Pallet dog cage diy

See every step of this build in this 5-part series Part 1 – Dimensions, Materials, and Start Build See how to take all of your measurements, the full materials list, all of the tools you’ll need, and the first steps in the actual build. Part 2 – Add Rails to Top and Bottom See how […]

See how to add the upright supports to the top and bottom plywood for our pallet board crate in Part 3 of this build series. See the Whole Series This 5 part series takes you step-by-step through building this crate.See the whole build series in order here In Part 1 we took our measurements and […]

See how easy and fast it is to make this rustic crate with hinged door to use as a dog kennel or storage case using pallet boards and scrap plywood. See the Whole Series This 5 part series takes you step-by-step through building this crate.See the whole build series in order here Part 1 In […]

I was in need of a table in the den after putting my tv on the wall and removing my old 90's entertainment center. I also wanted to free up the space used by my dogs crate in the room. So I combined the two with my first pallet project.

I needed a larger dog crate for my ever growing puppy but no space for the standard type. I also needed it to serve as an additional table for storage. I used leftover barn wood for the top, pallet wood for the bottom, and recycled hinges and lock. The top was finished with polyacrylic Minwax.... #Dogs, #PalletDoghouse, #RecyclingWoodPallets #AnimalPalletHousesPalletSupplies

A friend of mine had built a new deck. But her dog Lilly wanted to always sit on her lap so she could see over the railing. Mind you that Lilly isn't a little girl. So my friend had brought me some of her lumber she had left over and asked me to work my magic! I needed to build Lilly her own deck throne! I had 2 pieces of lumber and this pallet. I had to dig up my un-used math skills from back in the day and figure how big I could make this. Legs=16in Ends=24in Sides=36in I thought by gosh…