopes tended to be steeper with pathology for both muscles in women (P < 0.08) but not in men (P > 0.31).

Conclusion

Lumbar muscle fat content, but not CSA, changes with age in individuals with pathology. In women, this increase is more profound than age-related increases in healthy individuals.

Level of evidence

3.

Low back pain has a 70% higher prevalence in members of the armed forces than in the general population, possibly due to the loads and positions soldiers experience during training and combat. Although the influence of heavy load carriage on standing lumbar spine posture in this population is known, postures in other operationally relevant positions are unknown. Therefore, the purpose of this study was to characterize the effect of simulated military operational positions under relevant loading conditions on global and local lumbar spine postures in active duty male US Marines. Secondary objectives were to evaluate if intervertebral disc degeneration and low back pain affect lumbar spine postures. Magnetic resonance images were acquired on an upright scanner in the following operational positions: Natural standing with no external load, standing with body armor (11.3 kg), sitting with body armor, and prone on elbows with body armor. Custom software was used to measure global lumbar spine posture: Lumbosacral flexion, sacral slope, lordosis, local measures of intervertebral angles, and intervertebral distances. Sitting resulted in decreased lumbar lordosis at all levels of the spine except L1-L2. When subjects were prone on elbows, a significant increase in local lordosis was observed only at L5-S1 compared with all other positions. Marines with disc degeneration (77%) or history of low back pain (72%) had decreased lumbar range of motion and less lumbar extension than healthy Marines. These results indicate that a male Marine's pathology undergoes a stereotypic set of postural changes during functional tasks, which may impair performance. © 2017 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 35:2145-2153, 2017.