Diy table saw jigs

Thin Strip Jig for the Table Saw: So at the time of making this jig I knew I was going to need to cut A LOT of thin strips of wood for a big project. And this jig does the job great! It allows you to cut as many strips of wood that are the same thickness as you can. All without movi…

Easy Table Saw Sled: A table saw sled (or cross cut sled) makes cutting wood against the grain safer, and much easier. There are lots of technical ways to approach making a table saw sled, but sometimes you just need a simple and elegant solution to a problem. This is p…

Get more out of your table saw with these four handy jigs. These simple jigs take advantage of the table saw’s speed and accuracy without tempting you to perform risky operations.

One of the most useful jigs you can make for your shop is a table saw sled. You can make yours using one of the many plans that you find online.

For the type of cuts that happen often, it makes sense to make a few go-to jigs to help with those annoying set-ups. Here are a few table saw jigs you should have in the shop.

Here’s a classic jig for cutting angled parts on your table saw. Build it from two 30-in. long x 2-1/2 in. wide boards connected on one end.

One of the essential accessories that should accompany your table saw is a fence. Once you get this equipment, it is true that it comes with a supplied fence fr

Learn how jointing on the table saw can be an effective work around for straightening edges using a shop-made jig you can joint on your table saw.

To make a good cut, a steady hand is important, but a reliable fence on your table saw is key. I remember the first time I tried to rip a piece of wood without a proper fence; it was a mess. Wobbly lines and uneven cuts were all I got. That's when I decided to build my own table saw fence. It took some trial and error, but finally, I crafted something that actually worked. The difference in the accuracy of my cuts was night and day. Building my own fence wasn't just about saving money. It…

Here's an overview of my four favorite table saw sleds. With a little imagination and ingenuity you’ll be able to adapt those you need for use in your...