Wire-arc cladding to put worn industrial parts back in service
Robotic WAAM toolpaths for one-off repair geometry — variable bead width, surface-following passes, fixture-aware reachability.
Continuous fiber laid along the load
Toolpath generation for continuous fiber-reinforced printing, with fiber continuity optimization and load-path alignment to maximize structural performance.
Reduce lead times with LFAM mould printing
large-format mould printing, with process-specific strategies for dimensional stability, surface quality, and reduced post-machining.
Patient-specific devices in flexible materials.
Non-planar toolpaths for form-fitting medical devices with complex organic geometries. Print along body contours in TPU and other elastomers for smoother surfaces, better conformity, and fewer supports.
Concrete printing that respects cure time and reinforcement.
Layer-time-aware path planning, reinforcement-aware seam placement, multi-axis paths for non-planar walls. Pre-fab to full envelopes.
Automated multi-axis slicing: from CAD to toolpath without manual tuning.
The pipeline that turns complex 3D models into production-ready multi-axis toolpaths. Geometric analysis, intelligent segmentation, and ML-driven strategy selection, fully automated.